- 04 4月, 2019 2 次提交
-
-
由 Anand Jain 提交于
The compression property resets to NULL, instead of the old value if we fail to set the new compression parameter. $ btrfs prop get /btrfs compression compression=lzo $ btrfs prop set /btrfs compression zli ERROR: failed to set compression for /btrfs: Invalid argument $ btrfs prop get /btrfs compression This is because the compression property ->validate() is successful for 'zli' as the strncmp() used the length passed from the userspace. Fix it by using the expected string length in strncmp(). Fixes: 63541927 ("Btrfs: add support for inode properties") Fixes: 5c1aab1d ("btrfs: Add zstd support") CC: stable@vger.kernel.org # 4.14+ Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NAnand Jain <anand.jain@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Anand Jain 提交于
We let pass zstd compression parameter even if it is not fully valid. For example: $ btrfs prop set /btrfs compression zst $ btrfs prop get /btrfs compression compression=zst zlib and lzo are fine. Fix it by checking the correct prefix length. Fixes: 5c1aab1d ("btrfs: Add zstd support") CC: stable@vger.kernel.org # 4.14+ Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NAnand Jain <anand.jain@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 29 3月, 2019 1 次提交
-
-
由 Filipe Manana 提交于
Whan a filesystem is mounted with the nologreplay mount option, which requires it to be mounted in RO mode as well, we can not allow discard on free space inside block groups, because log trees refer to extents that are not pinned in a block group's free space cache (pinning the extents is precisely the first phase of replaying a log tree). So do not allow the fitrim ioctl to do anything when the filesystem is mounted with the nologreplay option, because later it can be mounted RW without that option, which causes log replay to happen and result in either a failure to replay the log trees (leading to a mount failure), a crash or some silent corruption. Reported-by: NDarrick J. Wong <darrick.wong@oracle.com> Fixes: 96da0919 ("btrfs: Introduce new mount option to disable tree log replay") CC: stable@vger.kernel.org # 4.9+ Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NFilipe Manana <fdmanana@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 21 3月, 2019 1 次提交
-
-
由 Filipe Manana 提交于
Back in commit a89ca6f2 ("Btrfs: fix fsync after truncate when no_holes feature is enabled") I added an assertion that is triggered when an inline extent is found to assert that the length of the (uncompressed) data the extent represents is the same as the i_size of the inode, since that is true most of the time I couldn't find or didn't remembered about any exception at that time. Later on the assertion was expanded twice to deal with a case of a compressed inline extent representing a range that matches the sector size followed by an expanding truncate, and another case where fallocate can update the i_size of the inode without adding or updating existing extents (if the fallocate range falls entirely within the first block of the file). These two expansion/fixes of the assertion were done by commit 7ed586d0 ("Btrfs: fix assertion on fsync of regular file when using no-holes feature") and commit 6399fb5a ("Btrfs: fix assertion failure during fsync in no-holes mode"). These however missed the case where an falloc expands the i_size of an inode to exactly the sector size and inline extent exists, for example: $ mkfs.btrfs -f -O no-holes /dev/sdc $ mount /dev/sdc /mnt $ xfs_io -f -c "pwrite -S 0xab 0 1096" /mnt/foobar wrote 1096/1096 bytes at offset 0 1 KiB, 1 ops; 0.0002 sec (4.448 MiB/sec and 4255.3191 ops/sec) $ xfs_io -c "falloc 1096 3000" /mnt/foobar $ xfs_io -c "fsync" /mnt/foobar Segmentation fault $ dmesg [701253.602385] assertion failed: len == i_size || (len == fs_info->sectorsize && btrfs_file_extent_compression(leaf, extent) != BTRFS_COMPRESS_NONE) || (len < i_size && i_size < fs_info->sectorsize), file: fs/btrfs/tree-log.c, line: 4727 [701253.602962] ------------[ cut here ]------------ [701253.603224] kernel BUG at fs/btrfs/ctree.h:3533! [701253.603503] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI [701253.603774] CPU: 2 PID: 7192 Comm: xfs_io Tainted: G W 5.0.0-rc8-btrfs-next-45 #1 [701253.604054] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [701253.604650] RIP: 0010:assfail.constprop.23+0x18/0x1a [btrfs] (...) [701253.605591] RSP: 0018:ffffbb48c186bc48 EFLAGS: 00010286 [701253.605914] RAX: 00000000000000de RBX: ffff921d0a7afc08 RCX: 0000000000000000 [701253.606244] RDX: 0000000000000000 RSI: ffff921d36b16868 RDI: ffff921d36b16868 [701253.606580] RBP: ffffbb48c186bcf0 R08: 0000000000000000 R09: 0000000000000000 [701253.606913] R10: 0000000000000003 R11: 0000000000000000 R12: ffff921d05d2de18 [701253.607247] R13: ffff921d03b54000 R14: 0000000000000448 R15: ffff921d059ecf80 [701253.607769] FS: 00007f14da906700(0000) GS:ffff921d36b00000(0000) knlGS:0000000000000000 [701253.608163] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [701253.608516] CR2: 000056087ea9f278 CR3: 00000002268e8001 CR4: 00000000003606e0 [701253.608880] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [701253.609250] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [701253.609608] Call