atl1.c 99.7 KB
Newer Older
J
Jay Cliburn 已提交
1 2
/*
 * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
3
 * Copyright(c) 2006 - 2007 Chris Snook <csnook@redhat.com>
J
Jay Cliburn 已提交
4
 * Copyright(c) 2006 - 2008 Jay Cliburn <jcliburn@gmail.com>
J
Jay Cliburn 已提交
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
 *
 * Derived from Intel e1000 driver
 * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the Free
 * Software Foundation; either version 2 of the License, or (at your option)
 * any later version.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc., 59
 * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 *
 * The full GNU General Public License is included in this distribution in the
 * file called COPYING.
 *
 * Contact Information:
J
Jay Cliburn 已提交
27 28
 * Xiong Huang <xiong.huang@atheros.com>
 * Jie Yang <jie.yang@atheros.com>
J
Jay Cliburn 已提交
29 30 31
 * Chris Snook <csnook@redhat.com>
 * Jay Cliburn <jcliburn@gmail.com>
 *
J
Jay Cliburn 已提交
32
 * This version is adapted from the Attansic reference driver.
J
Jay Cliburn 已提交
33 34
 *
 * TODO:
J
Jay Cliburn 已提交
35
 * Add more ethtool functions.
J
Jay Cliburn 已提交
36 37 38 39 40 41 42 43 44 45 46
 * Fix abstruse irq enable/disable condition described here:
 *	http://marc.theaimsgroup.com/?l=linux-netdev&m=116398508500553&w=2
 *
 * NEEDS TESTING:
 * VLAN
 * multicast
 * promiscuous mode
 * interrupt coalescing
 * SMP torture testing
 */

47 48 49 50 51 52 53
#include <asm/atomic.h>
#include <asm/byteorder.h>

#include <linux/compiler.h>
#include <linux/crc32.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
J
Jay Cliburn 已提交
54 55
#include <linux/etherdevice.h>
#include <linux/hardirq.h>
56 57 58
#include <linux/if_ether.h>
#include <linux/if_vlan.h>
#include <linux/in.h>
J
Jay Cliburn 已提交
59
#include <linux/interrupt.h>
60
#include <linux/ip.h>
J
Jay Cliburn 已提交
61
#include <linux/irqflags.h>
62 63 64 65 66
#include <linux/irqreturn.h>
#include <linux/jiffies.h>
#include <linux/mii.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
J
Jay Cliburn 已提交
67
#include <linux/net.h>
68 69 70
#include <linux/netdevice.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
J
Jay Cliburn 已提交
71
#include <linux/pm.h>
72 73 74 75
#include <linux/skbuff.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/string.h>
J
Jay Cliburn 已提交
76
#include <linux/tcp.h>
77 78 79
#include <linux/timer.h>
#include <linux/types.h>
#include <linux/workqueue.h>
J
Jay Cliburn 已提交
80 81 82 83 84

#include <net/checksum.h>

#include "atl1.h"

85 86
/* Temporary hack for merging atl1 and atl2 */
#include "atlx.c"
J
Jay Cliburn 已提交
87

88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225
/*
 * This is the only thing that needs to be changed to adjust the
 * maximum number of ports that the driver can manage.
 */
#define ATL1_MAX_NIC 4

#define OPTION_UNSET    -1
#define OPTION_DISABLED 0
#define OPTION_ENABLED  1

#define ATL1_PARAM_INIT { [0 ... ATL1_MAX_NIC] = OPTION_UNSET }

/*
 * Interrupt Moderate Timer in units of 2 us
 *
 * Valid Range: 10-65535
 *
 * Default Value: 100 (200us)
 */
static int __devinitdata int_mod_timer[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT;
static int num_int_mod_timer;
module_param_array_named(int_mod_timer, int_mod_timer, int,
	&num_int_mod_timer, 0);
MODULE_PARM_DESC(int_mod_timer, "Interrupt moderator timer");

#define DEFAULT_INT_MOD_CNT	100	/* 200us */
#define MAX_INT_MOD_CNT		65000
#define MIN_INT_MOD_CNT		50

struct atl1_option {
	enum { enable_option, range_option, list_option } type;
	char *name;
	char *err;
	int def;
	union {
		struct {	/* range_option info */
			int min;
			int max;
		} r;
		struct {	/* list_option info */
			int nr;
			struct atl1_opt_list {
				int i;
				char *str;
			} *p;
		} l;
	} arg;
};

static int __devinit atl1_validate_option(int *value, struct atl1_option *opt,
	struct pci_dev *pdev)
{
	if (*value == OPTION_UNSET) {
		*value = opt->def;
		return 0;
	}

	switch (opt->type) {
	case enable_option:
		switch (*value) {
		case OPTION_ENABLED:
			dev_info(&pdev->dev, "%s enabled\n", opt->name);
			return 0;
		case OPTION_DISABLED:
			dev_info(&pdev->dev, "%s disabled\n", opt->name);
			return 0;
		}
		break;
	case range_option:
		if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
			dev_info(&pdev->dev, "%s set to %i\n", opt->name,
				*value);
			return 0;
		}
		break;
	case list_option:{
			int i;
			struct atl1_opt_list *ent;

			for (i = 0; i < opt->arg.l.nr; i++) {
				ent = &opt->arg.l.p[i];
				if (*value == ent->i) {
					if (ent->str[0] != '\0')
						dev_info(&pdev->dev, "%s\n",
							ent->str);
					return 0;
				}
			}
		}
		break;

	default:
		break;
	}

	dev_info(&pdev->dev, "invalid %s specified (%i) %s\n",
		opt->name, *value, opt->err);
	*value = opt->def;
	return -1;
}

/*
 * atl1_check_options - Range Checking for Command Line Parameters
 * @adapter: board private structure
 *
 * This routine checks all command line parameters for valid user
 * input.  If an invalid value is given, or if no user specified
 * value exists, a default value is used.  The final value is stored
 * in a variable in the adapter structure.
 */
void __devinit atl1_check_options(struct atl1_adapter *adapter)
{
	struct pci_dev *pdev = adapter->pdev;
	int bd = adapter->bd_number;
	if (bd >= ATL1_MAX_NIC) {
		dev_notice(&pdev->dev, "no configuration for board#%i\n", bd);
		dev_notice(&pdev->dev, "using defaults for all values\n");
	}
	{			/* Interrupt Moderate Timer */
		struct atl1_option opt = {
			.type = range_option,
			.name = "Interrupt Moderator Timer",
			.err = "using default of "
				__MODULE_STRING(DEFAULT_INT_MOD_CNT),
			.def = DEFAULT_INT_MOD_CNT,
			.arg = {.r = {.min = MIN_INT_MOD_CNT,
					.max = MAX_INT_MOD_CNT} }
		};
		int val;
		if (num_int_mod_timer > bd) {
			val = int_mod_timer[bd];
			atl1_validate_option(&val, &opt, pdev);
			adapter->imt = (u16) val;
		} else
			adapter->imt = (u16) (opt.def);
	}
}

J
Jay Cliburn 已提交
226 227 228 229
/*
 * atl1_pci_tbl - PCI Device ID Table
 */
static const struct pci_device_id atl1_pci_tbl[] = {
230
	{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1)},
J
Jay Cliburn 已提交
231 232 233 234 235
	/* required last entry */
	{0,}
};
MODULE_DEVICE_TABLE(pci, atl1_pci_tbl);

J
Jay Cliburn 已提交
236 237 238 239 240 241 242
static const u32 atl1_default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE |
	NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP;

static int debug = -1;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Message level (0=none,...,16=all)");

J
Jay Cliburn 已提交
243
/*
J
Jay Cliburn 已提交
244 245 246
 * Reset the transmit and receive units; mask and clear all interrupts.
 * hw - Struct containing variables accessed by shared code
 * return : 0  or  idle status (if error)
J
Jay Cliburn 已提交
247
 */
J
Jay Cliburn 已提交
248
static s32 atl1_reset_hw(struct atl1_hw *hw)
J
Jay Cliburn 已提交
249
{
J
Jay Cliburn 已提交
250 251 252 253
	struct pci_dev *pdev = hw->back->pdev;
	struct atl1_adapter *adapter = hw->back;
	u32 icr;
	int i;
J
Jay Cliburn 已提交
254

J
Jay Cliburn 已提交
255 256 257 258 259 260 261 262
	/*
	 * Clear Interrupt mask to stop board from generating
	 * interrupts & Clear any pending interrupt events
	 */
	/*
	 * iowrite32(0, hw->hw_addr + REG_IMR);
	 * iowrite32(0xffffffff, hw->hw_addr + REG_ISR);
	 */
J
Jay Cliburn 已提交
263

J
Jay Cliburn 已提交
264 265 266 267 268 269 270 271
	/*
	 * Issue Soft Reset to the MAC.  This will reset the chip's
	 * transmit, receive, DMA.  It will not effect
	 * the current PCI configuration.  The global reset bit is self-
	 * clearing, and should clear within a microsecond.
	 */
	iowrite32(MASTER_CTRL_SOFT_RST, hw->hw_addr + REG_MASTER_CTRL);
	ioread32(hw->hw_addr + REG_MASTER_CTRL);
J
Jay Cliburn 已提交
272

J
Jay Cliburn 已提交
273 274
	iowrite16(1, hw->hw_addr + REG_PHY_ENABLE);
	ioread16(hw->hw_addr + REG_PHY_ENABLE);
J
Jay Cliburn 已提交
275

J
Jay Cliburn 已提交
276 277
	/* delay about 1ms */
	msleep(1);
J
Jay Cliburn 已提交
278

J
Jay Cliburn 已提交
279 280 281 282 283 284 285 286 287 288
	/* Wait at least 10ms for All module to be Idle */
	for (i = 0; i < 10; i++) {
		icr = ioread32(hw->hw_addr + REG_IDLE_STATUS);
		if (!icr)
			break;
		/* delay 1 ms */
		msleep(1);
		/* FIXME: still the right way to do this? */
		cpu_relax();
	}
J
Jay Cliburn 已提交
289

J
Jay Cliburn 已提交
290 291 292 293 294
	if (icr) {
		if (netif_msg_hw(adapter))
			dev_dbg(&pdev->dev, "ICR = 0x%x\n", icr);
		return icr;
	}
J
Jay Cliburn 已提交
295

J
Jay Cliburn 已提交
296
	return 0;
J
Jay Cliburn 已提交
297 298
}

J
Jay Cliburn 已提交
299 300 301 302 303 304
/* function about EEPROM
 *
 * check_eeprom_exist
 * return 0 if eeprom exist
 */
static int atl1_check_eeprom_exist(struct atl1_hw *hw)
J
Jay Cliburn 已提交
305
{
J
Jay Cliburn 已提交
306 307 308 309 310 311
	u32 value;
	value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
	if (value & SPI_FLASH_CTRL_EN_VPD) {
		value &= ~SPI_FLASH_CTRL_EN_VPD;
		iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
	}
J
Jay Cliburn 已提交
312

J
Jay Cliburn 已提交
313 314
	value = ioread16(hw->hw_addr + REG_PCIE_CAP_LIST);
	return ((value & 0xFF00) == 0x6C00) ? 0 : 1;
J
Jay Cliburn 已提交
315 316
}

J
Jay Cliburn 已提交
317
static bool atl1_read_eeprom(struct atl1_hw *hw, u32 offset, u32 *p_value)
J
Jay Cliburn 已提交
318
{
J
Jay Cliburn 已提交
319 320
	int i;
	u32 control;
J
Jay Cliburn 已提交
321

J
Jay Cliburn 已提交
322 323 324
	if (offset & 3)
		/* address do not align */
		return false;
J
Jay Cliburn 已提交
325

J
Jay Cliburn 已提交
326 327 328 329
	iowrite32(0, hw->hw_addr + REG_VPD_DATA);
	control = (offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT;
	iowrite32(control, hw->hw_addr + REG_VPD_CAP);
	ioread32(hw->hw_addr + REG_VPD_CAP);
J
Jay Cliburn 已提交
330

J
Jay Cliburn 已提交
331 332 333 334 335 336 337 338 339 340 341 342
	for (i = 0; i < 10; i++) {
		msleep(2);
		control = ioread32(hw->hw_addr + REG_VPD_CAP);
		if (control & VPD_CAP_VPD_FLAG)
			break;
	}
	if (control & VPD_CAP_VPD_FLAG) {
		*p_value = ioread32(hw->hw_addr + REG_VPD_DATA);
		return true;
	}
	/* timeout */
	return false;
J
Jay Cliburn 已提交
343 344
}

J
Jay Cliburn 已提交
345
/*
J
Jay Cliburn 已提交
346 347 348
 * Reads the value from a PHY register
 * hw - Struct containing variables accessed by shared code
 * reg_addr - address of the PHY register to read
J
Jay Cliburn 已提交
349
 */
J
Jay Cliburn 已提交
350
s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data)
J
Jay Cliburn 已提交
351
{
J
Jay Cliburn 已提交
352 353
	u32 val;
	int i;
J
Jay Cliburn 已提交
354

J
Jay Cliburn 已提交
355 356 357 358 359
	val = ((u32) (reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT |
		MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 <<
		MDIO_CLK_SEL_SHIFT;
	iowrite32(val, hw->hw_addr + REG_MDIO_CTRL);
	ioread32(hw->hw_addr + REG_MDIO_CTRL);
J
Jay Cliburn 已提交
360

J
Jay Cliburn 已提交
361 362 363 364 365 366 367 368 369
	for (i = 0; i < MDIO_WAIT_TIMES; i++) {
		udelay(2);
		val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
		if (!(val & (MDIO_START | MDIO_BUSY)))
			break;
	}
	if (!(val & (MDIO_START | MDIO_BUSY))) {
		*phy_data = (u16) val;
		return 0;
J
Jay Cliburn 已提交
370
	}
J
Jay Cliburn 已提交
371 372
	return ATLX_ERR_PHY;
}
J
Jay Cliburn 已提交
373

J
Jay Cliburn 已提交
374 375 376 377 378
#define CUSTOM_SPI_CS_SETUP	2
#define CUSTOM_SPI_CLK_HI	2
#define CUSTOM_SPI_CLK_LO	2
#define CUSTOM_SPI_CS_HOLD	2
#define CUSTOM_SPI_CS_HI	3
J
Jay Cliburn 已提交
379

J
Jay Cliburn 已提交
380 381 382 383
static bool atl1_spi_read(struct atl1_hw *hw, u32 addr, u32 *buf)
{
	int i;
	u32 value;
J
Jay Cliburn 已提交
384

J
Jay Cliburn 已提交
385 386
	iowrite32(0, hw->hw_addr + REG_SPI_DATA);
	iowrite32(addr, hw->hw_addr + REG_SPI_ADDR);
387

J
Jay Cliburn 已提交
388 389 390 391 392 393 394 395 396 397 398 399
	value = SPI_FLASH_CTRL_WAIT_READY |
	    (CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) <<
	    SPI_FLASH_CTRL_CS_SETUP_SHIFT | (CUSTOM_SPI_CLK_HI &
					     SPI_FLASH_CTRL_CLK_HI_MASK) <<
	    SPI_FLASH_CTRL_CLK_HI_SHIFT | (CUSTOM_SPI_CLK_LO &
					   SPI_FLASH_CTRL_CLK_LO_MASK) <<
	    SPI_FLASH_CTRL_CLK_LO_SHIFT | (CUSTOM_SPI_CS_HOLD &
					   SPI_FLASH_CTRL_CS_HOLD_MASK) <<
	    SPI_FLASH_CTRL_CS_HOLD_SHIFT | (CUSTOM_SPI_CS_HI &
					    SPI_FLASH_CTRL_CS_HI_MASK) <<
	    SPI_FLASH_CTRL_CS_HI_SHIFT | (1 & SPI_FLASH_CTRL_INS_MASK) <<
	    SPI_FLASH_CTRL_INS_SHIFT;
J
Jay Cliburn 已提交
400

J
Jay Cliburn 已提交
401
	iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
J
Jay Cliburn 已提交
402

J
Jay Cliburn 已提交
403 404 405
	value |= SPI_FLASH_CTRL_START;
	iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
	ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
J
Jay Cliburn 已提交
406

J
Jay Cliburn 已提交
407 408 409 410 411 412
	for (i = 0; i < 10; i++) {
		msleep(1);
		value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
		if (!(value & SPI_FLASH_CTRL_START))
			break;
	}
J
Jay Cliburn 已提交
413

J
Jay Cliburn 已提交
414 415
	if (value & SPI_FLASH_CTRL_START)
		return false;
J
Jay Cliburn 已提交
416

J
Jay Cliburn 已提交
417
	*buf = ioread32(hw->hw_addr + REG_SPI_DATA);
418

J
Jay Cliburn 已提交
419
	return true;
J
Jay Cliburn 已提交
420 421 422
}

/*
J
Jay Cliburn 已提交
423 424
 * get_permanent_address
 * return 0 if get valid mac address,
J
Jay Cliburn 已提交
425
 */
J
Jay Cliburn 已提交
426
static int atl1_get_permanent_address(struct atl1_hw *hw)
J
Jay Cliburn 已提交
427
{
J
Jay Cliburn 已提交
428 429 430 431 432
	u32 addr[2];
	u32 i, control;
	u16 reg;
	u8 eth_addr[ETH_ALEN];
	bool key_valid;
J
Jay Cliburn 已提交
433

J
Jay Cliburn 已提交
434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461
	if (is_valid_ether_addr(hw->perm_mac_addr))
		return 0;

	/* init */
	addr[0] = addr[1] = 0;

	if (!atl1_check_eeprom_exist(hw)) {
		reg = 0;
		key_valid = false;
		/* Read out all EEPROM content */
		i = 0;
		while (1) {
			if (atl1_read_eeprom(hw, i + 0x100, &control)) {
				if (key_valid) {
					if (reg == REG_MAC_STA_ADDR)
						addr[0] = control;
					else if (reg == (REG_MAC_STA_ADDR + 4))
						addr[1] = control;
					key_valid = false;
				} else if ((control & 0xff) == 0x5A) {
					key_valid = true;
					reg = (u16) (control >> 16);
				} else
					break;
			} else
				/* read error */
				break;
			i += 4;
J
Jay Cliburn 已提交
462
		}
J
Jay Cliburn 已提交
463 464 465 466 467 468

		*(u32 *) &eth_addr[2] = swab32(addr[0]);
		*(u16 *) &eth_addr[0] = swab16(*(u16 *) &addr[1]);
		if (is_valid_ether_addr(eth_addr)) {
			memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
			return 0;
J
Jay Cliburn 已提交
469 470
		}
	}
J
Jay Cliburn 已提交
471

J
Jay Cliburn 已提交
472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495
	/* see if SPI FLAGS exist ? */
	addr[0] = addr[1] = 0;
	reg = 0;
	key_valid = false;
	i = 0;
	while (1) {
		if (atl1_spi_read(hw, i + 0x1f000, &control)) {
			if (key_valid) {
				if (reg == REG_MAC_STA_ADDR)
					addr[0] = control;
				else if (reg == (REG_MAC_STA_ADDR + 4))
					addr[1] = control;
				key_valid = false;
			} else if ((control & 0xff) == 0x5A) {
				key_valid = true;
				reg = (u16) (control >> 16);
			} else
				/* data end */
				break;
		} else
			/* read error */
			break;
		i += 4;
	}
J
Jay Cliburn 已提交
496

J
Jay Cliburn 已提交
497 498 499 500 501 502
	*(u32 *) &eth_addr[2] = swab32(addr[0]);
	*(u16 *) &eth_addr[0] = swab16(*(u16 *) &addr[1]);
	if (is_valid_ether_addr(eth_addr)) {
		memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
		return 0;
	}
J
Jay Cliburn 已提交
503

J
Jay Cliburn 已提交
504 505 506 507 508 509 510 511 512 513 514 515 516 517
	/*
	 * On some motherboards, the MAC address is written by the
	 * BIOS directly to the MAC register during POST, and is
	 * not stored in eeprom.  If all else thus far has failed
	 * to fetch the permanent MAC address, try reading it directly.
	 */
	addr[0] = ioread32(hw->hw_addr + REG_MAC_STA_ADDR);
	addr[1] = ioread16(hw->hw_addr + (REG_MAC_STA_ADDR + 4));
	*(u32 *) &eth_addr[2] = swab32(addr[0]);
	*(u16 *) &eth_addr[0] = swab16(*(u16 *) &addr[1]);
	if (is_valid_ether_addr(eth_addr)) {
		memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
		return 0;
	}
J
Jay Cliburn 已提交
518

J
Jay Cliburn 已提交
519
	return 1;
J
Jay Cliburn 已提交
520 521
}

J
Jay Cliburn 已提交
522
/*
J
Jay Cliburn 已提交
523 524
 * Reads the adapter's MAC address from the EEPROM
 * hw - Struct containing variables accessed by shared code
J
Jay Cliburn 已提交
525
 */
J
Jay Cliburn 已提交
526
s32 atl1_read_mac_addr(struct atl1_hw *hw)
J
Jay Cliburn 已提交
527
{
J
Jay Cliburn 已提交
528
	u16 i;
J
Jay Cliburn 已提交
529

J
Jay Cliburn 已提交
530 531
	if (atl1_get_permanent_address(hw))
		random_ether_addr(hw->perm_mac_addr);
J
Jay Cliburn 已提交
532

J
Jay Cliburn 已提交
533 534 535
	for (i = 0; i < ETH_ALEN; i++)
		hw->mac_addr[i] = hw->perm_mac_addr[i];
	return 0;
J
Jay Cliburn 已提交
536 537 538
}

/*
J
Jay Cliburn 已提交
539 540 541
 * Hashes an address to determine its location in the multicast table
 * hw - Struct containing variables accessed by shared code
 * mc_addr - the multicast address to hash
J
Jay Cliburn 已提交
542
 *
J
Jay Cliburn 已提交
543 544 545 546 547 548
 * atl1_hash_mc_addr
 *  purpose
 *      set hash value for a multicast address
 *      hash calcu processing :
 *          1. calcu 32bit CRC for multicast address
 *          2. reverse crc with MSB to LSB
J
Jay Cliburn 已提交
549
 */
J
Jay Cliburn 已提交
550
u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr)
J
Jay Cliburn 已提交
551
{
J
Jay Cliburn 已提交
552 553
	u32 crc32, value = 0;
	int i;
J
Jay Cliburn 已提交
554