Trace: [701253.609994] btrfs_log_inode+0xdfb/0xe40 [btrfs] [701253.610383] btrfs_log_inode_parent+0x2be/0xa60 [btrfs] [701253.610770] ? do_raw_spin_unlock+0x49/0xc0 [701253.611150] btrfs_log_dentry_safe+0x4a/0x70 [btrfs] [701253.611537] btrfs_sync_file+0x3b2/0x440 [btrfs] [701253.612010] ? do_sysinfo+0xb0/0xf0 [701253.612552] do_fsync+0x38/0x60 [701253.612988] __x64_sys_fsync+0x10/0x20 [701253.613360] do_syscall_64+0x60/0x1b0 [701253.613733] entry_SYSCALL_64_after_hwframe+0x49/0xbe [701253.614103] RIP: 0033:0x7f14da4e66d0 (...) [701253.615250] RSP: 002b:00007fffa670fdb8 EFLAGS: 00000246 ORIG_RAX: 000000000000004a [701253.615647] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f14da4e66d0 [701253.616047] RDX: 000056087ea9c260 RSI: 000056087ea9c260 RDI: 0000000000000003 [701253.616450] RBP: 0000000000000001 R08: 0000000000000020 R09: 0000000000000010 [701253.616854] R10: 000000000000009b R11: 0000000000000246 R12: 000056087ea9c260 [701253.617257] R13: 000056087ea9c240 R14: 0000000000000000 R15: 000056087ea9dd10 (...) [701253.619941] ---[ end trace e088d74f132b6da5 ]--- Updating the assertion again to allow for this particular case would result in a meaningless assertion, plus there is currently no risk of logging content that would result in any corruption after a log replay if the size of the data encoded in an inline extent is greater than the inode's i_size (which is not currently possibe either with or without compression), therefore just remove the assertion. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 19 3月, 2019 3 次提交
-
-
由 Nikolay Borisov 提交于
qgroup_rsv_size is calculated as the product of outstanding_extent * fs_info->nodesize. The product is calculated with 32 bit precision since both variables are defined as u32. Yet qgroup_rsv_size expects a 64 bit result. Avoid possible multiplication overflow by casting outstanding_extent to u64. Such overflow would in the worst case (64K nodesize) require more than 65536 extents, which is quite large and i'ts not likely that it would happen in practice. Fixes-coverity-id: 1435101 Fixes: ff6bc37e ("btrfs: qgroup: Use independent and accurate per inode qgroup rsv") CC: stable@vger.kernel.org # 4.19+ Reviewed-by: NQu Wenruo <wqu@suse.com> Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
If 'cur_level' is 7 then the bound checking at the top of the function will actually pass. Later on, it's possible to dereference ds_path->nodes[cur_level+1] which will be an out of bounds. The correct check will be cur_level >= BTRFS_MAX_LEVEL - 1 . Fixes-coverty-id: 1440918 Fixes-coverty-id: 1440911 Fixes: ea49f3e7 ("btrfs: qgroup: Introduce function to find all new tree blocks of reloc tree") CC: stable@vger.kernel.org # 4.20+ Reviewed-by: NQu Wenruo <wqu@suse.com> Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Andrea Righi 提交于
Parity page is incorrectly unmapped in finish_parity_scrub(), triggering a reference counter bug on i386, i.e.: [ 157.662401] kernel BUG at mm/highmem.c:349! [ 157.666725] invalid opcode: 0000 [#1] SMP PTI The reason is that kunmap(p_page) was completely left out, so we never did an unmap for the p_page and the loop unmapping the rbio page was iterating over the wrong number of stripes: unmapping should be done with nr_data instead of rbio->real_stripes. Test case to reproduce the bug: - create a raid5 btrfs filesystem: # mkfs.btrfs -m raid5 -d raid5 /dev/sdb /dev/sdc /dev/sdd /dev/sde - mount it: # mount /dev/sdb /mnt - run btrfs scrub in a loop: # while :; do btrfs scrub start -BR /mnt; done BugLink: https://bugs.launchpad.net/bugs/1812845 Fixes: 5a6ac9ea ("Btrfs, raid56: support parity scrub on raid56") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NAndrea Righi <andrea.righi@canonical.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 14 3月, 2019 4 次提交
-
-
由 David Sterba 提交于
As readahead is an optimization, all errors are usually filtered out, but still properly handled when the real read call is done. The commit 5e9d3982 ("btrfs: readpages() should submit IO as read-ahead") added REQ_RAHEAD to readpages() because that's only used for readahead (despite what one would expect from the callback name). This causes a flood of messages and inflated read error stats, so skip reporting in case it's readahead. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202403Reported-by: NLimeTech <tomm@lime-technology.com> Fixes: 5e9d3982 ("btrfs: readpages() should submit IO as read-ahead") CC: stable@vger.kernel.org # 4.19+ Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Filipe Manana 提交于