J
Jay Cliburn 已提交
555 556 557
	crc32 = ether_crc_le(6, mc_addr);
	for (i = 0; i < 32; i++)
		value |= (((crc32 >> i) & 1) << (31 - i));
J
Jay Cliburn 已提交
558

J
Jay Cliburn 已提交
559
	return value;
J
Jay Cliburn 已提交
560 561
}

J
Jay Cliburn 已提交
562 563 564 565 566 567
/*
 * Sets the bit in the multicast table corresponding to the hash value.
 * hw - Struct containing variables accessed by shared code
 * hash_value - Multicast address hash value
 */
void atl1_hash_set(struct atl1_hw *hw, u32 hash_value)
J
Jay Cliburn 已提交
568
{
J
Jay Cliburn 已提交
569 570 571 572 573 574 575 576 577 578 579
	u32 hash_bit, hash_reg;
	u32 mta;

	/*
	 * The HASH Table  is a register array of 2 32-bit registers.
	 * It is treated like an array of 64 bits.  We want to set
	 * bit BitArray[hash_value]. So we figure out what register
	 * the bit is in, read it, OR in the new bit, then write
	 * back the new value.  The register is determined by the
	 * upper 7 bits of the hash value and the bit within that
	 * register are determined by the lower 5 bits of the value.
J
Jay Cliburn 已提交
580
	 */
J
Jay Cliburn 已提交
581 582 583 584 585
	hash_reg = (hash_value >> 31) & 0x1;
	hash_bit = (hash_value >> 26) & 0x1F;
	mta = ioread32((hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2));
	mta |= (1 << hash_bit);
	iowrite32(mta, (hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2));
J
Jay Cliburn 已提交
586
}
J
Jay Cliburn 已提交
587

J
Jay Cliburn 已提交
588 589 590 591 592 593 594
/*
 * Writes a value to a PHY register
 * hw - Struct containing variables accessed by shared code
 * reg_addr - address of the PHY register to write
 * data - data to write to the PHY
 */
static s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data)
J
Jay Cliburn 已提交
595
{
J
Jay Cliburn 已提交
596 597
	int i;
	u32 val;
J
Jay Cliburn 已提交
598

J
Jay Cliburn 已提交
599 600 601 602 603 604
	val = ((u32) (phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT |
	    (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT |
	    MDIO_SUP_PREAMBLE |
	    MDIO_START | MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
	iowrite32(val, hw->hw_addr + REG_MDIO_CTRL);
	ioread32(hw->hw_addr + REG_MDIO_CTRL);
J
Jay Cliburn 已提交
605

J
Jay Cliburn 已提交
606 607 608 609 610
	for (i = 0; i < MDIO_WAIT_TIMES; i++) {
		udelay(2);
		val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
		if (!(val & (MDIO_START | MDIO_BUSY)))
			break;
J
Jay Cliburn 已提交
611
	}
J
Jay Cliburn 已提交
612

J
Jay Cliburn 已提交
613
	if (!(val & (MDIO_START | MDIO_BUSY)))
614
		return 0;
J
Jay Cliburn 已提交
615

J
Jay Cliburn 已提交
616 617
	return ATLX_ERR_PHY;
}
J
Jay Cliburn 已提交
618

J
Jay Cliburn 已提交
619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650
/*
 * Make L001's PHY out of Power Saving State (bug)
 * hw - Struct containing variables accessed by shared code
 * when power on, L001's PHY always on Power saving State
 * (Gigabit Link forbidden)
 */
static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw)
{
	s32 ret;
	ret = atl1_write_phy_reg(hw, 29, 0x0029);
	if (ret)
		return ret;
	return atl1_write_phy_reg(hw, 30, 0);
}

/*
 * Resets the PHY and make all config validate
 * hw - Struct containing variables accessed by shared code
 *
 * Sets bit 15 and 12 of the MII Control regiser (for F001 bug)
 */
static s32 atl1_phy_reset(struct atl1_hw *hw)
{
	struct pci_dev *pdev = hw->back->pdev;
	struct atl1_adapter *adapter = hw->back;
	s32 ret_val;
	u16 phy_data;

	if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
	    hw->media_type == MEDIA_TYPE_1000M_FULL)
		phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
	else {
J
Jay Cliburn 已提交
651 652
		switch (hw->media_type) {
		case MEDIA_TYPE_100M_FULL:
J
Jay Cliburn 已提交
653 654 655
			phy_data =
			    MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 |
			    MII_CR_RESET;
J
Jay Cliburn 已提交
656 657 658 659 660 661 662 663
			break;
		case MEDIA_TYPE_100M_HALF:
			phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
			break;
		case MEDIA_TYPE_10M_FULL:
			phy_data =
			    MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
			break;
664 665
		default:
			/* MEDIA_TYPE_10M_HALF: */
J
Jay Cliburn 已提交
666 667
			phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
			break;
J
Jay Cliburn 已提交
668 669 670
		}
	}

J
Jay Cliburn 已提交
671 672 673 674 675 676 677 678 679 680 681 682 683 684
	ret_val = atl1_write_phy_reg(hw, MII_BMCR, phy_data);
	if (ret_val) {
		u32 val;
		int i;
		/* pcie serdes link may be down! */
		if (netif_msg_hw(adapter))
			dev_dbg(&pdev->dev, "pcie phy link down\n");

		for (i = 0; i < 25; i++) {
			msleep(1);
			val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
			if (!(val & (MDIO_START | MDIO_BUSY)))
				break;
		}
J
Jay Cliburn 已提交
685

J
Jay Cliburn 已提交
686 687 688 689 690 691 692
		if ((val & (MDIO_START | MDIO_BUSY)) != 0) {
			if (netif_msg_hw(adapter))
				dev_warn(&pdev->dev,
					"pcie link down at least 25ms\n");
			return ret_val;
		}
	}
693
	return 0;
694 695
}

J
Jay Cliburn 已提交
696 697 698 699 700
/*
 * Configures PHY autoneg and flow control advertisement settings
 * hw - Struct containing variables accessed by shared code
 */
static s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw)
J
Jay Cliburn 已提交
701
{
J
Jay Cliburn 已提交
702 703 704
	s32 ret_val;
	s16 mii_autoneg_adv_reg;
	s16 mii_1000t_ctrl_reg;
J
Jay Cliburn 已提交
705

J
Jay Cliburn 已提交
706 707
	/* Read the MII Auto-Neg Advertisement Register (Address 4). */
	mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK;
J
Jay Cliburn 已提交
708

J
Jay Cliburn 已提交
709 710
	/* Read the MII 1000Base-T Control Register (Address 9). */
	mii_1000t_ctrl_reg = MII_ATLX_CR_1000T_DEFAULT_CAP_MASK;
J
Jay Cliburn 已提交
711

J
Jay Cliburn 已提交
712 713 714 715 716 717 718
	/*
	 * First we clear all the 10/100 mb speed bits in the Auto-Neg
	 * Advertisement Register (Address 4) and the 1000 mb speed bits in
	 * the  1000Base-T Control Register (Address 9).
	 */
	mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK;
	mii_1000t_ctrl_reg &= ~MII_ATLX_CR_1000T_SPEED_MASK;
J
Jay Cliburn 已提交
719

J
Jay Cliburn 已提交
720 721 722 723 724 725 726 727 728 729 730 731
	/*
	 * Need to parse media_type  and set up
	 * the appropriate PHY registers.
	 */
	switch (hw->media_type) {
	case MEDIA_TYPE_AUTO_SENSOR:
		mii_autoneg_adv_reg |= (MII_AR_10T_HD_CAPS |
					MII_AR_10T_FD_CAPS |
					MII_AR_100TX_HD_CAPS |
					MII_AR_100TX_FD_CAPS);
		mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS;
		break;
J
Jay Cliburn 已提交
732

J
Jay Cliburn 已提交
733 734 735
	case MEDIA_TYPE_1000M_FULL:
		mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS;
		break;
J
Jay Cliburn 已提交
736

J
Jay Cliburn 已提交
737 738 739
	case MEDIA_TYPE_100M_FULL:
		mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS;
		break;
J
Jay Cliburn 已提交
740

J
Jay Cliburn 已提交
741 742 743
	case MEDIA_TYPE_100M_HALF:
		mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS;
		break;
J
Jay Cliburn 已提交
744

J
Jay Cliburn 已提交
745 746
	case MEDIA_TYPE_10M_FULL:
		mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS;
J
Jay Cliburn 已提交
747
		break;
J
Jay Cliburn 已提交
748

J
Jay Cliburn 已提交
749
	default:
J
Jay Cliburn 已提交
750
		mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS;
J
Jay Cliburn 已提交
751
		break;
J
Jay Cliburn 已提交
752 753
	}

J
Jay Cliburn 已提交
754 755
	/* flow control fixed to enable all */
	mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE);
J
Jay Cliburn 已提交
756

J
Jay Cliburn 已提交
757 758
	hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg;
	hw->mii_1000t_ctrl_reg = mii_1000t_ctrl_reg;
J
Jay Cliburn 已提交
759

J
Jay Cliburn 已提交
760 761 762
	ret_val = atl1_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg);
	if (ret_val)
		return ret_val;
J
Jay Cliburn 已提交
763

J
Jay Cliburn 已提交
764 765 766
	ret_val = atl1_write_phy_reg(hw, MII_ATLX_CR, mii_1000t_ctrl_reg);
	if (ret_val)
		return ret_val;
J
Jay Cliburn 已提交
767

J
Jay Cliburn 已提交
768
	return 0;
J
Jay Cliburn 已提交
769 770
}

J
Jay Cliburn 已提交
771
/*
J
Jay Cliburn 已提交
772 773 774 775
 * Configures link settings.
 * hw - Struct containing variables accessed by shared code
 * Assumes the hardware has previously been reset and the
 * transmitter and receiver are not enabled.
J
Jay Cliburn 已提交
776
 */
J
Jay Cliburn 已提交
777
static s32 atl1_setup_link(struct atl1_hw *hw)
J
Jay Cliburn 已提交
778
{
J
Jay Cliburn 已提交
779 780 781
	struct pci_dev *pdev = hw->back->pdev;
	struct atl1_adapter *adapter = hw->back;
	s32 ret_val;
J
Jay Cliburn 已提交
782

J
Jay Cliburn 已提交
783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805
	/*
	 * Options:
	 *  PHY will advertise value(s) parsed from
	 *  autoneg_advertised and fc
	 *  no matter what autoneg is , We will not wait link result.
	 */
	ret_val = atl1_phy_setup_autoneg_adv(hw);
	if (ret_val) {
		if (netif_msg_link(adapter))
			dev_dbg(&pdev->dev,
				"error setting up autonegotiation\n");
		return ret_val;
	}
	/* SW.Reset , En-Auto-Neg if needed */
	ret_val = atl1_phy_reset(hw);
	if (ret_val) {
		if (netif_msg_link(adapter))
			dev_dbg(&pdev->dev, "error resetting phy\n");
		return ret_val;
	}
	hw->phy_configured = true;
	return ret_val;
}
J
Jay Cliburn 已提交
806

J
Jay Cliburn 已提交
807
static void atl1_init_flash_opcode(struct atl1_hw *hw)
J
Jay Cliburn 已提交
808
{
J
Jay Cliburn 已提交
809 810 811
	if (hw->flash_vendor >= ARRAY_SIZE(flash_table))
		/* Atmel */
		hw->flash_vendor = 0;
J
Jay Cliburn 已提交
812

J
Jay Cliburn 已提交
813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829
	/* Init OP table */
	iowrite8(flash_table[hw->flash_vendor].cmd_program,
		hw->hw_addr + REG_SPI_FLASH_OP_PROGRAM);
	iowrite8(flash_table[hw->flash_vendor].cmd_sector_erase,
		hw->hw_addr + REG_SPI_FLASH_OP_SC_ERASE);
	iowrite8(flash_table[hw->flash_vendor].cmd_chip_erase,
		hw->hw_addr + REG_SPI_FLASH_OP_CHIP_ERASE);
	iowrite8(flash_table[hw->flash_vendor].cmd_rdid,
		hw->hw_addr + REG_SPI_FLASH_OP_RDID);
	iowrite8(flash_table[hw->flash_vendor].cmd_wren,
		hw->hw_addr + REG_SPI_FLASH_OP_WREN);
	iowrite8(flash_table[hw->flash_vendor].cmd_rdsr,
		hw->hw_addr + REG_SPI_FLASH_OP_RDSR);
	iowrite8(flash_table[hw->flash_vendor].cmd_wrsr,
		hw->hw_addr + REG_SPI_FLASH_OP_WRSR);
	iowrite8(flash_table[hw->flash_vendor].cmd_read,
		hw->hw_addr + REG_SPI_FLASH_OP_READ);
J
Jay Cliburn 已提交
830 831
}

J
Jay Cliburn 已提交
832 833 834 835 836 837 838 839 840
/*
 * Performs basic configuration of the adapter.
 * hw - Struct containing variables accessed by shared code
 * Assumes that the controller has previously been reset and is in a
 * post-reset uninitialized state. Initializes multicast table,
 * and  Calls routines to setup link
 * Leaves the transmit and receive units disabled and uninitialized.
 */
static s32 atl1_init_hw(struct atl1_hw *hw)
J
Jay Cliburn 已提交
841
{
J
Jay Cliburn 已提交
842
	u32 ret_val = 0;
J
Jay Cliburn 已提交
843

J
Jay Cliburn 已提交
844 845 846 847
	/* Zero out the Multicast HASH table */
	iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE);
	/* clear the old settings from the multicast hash table */
	iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2));
J
Jay Cliburn 已提交
848

J
Jay Cliburn 已提交
849
	atl1_init_flash_opcode(hw);
J
Jay Cliburn 已提交
850

J
Jay Cliburn 已提交
851 852 853 854 855 856 857 858 859 860 861 862 863
	if (!hw->phy_configured) {
		/* enable GPHY LinkChange Interrrupt */
		ret_val = atl1_write_phy_reg(hw, 18, 0xC00);
		if (ret_val)
			return ret_val;
		/* make PHY out of power-saving state */
		ret_val = atl1_phy_leave_power_saving(hw);
		if (ret_val)
			return ret_val;
		/* Call a subroutine to configure the link */
		ret_val = atl1_setup_link(hw);
	}
	return ret_val;
J
Jay Cliburn 已提交
864 865 866
}

/*
J
Jay Cliburn 已提交
867 868 869 870
 * Detects the current speed and duplex settings of the hardware.
 * hw - Struct containing variables accessed by shared code
 * speed - Speed of the connection
 * duplex - Duplex setting of the connection
J
Jay Cliburn 已提交
871
 */
J
Jay Cliburn 已提交
872
static s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex)
J
Jay Cliburn 已提交
873
{
J
Jay Cliburn 已提交
874 875 876 877
	struct pci_dev *pdev = hw->back->pdev;
	struct atl1_adapter *adapter = hw->back;
	s32 ret_val;
	u16 phy_data;
J
Jay Cliburn 已提交
878

J
Jay Cliburn 已提交
879 880 881 882
	/* ; --- Read   PHY Specific Status Register (17) */
	ret_val = atl1_read_phy_reg(hw, MII_ATLX_PSSR, &phy_data);
	if (ret_val)
		return ret_val;
J
Jay Cliburn 已提交
883

J
Jay Cliburn 已提交
884 885
	if (!(phy_data & MII_ATLX_PSSR_SPD_DPLX_RESOLVED))
		return ATLX_ERR_PHY_RES;
J
Jay Cliburn 已提交
886

J
Jay Cliburn 已提交
887 888 889 890 891 892 893 894 895 896 897 898 899 900 901
	switch (phy_data & MII_ATLX_PSSR_SPEED) {
	case MII_ATLX_PSSR_1000MBS:
		*speed = SPEED_1000;
		break;
	case MII_ATLX_PSSR_100MBS:
		*speed = SPEED_100;
		break;
	case MII_ATLX_PSSR_10MBS:
		*speed = SPEED_10;
		break;
	default:
		if (netif_msg_hw(adapter))
			dev_dbg(&pdev->dev, "error getting speed\n");
		return ATLX_ERR_PHY_SPEED;
		break;
J
Jay Cliburn 已提交
902
	}
J
Jay Cliburn 已提交
903 904 905 906 907 908
	if (phy_data & MII_ATLX_PSSR_DPLX)
		*duplex = FULL_DUPLEX;
	else
		*duplex = HALF_DUPLEX;

	return 0;
J
Jay Cliburn 已提交
909
}
J
Jay Cliburn 已提交
910

J
Jay Cliburn 已提交
911
void atl1_set_mac_addr(struct atl1_hw *hw)
J
Jay Cliburn 已提交
912
{
J
Jay Cliburn 已提交
913 914 915 916 917 918 919 920 921 922 923 924 925
	u32 value;
	/*
	 * 00-0B-6A-F6-00-DC
	 * 0:  6AF600DC   1: 000B
	 * low dword
	 */
	value = (((u32) hw->mac_addr[2]) << 24) |
	    (((u32) hw->mac_addr[3]) << 16) |
	    (((u32) hw->mac_addr[4]) << 8) | (((u32) hw->mac_addr[5]));
	iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR);
	/* high dword */
	value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1]));
	iowrite32(value, (hw->hw_addr + REG_MAC_STA_ADDR) + (1 << 2));
J
Jay Cliburn 已提交
926
}
J
Jay Cliburn 已提交
927 928 929 930 931 932 933 934 935 936 937 938 939 940

/*
 * atl1_sw_init - Initialize general software structures (struct atl1_adapter)
 * @adapter: board private structure to initialize
 *
 * atl1_sw_init initializes the Adapter private data structure.
 * Fields are initialized based on PCI device information and
 * OS network device settings (MTU size).
 */
static int __devinit atl1_sw_init(struct atl1_adapter *adapter)
{
	struct atl1_hw *hw = &adapter->hw;
	struct net_device *netdev = adapter->netdev;

J
Jay Cliburn 已提交
941
	hw->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
942
	hw->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
J
Jay Cliburn 已提交
943 944 945

	adapter->wol = 0;
	adapter->rx_buffer_len = (hw->max_frame_size + 7) & ~7;
J
Jay Cliburn 已提交
946
	adapter->ict = 50000;		/* 100ms */
J
Jay Cliburn 已提交
947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985
	adapter->link_speed = SPEED_0;	/* hardware init */
	adapter->link_duplex = FULL_DUPLEX;

	hw->phy_configured = false;
	hw->preamble_len = 7;
	hw->ipgt = 0x60;
	hw->min_ifg = 0x50;
	hw->ipgr1 = 0x40;
	hw->ipgr2 = 0x60;
	hw->max_retry = 0xf;
	hw->lcol = 0x37;
	hw->jam_ipg = 7;
	hw->rfd_burst = 8;
	hw->rrd_burst = 8;
	hw->rfd_fetch_gap = 1;
	hw->rx_jumbo_th = adapter->rx_buffer_len / 8;
	hw->rx_jumbo_lkah = 1;
	hw->rrd_ret_timer = 16;
	hw->tpd_burst = 4;
	hw->tpd_fetch_th = 16;
	hw->txf_burst = 0x100;
	hw->tx_jumbo_task_th = (hw->max_frame_size + 7) >> 3;
	hw->tpd_fetch_gap = 1;
	hw->rcb_value = atl1_rcb_64;
	hw->dma_ord = atl1_dma_ord_enh;
	hw->dmar_block = atl1_dma_req_256;
	hw->dmaw_block = atl1_dma_req_256;
	hw->cmb_rrd = 4;
	hw->cmb_tpd = 4;
	hw->cmb_rx_timer = 1;	/* about 2us */
	hw->cmb_tx_timer = 1;	/* about 2us */
	hw->smb_timer = 100000;	/* about 200ms */

	spin_lock_init(&adapter->lock);
	spin_lock_init(&adapter->mb_lock);

	return 0;
}

J
Jay Cliburn 已提交
986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025
static int mdio_read(struct net_device *netdev, int phy_id, int reg_num)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
	u16 result;

	atl1_read_phy_reg(&adapter->hw, reg_num & 0x1f, &result);

	return result;
}

static void mdio_write(struct net_device *netdev, int phy_id, int reg_num,
	int val)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);

	atl1_write_phy_reg(&adapter->hw, reg_num, val);
}

/*
 * atl1_mii_ioctl -
 * @netdev:
 * @ifreq:
 * @cmd:
 */
static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
	unsigned long flags;
	int retval;

	if (!netif_running(netdev))
		return -EINVAL;

	spin_lock_irqsave(&adapter->lock, flags);
	retval = generic_mii_ioctl(&adapter->mii, if_mii(ifr), cmd, NULL);
	spin_unlock_irqrestore(&adapter->lock, flags);

	return retval;
}

J
Jay Cliburn 已提交
1026 1027 1028 1029 1030 1031
/*
 * atl1_setup_mem_resources - allocate Tx / RX descriptor resources
 * @adapter: board private structure
 *
 * Return 0 on success, negative on failure
 */
J
Jay Cliburn 已提交
1032
static s32 atl1_setup_ring_resources(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044
{
	struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
	struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
	struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
	struct atl1_ring_header *ring_header = &adapter->ring_header;
	struct pci_dev *pdev = adapter->pdev;
	int size;
	u8 offset = 0;

	size = sizeof(struct atl1_buffer) * (tpd_ring->count + rfd_ring->count);
	tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL);
	if (unlikely(!tpd_ring->buffer_info)) {
J
Jay Cliburn 已提交
1045 1046 1047
		if (netif_msg_drv(adapter))
			dev_err(&pdev->dev, "kzalloc failed , size = D%d\n",
				size);
J
Jay Cliburn 已提交
1048 1049 1050
		goto err_nomem;
	}
	rfd_ring->buffer_info =
J
Jay Cliburn 已提交
1051
		(struct atl1_buffer *)(tpd_ring->buffer_info + tpd_ring->count);
J
Jay Cliburn 已提交
1052

J
Jay Cliburn 已提交
1053 1054
	/*
	 * real ring DMA buffer
J
Jay Cliburn 已提交
1055 1056 1057 1058 1059 1060 1061 1062 1063 1064
	 * each ring/block may need up to 8 bytes for alignment, hence the
	 * additional 40 bytes tacked onto the end.
	 */
	ring_header->size = size =
		sizeof(struct tx_packet_desc) * tpd_ring->count
		+ sizeof(struct rx_free_desc) * rfd_ring->count
		+ sizeof(struct rx_return_desc) * rrd_ring->count
		+ sizeof(struct coals_msg_block)
		+ sizeof(struct stats_msg_block)
		+ 40;
J
Jay Cliburn 已提交
1065 1066

	ring_header->desc = pci_alloc_consistent(pdev, ring_header->size,
J
Jay Cliburn 已提交
1067
		&ring_header->dma);
J
Jay Cliburn 已提交
1068
	if (unlikely(!ring_header->desc)) {
J
Jay Cliburn 已提交
1069 1070
		if (netif_msg_drv(adapter))
			dev_err(&pdev->dev, "pci_alloc_consistent failed\n");
J
Jay Cliburn 已提交
1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088
		goto err_nomem;
	}

	memset(ring_header->desc, 0, ring_header->size);

	/* init TPD ring */
	tpd_ring->dma = ring_header->dma;
	offset = (tpd_ring->dma & 0x7) ? (8 - (ring_header->dma & 0x7)) : 0;
	tpd_ring->dma += offset;
	tpd_ring->desc = (u8 *) ring_header->desc + offset;
	tpd_ring->size = sizeof(struct tx_packet_desc) * tpd_ring->count;

	/* init RFD ring */
	rfd_ring->dma = tpd_ring->dma + tpd_ring->size;
	offset = (rfd_ring->dma & 0x7) ? (8 - (rfd_ring->dma & 0x7)) : 0;
	rfd_ring->dma += offset;
	rfd_ring->desc = (u8 *) tpd_ring->desc + (tpd_ring->size + offset);
	rfd_ring->size = sizeof(struct rx_free_desc) * rfd_ring->count;
1089

J
Jay Cliburn 已提交
1090 1091 1092 1093 1094 1095 1096

	/* init RRD ring */
	rrd_ring->dma = rfd_ring->dma + rfd_ring->size;
	offset = (rrd_ring->dma & 0x7) ? (8 - (rrd_ring->dma & 0x7)) : 0;
	rrd_ring->dma += offset;
	rrd_ring->desc = (u8 *) rfd_ring->desc + (rfd_ring->size + offset);
	rrd_ring->size = sizeof(struct rx_return_desc) * rrd_ring->count;
1097

J
Jay Cliburn 已提交
1098 1099 1100 1101 1102

	/* init CMB */
	adapter->cmb.dma = rrd_ring->dma + rrd_ring->size;
	offset = (adapter->cmb.dma & 0x7) ? (8 - (adapter->cmb.dma & 0x7)) : 0;
	adapter->cmb.dma += offset;
J
Jay Cliburn 已提交
1103 1104
	adapter->cmb.cmb = (struct coals_msg_block *)
		((u8 *) rrd_ring->desc + (rrd_ring->size + offset));
J
Jay Cliburn 已提交
1105 1106 1107 1108 1109 1110

	/* init SMB */
	adapter->smb.dma = adapter->cmb.dma + sizeof(struct coals_msg_block);
	offset = (adapter->smb.dma & 0x7) ? (8 - (adapter->smb.dma & 0x7)) : 0;
	adapter->smb.dma += offset;
	adapter->smb.smb = (struct stats_msg_block *)
J
Jay Cliburn 已提交
1111 1112
		((u8 *) adapter->cmb.cmb +
		(sizeof(struct coals_msg_block) + offset));
J
Jay Cliburn 已提交
1113

J
Jay Cliburn 已提交
1114
	return 0;
J
Jay Cliburn 已提交
1115 1116 1117 1118 1119 1120

err_nomem:
	kfree(tpd_ring->buffer_info);
	return -ENOMEM;
}

1121
static void atl1_init_ring_ptrs(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1122
{
1123 1124 1125
	struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
	struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
	struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
J
Jay Cliburn 已提交
1126

1127 1128
	atomic_set(&tpd_ring->next_to_use, 0);
	atomic_set(&tpd_ring->next_to_clean, 0);
J
Jay Cliburn 已提交
1129

1130 1131 1132 1133 1134
	rfd_ring->next_to_clean = 0;
	atomic_set(&rfd_ring->next_to_use, 0);

	rrd_ring->next_to_use = 0;
	atomic_set(&rrd_ring->next_to_clean, 0);
J
Jay Cliburn 已提交
1135 1136 1137
}

/*
J
Jay Cliburn 已提交
1138
 * atl1_clean_rx_ring - Free RFD Buffers
J
Jay Cliburn 已提交
1139 1140
 * @adapter: board private structure
 */
J
Jay Cliburn 已提交
1141
static void atl1_clean_rx_ring(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1142
{
J
Jay Cliburn 已提交
1143 1144 1145 1146 1147 1148
	struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
	struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
	struct atl1_buffer *buffer_info;
	struct pci_dev *pdev = adapter->pdev;
	unsigned long size;
	unsigned int i;
J
Jay Cliburn 已提交
1149

J
Jay Cliburn 已提交
1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162
	/* Free all the Rx ring sk_buffs */
	for (i = 0; i < rfd_ring->count; i++) {
		buffer_info = &rfd_ring->buffer_info[i];
		if (buffer_info->dma) {
			pci_unmap_page(pdev, buffer_info->dma,
				buffer_info->length, PCI_DMA_FROMDEVICE);
			buffer_info->dma = 0;
		}
		if (buffer_info->skb) {
			dev_kfree_skb(buffer_info->skb);
			buffer_info->skb = NULL;
		}
	}
J
Jay Cliburn 已提交
1163

J
Jay Cliburn 已提交
1164 1165
	size = sizeof(struct atl1_buffer) * rfd_ring->count;
	memset(rfd_ring->buffer_info, 0, size);
J
Jay Cliburn 已提交
1166

J
Jay Cliburn 已提交
1167 1168
	/* Zero out the descriptor ring */
	memset(rfd_ring->desc, 0, rfd_ring->size);
J
Jay Cliburn 已提交
1169

J
Jay Cliburn 已提交
1170 1171
	rfd_ring->next_to_clean = 0;
	atomic_set(&rfd_ring->next_to_use, 0);
J
Jay Cliburn 已提交
1172

J
Jay Cliburn 已提交
1173 1174
	rrd_ring->next_to_use = 0;
	atomic_set(&rrd_ring->next_to_clean, 0);
J
Jay Cliburn 已提交
1175 1176
}

J
Jay Cliburn 已提交
1177 1178 1179 1180 1181
/*
 * atl1_clean_tx_ring - Free Tx Buffers
 * @adapter: board private structure
 */
static void atl1_clean_tx_ring(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1182
{
J
Jay Cliburn 已提交
1183 1184
	struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
	struct atl1_buffer *buffer_info;
J
Jay Cliburn 已提交
1185
	struct pci_dev *pdev = adapter->pdev;
J
Jay Cliburn 已提交
1186 1187
	unsigned long size;
	unsigned int i;
J
Jay Cliburn 已提交
1188

J
Jay Cliburn 已提交
1189 1190 1191 1192 1193 1194 1195
	/* Free all the Tx ring sk_buffs */
	for (i = 0; i < tpd_ring->count; i++) {
		buffer_info = &tpd_ring->buffer_info[i];
		if (buffer_info->dma) {
			pci_unmap_page(pdev, buffer_info->dma,
				buffer_info->length, PCI_DMA_TODEVICE);
			buffer_info->dma = 0;
J
Jay Cliburn 已提交
1196 1197 1198
		}
	}

J
Jay Cliburn 已提交
1199 1200 1201 1202 1203
	for (i = 0; i < tpd_ring->count; i++) {
		buffer_info = &tpd_ring->buffer_info[i];
		if (buffer_info->skb) {
			dev_kfree_skb_any(buffer_info->skb);
			buffer_info->skb = NULL;
J
Jay Cliburn 已提交
1204 1205 1206
		}
	}

J
Jay Cliburn 已提交
1207 1208
	size = sizeof(struct atl1_buffer) * tpd_ring->count;
	memset(tpd_ring->buffer_info, 0, size);
J
Jay Cliburn 已提交
1209

J
Jay Cliburn 已提交
1210 1211
	/* Zero out the descriptor ring */
	memset(tpd_ring->desc, 0, tpd_ring->size);
J
Jay Cliburn 已提交
1212

J
Jay Cliburn 已提交
1213 1214
	atomic_set(&tpd_ring->next_to_use, 0);
	atomic_set(&tpd_ring->next_to_clean, 0);
J
Jay Cliburn 已提交
1215 1216 1217
}

/*
J
Jay Cliburn 已提交
1218 1219 1220 1221
 * atl1_free_ring_resources - Free Tx / RX descriptor Resources
 * @adapter: board private structure
 *
 * Free all transmit software resources
J
Jay Cliburn 已提交
1222
 */
J
Jay Cliburn 已提交
1223
static void atl1_free_ring_resources(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1224 1225
{
	struct pci_dev *pdev = adapter->pdev;
J
Jay Cliburn 已提交
1226 1227 1228 1229
	struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
	struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
	struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
	struct atl1_ring_header *ring_header = &adapter->ring_header;
J
Jay Cliburn 已提交
1230

J
Jay Cliburn 已提交
1231 1232
	atl1_clean_tx_ring(adapter);
	atl1_clean_rx_ring(adapter);
J
Jay Cliburn 已提交
1233

J
Jay Cliburn 已提交
1234 1235 1236
	kfree(tpd_ring->buffer_info);
	pci_free_consistent(pdev, ring_header->size, ring_header->desc,
		ring_header->dma);
J
Jay Cliburn 已提交
1237

J
Jay Cliburn 已提交
1238 1239 1240
	tpd_ring->buffer_info = NULL;
	tpd_ring->desc = NULL;
	tpd_ring->dma = 0;
J
Jay Cliburn 已提交
1241

J
Jay Cliburn 已提交
1242 1243 1244
	rfd_ring->buffer_info = NULL;
	rfd_ring->desc = NULL;
	rfd_ring->dma = 0;
J
Jay Cliburn 已提交
1245

J
Jay Cliburn 已提交
1246 1247
	rrd_ring->desc = NULL;
	rrd_ring->dma = 0;
J
Jay Cliburn 已提交
1248 1249
}

J
Jay Cliburn 已提交
1250
static void atl1_setup_mac_ctrl(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1251 1252
{
	u32 value;
J
Jay Cliburn 已提交
1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286
	struct atl1_hw *hw = &adapter->hw;
	struct net_device *netdev = adapter->netdev;
	/* Config MAC CTRL Register */
	value = MAC_CTRL_TX_EN | MAC_CTRL_RX_EN;
	/* duplex */
	if (FULL_DUPLEX == adapter->link_duplex)
		value |= MAC_CTRL_DUPLX;
	/* speed */
	value |= ((u32) ((SPEED_1000 == adapter->link_speed) ?
			 MAC_CTRL_SPEED_1000 : MAC_CTRL_SPEED_10_100) <<
		  MAC_CTRL_SPEED_SHIFT);
	/* flow control */
	value |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW);
	/* PAD & CRC */
	value |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD);
	/* preamble length */
	value |= (((u32) adapter->hw.preamble_len
		   & MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT);
	/* vlan */
	if (adapter->vlgrp)
		value |= MAC_CTRL_RMV_VLAN;
	/* rx checksum
	   if (adapter->rx_csum)
	   value |= MAC_CTRL_RX_CHKSUM_EN;
	 */
	/* filter mode */
	value |= MAC_CTRL_BC_EN;
	if (netdev->flags & IFF_PROMISC)
		value |= MAC_CTRL_PROMIS_EN;
	else if (netdev->flags & IFF_ALLMULTI)
		value |= MAC_CTRL_MC_ALL_EN;
	/* value |= MAC_CTRL_LOOPBACK; */
	iowrite32(value, hw->hw_addr + REG_MAC_CTRL);
}
J
Jay Cliburn 已提交
1287

J
Jay Cliburn 已提交
1288 1289 1290 1291 1292 1293 1294
static u32 atl1_check_link(struct atl1_adapter *adapter)
{
	struct atl1_hw *hw = &adapter->hw;
	struct net_device *netdev = adapter->netdev;
	u32 ret_val;
	u16 speed, duplex, phy_data;
	int reconfig = 0;
J
Jay Cliburn 已提交
1295

J
Jay Cliburn 已提交
1296 1297 1298
	/* MII_BMSR must read twice */
	atl1_read_phy_reg(hw, MII_BMSR, &phy_data);
	atl1_read_phy_reg(hw, MII_BMSR, &phy_data);
J
Jay Cliburn 已提交
1299 1300 1301 1302 1303 1304
	if (!(phy_data & BMSR_LSTATUS)) {
		/* link down */
		if (netif_carrier_ok(netdev)) {
			/* old link state: Up */
			if (netif_msg_link(adapter))
				dev_info(&adapter->pdev->dev, "link is down\n");
J
Jay Cliburn 已提交
1305 1306
			adapter->link_speed = SPEED_0;
			netif_carrier_off(netdev);
J
Jay Cliburn 已提交
1307
		}
J
Jay Cliburn 已提交
1308
		return 0;
J
Jay Cliburn 已提交
1309 1310
	}

J
Jay Cliburn 已提交
1311 1312 1313 1314
	/* Link Up */
	ret_val = atl1_get_speed_and_duplex(hw, &speed, &duplex);
	if (ret_val)
		return ret_val;
J
Jay Cliburn 已提交
1315

J
Jay Cliburn 已提交
1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337
	switch (hw->media_type) {
	case MEDIA_TYPE_1000M_FULL:
		if (speed != SPEED_1000 || duplex != FULL_DUPLEX)
			reconfig = 1;
		break;
	case MEDIA_TYPE_100M_FULL:
		if (speed != SPEED_100 || duplex != FULL_DUPLEX)
			reconfig = 1;
		break;
	case MEDIA_TYPE_100M_HALF:
		if (speed != SPEED_100 || duplex != HALF_DUPLEX)
			reconfig = 1;
		break;
	case MEDIA_TYPE_10M_FULL:
		if (speed != SPEED_10 || duplex != FULL_DUPLEX)
			reconfig = 1;
		break;
	case MEDIA_TYPE_10M_HALF:
		if (speed != SPEED_10 || duplex != HALF_DUPLEX)
			reconfig = 1;
		break;
	}
J
Jay Cliburn 已提交
1338

J
Jay Cliburn 已提交
1339 1340 1341 1342 1343 1344 1345
	/* link result is our setting */
	if (!reconfig) {
		if (adapter->link_speed != speed
		    || adapter->link_duplex != duplex) {
			adapter->link_speed = speed;
			adapter->link_duplex = duplex;
			atl1_setup_mac_ctrl(adapter);
J
Jay Cliburn 已提交
1346 1347 1348 1349 1350 1351
			if (netif_msg_link(adapter))
				dev_info(&adapter->pdev->dev,
					"%s link is up %d Mbps %s\n",
					netdev->name, adapter->link_speed,
					adapter->link_duplex == FULL_DUPLEX ?
					"full duplex" : "half duplex");
J
Jay Cliburn 已提交
1352
		}
J
Jay Cliburn 已提交
1353 1354
		if (!netif_carrier_ok(netdev)) {
			/* Link down -> Up */
J
Jay Cliburn 已提交
1355 1356
			netif_carrier_on(netdev);
		}
J
Jay Cliburn 已提交
1357
		return 0;
J
Jay Cliburn 已提交
1358 1359
	}

J
Jay Cliburn 已提交
1360
	/* change original link status */
J
Jay Cliburn 已提交
1361 1362 1363 1364
	if (netif_carrier_ok(netdev)) {
		adapter->link_speed = SPEED_0;
		netif_carrier_off(netdev);
		netif_stop_queue(netdev);
J
Jay Cliburn 已提交
1365 1366
	}

J
Jay Cliburn 已提交
1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380
	if (hw->media_type != MEDIA_TYPE_AUTO_SENSOR &&
	    hw->media_type != MEDIA_TYPE_1000M_FULL) {
		switch (hw->media_type) {
		case MEDIA_TYPE_100M_FULL:
			phy_data = MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 |
			           MII_CR_RESET;
			break;
		case MEDIA_TYPE_100M_HALF:
			phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
			break;
		case MEDIA_TYPE_10M_FULL:
			phy_data =
			    MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
			break;
J
Jay Cliburn 已提交
1381 1382
		default:
			/* MEDIA_TYPE_10M_HALF: */
J
Jay Cliburn 已提交
1383 1384
			phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
			break;
J
Jay Cliburn 已提交
1385
		}
J
Jay Cliburn 已提交
1386
		atl1_write_phy_reg(hw, MII_BMCR, phy_data);
J
Jay Cliburn 已提交
1387
		return 0;
J
Jay Cliburn 已提交
1388 1389
	}

J
Jay Cliburn 已提交
1390 1391 1392 1393
	/* auto-neg, insert timer to re-config phy */
	if (!adapter->phy_timer_pending) {
		adapter->phy_timer_pending = true;
		mod_timer(&adapter->phy_config_timer, jiffies + 3 * HZ);
J
Jay Cliburn 已提交
1394 1395
	}

J
Jay Cliburn 已提交
1396 1397
	return 0;
}
J
Jay Cliburn 已提交
1398

J
Jay Cliburn 已提交
1399 1400 1401
static void set_flow_ctrl_old(struct atl1_adapter *adapter)
{
	u32 hi, lo, value;
J
Jay Cliburn 已提交
1402

J
Jay Cliburn 已提交
1403 1404 1405 1406 1407 1408
	/* RFD Flow Control */
	value = adapter->rfd_ring.count;
	hi = value / 16;
	if (hi < 2)
		hi = 2;
	lo = value * 7 / 8;
J
Jay Cliburn 已提交
1409

J
Jay Cliburn 已提交
1410 1411 1412
	value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) |
		((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT);
	iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RXF_PAUSE_THRESH);
J
Jay Cliburn 已提交
1413

J
Jay Cliburn 已提交
1414 1415 1416 1417 1418 1419 1420 1421 1422 1423
	/* RRD Flow Control */
	value = adapter->rrd_ring.count;
	lo = value / 16;
	hi = value * 7 / 8;
	if (lo < 2)
		lo = 2;
	value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) |
		((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT);
	iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RRD_PAUSE_THRESH);
}
J
Jay Cliburn 已提交
1424

J
Jay Cliburn 已提交
1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477
static void set_flow_ctrl_new(struct atl1_hw *hw)
{
	u32 hi, lo, value;

	/* RXF Flow Control */
	value = ioread32(hw->hw_addr + REG_SRAM_RXF_LEN);
	lo = value / 16;
	if (lo < 192)
		lo = 192;
	hi = value * 7 / 8;
	if (hi < lo)
		hi = lo + 16;
	value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) |
		((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT);
	iowrite32(value, hw->hw_addr + REG_RXQ_RXF_PAUSE_THRESH);

	/* RRD Flow Control */
	value = ioread32(hw->hw_addr + REG_SRAM_RRD_LEN);
	lo = value / 8;
	hi = value * 7 / 8;
	if (lo < 2)
		lo = 2;
	if (hi < lo)
		hi = lo + 3;
	value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) |
		((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT);
	iowrite32(value, hw->hw_addr + REG_RXQ_RRD_PAUSE_THRESH);
}

/*
 * atl1_configure - Configure Transmit&Receive Unit after Reset
 * @adapter: board private structure
 *
 * Configure the Tx /Rx unit of the MAC after a reset.
 */
static u32 atl1_configure(struct atl1_adapter *adapter)
{
	struct atl1_hw *hw = &adapter->hw;
	u32 value;

	/* clear interrupt status */
	iowrite32(0xffffffff, adapter->hw.hw_addr + REG_ISR);

	/* set MAC Address */
	value = (((u32) hw->mac_addr[2]) << 24) |
		(((u32) hw->mac_addr[3]) << 16) |
		(((u32) hw->mac_addr[4]) << 8) |
		(((u32) hw->mac_addr[5]));
	iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR);
	value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1]));
	iowrite32(value, hw->hw_addr + (REG_MAC_STA_ADDR + 4));

	/* tx / rx ring */
J
Jay Cliburn 已提交
1478

J
Jay Cliburn 已提交
1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492
	/* HI base address */
	iowrite32((u32) ((adapter->tpd_ring.dma & 0xffffffff00000000ULL) >> 32),
		hw->hw_addr + REG_DESC_BASE_ADDR_HI);
	/* LO base address */
	iowrite32((u32) (adapter->rfd_ring.dma & 0x00000000ffffffffULL),
		hw->hw_addr + REG_DESC_RFD_ADDR_LO);
	iowrite32((u32) (adapter->rrd_ring.dma & 0x00000000ffffffffULL),
		hw->hw_addr + REG_DESC_RRD_ADDR_LO);
	iowrite32((u32) (adapter->tpd_ring.dma & 0x00000000ffffffffULL),
		hw->hw_addr + REG_DESC_TPD_ADDR_LO);
	iowrite32((u32) (adapter->cmb.dma & 0x00000000ffffffffULL),
		hw->hw_addr + REG_DESC_CMB_ADDR_LO);
	iowrite32((u32) (adapter->smb.dma & 0x00000000ffffffffULL),
		hw->hw_addr + REG_DESC_SMB_ADDR_LO);
J
Jay Cliburn 已提交
1493

J
Jay Cliburn 已提交
1494 1495 1496 1497 1498 1499 1500
	/* element count */
	value = adapter->rrd_ring.count;
	value <<= 16;
	value += adapter->rfd_ring.count;
	iowrite32(value, hw->hw_addr + REG_DESC_RFD_RRD_RING_SIZE);
	iowrite32(adapter->tpd_ring.count, hw->hw_addr +
		REG_DESC_TPD_RING_SIZE);
J
Jay Cliburn 已提交
1501

J
Jay Cliburn 已提交
1502 1503
	/* Load Ptr */
	iowrite32(1, hw->hw_addr + REG_LOAD_PTR);
J
Jay Cliburn 已提交
1504

J
Jay Cliburn 已提交
1505 1506 1507 1508 1509 1510 1511 1512
	/* config Mailbox */
	value = ((atomic_read(&adapter->tpd_ring.next_to_use)
		  & MB_TPD_PROD_INDX_MASK) << MB_TPD_PROD_INDX_SHIFT) |
		((atomic_read(&adapter->rrd_ring.next_to_clean)
		& MB_RRD_CONS_INDX_MASK) << MB_RRD_CONS_INDX_SHIFT) |
		((atomic_read(&adapter->rfd_ring.next_to_use)
		& MB_RFD_PROD_INDX_MASK) << MB_RFD_PROD_INDX_SHIFT);
	iowrite32(value, hw->hw_addr + REG_MAILBOX);
J
Jay Cliburn 已提交
1513