When we are mixing buffered writes with direct IO writes against the same file and snapshotting is happening concurrently, we can end up with a corrupt file content in the snapshot. Example: 1) Inode/file is empty. 2) Snapshotting starts. 2) Buffered write at offset 0 length 256Kb. This updates the i_size of the inode to 256Kb, disk_i_size remains zero. This happens after the task doing the snapshot flushes all existing delalloc. 3) DIO write at offset 256Kb length 768Kb. Once the ordered extent completes it sets the inode's disk_i_size to 1Mb (256Kb + 768Kb) and updates the inode item in the fs tree with a size of 1Mb (which is the value of disk_i_size). 4) The dealloc for the range [0, 256Kb[ did not start yet. 5) The transaction used in the DIO ordered extent completion, which updated the inode item, is committed by the snapshotting task. 6) Snapshot creation completes. 7) Dealloc for the range [0, 256Kb[ is flushed. After that when reading the file from the snapshot we always get zeroes for the range [0, 256Kb[, the file has a size of 1Mb and the data written by the direct IO write is found. From an application's point of view this is a corruption, since in the source subvolume it could never read a version of the file that included the data from the direct IO write without the data from the buffered write included as well. In the snapshot's tree, file extent items are missing for the range [0, 256Kb[. The issue, obviously, does not happen when using the -o flushoncommit mount option. Fix this by flushing delalloc for all the roots that are about to be snapshotted when committing a transaction. This guarantees total ordering when updating the disk_i_size of an inode since the flush for dealloc is done when a transaction is in the TRANS_STATE_COMMIT_START state and wait is done once no more external writers exist. This is similar to what we do when using the flushoncommit mount option, but we do it only if the transaction has snapshots to create and only for the roots of the subvolumes to be snapshotted. The bulk of the dealloc is flushed in the snapshot creation ioctl, so the flush work we do inside the transaction is minimized. This issue, involving buffered and direct IO writes with snapshotting, is often triggered by fstest btrfs/078, and got reported by fsck when not using the NO_HOLES features, for example: $ cat results/btrfs/078.full (...) _check_btrfs_filesystem: filesystem on /dev/sdc is inconsistent *** fsck.btrfs output *** [1/7] checking root items [2/7] checking extents [3/7] checking free space cache [4/7] checking fs roots root 258 inode 264 errors 100, file extent discount Found file extent holes: start: 524288, len: 65536 ERROR: errors found in fs roots Signed-off-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
When Filipe added the recursive directory logging stuff in 2f2ff0ee ("Btrfs: fix metadata inconsistencies after directory fsync") he specifically didn't take the directory i_mutex for the children directories that we need to log because of lockdep. This is generally fine, but can lead to this WARN_ON() tripping if we happen to run delayed deletion's in between our first search and our second search of dir_item/dir_indexes for this directory. We expect this to happen, so the WARN_ON() isn't necessary. Drop the WARN_ON() and add a comment so we know why this case can happen. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Filipe Manana 提交于
If we do a shrinking truncate against an inode which is already present in the respective log tree and then rename it, as part of logging the new name we end up logging an inode item that reflects the old size of the file (the one which we previously logged) and not the new smaller size. The decision to preserve the size previously logged was added by commit 1a4bcf47 ("Btrfs: fix fsync data loss after adding hard link to inode") in order to avoid data loss after replaying the log. However that decision is only needed for the case the logged inode size is smaller then the current size of the inode, as explained in that commit's change log. If the current size of the inode is smaller then the previously logged size, we know a shrinking truncate happened and therefore need to use that smaller size. Example to trigger the problem: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ xfs_io -f -c "pwrite -S 0xab 0 8000" /mnt/foo $ xfs_io -c "fsync" /mnt/foo $ xfs_io -c "truncate 3000" /mnt/foo $ mv /mnt/foo /mnt/bar $ xfs_io -c "fsync" /mnt/bar <power failure> $ mount /dev/sdb /mnt $ od -t x1 -A d /mnt/bar 0000000 ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab * 0008000 Once we rename the file, we log its name (and inode item), and because the inode was already logged before in the current transaction, we log it with a size of 8000 bytes because that is the size we previously logged (with the first fsync). As part of the rename, besides logging the inode, we do also sync the log, which is done since commit d4682ba0 ("Btrfs: sync log after logging new name"), so the next fsync against our inode is effectively a no-op, since no new changes happened since the rename operation. Even if did not sync the log during the rename operation, the same problem (fize size of 8000 bytes instead of 3000 bytes) would be visible after replaying the log if the log ended up getting synced to disk through some other means, such as for example by fsyncing some other modified file. In the example above the fsync after the rename operation is there just because not every filesystem may guarantee logging/journalling the inode (and syncing the log/journal) during the rename operation, for example it is needed for f2fs, but not for ext4 and xfs. Fix this scenario by, when logging a new name (which is triggered by rename and link operations), using the current size of the inode instead of the previously logged inode size. A test case for fstests follows soon. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202695 CC: stable@vger.kernel.org # 4.4+ Reported-by: NSeulbae Kim <seulbae@gatech.edu> Signed-off-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 13 3月, 2019 1 次提交