J
Jay Cliburn 已提交
1514 1515 1516 1517 1518 1519 1520 1521 1522 1523
	/* config IPG/IFG */
	value = (((u32) hw->ipgt & MAC_IPG_IFG_IPGT_MASK)
		 << MAC_IPG_IFG_IPGT_SHIFT) |
		(((u32) hw->min_ifg & MAC_IPG_IFG_MIFG_MASK)
		<< MAC_IPG_IFG_MIFG_SHIFT) |
		(((u32) hw->ipgr1 & MAC_IPG_IFG_IPGR1_MASK)
		<< MAC_IPG_IFG_IPGR1_SHIFT) |
		(((u32) hw->ipgr2 & MAC_IPG_IFG_IPGR2_MASK)
		<< MAC_IPG_IFG_IPGR2_SHIFT);
	iowrite32(value, hw->hw_addr + REG_MAC_IPG_IFG);
J
Jay Cliburn 已提交
1524

J
Jay Cliburn 已提交
1525 1526 1527 1528 1529 1530 1531 1532 1533
	/* config  Half-Duplex Control */
	value = ((u32) hw->lcol & MAC_HALF_DUPLX_CTRL_LCOL_MASK) |
		(((u32) hw->max_retry & MAC_HALF_DUPLX_CTRL_RETRY_MASK)
		<< MAC_HALF_DUPLX_CTRL_RETRY_SHIFT) |
		MAC_HALF_DUPLX_CTRL_EXC_DEF_EN |
		(0xa << MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT) |
		(((u32) hw->jam_ipg & MAC_HALF_DUPLX_CTRL_JAMIPG_MASK)
		<< MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT);
	iowrite32(value, hw->hw_addr + REG_MAC_HALF_DUPLX_CTRL);
J
Jay Cliburn 已提交
1534

J
Jay Cliburn 已提交
1535 1536 1537
	/* set Interrupt Moderator Timer */
	iowrite16(adapter->imt, hw->hw_addr + REG_IRQ_MODU_TIMER_INIT);
	iowrite32(MASTER_CTRL_ITIMER_EN, hw->hw_addr + REG_MASTER_CTRL);
J
Jay Cliburn 已提交
1538

J
Jay Cliburn 已提交
1539 1540
	/* set Interrupt Clear Timer */
	iowrite16(adapter->ict, hw->hw_addr + REG_CMBDISDMA_TIMER);
J
Jay Cliburn 已提交
1541

J
Jay Cliburn 已提交
1542 1543
	/* set max frame size hw will accept */
	iowrite32(hw->max_frame_size, hw->hw_addr + REG_MTU);
J
Jay Cliburn 已提交
1544

J
Jay Cliburn 已提交
1545 1546 1547 1548 1549 1550 1551 1552
	/* jumbo size & rrd retirement timer */
	value = (((u32) hw->rx_jumbo_th & RXQ_JMBOSZ_TH_MASK)
		 << RXQ_JMBOSZ_TH_SHIFT) |
		(((u32) hw->rx_jumbo_lkah & RXQ_JMBO_LKAH_MASK)
		<< RXQ_JMBO_LKAH_SHIFT) |
		(((u32) hw->rrd_ret_timer & RXQ_RRD_TIMER_MASK)
		<< RXQ_RRD_TIMER_SHIFT);
	iowrite32(value, hw->hw_addr + REG_RXQ_JMBOSZ_RRDTIM);
J
Jay Cliburn 已提交
1553

J
Jay Cliburn 已提交
1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564
	/* Flow Control */
	switch (hw->dev_rev) {
	case 0x8001:
	case 0x9001:
	case 0x9002:
	case 0x9003:
		set_flow_ctrl_old(adapter);
		break;
	default:
		set_flow_ctrl_new(hw);
		break;
J
Jay Cliburn 已提交
1565 1566
	}

J
Jay Cliburn 已提交
1567 1568 1569 1570 1571 1572 1573 1574 1575
	/* config TXQ */
	value = (((u32) hw->tpd_burst & TXQ_CTRL_TPD_BURST_NUM_MASK)
		 << TXQ_CTRL_TPD_BURST_NUM_SHIFT) |
		(((u32) hw->txf_burst & TXQ_CTRL_TXF_BURST_NUM_MASK)
		<< TXQ_CTRL_TXF_BURST_NUM_SHIFT) |
		(((u32) hw->tpd_fetch_th & TXQ_CTRL_TPD_FETCH_TH_MASK)
		<< TXQ_CTRL_TPD_FETCH_TH_SHIFT) | TXQ_CTRL_ENH_MODE |
		TXQ_CTRL_EN;
	iowrite32(value, hw->hw_addr + REG_TXQ_CTRL);
J
Jay Cliburn 已提交
1576

J
Jay Cliburn 已提交
1577 1578 1579 1580 1581 1582
	/* min tpd fetch gap & tx jumbo packet size threshold for taskoffload */
	value = (((u32) hw->tx_jumbo_task_th & TX_JUMBO_TASK_TH_MASK)
		<< TX_JUMBO_TASK_TH_SHIFT) |
		(((u32) hw->tpd_fetch_gap & TX_TPD_MIN_IPG_MASK)
		<< TX_TPD_MIN_IPG_SHIFT);
	iowrite32(value, hw->hw_addr + REG_TX_JUMBO_TASK_TH_TPD_IPG);
J
Jay Cliburn 已提交
1583

J
Jay Cliburn 已提交
1584 1585 1586 1587 1588 1589 1590 1591 1592
	/* config RXQ */
	value = (((u32) hw->rfd_burst & RXQ_CTRL_RFD_BURST_NUM_MASK)
		<< RXQ_CTRL_RFD_BURST_NUM_SHIFT) |
		(((u32) hw->rrd_burst & RXQ_CTRL_RRD_BURST_THRESH_MASK)
		<< RXQ_CTRL_RRD_BURST_THRESH_SHIFT) |
		(((u32) hw->rfd_fetch_gap & RXQ_CTRL_RFD_PREF_MIN_IPG_MASK)
		<< RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT) | RXQ_CTRL_CUT_THRU_EN |
		RXQ_CTRL_EN;
	iowrite32(value, hw->hw_addr + REG_RXQ_CTRL);
J
Jay Cliburn 已提交
1593

J
Jay Cliburn 已提交
1594 1595 1596
	/* config DMA Engine */
	value = ((((u32) hw->dmar_block) & DMA_CTRL_DMAR_BURST_LEN_MASK)
		<< DMA_CTRL_DMAR_BURST_LEN_SHIFT) |
J
Jay Cliburn 已提交
1597 1598
		((((u32) hw->dmaw_block) & DMA_CTRL_DMAW_BURST_LEN_MASK)
		<< DMA_CTRL_DMAW_BURST_LEN_SHIFT) | DMA_CTRL_DMAR_EN |
J
Jay Cliburn 已提交
1599 1600 1601 1602 1603
		DMA_CTRL_DMAW_EN;
	value |= (u32) hw->dma_ord;
	if (atl1_rcb_128 == hw->rcb_value)
		value |= DMA_CTRL_RCB_VALUE;
	iowrite32(value, hw->hw_addr + REG_DMA_CTRL);
J
Jay Cliburn 已提交
1604

J
Jay Cliburn 已提交
1605
	/* config CMB / SMB */
J
Jay Cliburn 已提交
1606 1607 1608 1609
	value = (hw->cmb_tpd > adapter->tpd_ring.count) ?
		hw->cmb_tpd : adapter->tpd_ring.count;
	value <<= 16;
	value |= hw->cmb_rrd;
J
Jay Cliburn 已提交
1610 1611 1612 1613
	iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TH);
	value = hw->cmb_rx_timer | ((u32) hw->cmb_tx_timer << 16);
	iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TIMER);
	iowrite32(hw->smb_timer, hw->hw_addr + REG_SMB_TIMER);
J
Jay Cliburn 已提交
1614

J
Jay Cliburn 已提交
1615 1616 1617
	/* --- enable CMB / SMB */
	value = CSMB_CTRL_CMB_EN | CSMB_CTRL_SMB_EN;
	iowrite32(value, hw->hw_addr + REG_CSMB_CTRL);
J
Jay Cliburn 已提交
1618

J
Jay Cliburn 已提交
1619 1620 1621 1622 1623
	value = ioread32(adapter->hw.hw_addr + REG_ISR);
	if (unlikely((value & ISR_PHY_LINKDOWN) != 0))
		value = 1;	/* config failed */
	else
		value = 0;
J
Jay Cliburn 已提交
1624

J
Jay Cliburn 已提交
1625 1626 1627 1628
	/* clear all interrupt status */
	iowrite32(0x3fffffff, adapter->hw.hw_addr + REG_ISR);
	iowrite32(0, adapter->hw.hw_addr + REG_ISR);
	return value;
J
Jay Cliburn 已提交
1629 1630
}

J
Jay Cliburn 已提交
1631 1632 1633 1634
/*
 * atl1_pcie_patch - Patch for PCIE module
 */
static void atl1_pcie_patch(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1635
{
J
Jay Cliburn 已提交
1636
	u32 value;
J
Jay Cliburn 已提交
1637

J
Jay Cliburn 已提交
1638 1639 1640 1641 1642 1643 1644
	/* much vendor magic here */
	value = 0x6500;
	iowrite32(value, adapter->hw.hw_addr + 0x12FC);
	/* pcie flow control mode change */
	value = ioread32(adapter->hw.hw_addr + 0x1008);
	value |= 0x8000;
	iowrite32(value, adapter->hw.hw_addr + 0x1008);
J
Jay Cliburn 已提交
1645 1646 1647
}

/*
J
Jay Cliburn 已提交
1648 1649 1650 1651
 * When ACPI resume on some VIA MotherBoard, the Interrupt Disable bit/0x400
 * on PCI Command register is disable.
 * The function enable this bit.
 * Brackett, 2006/03/15
J
Jay Cliburn 已提交
1652
 */
J
Jay Cliburn 已提交
1653
static void atl1_via_workaround(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1654
{
J
Jay Cliburn 已提交
1655
	unsigned long value;
J
Jay Cliburn 已提交
1656

J
Jay Cliburn 已提交
1657 1658 1659 1660
	value = ioread16(adapter->hw.hw_addr + PCI_COMMAND);
	if (value & PCI_COMMAND_INTX_DISABLE)
		value &= ~PCI_COMMAND_INTX_DISABLE;
	iowrite32(value, adapter->hw.hw_addr + PCI_COMMAND);
J
Jay Cliburn 已提交
1661 1662
}

J
Jay Cliburn 已提交
1663 1664
static void atl1_inc_smb(struct atl1_adapter *adapter)
{
1665
	struct net_device *netdev = adapter->netdev;
J
Jay Cliburn 已提交
1666
	struct stats_msg_block *smb = adapter->smb.smb;
J
Jay Cliburn 已提交
1667

J
Jay Cliburn 已提交
1668 1669 1670 1671 1672 1673 1674 1675
	/* Fill out the OS statistics structure */
	adapter->soft_stats.rx_packets += smb->rx_ok;
	adapter->soft_stats.tx_packets += smb->tx_ok;
	adapter->soft_stats.rx_bytes += smb->rx_byte_cnt;
	adapter->soft_stats.tx_bytes += smb->tx_byte_cnt;
	adapter->soft_stats.multicast += smb->rx_mcast;
	adapter->soft_stats.collisions += (smb->tx_1_col + smb->tx_2_col * 2 +
		smb->tx_late_col + smb->tx_abort_col * adapter->hw.max_retry);
J
Jay Cliburn 已提交
1676

J
Jay Cliburn 已提交
1677 1678 1679 1680 1681 1682 1683 1684 1685 1686
	/* Rx Errors */
	adapter->soft_stats.rx_errors += (smb->rx_frag + smb->rx_fcs_err +
		smb->rx_len_err + smb->rx_sz_ov + smb->rx_rxf_ov +
		smb->rx_rrd_ov + smb->rx_align_err);
	adapter->soft_stats.rx_fifo_errors += smb->rx_rxf_ov;
	adapter->soft_stats.rx_length_errors += smb->rx_len_err;
	adapter->soft_stats.rx_crc_errors += smb->rx_fcs_err;
	adapter->soft_stats.rx_frame_errors += smb->rx_align_err;
	adapter->soft_stats.rx_missed_errors += (smb->rx_rrd_ov +
		smb->rx_rxf_ov);
J
Jay Cliburn 已提交
1687

J
Jay Cliburn 已提交
1688 1689 1690
	adapter->soft_stats.rx_pause += smb->rx_pause;
	adapter->soft_stats.rx_rrd_ov += smb->rx_rrd_ov;
	adapter->soft_stats.rx_trunc += smb->rx_sz_ov;
J
Jay Cliburn 已提交
1691

J
Jay Cliburn 已提交
1692 1693 1694 1695 1696 1697
	/* Tx Errors */
	adapter->soft_stats.tx_errors += (smb->tx_late_col +
		smb->tx_abort_col + smb->tx_underrun + smb->tx_trunc);
	adapter->soft_stats.tx_fifo_errors += smb->tx_underrun;
	adapter->soft_stats.tx_aborted_errors += smb->tx_abort_col;
	adapter->soft_stats.tx_window_errors += smb->tx_late_col;
J
Jay Cliburn 已提交
1698

J
Jay Cliburn 已提交
1699 1700 1701 1702 1703 1704 1705 1706
	adapter->soft_stats.excecol += smb->tx_abort_col;
	adapter->soft_stats.deffer += smb->tx_defer;
	adapter->soft_stats.scc += smb->tx_1_col;
	adapter->soft_stats.mcc += smb->tx_2_col;
	adapter->soft_stats.latecol += smb->tx_late_col;
	adapter->soft_stats.tx_underun += smb->tx_underrun;
	adapter->soft_stats.tx_trunc += smb->tx_trunc;
	adapter->soft_stats.tx_pause += smb->tx_pause;
J
Jay Cliburn 已提交
1707

1708 1709 1710 1711 1712 1713 1714 1715
	netdev->stats.rx_packets = adapter->soft_stats.rx_packets;
	netdev->stats.tx_packets = adapter->soft_stats.tx_packets;
	netdev->stats.rx_bytes = adapter->soft_stats.rx_bytes;
	netdev->stats.tx_bytes = adapter->soft_stats.tx_bytes;
	netdev->stats.multicast = adapter->soft_stats.multicast;
	netdev->stats.collisions = adapter->soft_stats.collisions;
	netdev->stats.rx_errors = adapter->soft_stats.rx_errors;
	netdev->stats.rx_over_errors =
J
Jay Cliburn 已提交
1716
		adapter->soft_stats.rx_missed_errors;
1717
	netdev->stats.rx_length_errors =
J
Jay Cliburn 已提交
1718
		adapter->soft_stats.rx_length_errors;
1719 1720
	netdev->stats.rx_crc_errors = adapter->soft_stats.rx_crc_errors;
	netdev->stats.rx_frame_errors =
J
Jay Cliburn 已提交
1721
		adapter->soft_stats.rx_frame_errors;
1722 1723
	netdev->stats.rx_fifo_errors = adapter->soft_stats.rx_fifo_errors;
	netdev->stats.rx_missed_errors =
J
Jay Cliburn 已提交
1724
		adapter->soft_stats.rx_missed_errors;
1725 1726 1727
	netdev->stats.tx_errors = adapter->soft_stats.tx_errors;
	netdev->stats.tx_fifo_errors = adapter->soft_stats.tx_fifo_errors;
	netdev->stats.tx_aborted_errors =
J
Jay Cliburn 已提交
1728
		adapter->soft_stats.tx_aborted_errors;
1729
	netdev->stats.tx_window_errors =
J
Jay Cliburn 已提交
1730
		adapter->soft_stats.tx_window_errors;
1731
	netdev->stats.tx_carrier_errors =
J
Jay Cliburn 已提交
1732
		adapter->soft_stats.tx_carrier_errors;
J
Jay Cliburn 已提交
1733 1734
}

J
Jay Cliburn 已提交
1735
static void atl1_update_mailbox(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1736
{
J
Jay Cliburn 已提交
1737 1738 1739 1740
	unsigned long flags;
	u32 tpd_next_to_use;
	u32 rfd_next_to_use;
	u32 rrd_next_to_clean;
J
Jay Cliburn 已提交
1741 1742
	u32 value;

J
Jay Cliburn 已提交
1743
	spin_lock_irqsave(&adapter->mb_lock, flags);
J
Jay Cliburn 已提交
1744

J
Jay Cliburn 已提交
1745 1746 1747
	tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use);
	rfd_next_to_use = atomic_read(&adapter->rfd_ring.next_to_use);
	rrd_next_to_clean = atomic_read(&adapter->rrd_ring.next_to_clean);
J
Jay Cliburn 已提交
1748

J
Jay Cliburn 已提交
1749 1750 1751 1752 1753 1754 1755
	value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) <<
		MB_RFD_PROD_INDX_SHIFT) |
		((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) <<
		MB_RRD_CONS_INDX_SHIFT) |
		((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) <<
		MB_TPD_PROD_INDX_SHIFT);
	iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX);
J
Jay Cliburn 已提交
1756

J
Jay Cliburn 已提交
1757
	spin_unlock_irqrestore(&adapter->mb_lock, flags);
J
Jay Cliburn 已提交
1758 1759
}

J
Jay Cliburn 已提交
1760 1761
static void atl1_clean_alloc_flag(struct atl1_adapter *adapter,
	struct rx_return_desc *rrd, u16 offset)
J
Jay Cliburn 已提交
1762
{
J
Jay Cliburn 已提交
1763
	struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
J
Jay Cliburn 已提交
1764

J
Jay Cliburn 已提交
1765 1766 1767 1768
	while (rfd_ring->next_to_clean != (rrd->buf_indx + offset)) {
		rfd_ring->buffer_info[rfd_ring->next_to_clean].alloced = 0;
		if (++rfd_ring->next_to_clean == rfd_ring->count) {
			rfd_ring->next_to_clean = 0;
J
Jay Cliburn 已提交
1769 1770
		}
	}
J
Jay Cliburn 已提交
1771
}
J
Jay Cliburn 已提交
1772

J
Jay Cliburn 已提交
1773 1774 1775 1776
static void atl1_update_rfd_index(struct atl1_adapter *adapter,
	struct rx_return_desc *rrd)
{
	u16 num_buf;
J
Jay Cliburn 已提交
1777

J
Jay Cliburn 已提交
1778 1779 1780 1781 1782 1783
	num_buf = (rrd->xsz.xsum_sz.pkt_size + adapter->rx_buffer_len - 1) /
		adapter->rx_buffer_len;
	if (rrd->num_buf == num_buf)
		/* clean alloc flag for bad rrd */
		atl1_clean_alloc_flag(adapter, rrd, num_buf);
}
J
Jay Cliburn 已提交
1784

J
Jay Cliburn 已提交
1785 1786 1787 1788
static void atl1_rx_checksum(struct atl1_adapter *adapter,
	struct rx_return_desc *rrd, struct sk_buff *skb)
{
	struct pci_dev *pdev = adapter->pdev;
J
Jay Cliburn 已提交
1789

1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800
	/*
	 * The L1 hardware contains a bug that erroneously sets the
	 * PACKET_FLAG_ERR and ERR_FLAG_L4_CHKSUM bits whenever a
	 * fragmented IP packet is received, even though the packet
	 * is perfectly valid and its checksum is correct. There's
	 * no way to distinguish between one of these good packets
	 * and a packet that actually contains a TCP/UDP checksum
	 * error, so all we can do is allow it to be handed up to
	 * the higher layers and let it be sorted out there.
	 */

J
Jay Cliburn 已提交
1801
	skb->ip_summed = CHECKSUM_NONE;
J
Jay Cliburn 已提交
1802

J
Jay Cliburn 已提交
1803 1804 1805 1806
	if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) {
		if (rrd->err_flg & (ERR_FLAG_CRC | ERR_FLAG_TRUNC |
					ERR_FLAG_CODE | ERR_FLAG_OV)) {
			adapter->hw_csum_err++;
J
Jay Cliburn 已提交
1807 1808 1809
			if (netif_msg_rx_err(adapter))
				dev_printk(KERN_DEBUG, &pdev->dev,
					"rx checksum error\n");
J
Jay Cliburn 已提交
1810
			return;
J
Jay Cliburn 已提交
1811 1812 1813
		}
	}

J
Jay Cliburn 已提交
1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824
	/* not IPv4 */
	if (!(rrd->pkt_flg & PACKET_FLAG_IPV4))
		/* checksum is invalid, but it's not an IPv4 pkt, so ok */
		return;

	/* IPv4 packet */
	if (likely(!(rrd->err_flg &
		(ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM)))) {
		skb->ip_summed = CHECKSUM_UNNECESSARY;
		adapter->hw_csum_good++;
		return;
J
Jay Cliburn 已提交
1825 1826
	}

J
Jay Cliburn 已提交
1827
	return;
J
Jay Cliburn 已提交
1828 1829
}

J
Jay Cliburn 已提交
1830 1831 1832 1833 1834
/*
 * atl1_alloc_rx_buffers - Replace used receive buffers
 * @adapter: address of board private structure
 */
static u16 atl1_alloc_rx_buffers(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1835
{
J
Jay Cliburn 已提交
1836 1837 1838 1839 1840 1841 1842 1843 1844
	struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
	struct pci_dev *pdev = adapter->pdev;
	struct page *page;
	unsigned long offset;
	struct atl1_buffer *buffer_info, *next_info;
	struct sk_buff *skb;
	u16 num_alloc = 0;
	u16 rfd_next_to_use, next_next;
	struct rx_free_desc *rfd_desc;
J
Jay Cliburn 已提交
1845

J
Jay Cliburn 已提交
1846 1847 1848 1849 1850
	next_next = rfd_next_to_use = atomic_read(&rfd_ring->next_to_use);
	if (++next_next == rfd_ring->count)
		next_next = 0;
	buffer_info = &rfd_ring->buffer_info[rfd_next_to_use];
	next_info = &rfd_ring->buffer_info[next_next];
J
Jay Cliburn 已提交
1851

J
Jay Cliburn 已提交
1852 1853 1854 1855 1856
	while (!buffer_info->alloced && !next_info->alloced) {
		if (buffer_info->skb) {
			buffer_info->alloced = 1;
			goto next;
		}
J
Jay Cliburn 已提交
1857

J
Jay Cliburn 已提交
1858
		rfd_desc = ATL1_RFD_DESC(rfd_ring, rfd_next_to_use);
J
Jay Cliburn 已提交
1859

S
Stephen Hemminger 已提交
1860 1861
		skb = netdev_alloc_skb(adapter->netdev,
				       adapter->rx_buffer_len + NET_IP_ALIGN);
J
Jay Cliburn 已提交
1862 1863
		if (unlikely(!skb)) {
			/* Better luck next round */
1864
			adapter->netdev->stats.rx_dropped++;
J
Jay Cliburn 已提交
1865 1866
			break;
		}
J
Jay Cliburn 已提交
1867

J
Jay Cliburn 已提交
1868 1869 1870 1871 1872 1873
		/*
		 * Make buffer alignment 2 beyond a 16 byte boundary
		 * this will result in a 16 byte aligned IP header after
		 * the 14 byte MAC header is removed
		 */
		skb_reserve(skb, NET_IP_ALIGN);
J
Jay Cliburn 已提交
1874

J
Jay Cliburn 已提交
1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885
		buffer_info->alloced = 1;
		buffer_info->skb = skb;
		buffer_info->length = (u16) adapter->rx_buffer_len;
		page = virt_to_page(skb->data);
		offset = (unsigned long)skb->data & ~PAGE_MASK;
		buffer_info->dma = pci_map_page(pdev, page, offset,
						adapter->rx_buffer_len,
						PCI_DMA_FROMDEVICE);
		rfd_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
		rfd_desc->buf_len = cpu_to_le16(adapter->rx_buffer_len);
		rfd_desc->coalese = 0;
J
Jay Cliburn 已提交
1886

J
Jay Cliburn 已提交
1887 1888 1889 1890
next:
		rfd_next_to_use = next_next;
		if (unlikely(++next_next == rfd_ring->count))
			next_next = 0;
J
Jay Cliburn 已提交
1891

J
Jay Cliburn 已提交
1892 1893 1894 1895
		buffer_info = &rfd_ring->buffer_info[rfd_next_to_use];
		next_info = &rfd_ring->buffer_info[next_next];
		num_alloc++;
	}
J
Jay Cliburn 已提交
1896

J
Jay Cliburn 已提交
1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907
	if (num_alloc) {
		/*
		 * Force memory writes to complete before letting h/w
		 * know there are new descriptors to fetch.  (Only
		 * applicable for weak-ordered memory model archs,
		 * such as IA-64).
		 */
		wmb();
		atomic_set(&rfd_ring->next_to_use, (int)rfd_next_to_use);
	}
	return num_alloc;
J
Jay Cliburn 已提交
1908 1909
}

J
Jay Cliburn 已提交
1910
static void atl1_intr_rx(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1911
{
J
Jay Cliburn 已提交
1912 1913 1914
	int i, count;
	u16 length;
	u16 rrd_next_to_clean;
J
Jay Cliburn 已提交
1915
	u32 value;
J
Jay Cliburn 已提交
1916 1917 1918 1919 1920
	struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
	struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
	struct atl1_buffer *buffer_info;
	struct rx_return_desc *rrd;
	struct sk_buff *skb;
J
Jay Cliburn 已提交
1921

J
Jay Cliburn 已提交
1922
	count = 0;
J
Jay Cliburn 已提交
1923

J
Jay Cliburn 已提交
1924
	rrd_next_to_clean = atomic_read(&rrd_ring->next_to_clean);
J
Jay Cliburn 已提交
1925

J
Jay Cliburn 已提交
1926 1927 1928 1929 1930 1931 1932 1933
	while (1) {
		rrd = ATL1_RRD_DESC(rrd_ring, rrd_next_to_clean);
		i = 1;
		if (likely(rrd->xsz.valid)) {	/* packet valid */
chk_rrd:
			/* check rrd status */
			if (likely(rrd->num_buf == 1))
				goto rrd_ok;
J
Jay Cliburn 已提交
1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955
			else if (netif_msg_rx_err(adapter)) {
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"unexpected RRD buffer count\n");
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"rx_buf_len = %d\n",
					adapter->rx_buffer_len);
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"RRD num_buf = %d\n",
					rrd->num_buf);
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"RRD pkt_len = %d\n",
					rrd->xsz.xsum_sz.pkt_size);
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"RRD pkt_flg = 0x%08X\n",
					rrd->pkt_flg);
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"RRD err_flg = 0x%08X\n",
					rrd->err_flg);
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"RRD vlan_tag = 0x%08X\n",
					rrd->vlan_tag);
			}
J
Jay Cliburn 已提交
1956

J
Jay Cliburn 已提交
1957 1958 1959 1960 1961 1962 1963
			/* rrd seems to be bad */
			if (unlikely(i-- > 0)) {
				/* rrd may not be DMAed completely */
				udelay(1);
				goto chk_rrd;
			}
			/* bad rrd */
J
Jay Cliburn 已提交
1964 1965 1966
			if (netif_msg_rx_err(adapter))
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"bad RRD\n");
J
Jay Cliburn 已提交
1967 1968 1969
			/* see if update RFD index */
			if (rrd->num_buf > 1)
				atl1_update_rfd_index(adapter, rrd);
J
Jay Cliburn 已提交
1970

J
Jay Cliburn 已提交
1971 1972 1973 1974 1975 1976 1977
			/* update rrd */
			rrd->xsz.valid = 0;
			if (++rrd_next_to_clean == rrd_ring->count)
				rrd_next_to_clean = 0;
			count++;
			continue;
		} else {	/* current rrd still not be updated */
J
Jay Cliburn 已提交
1978

J
Jay Cliburn 已提交
1979 1980 1981 1982 1983
			break;
		}
rrd_ok:
		/* clean alloc flag for bad rrd */
		atl1_clean_alloc_flag(adapter, rrd, 0);
J
Jay Cliburn 已提交
1984

J
Jay Cliburn 已提交
1985 1986 1987
		buffer_info = &rfd_ring->buffer_info[rrd->buf_indx];
		if (++rfd_ring->next_to_clean == rfd_ring->count)
			rfd_ring->next_to_clean = 0;
J
Jay Cliburn 已提交
1988

J
Jay Cliburn 已提交
1989 1990 1991 1992
		/* update rrd next to clean */
		if (++rrd_next_to_clean == rrd_ring->count)
			rrd_next_to_clean = 0;
		count++;
J
Jay Cliburn 已提交
1993

J
Jay Cliburn 已提交
1994 1995 1996 1997 1998 1999 2000 2001 2002 2003
		if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) {
			if (!(rrd->err_flg &
				(ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM
				| ERR_FLAG_LEN))) {
				/* packet error, don't need upstream */
				buffer_info->alloced = 0;
				rrd->xsz.valid = 0;
				continue;
			}
		}
J
Jay Cliburn 已提交
2004

J
Jay Cliburn 已提交
2005 2006 2007
		/* Good Receive */
		pci_unmap_page(adapter->pdev, buffer_info->dma,
			       buffer_info->length, PCI_DMA_FROMDEVICE);
2008
		buffer_info->dma = 0;
J
Jay Cliburn 已提交
2009 2010
		skb = buffer_info->skb;
		length = le16_to_cpu(rrd->xsz.xsum_sz.pkt_size);
J
Jay Cliburn 已提交
2011

2012
		skb_put(skb, length - ETH_FCS_LEN);
J
Jay Cliburn 已提交
2013

J
Jay Cliburn 已提交
2014 2015 2016
		/* Receive Checksum Offload */
		atl1_rx_checksum(adapter, rrd, skb);
		skb->protocol = eth_type_trans(skb, adapter->netdev);
J
Jay Cliburn 已提交
2017

J
Jay Cliburn 已提交
2018 2019 2020 2021 2022 2023 2024
		if (adapter->vlgrp && (rrd->pkt_flg & PACKET_FLAG_VLAN_INS)) {
			u16 vlan_tag = (rrd->vlan_tag >> 4) |
					((rrd->vlan_tag & 7) << 13) |
					((rrd->vlan_tag & 8) << 9);
			vlan_hwaccel_rx(skb, adapter->vlgrp, vlan_tag);
		} else
			netif_rx(skb);
J
Jay Cliburn 已提交
2025

J
Jay Cliburn 已提交
2026 2027 2028 2029
		/* let protocol layer free skb */
		buffer_info->skb = NULL;
		buffer_info->alloced = 0;
		rrd->xsz.valid = 0;
J
Jay Cliburn 已提交
2030

J
Jay Cliburn 已提交
2031 2032
		adapter->netdev->last_rx = jiffies;
	}
J
Jay Cliburn 已提交
2033

J
Jay Cliburn 已提交
2034
	atomic_set(&rrd_ring->next_to_clean, rrd_next_to_clean);
J
Jay Cliburn 已提交
2035

J
Jay Cliburn 已提交
2036
	atl1_alloc_rx_buffers(adapter);
J
Jay Cliburn 已提交
2037

J
Jay Cliburn 已提交
2038 2039 2040 2041
	/* update mailbox ? */
	if (count) {
		u32 tpd_next_to_use;
		u32 rfd_next_to_use;
J
Jay Cliburn 已提交
2042

J
Jay Cliburn 已提交
2043
		spin_lock(&adapter->mb_lock);
J
Jay Cliburn 已提交
2044

J
Jay Cliburn 已提交
2045 2046 2047 2048 2049 2050 2051 2052 2053 2054 2055 2056 2057 2058
		tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use);
		rfd_next_to_use =
		    atomic_read(&adapter->rfd_ring.next_to_use);
		rrd_next_to_clean =
		    atomic_read(&adapter->rrd_ring.next_to_clean);
		value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) <<
			MB_RFD_PROD_INDX_SHIFT) |
                        ((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) <<
			MB_RRD_CONS_INDX_SHIFT) |
                        ((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) <<
			MB_TPD_PROD_INDX_SHIFT);
		iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX);
		spin_unlock(&adapter->mb_lock);
	}
J
Jay Cliburn 已提交
2059 2060
}

J
Jay Cliburn 已提交
2061
static void atl1_intr_tx(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
2062
{
J
Jay Cliburn 已提交
2063 2064 2065 2066
	struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
	struct atl1_buffer *buffer_info;
	u16 sw_tpd_next_to_clean;
	u16 cmb_tpd_next_to_clean;
J
Jay Cliburn 已提交
2067

J
Jay Cliburn 已提交
2068 2069
	sw_tpd_next_to_clean = atomic_read(&tpd_ring->next_to_clean);
	cmb_tpd_next_to_clean = le16_to_cpu(adapter->cmb.cmb->tpd_cons_idx);
J
Jay Cliburn 已提交
2070

J
Jay Cliburn 已提交
2071 2072
	while (cmb_tpd_next_to_clean != sw_tpd_next_to_clean) {
		struct tx_packet_desc *tpd;
J
Jay Cliburn 已提交
2073

J
Jay Cliburn 已提交
2074 2075 2076 2077 2078 2079 2080
		tpd = ATL1_TPD_DESC(tpd_ring, sw_tpd_next_to_clean);
		buffer_info = &tpd_ring->buffer_info[sw_tpd_next_to_clean];
		if (buffer_info->dma) {
			pci_unmap_page(adapter->pdev, buffer_info->dma,
				       buffer_info->length, PCI_DMA_TODEVICE);
			buffer_info->dma = 0;
		}
J
Jay Cliburn 已提交
2081

J
Jay Cliburn 已提交
2082 2083 2084 2085
		if (buffer_info->skb) {
			dev_kfree_skb_irq(buffer_info->skb);
			buffer_info->skb = NULL;
		}
J
Jay Cliburn 已提交
2086

J
Jay Cliburn 已提交
2087 2088 2089 2090 2091 2092 2093 2094
		if (++sw_tpd_next_to_clean == tpd_ring->count)
			sw_tpd_next_to_clean = 0;
	}
	atomic_set(&tpd_ring->next_to_clean, sw_tpd_next_to_clean);

	if (netif_queue_stopped(adapter->netdev)
	    && netif_carrier_ok(adapter->netdev))
		netif_wake_queue(adapter->netdev);
J
Jay Cliburn 已提交
2095 2096
}

2097
static u16 atl1_tpd_avail(struct atl1_tpd_ring *tpd_ring)
J
Jay Cliburn 已提交
2098 2099 2100
{
	u16 next_to_clean = atomic_read(&tpd_ring->next_to_clean);
	u16 next_to_use = atomic_read(&tpd_ring->next_to_use);
J
Jay Cliburn 已提交
2101 2102 2103
	return ((next_to_clean > next_to_use) ?
		next_to_clean - next_to_use - 1 :
		tpd_ring->count + next_to_clean - next_to_use - 1);
J
Jay Cliburn 已提交
2104 2105 2106
}

static int atl1_tso(struct atl1_adapter *adapter, struct sk_buff *skb,
J
Jay Cliburn 已提交
2107
	struct tx_packet_desc *ptpd)
J
Jay Cliburn 已提交
2108
{
J
Jay Cliburn 已提交
2109 2110
	u8 hdr_len, ip_off;
	u32 real_len;
J
Jay Cliburn 已提交
2111 2112 2113 2114 2115 2116
	int err;

	if (skb_shinfo(skb)->gso_size) {
		if (skb_header_cloned(skb)) {
			err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
			if (unlikely(err))
J
Jay Cliburn 已提交
2117
				return -1;
J
Jay Cliburn 已提交
2118 2119
		}

A
Al Viro 已提交
2120
		if (skb->protocol == htons(ETH_P_IP)) {
2121 2122
			struct iphdr *iph = ip_hdr(skb);

J
Jay Cliburn 已提交
2123 2124 2125 2126 2127 2128 2129 2130 2131 2132 2133 2134 2135 2136 2137 2138 2139 2140 2141 2142 2143
			real_len = (((unsigned char *)iph - skb->data) +
				ntohs(iph->tot_len));
			if (real_len < skb->len)
				pskb_trim(skb, real_len);
			hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb));
			if (skb->len == hdr_len) {
				iph->check = 0;
				tcp_hdr(skb)->check =
					~csum_tcpudp_magic(iph->saddr,
					iph->daddr, tcp_hdrlen(skb),
					IPPROTO_TCP, 0);
				ptpd->word3 |= (iph->ihl & TPD_IPHL_MASK) <<
					TPD_IPHL_SHIFT;
				ptpd->word3 |= ((tcp_hdrlen(skb) >> 2) &
					TPD_TCPHDRLEN_MASK) <<
					TPD_TCPHDRLEN_SHIFT;
				ptpd->word3 |= 1 << TPD_IP_CSUM_SHIFT;
				ptpd->word3 |= 1 << TPD_TCP_CSUM_SHIFT;
				return 1;
			}

2144
			iph->check = 0;
2145
			tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
J
Jay Cliburn 已提交
2146 2147 2148 2149 2150 2151 2152 2153 2154 2155 2156 2157 2158 2159 2160 2161
					iph->daddr, 0, IPPROTO_TCP, 0);
			ip_off = (unsigned char *)iph -
				(unsigned char *) skb_network_header(skb);
			if (ip_off == 8) /* 802.3-SNAP frame */
				ptpd->word3 |= 1 << TPD_ETHTYPE_SHIFT;
			else if (ip_off != 0)
				return -2;

			ptpd->word3 |= (iph->ihl & TPD_IPHL_MASK) <<
				TPD_IPHL_SHIFT;
			ptpd->word3 |= ((tcp_hdrlen(skb) >> 2) &
				TPD_TCPHDRLEN_MASK) << TPD_TCPHDRLEN_SHIFT;
			ptpd->word3 |= (skb_shinfo(skb)->gso_size &
				TPD_MSS_MASK) << TPD_MSS_SHIFT;
			ptpd->word3 |= 1 << TPD_SEGMENT_EN_SHIFT;
			return 3;
J
Jay Cliburn 已提交
2162 2163 2164 2165 2166 2167
		}
	}
	return false;
}

static int atl1_tx_csum(struct atl1_adapter *adapter, struct sk_buff *skb,
J
Jay Cliburn 已提交
2168
	struct tx_packet_desc *ptpd)
J
Jay Cliburn 已提交
2169 2170 2171 2172
{
	u8 css, cso;

	if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
J
Jay Cliburn 已提交
2173 2174 2175 2176 2177 2178 2179
		css = (u8) (skb->csum_start - skb_headroom(skb));
		cso = css + (u8) skb->csum_offset;
		if (unlikely(css & 0x1)) {
			/* L1 hardware requires an even number here */
			if (netif_msg_tx_err(adapter))
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"payload offset not an even number\n");
J
Jay Cliburn 已提交
2180 2181
			return -1;
		}
J
Jay Cliburn 已提交
2182 2183 2184 2185 2186
		ptpd->word3 |= (css & TPD_PLOADOFFSET_MASK) <<
			TPD_PLOADOFFSET_SHIFT;
		ptpd->word3 |= (cso & TPD_CCSUMOFFSET_MASK) <<
			TPD_CCSUMOFFSET_SHIFT;
		ptpd->word3 |= 1 << TPD_CUST_CSUM_EN_SHIFT;
J
Jay Cliburn 已提交
2187 2188
		return true;
	}
J
Jay Cliburn 已提交
2189
	return 0;
J
Jay Cliburn 已提交
2190 2191
}

J
Jay Cliburn 已提交
2192
static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb,
J
Jay Cliburn 已提交
2193
	struct tx_packet_desc *ptpd)
J
Jay Cliburn 已提交
2194 2195 2196
{
	struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
	struct atl1_buffer *buffer_info;
J
Jay Cliburn 已提交
2197
	u16 buf_len = skb->len;
J
Jay Cliburn 已提交
2198 2199 2200 2201
	struct page *page;
	unsigned long offset;
	unsigned int nr_frags;
	unsigned int f;
J
Jay Cliburn 已提交
2202 2203 2204 2205
	int retval;
	u16 next_to_use;
	u16 data_len;
	u8 hdr_len;
J
Jay Cliburn 已提交
2206

J
Jay Cliburn 已提交
2207
	buf_len -= skb->data_len;
J
Jay Cliburn 已提交
2208
	nr_frags = skb_shinfo(skb)->nr_frags;
J
Jay Cliburn 已提交
2209 2210
	next_to_use = atomic_read(&tpd_ring->next_to_use);
	buffer_info = &tpd_ring->buffer_info[next_to_use];
J
Jay Cliburn 已提交
2211 2212
	if (unlikely(buffer_info->skb))
		BUG();
J
Jay Cliburn 已提交
2213 2214
	/* put skb in last TPD */
	buffer_info->skb = NULL;
J
Jay Cliburn 已提交
2215

J
Jay Cliburn 已提交
2216 2217 2218 2219 2220
	retval = (ptpd->word3 >> TPD_SEGMENT_EN_SHIFT) & TPD_SEGMENT_EN_MASK;
	if (retval) {
		/* TSO */
		hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
		buffer_info->length = hdr_len;
J
Jay Cliburn 已提交
2221 2222 2223
		page = virt_to_page(skb->data);
		offset = (unsigned long)skb->data & ~PAGE_MASK;
		buffer_info->dma = pci_map_page(adapter->pdev, page,
J
Jay Cliburn 已提交
2224
						offset, hdr_len,
J
Jay Cliburn 已提交
2225 2226
						PCI_DMA_TODEVICE);

J
Jay Cliburn 已提交
2227 2228
		if (++next_to_use == tpd_ring->count)
			next_to_use = 0;
J
Jay Cliburn 已提交
2229

J
Jay Cliburn 已提交
2230 2231
		if (buf_len > hdr_len) {
			int i, nseg;
2232

J
Jay Cliburn 已提交
2233 2234
			data_len = buf_len - hdr_len;
			nseg = (data_len + ATL1_MAX_TX_BUF_LEN - 1) /
J
Jay Cliburn 已提交
2235
				ATL1_MAX_TX_BUF_LEN;
J
Jay Cliburn 已提交
2236
			for (i = 0; i < nseg; i++) {
J
Jay Cliburn 已提交
2237
				buffer_info =
J
Jay Cliburn 已提交
2238
				    &tpd_ring->buffer_info[next_to_use];
J
Jay Cliburn 已提交
2239 2240
				buffer_info->skb = NULL;
				buffer_info->length =
J
Jay Cliburn 已提交
2241
				    (ATL1_MAX_TX_BUF_LEN >=
J
Jay Cliburn 已提交
2242 2243
				     data_len) ? ATL1_MAX_TX_BUF_LEN : data_len;
				data_len -= buffer_info->length;
J
Jay Cliburn 已提交
2244
				page = virt_to_page(skb->data +
J
Jay Cliburn 已提交
2245
					(hdr_len + i * ATL1_MAX_TX_BUF_LEN));
J
Jay Cliburn 已提交
2246
				offset = (unsigned long)(skb->data +
J
Jay Cliburn 已提交
2247 2248
					(hdr_len + i * ATL1_MAX_TX_BUF_LEN)) &
					~PAGE_MASK;
J
Jay Cliburn 已提交
2249 2250 2251
				buffer_info->dma = pci_map_page(adapter->pdev,
					page, offset, buffer_info->length,
					PCI_DMA_TODEVICE);
J
Jay Cliburn 已提交
2252 2253
				if (++next_to_use == tpd_ring->count)
					next_to_use = 0;
J
Jay Cliburn 已提交
2254 2255 2256
			}
		}
	} else {
J
Jay Cliburn 已提交
2257 2258
		/* not TSO */
		buffer_info->length = buf_len;
J
Jay Cliburn 已提交
2259 2260 2261
		page = virt_to_page(skb->data);
		offset = (unsigned long)skb->data & ~PAGE_MASK;
		buffer_info->dma = pci_map_page(adapter->pdev, page,
J
Jay Cliburn 已提交
2262 2263 2264
			offset, buf_len, PCI_DMA_TODEVICE);
		if (++next_to_use == tpd_ring->count)
			next_to_use = 0;
J
Jay Cliburn 已提交
2265 2266 2267 2268
	}

	for (f = 0; f < nr_frags; f++) {
		struct skb_frag_struct *frag;
J
Jay Cliburn 已提交
2269
		u16 i, nseg;
J
Jay Cliburn 已提交
2270 2271

		frag = &skb_shinfo(skb)->frags[f];
J
Jay Cliburn 已提交
2272
		buf_len = frag->size;
J
Jay Cliburn 已提交
2273