-
-
由 Nikolay Borisov 提交于
All users of VM_MAX_READAHEAD actually convert it to kbytes and then to pages. Define the macro explicitly as (SZ_128K / PAGE_SIZE). This simplifies the expression in every filesystem. Also rename the macro to VM_READAHEAD_PAGES to properly convey its meaning. Finally remove unused VM_MIN_READAHEAD [akpm@linux-foundation.org: fix fs/io_uring.c, per Stephen] Link: http://lkml.kernel.org/r/20181221144053.24318-1-nborisov@suse.comSigned-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NMatthew Wilcox <willy@infradead.org> Reviewed-by: NDavid Hildenbrand <david@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Latchesar Ionkov <lucho@ionkov.net> Cc: Dominique Martinet <asmadeus@codewreck.org> Cc: David Howells <dhowells@redhat.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: David Sterba <dsterba@suse.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 3月, 2019 1 次提交
-
-
由 Rasmus Villemoes 提交于
First, the btrfs_debug macros open-code (one possible definition of) DYNAMIC_DEBUG_BRANCH, so they don't benefit from the CONFIG_JUMP_LABEL optimization. Second, a planned change of struct _ddebug (to reduce its size on 64 bit machines) requires that all descriptors in a translation unit use distinct identifiers. Using the new _dynamic_func_call_no_desc helper macro from dynamic_debug.h takes care of both of these. No functional change. Link: http://lkml.kernel.org/r/20190212214150.4807-12-linux@rasmusvillemoes.dkSigned-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: NDavid Sterba <dsterba@suse.com> Acked-by: NJason Baron <jbaron@akamai.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 2月, 2019 1 次提交
-
-
由 Dennis Zhou 提交于
The timer function, zstd_reclaim_timer_fn(), reschedules itself under certain conditions. When cleaning up, take the lock and remove all workspaces. This prevents the timer from rearming itself. Lastly, switch to del_timer_sync() to ensure that the timer function can't trigger as we're unloading. Signed-off-by: NDennis Zhou <dennis@kernel.org> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 27 2月, 2019 5 次提交
-
-
由 David Sterba 提交于
The allocation happens with GFP_KERNEL after a transaction has been started, this can potentially cause deadlock if reclaim tries to get the memory by flushing filesystem data. The fs_info::qgroup_ulist is not used during transaction start when quotas are not enabled. The status bit BTRFS_FS_QUOTA_ENABLED is set later in btrfs_quota_enable so it's safe to move it before the transaction start. Reviewed-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
Previously we only updated the drop_progress key if we were in the DROP_REFERENCE stage of snapshot deletion. This is because the UPDATE_BACKREF stage checks the flags of the blocks it's converting to FULL_BACKREF, so if we go over a block we processed before it doesn't matter, we just don't do anything. The problem is in do_walk_down() we will go ahead and drop the roots reference to any blocks that we know we won't need to walk into. Given subvolume A and snapshot B. The root of B points to all of the nodes that belong to A, so all of those nodes have a refcnt > 1. If B did not modify those blocks it'll hit this condition in do_walk_down if (!wc->update_ref || generation <= root->root_key.offset) goto skip; and in "goto skip" we simply do a btrfs_free_extent() for that bytenr that we point at. Now assume we modified some data in B, and then took a snapshot of B and call it C. C points to all the nodes in B, making every node the root of B points to have a refcnt > 1. This assumes the root level is 2 or higher. We delete snapshot B, which does the above work in do_walk_down, free'ing our ref for nodes we share with A that we didn't modify. Now we hit a node we _did_ modify, thus we own. We need to walk down into this node and we set wc->stage == UPDATE_BACKREF. We walk down to level 0 which we also own because we modified data. We can't walk any further down and thus now need to walk up and start the next part of the deletion. Now walk_up_proc is supposed to put us back into DROP_REFERENCE, but there's an exception to this if (level < wc->shared_level) goto out; we are at level == 0, and our shared_level == 1. We skip out of this one and go up to level 1. Since path->slots[1] < nritems we path->slots[1]++ and break out of walk_up_tree to stop our transaction and loop back around. Now in btrfs_drop_snapshot we have this snippet if (wc->stage == DROP_REFERENCE) { level = wc->level; btrfs_node_key(path->nodes[level], &root_item->drop_progress, path->slots[level]); root_item->drop_level = level; } our stage == UPDATE_BACKREF still, so we don't update the drop_progress key. This is a problem because we would have done btrfs_free_extent() for the nodes leading up to our current position. If we crash or unmount here and go to remount we'll start over where we were before and try to free our ref for blocks we've already freed, and thus abort() out. Fix this by keeping track of the last place we dropped a reference for our block in do_walk_down. Then if wc->stage == UPDATE_BACKREF we know we'll start over from a place we meant to, and otherwise things continue to work as they did before. I have a complicated reproducer for this problem, without this patch we'll fail to fsck the fs when replaying the log writes log. With this patch we can replay the whole log without any fsck or mount failures. The steps to reproduce this easily are sort of tricky, I had to add a couple of debug patches to the kernel in order to make it easy, basically I just needed to make sure we did actually commit the transaction every time we finished a walk_down_tree/walk_up_tree combo. The reproducer: 1) Creates a base subvolume. 2) Creates 100k files in the subvolume. 3) Snapshots the base subvolume (snap1). 4) Touches files 5000-6000 in snap1. 5) Snapshots snap1 (snap2). 6) Deletes snap1. I do this with dm-log-writes, and then replay to every FUA in the log and fsck the fs. Reviewed-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NJosef Bacik <josef@toxicpanda.com> [ copy reproducer steps ] Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
There's a bug in snapshot deletion where we won't update the drop_progress key if we're in the UPDATE_BACKREF stage. This is a problem because we could drop refs for blocks we know don't belong to ours. If we crash or umount at the right time we could experience messages such as the following when snapshot deletion resumes BTRFS error (device dm-3): unable to find ref byte nr 66797568 parent 0 root 258 owner 1 offset 0 ------------[ cut here ]------------ WARNING: CPU: 3 PID: 16052 at fs/btrfs/extent-tree.c:7108 __btrfs_free_extent.isra.78+0x62c/0xb30 [btrfs] CPU: 3 PID: 16052 Comm: umount Tainted: G W OE 5.0.0-rc4+ #147 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./890FX Deluxe5, BIOS P1.40 05/03/2011 RIP: 0010:__btrfs_free_extent.isra.78+0x62c/0xb30 [btrfs] RSP: 0018:ffffc90005cd7b18 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff88842fade680 RSI: ffff88842fad6b18 RDI: ffff88842fad6b18 RBP: ffffc90005cd7bc8 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000001 R11: ffffffff822696b8 R12: 0000000003fb4000 R13: 0000000000000001 R14: 0000000000000102 R15: ffff88819c9d67e0 FS: 00007f08bb138fc0(0000) GS:ffff88842fac0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8f5d861ea0 CR3: 00000003e99fe000 CR4: 00000000000006e0 Call Trace: ? _raw_spin_unlock+0x27/0x40 ? btrfs_merge_delayed_refs+0x356/0x3e0 [btrfs] __btrfs_run_delayed_refs+0x75a/0x13c0 [btrfs] ? join_transaction+0x2b/0x460 [btrfs] btrfs_run_delayed_refs+0xf3/0x1c0 [btrfs] btrfs_commit_transaction+0x52/0xa50 [btrfs] ? start_transaction+0xa6/0x510 [btrfs] btrfs_sync_fs+0x79/0x1c0 [btrfs] sync_filesystem+0x70/0x90 generic_shutdown_super+0x27/0x120 kill_anon_super+0x12/0x30 btrfs_kill_super+0x16/0xa0 [btrfs] deactivate_locked_super+0x43/0x70 deactivate_super+0x40/0x60 cleanup_mnt+0x3f/0x80 __cleanup_mnt+0x12/0x20 task_work_run+0x8b/0xc0 exit_to_usermode_loop+0xce/0xd0 do_syscall_64+0x20b/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe To fix this simply mark dead roots we read from disk as DEAD and then set the walk_control->restarted flag so we know we have a restarted deletion. From here whenever we try to drop refs for blocks we check to verify our ref is set on them, and if it is not we skip it. Once we find a ref that is set we unset walk_control->restarted since the tree should be in a normal state from then on, and any problems we run into from there are different issues. I tested this with an existing broken fs and my reproducer that creates a broken fs and it fixed both file systems. Reviewed-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Filipe Manana 提交于
Reflinking (clone/dedupe) and rename are operations that operate on two inodes and therefore need to lock them in the same order to avoid ABBA deadlocks. It happens that Btrfs' reflink implementation always locked them in a different order from VFS's lock_two_nondirectories() helper, which is used by the rename code in VFS, resulting in ABBA type deadlocks. Btrfs' locking order: static void btrfs_double_inode_lock(struct inode *inode1, struct inode *inode2) { if (inode1 < inode2) swap(inode1, inode2); inode_lock_nested(inode1, I_MUTEX_PARENT); inode_lock_nested(inode2, I_MUTEX_CHILD); } VFS's locking order: void lock_two_nondirectories(struct inode *inode1, struct inode *inode2) { if (inode1 > inode2) swap(inode1, inode2); if (inode1 && !S_ISDIR(inode1->i_mode)) inode_lock(inode1); if (inode2 && !S_ISDIR(inode2->i_mode) && inode2 != inode1) inode_lock_nested(inode2, I_MUTEX_NONDIR2); } Fix this by killing the btrfs helper function that does the double inode locking and replace it with VFS's helper lock_two_nondirectories(). Reported-by: NZygo Blaxell <ce3g8jdj@umail.furryterror.org> Fixes: 416161db ("btrfs: offline dedupe") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Filipe Manana 提交于