J
Jay Cliburn 已提交
2274 2275 2276 2277
		nseg = (buf_len + ATL1_MAX_TX_BUF_LEN - 1) /
			ATL1_MAX_TX_BUF_LEN;
		for (i = 0; i < nseg; i++) {
			buffer_info = &tpd_ring->buffer_info[next_to_use];
J
Jay Cliburn 已提交
2278 2279 2280
			if (unlikely(buffer_info->skb))
				BUG();
			buffer_info->skb = NULL;
J
Jay Cliburn 已提交
2281 2282 2283
			buffer_info->length = (buf_len > ATL1_MAX_TX_BUF_LEN) ?
				ATL1_MAX_TX_BUF_LEN : buf_len;
			buf_len -= buffer_info->length;
J
Jay Cliburn 已提交
2284 2285 2286 2287
			buffer_info->dma = pci_map_page(adapter->pdev,
				frag->page,
				frag->page_offset + (i * ATL1_MAX_TX_BUF_LEN),
				buffer_info->length, PCI_DMA_TODEVICE);
J
Jay Cliburn 已提交
2288

J
Jay Cliburn 已提交
2289 2290
			if (++next_to_use == tpd_ring->count)
				next_to_use = 0;
J
Jay Cliburn 已提交
2291 2292 2293 2294 2295 2296 2297
		}
	}

	/* last tpd's buffer-info */
	buffer_info->skb = skb;
}

J
Jay Cliburn 已提交
2298 2299
static void atl1_tx_queue(struct atl1_adapter *adapter, u16 count,
       struct tx_packet_desc *ptpd)
J
Jay Cliburn 已提交
2300 2301 2302 2303
{
	struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
	struct atl1_buffer *buffer_info;
	struct tx_packet_desc *tpd;
J
Jay Cliburn 已提交
2304 2305 2306
	u16 j;
	u32 val;
	u16 next_to_use = (u16) atomic_read(&tpd_ring->next_to_use);
J
Jay Cliburn 已提交
2307 2308

	for (j = 0; j < count; j++) {
J
Jay Cliburn 已提交
2309 2310 2311 2312
		buffer_info = &tpd_ring->buffer_info[next_to_use];
		tpd = ATL1_TPD_DESC(&adapter->tpd_ring, next_to_use);
		if (tpd != ptpd)
			memcpy(tpd, ptpd, sizeof(struct tx_packet_desc));
J
Jay Cliburn 已提交
2313
		tpd->buffer_addr = cpu_to_le64(buffer_info->dma);
J
Jay Cliburn 已提交
2314 2315
		tpd->word2 &= ~(TPD_BUFLEN_MASK << TPD_BUFLEN_SHIFT);
		tpd->word2 |= (cpu_to_le16(buffer_info->length) &
J
Jay Cliburn 已提交
2316
			TPD_BUFLEN_MASK) << TPD_BUFLEN_SHIFT;
J
Jay Cliburn 已提交
2317

J
Jay Cliburn 已提交
2318 2319 2320 2321 2322 2323 2324 2325 2326 2327 2328 2329
		/*
		 * if this is the first packet in a TSO chain, set
		 * TPD_HDRFLAG, otherwise, clear it.
		 */
		val = (tpd->word3 >> TPD_SEGMENT_EN_SHIFT) &
			TPD_SEGMENT_EN_MASK;
		if (val) {
			if (!j)
				tpd->word3 |= 1 << TPD_HDRFLAG_SHIFT;
			else
				tpd->word3 &= ~(1 << TPD_HDRFLAG_SHIFT);
		}
J
Jay Cliburn 已提交
2330 2331

		if (j == (count - 1))
J
Jay Cliburn 已提交
2332
			tpd->word3 |= 1 << TPD_EOP_SHIFT;
J
Jay Cliburn 已提交
2333

J
Jay Cliburn 已提交
2334 2335
		if (++next_to_use == tpd_ring->count)
			next_to_use = 0;
J
Jay Cliburn 已提交
2336 2337 2338 2339 2340 2341 2342 2343 2344
	}
	/*
	 * Force memory writes to complete before letting h/w
	 * know there are new descriptors to fetch.  (Only
	 * applicable for weak-ordered memory model archs,
	 * such as IA-64).
	 */
	wmb();

J
Jay Cliburn 已提交
2345
	atomic_set(&tpd_ring->next_to_use, next_to_use);
J
Jay Cliburn 已提交
2346 2347 2348 2349 2350
}

static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
J
Jay Cliburn 已提交
2351
	struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
J
Jay Cliburn 已提交
2352 2353 2354 2355
	int len = skb->len;
	int tso;
	int count = 1;
	int ret_val;
J
Jay Cliburn 已提交
2356
	struct tx_packet_desc *ptpd;
J
Jay Cliburn 已提交
2357 2358 2359 2360 2361 2362 2363 2364 2365
	u16 frag_size;
	u16 vlan_tag;
	unsigned int nr_frags = 0;
	unsigned int mss = 0;
	unsigned int f;
	unsigned int proto_hdr_len;

	len -= skb->data_len;

J
Jay Cliburn 已提交
2366
	if (unlikely(skb->len <= 0)) {
J
Jay Cliburn 已提交
2367 2368 2369 2370 2371 2372 2373 2374
		dev_kfree_skb_any(skb);
		return NETDEV_TX_OK;
	}

	nr_frags = skb_shinfo(skb)->nr_frags;
	for (f = 0; f < nr_frags; f++) {
		frag_size = skb_shinfo(skb)->frags[f].size;
		if (frag_size)
J
Jay Cliburn 已提交
2375 2376
			count += (frag_size + ATL1_MAX_TX_BUF_LEN - 1) /
				ATL1_MAX_TX_BUF_LEN;
J
Jay Cliburn 已提交
2377 2378 2379 2380
	}

	mss = skb_shinfo(skb)->gso_size;
	if (mss) {
J
Jay Cliburn 已提交
2381
		if (skb->protocol == ntohs(ETH_P_IP)) {
2382
			proto_hdr_len = (skb_transport_offset(skb) +
2383
					 tcp_hdrlen(skb));
J
Jay Cliburn 已提交
2384 2385 2386 2387 2388 2389 2390
			if (unlikely(proto_hdr_len > len)) {
				dev_kfree_skb_any(skb);
				return NETDEV_TX_OK;
			}
			/* need additional TPD ? */
			if (proto_hdr_len != len)
				count += (len - proto_hdr_len +
J
Jay Cliburn 已提交
2391 2392
					ATL1_MAX_TX_BUF_LEN - 1) /
					ATL1_MAX_TX_BUF_LEN;
J
Jay Cliburn 已提交
2393 2394 2395
		}
	}

2396
	if (atl1_tpd_avail(&adapter->tpd_ring) < count) {
J
Jay Cliburn 已提交
2397 2398
		/* not enough descriptors */
		netif_stop_queue(netdev);
J
Jay Cliburn 已提交
2399 2400 2401
		if (netif_msg_tx_queued(adapter))
			dev_printk(KERN_DEBUG, &adapter->pdev->dev,
				"tx busy\n");
J
Jay Cliburn 已提交
2402 2403 2404
		return NETDEV_TX_BUSY;
	}

J
Jay Cliburn 已提交
2405 2406 2407
	ptpd = ATL1_TPD_DESC(tpd_ring,
		(u16) atomic_read(&tpd_ring->next_to_use));
	memset(ptpd, 0, sizeof(struct tx_packet_desc));
J
Jay Cliburn 已提交
2408 2409 2410 2411 2412

	if (adapter->vlgrp && vlan_tx_tag_present(skb)) {
		vlan_tag = vlan_tx_tag_get(skb);
		vlan_tag = (vlan_tag << 4) | (vlan_tag >> 13) |
			((vlan_tag >> 9) & 0x8);
J
Jay Cliburn 已提交
2413
		ptpd->word3 |= 1 << TPD_INS_VL_TAG_SHIFT;
J
Jay Cliburn 已提交
2414 2415
		ptpd->word2 |= (vlan_tag & TPD_VLANTAG_MASK) <<
			TPD_VLANTAG_SHIFT;
J
Jay Cliburn 已提交
2416 2417
	}

J
Jay Cliburn 已提交
2418
	tso = atl1_tso(adapter, skb, ptpd);
J
Jay Cliburn 已提交
2419 2420 2421 2422 2423 2424
	if (tso < 0) {
		dev_kfree_skb_any(skb);
		return NETDEV_TX_OK;
	}

	if (!tso) {
J
Jay Cliburn 已提交
2425
		ret_val = atl1_tx_csum(adapter, skb, ptpd);
J
Jay Cliburn 已提交
2426 2427 2428 2429 2430 2431
		if (ret_val < 0) {
			dev_kfree_skb_any(skb);
			return NETDEV_TX_OK;
		}
	}

J
Jay Cliburn 已提交
2432 2433
	atl1_tx_map(adapter, skb, ptpd);
	atl1_tx_queue(adapter, count, ptpd);
J
Jay Cliburn 已提交
2434
	atl1_update_mailbox(adapter);
J
Jay Cliburn 已提交
2435
	mmiowb();
J
Jay Cliburn 已提交
2436
	netdev->trans_start = jiffies;
J
Jay Cliburn 已提交
2437 2438 2439 2440
	return NETDEV_TX_OK;
}

/*
J
Jay Cliburn 已提交
2441 2442 2443 2444
 * atl1_intr - Interrupt Handler
 * @irq: interrupt number
 * @data: pointer to a network interface device structure
 * @pt_regs: CPU registers structure
J
Jay Cliburn 已提交
2445
 */
J
Jay Cliburn 已提交
2446
static irqreturn_t atl1_intr(int irq, void *data)
J
Jay Cliburn 已提交
2447
{
J
Jay Cliburn 已提交
2448 2449 2450
	struct atl1_adapter *adapter = netdev_priv(data);
	u32 status;
	int max_ints = 10;
J
Jay Cliburn 已提交
2451

J
Jay Cliburn 已提交
2452 2453 2454
	status = adapter->cmb.cmb->int_stats;
	if (!status)
		return IRQ_NONE;
J
Jay Cliburn 已提交
2455

J
Jay Cliburn 已提交
2456 2457 2458 2459 2460
	do {
		/* clear CMB interrupt status at once */
		adapter->cmb.cmb->int_stats = 0;

		if (status & ISR_GPHY)	/* clear phy status */
J
Jay Cliburn 已提交
2461
			atlx_clear_phy_int(adapter);
J
Jay Cliburn 已提交
2462 2463 2464 2465 2466 2467 2468 2469 2470 2471

		/* clear ISR status, and Enable CMB DMA/Disable Interrupt */
		iowrite32(status | ISR_DIS_INT, adapter->hw.hw_addr + REG_ISR);

		/* check if SMB intr */
		if (status & ISR_SMB)
			atl1_inc_smb(adapter);

		/* check if PCIE PHY Link down */
		if (status & ISR_PHY_LINKDOWN) {
J
Jay Cliburn 已提交
2472 2473 2474
			if (netif_msg_intr(adapter))
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"pcie phy link down %x\n", status);
J
Jay Cliburn 已提交
2475 2476 2477 2478 2479
			if (netif_running(adapter->netdev)) {	/* reset MAC */
				iowrite32(0, adapter->hw.hw_addr + REG_IMR);
				schedule_work(&adapter->pcie_dma_to_rst_task);
				return IRQ_HANDLED;
			}
J
Jay Cliburn 已提交
2480
		}
J
Jay Cliburn 已提交
2481 2482 2483

		/* check if DMA read/write error ? */
		if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) {
J
Jay Cliburn 已提交
2484 2485 2486 2487
			if (netif_msg_intr(adapter))
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"pcie DMA r/w error (status = 0x%x)\n",
					status);
J
Jay Cliburn 已提交
2488 2489 2490
			iowrite32(0, adapter->hw.hw_addr + REG_IMR);
			schedule_work(&adapter->pcie_dma_to_rst_task);
			return IRQ_HANDLED;
J
Jay Cliburn 已提交
2491 2492
		}

J
Jay Cliburn 已提交
2493 2494 2495 2496 2497
		/* link event */
		if (status & ISR_GPHY) {
			adapter->soft_stats.tx_carrier_errors++;
			atl1_check_for_link(adapter);
		}
J
Jay Cliburn 已提交
2498

J
Jay Cliburn 已提交
2499 2500 2501
		/* transmit event */
		if (status & ISR_CMB_TX)
			atl1_intr_tx(adapter);
J
Jay Cliburn 已提交
2502

J
Jay Cliburn 已提交
2503 2504 2505 2506 2507 2508 2509
		/* rx exception */
		if (unlikely(status & (ISR_RXF_OV | ISR_RFD_UNRUN |
			ISR_RRD_OV | ISR_HOST_RFD_UNRUN |
			ISR_HOST_RRD_OV | ISR_CMB_RX))) {
			if (status & (ISR_RXF_OV | ISR_RFD_UNRUN |
				ISR_RRD_OV | ISR_HOST_RFD_UNRUN |
				ISR_HOST_RRD_OV))
J
Jay Cliburn 已提交
2510 2511 2512 2513 2514
				if (netif_msg_intr(adapter))
					dev_printk(KERN_DEBUG,
						&adapter->pdev->dev,
						"rx exception, ISR = 0x%x\n",
						status);
J
Jay Cliburn 已提交
2515 2516
			atl1_intr_rx(adapter);
		}
J
Jay Cliburn 已提交
2517

J
Jay Cliburn 已提交
2518 2519 2520 2521 2522 2523 2524 2525
		if (--max_ints < 0)
			break;

	} while ((status = adapter->cmb.cmb->int_stats));

	/* re-enable Interrupt */
	iowrite32(ISR_DIS_SMB | ISR_DIS_DMA, adapter->hw.hw_addr + REG_ISR);
	return IRQ_HANDLED;
J
Jay Cliburn 已提交
2526 2527 2528
}

/*
J
Jay Cliburn 已提交
2529 2530
 * atl1_watchdog - Timer Call-back
 * @data: pointer to netdev cast into an unsigned long
J
Jay Cliburn 已提交
2531
 */
J
Jay Cliburn 已提交
2532
static void atl1_watchdog(unsigned long data)
J
Jay Cliburn 已提交
2533
{
J
Jay Cliburn 已提交
2534
	struct atl1_adapter *adapter = (struct atl1_adapter *)data;
J
Jay Cliburn 已提交
2535

J
Jay Cliburn 已提交
2536 2537 2538
	/* Reset the timer */
	mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
}
J
Jay Cliburn 已提交
2539

J
Jay Cliburn 已提交
2540 2541 2542 2543 2544 2545
/*
 * atl1_phy_config - Timer Call-back
 * @data: pointer to netdev cast into an unsigned long
 */
static void atl1_phy_config(unsigned long data)
{
J
Jay Cliburn 已提交
2546 2547
	struct atl1_adapter *adapter = (struct atl1_adapter *)data;
	struct atl1_hw *hw = &adapter->hw;
J
Jay Cliburn 已提交
2548
	unsigned long flags;
J
Jay Cliburn 已提交
2549

J
Jay Cliburn 已提交
2550
	spin_lock_irqsave(&adapter->lock, flags);
J
Jay Cliburn 已提交
2551 2552 2553 2554
	adapter->phy_timer_pending = false;
	atl1_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg);
	atl1_write_phy_reg(hw, MII_ATLX_CR, hw->mii_1000t_ctrl_reg);
	atl1_write_phy_reg(hw, MII_BMCR, MII_CR_RESET | MII_CR_AUTO_NEG_EN);
J
Jay Cliburn 已提交
2555 2556 2557
	spin_unlock_irqrestore(&adapter->lock, flags);
}

J
Jay Cliburn 已提交
2558 2559 2560 2561 2562 2563 2564 2565 2566 2567
/*
 * Orphaned vendor comment left intact here:
 * <vendor comment>
 * If TPD Buffer size equal to 0, PCIE DMAR_TO_INT
 * will assert. We do soft reset <0x1400=1> according
 * with the SPEC. BUT, it seemes that PCIE or DMA
 * state-machine will not be reset. DMAR_TO_INT will
 * assert again and again.
 * </vendor comment>
 */
J
Jay Cliburn 已提交
2568

J
Jay Cliburn 已提交
2569
static int atl1_reset(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
2570 2571 2572
{
	int ret;
	ret = atl1_reset_hw(&adapter->hw);
J
Jay Cliburn 已提交
2573
	if (ret)
J
Jay Cliburn 已提交
2574 2575
		return ret;
	return atl1_init_hw(&adapter->hw);
J
Jay Cliburn 已提交
2576 2577
}

J
Jay Cliburn 已提交
2578
static s32 atl1_up(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
2579 2580 2581 2582 2583 2584
{
	struct net_device *netdev = adapter->netdev;
	int err;
	int irq_flags = IRQF_SAMPLE_RANDOM;

	/* hardware has been reset, we need to reload some things */
J
Jay Cliburn 已提交
2585
	atlx_set_multi(netdev);
2586
	atl1_init_ring_ptrs(adapter);
J
Jay Cliburn 已提交
2587
	atlx_restore_vlan(adapter);
J
Jay Cliburn 已提交
2588
	err = atl1_alloc_rx_buffers(adapter);
J
Jay Cliburn 已提交
2589 2590
	if (unlikely(!err))
		/* no RX BUFFER allocated */
J
Jay Cliburn 已提交
2591 2592 2593 2594 2595 2596 2597 2598 2599
		return -ENOMEM;

	if (unlikely(atl1_configure(adapter))) {
		err = -EIO;
		goto err_up;
	}

	err = pci_enable_msi(adapter->pdev);
	if (err) {
J
Jay Cliburn 已提交
2600 2601 2602
		if (netif_msg_ifup(adapter))
			dev_info(&adapter->pdev->dev,
				"Unable to enable MSI: %d\n", err);
J
Jay Cliburn 已提交
2603 2604 2605 2606 2607 2608 2609 2610 2611
		irq_flags |= IRQF_SHARED;
	}

	err = request_irq(adapter->pdev->irq, &atl1_intr, irq_flags,
			netdev->name, netdev);
	if (unlikely(err))
		goto err_up;

	mod_timer(&adapter->watchdog_timer, jiffies);
J
Jay Cliburn 已提交
2612
	atlx_irq_enable(adapter);
J
Jay Cliburn 已提交
2613
	atl1_check_link(adapter);
2614
	netif_start_queue(netdev);
J
Jay Cliburn 已提交
2615 2616 2617 2618 2619 2620 2621 2622 2623
	return 0;

err_up:
	pci_disable_msi(adapter->pdev);
	/* free rx_buffers */
	atl1_clean_rx_ring(adapter);
	return err;
}

J
Jay Cliburn 已提交
2624
static void atl1_down(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
2625 2626 2627
{
	struct net_device *netdev = adapter->netdev;

J
Jay Cliburn 已提交
2628
	netif_stop_queue(netdev);
J
Jay Cliburn 已提交
2629 2630 2631 2632
	del_timer_sync(&adapter->watchdog_timer);
	del_timer_sync(&adapter->phy_config_timer);
	adapter->phy_timer_pending = false;

J
Jay Cliburn 已提交
2633
	atlx_irq_disable(adapter);
J
Jay Cliburn 已提交
2634 2635 2636 2637 2638 2639 2640 2641 2642 2643 2644 2645 2646
	free_irq(adapter->pdev->irq, netdev);
	pci_disable_msi(adapter->pdev);
	atl1_reset_hw(&adapter->hw);
	adapter->cmb.cmb->int_stats = 0;

	adapter->link_speed = SPEED_0;
	adapter->link_duplex = -1;
	netif_carrier_off(netdev);

	atl1_clean_tx_ring(adapter);
	atl1_clean_rx_ring(adapter);
}

J
Jay Cliburn 已提交
2647 2648 2649 2650 2651 2652 2653 2654
static void atl1_tx_timeout_task(struct work_struct *work)
{
	struct atl1_adapter *adapter =
		container_of(work, struct atl1_adapter, tx_timeout_task);
	struct net_device *netdev = adapter->netdev;

	netif_device_detach(netdev);
	atl1_down(adapter);
2655
	atl1_up(adapter);
J
Jay Cliburn 已提交
2656
	netif_device_attach(netdev);
2657 2658
}

J
Jay Cliburn 已提交
2659 2660 2661 2662 2663 2664 2665 2666
/*
 * atl1_change_mtu - Change the Maximum Transfer Unit
 * @netdev: network interface device structure
 * @new_mtu: new value for maximum frame size
 *
 * Returns 0 on success, negative on failure
 */
static int atl1_change_mtu(struct net_device *netdev, int new_mtu)
2667 2668
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
J
Jay Cliburn 已提交
2669 2670
	int old_mtu = netdev->mtu;
	int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
2671

J
Jay Cliburn 已提交
2672 2673 2674 2675 2676
	if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
	    (max_frame > MAX_JUMBO_FRAME_SIZE)) {
		if (netif_msg_link(adapter))
			dev_warn(&adapter->pdev->dev, "invalid MTU setting\n");
		return -EINVAL;
2677
	}
J
Jay Cliburn 已提交
2678 2679 2680 2681 2682 2683 2684 2685 2686 2687 2688 2689 2690

	adapter->hw.max_frame_size = max_frame;
	adapter->hw.tx_jumbo_task_th = (max_frame + 7) >> 3;
	adapter->rx_buffer_len = (max_frame + 7) & ~7;
	adapter->hw.rx_jumbo_th = adapter->rx_buffer_len / 8;

	netdev->mtu = new_mtu;
	if ((old_mtu != new_mtu) && netif_running(netdev)) {
		atl1_down(adapter);
		atl1_up(adapter);
	}

	return 0;
2691 2692
}

J
Jay Cliburn 已提交
2693 2694 2695 2696 2697 2698 2699 2700 2701 2702 2703 2704 2705 2706 2707 2708 2709
/*
 * atl1_open - Called when a network interface is made active
 * @netdev: network interface device structure
 *
 * Returns 0 on success, negative value on failure
 *
 * The open entry point is called when a network interface is made
 * active by the system (IFF_UP).  At this point all resources needed
 * for transmit and receive operations are allocated, the interrupt
 * handler is registered with the OS, the watchdog timer is started,
 * and the stack is notified that the interface is ready.
 */
static int atl1_open(struct net_device *netdev)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
	int err;

J
Jay Cliburn 已提交
2710 2711
	netif_carrier_off(netdev);