In the past we had data corruption when reading compressed extents that are shared within the same file and they are consecutive, this got fixed by commit 005efedf ("Btrfs: fix read corruption of compressed and shared extents") and by commit 808f80b4 ("Btrfs: update fix for read corruption of compressed and shared extents"). However there was a case that was missing in those fixes, which is when the shared and compressed extents are referenced with a non-zero offset. The following shell script creates a reproducer for this issue: #!/bin/bash mkfs.btrfs -f /dev/sdc &> /dev/null mount -o compress /dev/sdc /mnt/sdc # Create a file with 3 consecutive compressed extents, each has an # uncompressed size of 128Kb and a compressed size of 4Kb. for ((i = 1; i <= 3; i++)); do head -c 4096 /dev/zero for ((j = 1; j <= 31; j++)); do head -c 4096 /dev/zero | tr '\0' "\377" done done > /mnt/sdc/foobar sync echo "Digest after file creation: $(md5sum /mnt/sdc/foobar)" # Clone the first extent into offsets 128K and 256K. xfs_io -c "reflink /mnt/sdc/foobar 0 128K 128K" /mnt/sdc/foobar xfs_io -c "reflink /mnt/sdc/foobar 0 256K 128K" /mnt/sdc/foobar sync echo "Digest after cloning: $(md5sum /mnt/sdc/foobar)" # Punch holes into the regions that are already full of zeroes. xfs_io -c "fpunch 0 4K" /mnt/sdc/foobar xfs_io -c "fpunch 128K 4K" /mnt/sdc/foobar xfs_io -c "fpunch 256K 4K" /mnt/sdc/foobar sync echo "Digest after hole punching: $(md5sum /mnt/sdc/foobar)" echo "Dropping page cache..." sysctl -q vm.drop_caches=1 echo "Digest after hole punching: $(md5sum /mnt/sdc/foobar)" umount /dev/sdc When running the script we get the following output: Digest after file creation: 5a0888d80d7ab1fd31c229f83a3bbcc8 /mnt/sdc/foobar linked 131072/131072 bytes at offset 131072 128 KiB, 1 ops; 0.0033 sec (36.960 MiB/sec and 295.6830 ops/sec) linked 131072/131072 bytes at offset 262144 128 KiB, 1 ops; 0.0015 sec (78.567 MiB/sec and 628.5355 ops/sec) Digest after cloning: 5a0888d80d7ab1fd31c229f83a3bbcc8 /mnt/sdc/foobar Digest after hole punching: 5a0888d80d7ab1fd31c229f83a3bbcc8 /mnt/sdc/foobar Dropping page cache... Digest after hole punching: fba694ae8664ed0c2e9ff8937e7f1484 /mnt/sdc/foobar This happens because after reading all the pages of the extent in the range from 128K to 256K for example, we read the hole at offset 256K and then when reading the page at offset 260K we don't submit the existing bio, which is responsible for filling all the page in the range 128K to 256K only, therefore adding the pages from range 260K to 384K to the existing bio and submitting it after iterating over the entire range. Once the bio completes, the uncompressed data fills only the pages in the range 128K to 256K because there's no more data read from disk, leaving the pages in the range 260K to 384K unfilled. It is just a slightly different variant of what was solved by commit 005efedf ("Btrfs: fix read corruption of compressed and shared extents"). Fix this by forcing a bio submit, during readpages(), whenever we find a compressed extent map for a page that is different from the extent map for the previous page or has a different starting offset (in case it's the same compressed extent), instead of the extent map's original start offset. A test case for fstests follows soon. Reported-by: NZygo Blaxell <ce3g8jdj@umail.furryterror.org> Fixes: 808f80b4 ("Btrfs: update fix for read corruption of compressed and shared extents") Fixes: 005efedf ("Btrfs: fix read corruption of compressed and shared extents") Cc: stable@vger.kernel.org # 4.3+ Tested-by: NZygo Blaxell <ce3g8jdj@umail.furryterror.org> Signed-off-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 25 2月, 2019 21 次提交
-
-
由 YueHaibing 提交于
There is a messy cast here: min_t(int, len, (int)sizeof(*item))); min_t() should normally cast to unsigned. It's not possible for "len" to be negative, but if it were then we definitely wouldn't want to pass negatives to read_extent_buffer(). Also there is an extra cast. This patch shouldn't affect runtime, it's just a clean up. Reviewed-by: NDan Carpenter <dan.carpenter@oracle.com> Reviewed-by: NQu Wenruo <wqu@suse.com> Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Filipe Manana 提交于
At ctree.c:key_search(), the assertion that verifies the first key on a child extent buffer corresponds to the key at a specific slot in the parent has a disadvantage: we effectively hit a BUG_ON() which requires rebooting the machine later. It also does not tell any information about which extent buffer is affected, from which root, the expected and found keys, etc. However as of commit 581c1760 ("btrfs: Validate child tree block's level and first key"), that assertion is not needed since at the time we read an extent buffer from disk we validate that its first key matches the key, at the respective slot, in the parent extent buffer. Therefore just remove the assertion at key_search(). Reviewed-by: NQu Wenruo <wqu@suse.com> Signed-off-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Filipe Manana 提交于
The function map_private_extent_buffer() can return an -EINVAL error, and it is called by generic_bin_search() which will return back the error. The btrfs_bin_search() function in turn calls generic_bin_search() and the key_search() function calls btrfs_bin_search(), so both can return the -EINVAL error coming from the map_private_extent_buffer() function. Some callers of these functions were ignoring that these functions can return an error, so fix them to deal with error return values. Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NFilipe Manana <fdmanana@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Dan Carpenter 提交于
We should drop the lock on this error path. This has been found by a static tool. The lock needs to be released, it's there to protect access to the dev_replace members and is not supposed to be left locked. The value of state that's being switched would need to be artifically changed to an invalid value so the default: branch is taken. Fixes: d189dd70 ("btrfs: fix use-after-free due to race between replace start and cancel") CC: stable@vger.kernel.org # 5.0+ Reviewed-by: NAnand Jain <anand.jain@oracle.com> Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Johannes Thumshirn 提交于
We recently had a customer issue with a corrupted filesystem. When trying to mount this image btrfs panicked with a division by zero in calc_stripe_length(). The corrupt chunk had a 'num_stripes' value of 1. calc_stripe_length() takes this value and divides it by the number of copies the RAID profile is expected to have to calculate the amount of data stripes. As a DUP profile is expected to have 2 copies this division resulted in 1/2 = 0. Later then the 'data_stripes' variable is used as a divisor in the stripe length calculation which results in a division by 0 and thus a kernel panic. When encountering a filesystem with a DUP block group and a 'num_stripes' value unequal to 2, refuse mounting as the image is corrupted and will lead to unexpected behaviour. Code inspection showed a RAID1 block group has the same issues. Fixes: e06cd3dd ("Btrfs: add validadtion checks for chunk loading") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: NQu Wenruo <wqu@suse.com> Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Dan Robertson 提交于
The scrub_ctx csum_list member must be initialized before scrub_free_ctx is called. If the csum_list is not initialized beforehand, the list_empty call in scrub_free_csums will result in a null deref if the allocation fails in the for loop. Fixes: a2de733c ("btrfs: scrub") CC: stable@vger.kernel.org # 3.0+ Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NDan Robertson <dan@dlrobertson.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Filipe Manana 提交于
Comparing the content of the pages in the range to deduplicate is now done in generic_remap_checks called by the generic helper generic_remap_file_range_prep(), which takes care of ensuring we do not compare/deduplicate undefined data beyond a file's EOF (range from EOF to the next block boundary). So remove these checks which are now redundant. Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Filipe Manana 提交于
After a succession of renames operations of different files and unlinking one of them, if we fsync one of the renamed files we can end up with a log that will either fail to replay at mount time or result in a filesystem that is in an inconsistent state. One example scenario: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ mkdir /mnt/testdir $ touch /mnt/testdir/fname1 $ touch /mnt/testdir/fname2 $ sync $ mv /mnt/testdir/fname1 /mnt/testdir/fname3 $ rm -f /mnt/testdir/fname2 $ ln /mnt/testdir/fname3 /mnt/testdir/fname2 $ touch /mnt/testdir/fname1 $ xfs_io -c "fsync" /mnt/testdir/fname1 <power failure> $ mount /dev/sdb /mnt $ umount /mnt $ btrfs check /dev/sdb [1/7] checking root items [2/7] checking extents [3/7] checking free space cache [4/7] checking fs roots root 5 inode 259 errors 2, no orphan item ERROR: errors found in fs roots Opening filesystem to check... Checking filesystem on /dev/sdc UUID: 20e4abb8-5a19-4492-8bb4-6084125c2d0d found 393216 bytes used, error(s) found total csum bytes: 0 total tree bytes: 131072 total fs tree bytes: 32768 total extent tree bytes: 16384 btree space waste bytes: 122986 file data blocks allocated: 262144 referenced 262144 On a kernel without the first patch in this series, titled "[PATCH] Btrfs: fix fsync after succession of renames of different files", we get instead an error when mounting the filesystem due to failure of replaying the log: $ mount /dev/sdb /mnt mount: mount /dev/sdb on /mnt failed: File exists Fix this by logging the parent directory of an inode whenever we find an inode that no longer exists (was unlinked in the current transaction), during the procedure which finds inodes that have old names that collide with new names of other inodes. A test case for fstests follows soon. Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Filipe Manana 提交于