J
Jay Cliburn 已提交
2712 2713 2714 2715 2716 2717 2718 2719 2720 2721 2722 2723 2724 2725 2726 2727 2728 2729 2730 2731 2732 2733 2734 2735 2736 2737 2738 2739 2740 2741 2742 2743 2744 2745 2746
	/* allocate transmit descriptors */
	err = atl1_setup_ring_resources(adapter);
	if (err)
		return err;

	err = atl1_up(adapter);
	if (err)
		goto err_up;

	return 0;

err_up:
	atl1_reset(adapter);
	return err;
}

/*
 * atl1_close - Disables a network interface
 * @netdev: network interface device structure
 *
 * Returns 0, this is not allowed to fail
 *
 * The close entry point is called when an interface is de-activated
 * by the OS.  The hardware is still under the drivers control, but
 * needs to be disabled.  A global MAC reset is issued to stop the
 * hardware, and all transmit and receive resources are freed.
 */
static int atl1_close(struct net_device *netdev)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
	atl1_down(adapter);
	atl1_free_ring_resources(adapter);
	return 0;
}

J
Jay Cliburn 已提交
2747 2748
#ifdef CONFIG_PM
static int atl1_suspend(struct pci_dev *pdev, pm_message_t state)
J
Jay Cliburn 已提交
2749
{
J
Jay Cliburn 已提交
2750 2751 2752 2753 2754
	struct net_device *netdev = pci_get_drvdata(pdev);
	struct atl1_adapter *adapter = netdev_priv(netdev);
	struct atl1_hw *hw = &adapter->hw;
	u32 ctrl = 0;
	u32 wufc = adapter->wol;
2755 2756 2757 2758
	u32 val;
	int retval;
	u16 speed;
	u16 duplex;
J
Jay Cliburn 已提交
2759 2760

	netif_device_detach(netdev);
J
Jay Cliburn 已提交
2761 2762
	if (netif_running(netdev))
		atl1_down(adapter);
J
Jay Cliburn 已提交
2763

2764 2765 2766 2767
	retval = pci_save_state(pdev);
	if (retval)
		return retval;

J
Jay Cliburn 已提交
2768 2769
	atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl);
	atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl);
2770 2771
	val = ctrl & BMSR_LSTATUS;
	if (val)
J
Jay Cliburn 已提交
2772
		wufc &= ~ATLX_WUFC_LNKC;
J
Jay Cliburn 已提交
2773

2774 2775 2776 2777 2778 2779 2780 2781
	if (val && wufc) {
		val = atl1_get_speed_and_duplex(hw, &speed, &duplex);
		if (val) {
			if (netif_msg_ifdown(adapter))
				dev_printk(KERN_DEBUG, &pdev->dev,
					"error getting speed/duplex\n");
			goto disable_wol;
		}
J
Jay Cliburn 已提交
2782 2783 2784

		ctrl = 0;

2785 2786 2787
		/* enable magic packet WOL */
		if (wufc & ATLX_WUFC_MAG)
			ctrl |= (WOL_MAGIC_EN | WOL_MAGIC_PME_EN);
J
Jay Cliburn 已提交
2788
		iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL);
2789 2790 2791 2792 2793 2794 2795 2796 2797 2798 2799 2800 2801
		ioread32(hw->hw_addr + REG_WOL_CTRL);

		/* configure the mac */
		ctrl = MAC_CTRL_RX_EN;
		ctrl |= ((u32)((speed == SPEED_1000) ? MAC_CTRL_SPEED_1000 :
			MAC_CTRL_SPEED_10_100) << MAC_CTRL_SPEED_SHIFT);
		if (duplex == FULL_DUPLEX)
			ctrl |= MAC_CTRL_DUPLX;
		ctrl |= (((u32)adapter->hw.preamble_len &
			MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT);
		if (adapter->vlgrp)
			ctrl |= MAC_CTRL_RMV_VLAN;
		if (wufc & ATLX_WUFC_MAG)
J
Jay Cliburn 已提交
2802 2803
			ctrl |= MAC_CTRL_BC_EN;
		iowrite32(ctrl, hw->hw_addr + REG_MAC_CTRL);
2804 2805 2806 2807 2808 2809 2810 2811 2812 2813
		ioread32(hw->hw_addr + REG_MAC_CTRL);

		/* poke the PHY */
		ctrl = ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
		ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
		iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC);
		ioread32(hw->hw_addr + REG_PCIE_PHYMISC);

		pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
		goto exit;
J
Jay Cliburn 已提交
2814 2815
	}

2816 2817 2818 2819 2820 2821 2822 2823 2824 2825
	if (!val && wufc) {
		ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN);
		iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL);
		ioread32(hw->hw_addr + REG_WOL_CTRL);
		iowrite32(0, hw->hw_addr + REG_MAC_CTRL);
		ioread32(hw->hw_addr + REG_MAC_CTRL);
		hw->phy_configured = false;
		pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
		goto exit;
	}
J
Jay Cliburn 已提交
2826

2827 2828 2829 2830 2831 2832 2833 2834 2835 2836 2837 2838 2839 2840
disable_wol:
	iowrite32(0, hw->hw_addr + REG_WOL_CTRL);
	ioread32(hw->hw_addr + REG_WOL_CTRL);
	ctrl = ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
	ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
	iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC);
	ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
	hw->phy_configured = false;
	pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
exit:
	if (netif_running(netdev))
		pci_disable_msi(adapter->pdev);
	pci_disable_device(pdev);
	pci_set_power_state(pdev, pci_choose_state(pdev, state));
J
Jay Cliburn 已提交
2841 2842

	return 0;
J
Jay Cliburn 已提交
2843 2844
}

J
Jay Cliburn 已提交
2845
static int atl1_resume(struct pci_dev *pdev)
J
Jay Cliburn 已提交
2846
{
J
Jay Cliburn 已提交
2847 2848
	struct net_device *netdev = pci_get_drvdata(pdev);
	struct atl1_adapter *adapter = netdev_priv(netdev);
J
Jay Cliburn 已提交
2849
	u32 err;
J
Jay Cliburn 已提交
2850

J
Jay Cliburn 已提交
2851
	pci_set_power_state(pdev, PCI_D0);
J
Jay Cliburn 已提交
2852 2853
	pci_restore_state(pdev);

J
Jay Cliburn 已提交
2854
	err = pci_enable_device(pdev);
2855 2856 2857 2858 2859 2860 2861 2862 2863
	if (err) {
		if (netif_msg_ifup(adapter))
			dev_printk(KERN_DEBUG, &pdev->dev,
				"error enabling pci device\n");
		return err;
	}

	pci_set_master(pdev);
	iowrite32(0, adapter->hw.hw_addr + REG_WOL_CTRL);
J
Jay Cliburn 已提交
2864 2865 2866
	pci_enable_wake(pdev, PCI_D3hot, 0);
	pci_enable_wake(pdev, PCI_D3cold, 0);

2867 2868
	atl1_reset_hw(&adapter->hw);
	adapter->cmb.cmb->int_stats = 0;
J
Jay Cliburn 已提交
2869 2870 2871 2872 2873 2874

	if (netif_running(netdev))
		atl1_up(adapter);
	netif_device_attach(netdev);

	return 0;
J
Jay Cliburn 已提交
2875
}
J
Jay Cliburn 已提交
2876 2877 2878 2879
#else
#define atl1_suspend NULL
#define atl1_resume NULL
#endif
J
Jay Cliburn 已提交
2880

J
Jay Cliburn 已提交
2881 2882 2883 2884 2885 2886 2887
static void atl1_shutdown(struct pci_dev *pdev)
{
#ifdef CONFIG_PM
	atl1_suspend(pdev, PMSG_SUSPEND);
#endif
}

J
Jay Cliburn 已提交
2888 2889
#ifdef CONFIG_NET_POLL_CONTROLLER
static void atl1_poll_controller(struct net_device *netdev)
J
Jay Cliburn 已提交
2890
{
J
Jay Cliburn 已提交
2891 2892 2893
	disable_irq(netdev->irq);
	atl1_intr(netdev->irq, netdev);
	enable_irq(netdev->irq);
J
Jay Cliburn 已提交
2894
}
J
Jay Cliburn 已提交
2895
#endif
J
Jay Cliburn 已提交
2896 2897 2898 2899 2900 2901 2902 2903 2904 2905 2906 2907 2908

/*
 * atl1_probe - Device Initialization Routine
 * @pdev: PCI device information struct
 * @ent: entry in atl1_pci_tbl
 *
 * Returns 0 on success, negative on failure
 *
 * atl1_probe initializes an adapter identified by a pci_dev structure.
 * The OS initialization, configuring of the adapter private structure,
 * and a hardware reset occur.
 */
static int __devinit atl1_probe(struct pci_dev *pdev,
J
Jay Cliburn 已提交
2909
	const struct pci_device_id *ent)
J
Jay Cliburn 已提交
2910 2911 2912 2913 2914 2915 2916 2917 2918 2919
{
	struct net_device *netdev;
	struct atl1_adapter *adapter;
	static int cards_found = 0;
	int err;

	err = pci_enable_device(pdev);
	if (err)
		return err;

2920
	/*
C
Chris Snook 已提交
2921 2922 2923 2924 2925 2926 2927 2928
	 * The atl1 chip can DMA to 64-bit addresses, but it uses a single
	 * shared register for the high 32 bits, so only a single, aligned,
	 * 4 GB physical address range can be used at a time.
	 *
	 * Supporting 64-bit DMA on this hardware is more trouble than it's
	 * worth.  It is far easier to limit to 32-bit DMA than update
	 * various kernel subsystems to support the mechanics required by a
	 * fixed-high-32-bit system.
2929 2930
	 */
	err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
J
Jay Cliburn 已提交
2931
	if (err) {
2932 2933
		dev_err(&pdev->dev, "no usable DMA configuration\n");
		goto err_dma;
J
Jay Cliburn 已提交
2934
	}
J
Jay Cliburn 已提交
2935 2936
	/*
	 * Mark all PCI regions associated with PCI device
J
Jay Cliburn 已提交
2937 2938
	 * pdev as being reserved by owner atl1_driver_name
	 */
J
Jay Cliburn 已提交
2939
	err = pci_request_regions(pdev, ATLX_DRIVER_NAME);
J
Jay Cliburn 已提交
2940 2941 2942
	if (err)
		goto err_request_regions;

J
Jay Cliburn 已提交
2943 2944
	/*
	 * Enables bus-mastering on the device and calls
J
Jay Cliburn 已提交
2945 2946 2947 2948 2949 2950 2951 2952 2953 2954 2955 2956 2957 2958 2959 2960
	 * pcibios_set_master to do the needed arch specific settings
	 */
	pci_set_master(pdev);

	netdev = alloc_etherdev(sizeof(struct atl1_adapter));
	if (!netdev) {
		err = -ENOMEM;
		goto err_alloc_etherdev;
	}
	SET_NETDEV_DEV(netdev, &pdev->dev);

	pci_set_drvdata(pdev, netdev);
	adapter = netdev_priv(netdev);
	adapter->netdev = netdev;
	adapter->pdev = pdev;
	adapter->hw.back = adapter;
J
Jay Cliburn 已提交
2961
	adapter->msg_enable = netif_msg_init(debug, atl1_default_msg);
J
Jay Cliburn 已提交
2962 2963 2964 2965 2966 2967 2968

	adapter->hw.hw_addr = pci_iomap(pdev, 0, 0);
	if (!adapter->hw.hw_addr) {
		err = -EIO;
		goto err_pci_iomap;
	}
	/* get device revision number */
J
Jay Cliburn 已提交
2969
	adapter->hw.dev_rev = ioread16(adapter->hw.hw_addr +
J
Jay Cliburn 已提交
2970
		(REG_MASTER_CTRL + 2));
J
Jay Cliburn 已提交
2971 2972
	if (netif_msg_probe(adapter))
		dev_info(&pdev->dev, "version %s\n", ATLX_DRIVER_VERSION);
J
Jay Cliburn 已提交
2973 2974 2975 2976 2977 2978 2979 2980 2981 2982 2983 2984 2985 2986

	/* set default ring resource counts */
	adapter->rfd_ring.count = adapter->rrd_ring.count = ATL1_DEFAULT_RFD;
	adapter->tpd_ring.count = ATL1_DEFAULT_TPD;

	adapter->mii.dev = netdev;
	adapter->mii.mdio_read = mdio_read;
	adapter->mii.mdio_write = mdio_write;
	adapter->mii.phy_id_mask = 0x1f;
	adapter->mii.reg_num_mask = 0x1f;

	netdev->open = &atl1_open;
	netdev->stop = &atl1_close;
	netdev->hard_start_xmit = &atl1_xmit_frame;
2987

J
Jay Cliburn 已提交
2988
	netdev->set_multicast_list = &atlx_set_multi;
J
Jay Cliburn 已提交
2989 2990
	netdev->set_mac_address = &atl1_set_mac;
	netdev->change_mtu = &atl1_change_mtu;
J
Jay Cliburn 已提交
2991 2992
	netdev->do_ioctl = &atlx_ioctl;
	netdev->tx_timeout = &atlx_tx_timeout;
J
Jay Cliburn 已提交
2993
	netdev->watchdog_timeo = 5 * HZ;
A
Alexey Dobriyan 已提交
2994 2995 2996
#ifdef CONFIG_NET_POLL_CONTROLLER
	netdev->poll_controller = atl1_poll_controller;
#endif
J
Jay Cliburn 已提交
2997
	netdev->vlan_rx_register = atlx_vlan_rx_register;
2998

J
Jay Cliburn 已提交
2999 3000 3001 3002 3003 3004 3005 3006 3007 3008 3009 3010 3011 3012 3013 3014 3015 3016 3017 3018
	netdev->ethtool_ops = &atl1_ethtool_ops;
	adapter->bd_number = cards_found;

	/* setup the private structure */
	err = atl1_sw_init(adapter);
	if (err)
		goto err_common;

	netdev->features = NETIF_F_HW_CSUM;
	netdev->features |= NETIF_F_SG;
	netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);

	/*
	 * patch for some L1 of old version,
	 * the final version of L1 may not need these
	 * patches
	 */
	/* atl1_pcie_patch(adapter); */

	/* really reset GPHY core */
J
Jay Cliburn 已提交
3019
	iowrite16(0, adapter->hw.hw_addr + REG_PHY_ENABLE);
J
Jay Cliburn 已提交
3020 3021 3022 3023 3024 3025 3026 3027 3028 3029 3030 3031 3032 3033 3034 3035 3036 3037 3038 3039 3040 3041 3042 3043 3044 3045 3046 3047 3048 3049 3050 3051 3052 3053 3054 3055 3056 3057 3058 3059 3060 3061 3062 3063

	/*
	 * reset the controller to
	 * put the device in a known good starting state
	 */
	if (atl1_reset_hw(&adapter->hw)) {
		err = -EIO;
		goto err_common;
	}

	/* copy the MAC address out of the EEPROM */
	atl1_read_mac_addr(&adapter->hw);
	memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);

	if (!is_valid_ether_addr(netdev->dev_addr)) {
		err = -EIO;
		goto err_common;
	}

	atl1_check_options(adapter);

	/* pre-init the MAC, and setup link */
	err = atl1_init_hw(&adapter->hw);
	if (err) {
		err = -EIO;
		goto err_common;
	}

	atl1_pcie_patch(adapter);
	/* assume we have no link for now */
	netif_carrier_off(netdev);
	netif_stop_queue(netdev);

	init_timer(&adapter->watchdog_timer);
	adapter->watchdog_timer.function = &atl1_watchdog;
	adapter->watchdog_timer.data = (unsigned long)adapter;

	init_timer(&adapter->phy_config_timer);
	adapter->phy_config_timer.function = &atl1_phy_config;
	adapter->phy_config_timer.data = (unsigned long)adapter;
	adapter->phy_timer_pending = false;

	INIT_WORK(&adapter->tx_timeout_task, atl1_tx_timeout_task);

J
Jay Cliburn 已提交
3064
	INIT_WORK(&adapter->link_chg_task, atlx_link_chg_task);
J
Jay Cliburn 已提交
3065 3066 3067 3068 3069 3070 3071 3072 3073 3074 3075 3076 3077 3078 3079 3080 3081 3082 3083 3084 3085 3086 3087 3088 3089 3090 3091 3092 3093 3094 3095 3096 3097 3098 3099 3100 3101 3102 3103 3104 3105

	INIT_WORK(&adapter->pcie_dma_to_rst_task, atl1_tx_timeout_task);

	err = register_netdev(netdev);
	if (err)
		goto err_common;

	cards_found++;
	atl1_via_workaround(adapter);
	return 0;

err_common:
	pci_iounmap(pdev, adapter->hw.hw_addr);
err_pci_iomap:
	free_netdev(netdev);
err_alloc_etherdev:
	pci_release_regions(pdev);
err_dma:
err_request_regions:
	pci_disable_device(pdev);
	return err;
}

/*
 * atl1_remove - Device Removal Routine
 * @pdev: PCI device information struct
 *
 * atl1_remove is called by the PCI subsystem to alert the driver
 * that it should release a PCI device.  The could be caused by a
 * Hot-Plug event, or because the driver is going to be removed from
 * memory.
 */
static void __devexit atl1_remove(struct pci_dev *pdev)
{
	struct net_device *netdev = pci_get_drvdata(pdev);
	struct atl1_adapter *adapter;
	/* Device not available. Return. */
	if (!netdev)
		return;

	adapter = netdev_priv(netdev);
C
Chris Snook 已提交
3106

J
Jay Cliburn 已提交
3107 3108
	/*
	 * Some atl1 boards lack persistent storage for their MAC, and get it
C
Chris Snook 已提交
3109 3110 3111 3112
	 * from the BIOS during POST.  If we've been messing with the MAC
	 * address, we need to save the permanent one.
	 */
	if (memcmp(adapter->hw.mac_addr, adapter->hw.perm_mac_addr, ETH_ALEN)) {
J
Jay Cliburn 已提交
3113 3114
		memcpy(adapter->hw.mac_addr, adapter->hw.perm_mac_addr,
			ETH_ALEN);
C
Chris Snook 已提交
3115 3116 3117
		atl1_set_mac_addr(&adapter->hw);
	}

J
Jay Cliburn 已提交
3118
	iowrite16(0, adapter->hw.hw_addr + REG_PHY_ENABLE);
J
Jay Cliburn 已提交
3119 3120 3121 3122 3123 3124 3125 3126
	unregister_netdev(netdev);
	pci_iounmap(pdev, adapter->hw.hw_addr);
	pci_release_regions(pdev);
	free_netdev(netdev);
	pci_disable_device(pdev);
}

static struct pci_driver atl1_driver = {
J
Jay Cliburn 已提交
3127
	.name = ATLX_DRIVER_NAME,
J
Jay Cliburn 已提交
3128 3129 3130 3131
	.id_table = atl1_pci_tbl,
	.probe = atl1_probe,
	.remove = __devexit_p(atl1_remove),
	.suspend = atl1_suspend,
J
Jay Cliburn 已提交
3132 3133
	.resume = atl1_resume,
	.shutdown = atl1_shutdown
J
Jay Cliburn 已提交
3134 3135 3136 3137 3138 3139 3140 3141 3142 3143 3144 3145 3146 3147 3148 3149 3150 3151 3152 3153 3154 3155 3156 3157 3158 3159
};

/*
 * atl1_exit_module - Driver Exit Cleanup Routine
 *
 * atl1_exit_module is called just before the driver is removed
 * from memory.
 */
static void __exit atl1_exit_module(void)
{
	pci_unregister_driver(&atl1_driver);
}

/*
 * atl1_init_module - Driver Registration Routine
 *
 * atl1_init_module is the first routine called when the driver is
 * loaded. All it does is register with the PCI subsystem.
 */
static int __init atl1_init_module(void)
{
	return pci_register_driver(&atl1_driver);
}

module_init(atl1_init_module);
module_exit(atl1_exit_module);
J
Jay Cliburn 已提交
3160 3161 3162 3163 3164 3165 3166 3167 3168 3169 3170 3171 3172 3173 3174 3175 3176 3177 3178 3179 3180 3181 3182 3183 3184 3185 3186 3187 3188 3189 3190 3191 3192 3193 3194 3195 3196 3197 3198 3199 3200 3201 3202 3203

struct atl1_stats {
	char stat_string[ETH_GSTRING_LEN];
	int sizeof_stat;
	int stat_offset;
};

#define ATL1_STAT(m) \
	sizeof(((struct atl1_adapter *)0)->m), offsetof(struct atl1_adapter, m)

static struct atl1_stats atl1_gstrings_stats[] = {
	{"rx_packets", ATL1_STAT(soft_stats.rx_packets)},
	{"tx_packets", ATL1_STAT(soft_stats.tx_packets)},
	{"rx_bytes", ATL1_STAT(soft_stats.rx_bytes)},
	{"tx_bytes", ATL1_STAT(soft_stats.tx_bytes)},
	{"rx_errors", ATL1_STAT(soft_stats.rx_errors)},
	{"tx_errors", ATL1_STAT(soft_stats.tx_errors)},
	{"multicast", ATL1_STAT(soft_stats.multicast)},
	{"collisions", ATL1_STAT(soft_stats.collisions)},
	{"rx_length_errors", ATL1_STAT(soft_stats.rx_length_errors)},
	{"rx_over_errors", ATL1_STAT(soft_stats.rx_missed_errors)},
	{"rx_crc_errors", ATL1_STAT(soft_stats.rx_crc_errors)},
	{"rx_frame_errors", ATL1_STAT(soft_stats.rx_frame_errors)},
	{"rx_fifo_errors", ATL1_STAT(soft_stats.rx_fifo_errors)},
	{"rx_missed_errors", ATL1_STAT(soft_stats.rx_missed_errors)},
	{"tx_aborted_errors", ATL1_STAT(soft_stats.tx_aborted_errors)},
	{"tx_carrier_errors", ATL1_STAT(soft_stats.tx_carrier_errors)},
	{"tx_fifo_errors", ATL1_STAT(soft_stats.tx_fifo_errors)},
	{"tx_window_errors", ATL1_STAT(soft_stats.tx_window_errors)},
	{"tx_abort_exce_coll", ATL1_STAT(soft_stats.excecol)},
	{"tx_abort_late_coll", ATL1_STAT(soft_stats.latecol)},
	{"tx_deferred_ok", ATL1_STAT(soft_stats.deffer)},
	{"tx_single_coll_ok", ATL1_STAT(soft_stats.scc)},
	{"tx_multi_coll_ok", ATL1_STAT(soft_stats.mcc)},
	{"tx_underun", ATL1_STAT(soft_stats.tx_underun)},
	{"tx_trunc", ATL1_STAT(soft_stats.tx_trunc)},
	{"tx_pause", ATL1_STAT(soft_stats.tx_pause)},
	{"rx_pause", ATL1_STAT(soft_stats.rx_pause)},
	{"rx_rrd_ov", ATL1_STAT(soft_stats.rx_rrd_ov)},
	{"rx_trunc", ATL1_STAT(soft_stats.rx_trunc)}
};

static void atl1_get_ethtool_stats(struct net_device *netdev,
	struct ethtool_stats *stats, u64 *data)
3204
{
J
Jay Cliburn 已提交
3205
	struct atl1_adapter *adapter = netdev_priv(netdev);
3206
	int i;
J
Jay Cliburn 已提交
3207
	char *p;
3208

J
Jay Cliburn 已提交
3209 3210 3211 3212
	for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) {
		p = (char *)adapter+atl1_gstrings_stats[i].stat_offset;
		data[i] = (atl1_gstrings_stats[i].sizeof_stat ==
			sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
3213 3214 3215 3216
	}

}

J
Jay Cliburn 已提交
3217
static int atl1_get_sset_count(struct net_device *netdev, int sset)
3218
{
J
Jay Cliburn 已提交
3219 3220 3221 3222 3223 3224
	switch (sset) {
	case ETH_SS_STATS:
		return ARRAY_SIZE(atl1_gstrings_stats);
	default:
		return -EOPNOTSUPP;
	}
3225 3226
}

J
Jay Cliburn 已提交
3227 3228
static int atl1_get_settings(struct net_device *netdev,
	struct ethtool_cmd *ecmd)
3229
{
J
Jay Cliburn 已提交
3230 3231 3232 3233 3234 3235 3236 3237 3238 3239 3240 3241 3242 3243 3244 3245 3246 3247 3248 3249 3250 3251 3252 3253 3254 3255 3256 3257 3258 3259 3260 3261 3262 3263 3264 3265 3266 3267 3268 3269 3270 3271 3272 3273 3274
	struct atl1_adapter *adapter = netdev_priv(netdev);
	struct atl1_hw *hw = &adapter->hw;

	ecmd->supported = (SUPPORTED_10baseT_Half |
			   SUPPORTED_10baseT_Full |
			   SUPPORTED_100baseT_Half |
			   SUPPORTED_100baseT_Full |
			   SUPPORTED_1000baseT_Full |
			   SUPPORTED_Autoneg | SUPPORTED_TP);
	ecmd->advertising = ADVERTISED_TP;
	if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
	    hw->media_type == MEDIA_TYPE_1000M_FULL) {
		ecmd->advertising |= ADVERTISED_Autoneg;
		if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR) {
			ecmd->advertising |= ADVERTISED_Autoneg;
			ecmd->advertising |=
			    (ADVERTISED_10baseT_Half |
			     ADVERTISED_10baseT_Full |
			     ADVERTISED_100baseT_Half |
			     ADVERTISED_100baseT_Full |
			     ADVERTISED_1000baseT_Full);
		} else
			ecmd->advertising |= (ADVERTISED_1000baseT_Full);
	}
	ecmd->port = PORT_TP;
	ecmd->phy_address = 0;
	ecmd->transceiver = XCVR_INTERNAL;

	if (netif_carrier_ok(adapter->netdev)) {
		u16 link_speed, link_duplex;
		atl1_get_speed_and_duplex(hw, &link_speed, &link_duplex);
		ecmd->speed = link_speed;
		if (link_duplex == FULL_DUPLEX)
			ecmd->duplex = DUPLEX_FULL;
		else
			ecmd->duplex = DUPLEX_HALF;
	} else {
		ecmd->speed = -1;
		ecmd->duplex = -1;
	}
	if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
	    hw->media_type == MEDIA_TYPE_1000M_FULL)
		ecmd->autoneg = AUTONEG_ENABLE;
	else
		ecmd->autoneg = AUTONEG_DISABLE;
3275 3276 3277 3278

	return 0;
}

J
Jay Cliburn 已提交
3279 3280
static int atl1_set_settings(struct net_device *netdev,
	struct ethtool_cmd *ecmd)
3281
{
J
Jay Cliburn 已提交
3282 3283
	struct atl1_adapter *adapter = netdev_priv(netdev);
	struct atl1_hw *hw = &adapter->hw;
3284
	u16 phy_data;
J
Jay Cliburn 已提交
3285 3286
	int ret_val = 0;
	u16 old_media_type = hw->media_type;
3287

J
Jay Cliburn 已提交
3288 3289 3290 3291 3292 3293 3294 3295 3296 3297 3298 3299 3300 3301 3302 3303 3304 3305 3306 3307 3308 3309 3310 3311 3312 3313 3314 3315 3316 3317 3318 3319 3320 3321 3322 3323 3324 3325 3326 3327 3328 3329 3330 3331 3332 3333 3334 3335 3336 3337 3338 3339 3340 3341 3342 3343 3344
	if (netif_running(adapter->netdev)) {
		if (netif_msg_link(adapter))
			dev_dbg(&adapter->pdev->dev,
				"ethtool shutting down adapter\n");
		atl1_down(adapter);
	}

	if (ecmd->autoneg == AUTONEG_ENABLE)
		hw->media_type = MEDIA_TYPE_AUTO_SENSOR;
	else {
		if (ecmd->speed == SPEED_1000) {
			if (ecmd->duplex != DUPLEX_FULL) {
				if (netif_msg_link(adapter))
					dev_warn(&adapter->pdev->dev,
						"1000M half is invalid\n");
				ret_val = -EINVAL;
				goto exit_sset;
			}
			hw->media_type = MEDIA_TYPE_1000M_FULL;
		} else if (ecmd->speed == SPEED_100) {
			if (ecmd->duplex == DUPLEX_FULL)
				hw->media_type = MEDIA_TYPE_100M_FULL;
			else
				hw->media_type = MEDIA_TYPE_100M_HALF;
		} else {
			if (ecmd->duplex == DUPLEX_FULL)
				hw->media_type = MEDIA_TYPE_10M_FULL;
			else
				hw->media_type = MEDIA_TYPE_10M_HALF;
		}
	}
	switch (hw->media_type) {
	case MEDIA_TYPE_AUTO_SENSOR:
		ecmd->advertising =
		    ADVERTISED_10baseT_Half |
		    ADVERTISED_10baseT_Full |
		    ADVERTISED_100baseT_Half |
		    ADVERTISED_100baseT_Full |
		    ADVERTISED_1000baseT_Full |
		    ADVERTISED_Autoneg | ADVERTISED_TP;
		break;
	case MEDIA_TYPE_1000M_FULL:
		ecmd->advertising =
		    ADVERTISED_1000baseT_Full |
		    ADVERTISED_Autoneg | ADVERTISED_TP;
		break;
	default:
		ecmd->advertising = 0;
		break;
	}
	if (atl1_phy_setup_autoneg_adv(hw)) {
		ret_val = -EINVAL;
		if (netif_msg_link(adapter))
			dev_warn(&adapter->pdev->dev,
				"invalid ethtool speed/duplex setting\n");
		goto exit_sset;
	}
3345 3346 3347 3348 3349 3350 3351 3352 3353 3354 3355 3356 3357 3358 3359 3360 3361 3362 3363 3364 3365 3366 3367
	if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
	    hw->media_type == MEDIA_TYPE_1000M_FULL)
		phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
	else {
		switch (hw->media_type) {
		case MEDIA_TYPE_100M_FULL:
			phy_data =
			    MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 |
			    MII_CR_RESET;
			break;
		case MEDIA_TYPE_100M_HALF:
			phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
			break;
		case MEDIA_TYPE_10M_FULL:
			phy_data =
			    MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
			break;
		default:
			/* MEDIA_TYPE_10M_HALF: */
			phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
			break;
		}
	}
J
Jay Cliburn 已提交
3368 3369 3370 3371
	atl1_write_phy_reg(hw, MII_BMCR, phy_data);
exit_sset:
	if (ret_val)
		hw->media_type = old_media_type;
3372

J
Jay Cliburn 已提交
3373 3374 3375 3376 3377 3378 3379 3380 3381 3382 3383 3384 3385
	if (netif_running(adapter->netdev)) {
		if (netif_msg_link(adapter))
			dev_dbg(&adapter->pdev->dev,
				"ethtool starting adapter\n");
		atl1_up(adapter);
	} else if (!ret_val) {
		if (netif_msg_link(adapter))
			dev_dbg(&adapter->pdev->dev,
				"ethtool resetting adapter\n");
		atl1_reset(adapter);
	}
	return ret_val;
}
3386

J
Jay Cliburn 已提交
3387 3388 3389 3390
static void atl1_get_drvinfo(struct net_device *netdev,
	struct ethtool_drvinfo *drvinfo)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
3391

J
Jay Cliburn 已提交
3392 3393 3394 3395 3396 3397 3398 3399 3400 3401 3402 3403 3404 3405 3406 3407 3408 3409 3410 3411 3412 3413 3414 3415 3416 3417 3418 3419 3420 3421 3422 3423 3424 3425 3426 3427 3428 3429 3430 3431 3432 3433 3434
	strncpy(drvinfo->driver, ATLX_DRIVER_NAME, sizeof(drvinfo->driver));
	strncpy(drvinfo->version, ATLX_DRIVER_VERSION,
		sizeof(drvinfo->version));
	strncpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
	strncpy(drvinfo->bus_info, pci_name(adapter->pdev),
		sizeof(drvinfo->bus_info));
	drvinfo->eedump_len = ATL1_EEDUMP_LEN;
}

static void atl1_get_wol(struct net_device *netdev,
	struct ethtool_wolinfo *wol)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);

	wol->supported = WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC;
	wol->wolopts = 0;
	if (adapter->wol & ATLX_WUFC_EX)
		wol->wolopts |= WAKE_UCAST;
	if (adapter->wol & ATLX_WUFC_MC)
		wol->wolopts |= WAKE_MCAST;
	if (adapter->wol & ATLX_WUFC_BC)
		wol->wolopts |= WAKE_BCAST;
	if (adapter->wol & ATLX_WUFC_MAG)
		wol->wolopts |= WAKE_MAGIC;
	return;
}

static int atl1_set_wol(struct net_device *netdev,
	struct ethtool_wolinfo *wol)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);

	if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
		return -EOPNOTSUPP;
	adapter->wol = 0;
	if (wol->wolopts & WAKE_UCAST)
		adapter->wol |= ATLX_WUFC_EX;
	if (wol->wolopts & WAKE_MCAST)
		adapter->wol |= ATLX_WUFC_MC;
	if (wol->wolopts & WAKE_BCAST)
		adapter->wol |= ATLX_WUFC_BC;
	if (wol->wolopts & WAKE_MAGIC)
		adapter->wol |= ATLX_WUFC_MAG;
3435 3436 3437
	return 0;
}

J
Jay Cliburn 已提交
3438
static u32 atl1_get_msglevel(struct net_device *netdev)
3439
{
J
Jay Cliburn 已提交
3440 3441 3442
	struct atl1_adapter *adapter = netdev_priv(netdev);
	return adapter->msg_enable;
}
3443

J
Jay Cliburn 已提交
3444 3445 3446 3447 3448
static void atl1_set_msglevel(struct net_device *netdev, u32 value)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
	adapter->msg_enable = value;
}
3449

J
Jay Cliburn 已提交
3450 3451 3452 3453
static int atl1_get_regs_len(struct net_device *netdev)
{
	return ATL1_REG_COUNT * sizeof(u32);
}
3454

J
Jay Cliburn 已提交
3455 3456 3457 3458 3459 3460 3461
static void atl1_get_regs(struct net_device *netdev, struct ethtool_regs *regs,
	void *p)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
	struct atl1_hw *hw = &adapter->hw;
	unsigned int i;
	u32 *regbuf = p;
3462

J
Jay Cliburn 已提交
3463 3464 3465 3466 3467 3468 3469 3470 3471 3472 3473 3474 3475 3476 3477 3478 3479 3480 3481 3482 3483 3484 3485 3486 3487 3488 3489 3490 3491 3492 3493 3494 3495 3496 3497 3498 3499
	for (i = 0; i < ATL1_REG_COUNT; i++) {
		/*
		 * This switch statement avoids reserved regions
		 * of register space.
		 */
		switch (i) {
		case 6 ... 9:
		case 14:
		case 29 ... 31:
		case 34 ... 63:
		case 75 ... 127:
		case 136 ... 1023:
		case 1027 ... 1087:
		case 1091 ... 1151:
		case 1194 ... 1195:
		case 1200 ... 1201:
		case 1206 ... 1213:
		case 1216 ... 1279:
		case 1290 ... 1311:
		case 1323 ... 1343:
		case 1358 ... 1359:
		case 1368 ... 1375:
		case 1378 ... 1383:
		case 1388 ... 1391:
		case 1393 ... 1395:
		case 1402 ... 1403:
		case 1410 ... 1471:
		case 1522 ... 1535:
			/* reserved region; don't read it */
			regbuf[i] = 0;
			break;
		default:
			/* unreserved region */
			regbuf[i] = ioread32(hw->hw_addr + (i * sizeof(u32)));
		}
	}
}
3500

J
Jay Cliburn 已提交
3501 3502 3503 3504 3505 3506
static void atl1_get_ringparam(struct net_device *netdev,
	struct ethtool_ringparam *ring)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
	struct atl1_tpd_ring *txdr = &adapter->tpd_ring;
	struct atl1_rfd_ring *rxdr = &adapter->rfd_ring;
3507

J
Jay Cliburn 已提交
3508 3509 3510 3511 3512 3513 3514 3515 3516
	ring->rx_max_pending = ATL1_MAX_RFD;
	ring->tx_max_pending = ATL1_MAX_TPD;
	ring->rx_mini_max_pending = 0;
	ring->rx_jumbo_max_pending = 0;
	ring->rx_pending = rxdr->count;
	ring->tx_pending = txdr->count;
	ring->rx_mini_pending = 0;
	ring->rx_jumbo_pending = 0;
}
3517

J
Jay Cliburn 已提交
3518 3519 3520 3521 3522 3523 3524
static int atl1_set_ringparam(struct net_device *netdev,
	struct ethtool_ringparam *ring)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
	struct atl1_tpd_ring *tpdr = &adapter->tpd_ring;
	struct atl1_rrd_ring *rrdr = &adapter->rrd_ring;
	struct atl1_rfd_ring *rfdr = &adapter->rfd_ring;
3525

J
Jay Cliburn 已提交
3526 3527 3528 3529 3530
	struct atl1_tpd_ring tpd_old, tpd_new;
	struct atl1_rfd_ring rfd_old, rfd_new;
	struct atl1_rrd_ring rrd_old, rrd_new;
	struct atl1_ring_header rhdr_old, rhdr_new;
	int err;
3531

J
Jay Cliburn 已提交
3532 3533 3534 3535
	tpd_old = adapter->tpd_ring;
	rfd_old = adapter->rfd_ring;
	rrd_old = adapter->rrd_ring;
	rhdr_old = adapter->ring_header;
3536

J
Jay Cliburn 已提交
3537 3538
	if (netif_running(adapter->netdev))
		atl1_down(adapter);
3539

J
Jay Cliburn 已提交
3540 3541 3542 3543 3544
	rfdr->count = (u16) max(ring->rx_pending, (u32) ATL1_MIN_RFD);
	rfdr->count = rfdr->count > ATL1_MAX_RFD ? ATL1_MAX_RFD :
			rfdr->count;
	rfdr->count = (rfdr->count + 3) & ~3;
	rrdr->count = rfdr->count;
3545

J
Jay Cliburn 已提交
3546 3547 3548 3549 3550 3551 3552 3553 3554 3555 3556 3557 3558 3559 3560
	tpdr->count = (u16) max(ring->tx_pending, (u32) ATL1_MIN_TPD);
	tpdr->count = tpdr->count > ATL1_MAX_TPD ? ATL1_MAX_TPD :
			tpdr->count;
	tpdr->count = (tpdr->count + 3) & ~3;

	if (netif_running(adapter->netdev)) {
		/* try to get new resources before deleting old */
		err = atl1_setup_ring_resources(adapter);
		if (err)
			goto err_setup_ring;

		/*
		 * save the new, restore the old in order to free it,
		 * then restore the new back again
		 */
3561

J
Jay Cliburn 已提交
3562 3563 3564 3565 3566 3567 3568 3569 3570 3571 3572 3573 3574
		rfd_new = adapter->rfd_ring;
		rrd_new = adapter->rrd_ring;
		tpd_new = adapter->tpd_ring;
		rhdr_new = adapter->ring_header;
		adapter->rfd_ring = rfd_old;
		adapter->rrd_ring = rrd_old;
		adapter->tpd_ring = tpd_old;
		adapter->ring_header = rhdr_old;
		atl1_free_ring_resources(adapter);
		adapter->rfd_ring = rfd_new;
		adapter->rrd_ring = rrd_new;
		adapter->tpd_ring = tpd_new;
		adapter->ring_header = rhdr_new;
3575

J
Jay Cliburn 已提交
3576 3577 3578 3579
		err = atl1_up(adapter);
		if (err)
			return err;
	}
3580
	return 0;
J
Jay Cliburn 已提交
3581 3582 3583 3584 3585 3586 3587 3588

err_setup_ring:
	adapter->rfd_ring = rfd_old;
	adapter->rrd_ring = rrd_old;
	adapter->tpd_ring = tpd_old;
	adapter->ring_header = rhdr_old;
	atl1_up(adapter);
	return err;
3589 3590
}

J
Jay Cliburn 已提交
3591 3592
static void atl1_get_pauseparam(struct net_device *netdev,
	struct ethtool_pauseparam *epause)
3593
{
J
Jay Cliburn 已提交
3594 3595
	struct atl1_adapter *adapter = netdev_priv(netdev);
	struct atl1_hw *hw = &adapter->hw;
3596

J
Jay Cliburn 已提交
3597 3598 3599 3600 3601
	if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
	    hw->media_type == MEDIA_TYPE_1000M_FULL) {
		epause->autoneg = AUTONEG_ENABLE;
	} else {
		epause->autoneg = AUTONEG_DISABLE;
3602
	}
J
Jay Cliburn 已提交
3603 3604
	epause->rx_pause = 1;
	epause->tx_pause = 1;
3605 3606
}

J
Jay Cliburn 已提交
3607 3608
static int atl1_set_pauseparam(struct net_device *netdev,
	struct ethtool_pauseparam *epause)
3609
{
J
Jay Cliburn 已提交
3610 3611
	struct atl1_adapter *adapter = netdev_priv(netdev);
	struct atl1_hw *hw = &adapter->hw;
3612

J
Jay Cliburn 已提交
3613 3614 3615 3616 3617 3618 3619 3620 3621 3622 3623
	if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
	    hw->media_type == MEDIA_TYPE_1000M_FULL) {
		epause->autoneg = AUTONEG_ENABLE;
	} else {
		epause->autoneg = AUTONEG_DISABLE;
	}

	epause->rx_pause = 1;
	epause->tx_pause = 1;

	return 0;
3624 3625
}

J
Jay Cliburn 已提交
3626 3627
/* FIXME: is this right? -- CHS */
static u32 atl1_get_rx_csum(struct net_device *netdev)
3628
{
J
Jay Cliburn 已提交
3629 3630
	return 1;
}
3631

J
Jay Cliburn 已提交
3632 3633 3634 3635 3636
static void atl1_get_strings(struct net_device *netdev, u32 stringset,
	u8 *data)
{
	u8 *p = data;
	int i;
3637

J
Jay Cliburn 已提交
3638 3639 3640 3641 3642 3643 3644 3645
	switch (stringset) {
	case ETH_SS_STATS:
		for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) {
			memcpy(p, atl1_gstrings_stats[i].stat_string,
				ETH_GSTRING_LEN);
			p += ETH_GSTRING_LEN;
		}
		break;
3646 3647 3648
	}
}

J
Jay Cliburn 已提交
3649
static int atl1_nway_reset(struct net_device *netdev)
3650
{
J
Jay Cliburn 已提交
3651 3652
	struct atl1_adapter *adapter = netdev_priv(netdev);
	struct atl1_hw *hw = &adapter->hw;
3653

J
Jay Cliburn 已提交
3654 3655 3656
	if (netif_running(netdev)) {
		u16 phy_data;
		atl1_down(adapter);
3657

J
Jay Cliburn 已提交
3658 3659 3660 3661 3662 3663 3664 3665 3666 3667 3668 3669 3670 3671 3672 3673 3674 3675 3676 3677 3678 3679 3680
		if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
			hw->media_type == MEDIA_TYPE_1000M_FULL) {
			phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
		} else {
			switch (hw->media_type) {
			case MEDIA_TYPE_100M_FULL:
				phy_data = MII_CR_FULL_DUPLEX |
					MII_CR_SPEED_100 | MII_CR_RESET;
				break;
			case MEDIA_TYPE_100M_HALF:
				phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
				break;
			case MEDIA_TYPE_10M_FULL:
				phy_data = MII_CR_FULL_DUPLEX |
					MII_CR_SPEED_10 | MII_CR_RESET;
				break;
			default:
				/* MEDIA_TYPE_10M_HALF */
				phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
			}
		}
		atl1_write_phy_reg(hw, MII_BMCR, phy_data);
		atl1_up(adapter);
3681 3682 3683 3684
	}
	return 0;
}

J
Jay Cliburn 已提交
3685 3686 3687 3688 3689 3690 3691 3692 3693 3694 3695 3696 3697 3698 3699 3700 3701 3702 3703 3704 3705 3706 3707 3708
const struct ethtool_ops atl1_ethtool_ops = {
	.get_settings		= atl1_get_settings,
	.set_settings		= atl1_set_settings,
	.get_drvinfo		= atl1_get_drvinfo,
	.get_wol		= atl1_get_wol,
	.set_wol		= atl1_set_wol,
	.get_msglevel		= atl1_get_msglevel,
	.set_msglevel		= atl1_set_msglevel,
	.get_regs_len		= atl1_get_regs_len,
	.get_regs		= atl1_get_regs,
	.get_ringparam		= atl1_get_ringparam,
	.set_ringparam		= atl1_set_ringparam,
	.get_pauseparam		= atl1_get_pauseparam,
	.set_pauseparam		= atl1_set_pauseparam,
	.get_rx_csum		= atl1_get_rx_csum,
	.set_tx_csum		= ethtool_op_set_tx_hw_csum,
	.get_link		= ethtool_op_get_link,
	.set_sg			= ethtool_op_set_sg,
	.get_strings		= atl1_get_strings,
	.nway_reset		= atl1_nway_reset,
	.get_ethtool_stats	= atl1_get_ethtool_stats,
	.get_sset_count		= atl1_get_sset_count,
	.set_tso		= ethtool_op_set_tso,
};