After a succession of rename operations of different files and fsyncing one of them, such that each file gets a new name that corresponds to an old name of another file, we can end up with a log that will cause a failure when attempted to replay at mount time (an EEXIST error). We currently have correct behaviour when such succession of renames involves only two files, but if there are more files involved, we end up not logging all the inodes that are needed, therefore resulting in a failure when attempting to replay the log. Example: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ mkdir /mnt/testdir $ touch /mnt/testdir/fname1 $ touch /mnt/testdir/fname2 $ sync $ mv /mnt/testdir/fname1 /mnt/testdir/fname3 $ mv /mnt/testdir/fname2 /mnt/testdir/fname4 $ ln /mnt/testdir/fname3 /mnt/testdir/fname2 $ touch /mnt/testdir/fname1 $ xfs_io -c "fsync" /mnt/testdir/fname1 <power failure> $ mount /dev/sdb /mnt mount: mount /dev/sdb on /mnt failed: File exists So fix this by checking all inode dependencies when logging an inode. That is, if one logged inode A has a new name that matches the old name of some other inode B, check if inode B has a new name that matches the old name of some other inode C, and so on. This fix is implemented not by doing any recursive function calls but by using an iterative method using a linked list that is used in a first-in-first-out fashion. A test case for fstests follows soon. Signed-off-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
Qgroups will do the old roots lookup at delayed ref time, which could be while walking down the extent root while running a delayed ref. This should be fine, except we specifically lock eb's in the backref walking code irrespective of path->skip_locking, which deadlocks the system. Fix up the backref code to honor path->skip_locking, nobody will be modifying the commit_root when we're searching so it's completely safe to do. This happens since fb235dc0 ("btrfs: qgroup: Move half of the qgroup accounting time out of commit trans"), kernel may lockup with quota enabled. There is one backref trace triggered by snapshot dropping along with write operation in the source subvolume. The example can be reliably reproduced: btrfs-cleaner D 0 4062 2 0x80000000 Call Trace: schedule+0x32/0x90 btrfs_tree_read_lock+0x93/0x130 [btrfs] find_parent_nodes+0x29b/0x1170 [btrfs] btrfs_find_all_roots_safe+0xa8/0x120 [btrfs] btrfs_find_all_roots+0x57/0x70 [btrfs] btrfs_qgroup_trace_extent_post+0x37/0x70 [btrfs] btrfs_qgroup_trace_leaf_items+0x10b/0x140 [btrfs] btrfs_qgroup_trace_subtree+0xc8/0xe0 [btrfs] do_walk_down+0x541/0x5e3 [btrfs] walk_down_tree+0xab/0xe7 [btrfs] btrfs_drop_snapshot+0x356/0x71a [btrfs] btrfs_clean_one_deleted_snapshot+0xb8/0xf0 [btrfs] cleaner_kthread+0x12b/0x160 [btrfs] kthread+0x112/0x130 ret_from_fork+0x27/0x50 When dropping snapshots with qgroup enabled, we will trigger backref walk. However such backref walk at that timing is pretty dangerous, as if one of the parent nodes get WRITE locked by other thread, we could cause a dead lock. For example: FS 260 FS 261 (Dropped) node A node B / \ / \ node C node D node E / \ / \ / \ leaf F|leaf G|leaf H|leaf I|leaf J|leaf K The lock sequence would be: Thread A (cleaner) | Thread B (other writer) ----------------------------------------------------------------------- write_lock(B) | write_lock(D) | ^^^ called by walk_down_tree() | | write_lock(A) | write_lock(D) << Stall read_lock(H) << for backref walk | read_lock(D) << lock owner is | the same thread A | so read lock is OK | read_lock(A) << Stall | So thread A hold write lock D, and needs read lock A to unlock. While thread B holds write lock A, while needs lock D to unlock. This will cause a deadlock. This is not only limited to snapshot dropping case. As the backref walk, even only happens on commit trees, is breaking the normal top-down locking order, makes it deadlock prone. Fixes: fb235dc0 ("btrfs: qgroup: Move half of the qgroup accounting time out of commit trans") CC: stable@vger.kernel.org # 4.14+ Reported-and-tested-by: NDavid Sterba <dsterba@suse.com> Reported-by: NFilipe Manana <fdmanana@suse.com> Reviewed-by: NQu Wenruo <wqu@suse.com> Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NFilipe Manana <fdmanana@suse.com> [ rebase to latest branch and fix lock assert bug in btrfs/007 ] Signed-off-by: NQu Wenruo <wqu@suse.com> [ copy logs and deadlock analysis from Qu's patch ] Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Qu Wenruo 提交于
[BUG] Btrfs qgroup will still hit EDQUOT under the following case: $ dev=/dev/test/test $ mnt=/mnt/btrfs $ umount $mnt &> /dev/null $ umount $dev &> /dev/null $ mkfs.btrfs -f $dev $ mount $dev $mnt -o nospace_cache $ btrfs subv create $mnt/subv $ btrfs quota enable $mnt $ btrfs quota rescan -w $mnt $ btrfs qgroup limit -e 1G $mnt/subv $ fallocate -l 900M $mnt/subv/padding $ sync $ rm $mnt/subv/padding # Hit EDQUOT $ xfs_io -f -c "pwrite 0 512M" $mnt/subv/real_file [CAUSE] Since commit a514d638 ("btrfs: qgroup: Commit transaction in advance to reduce early EDQUOT"), btrfs is not forced to commit transaction to reclaim more quota space. Instead, we just check pertrans metadata reservation against some threshold and try to do asynchronously transaction commit. However in above case, the pertrans metadata reservation is pretty small thus it will never trigger asynchronous transaction commit. [FIX] Instead of only accounting pertrans metadata reservation, we calculate how much free space we have, and if there isn't much free space left, commit transaction asynchronously to try to free some space. This may slow down the fs when we have less than 32M free qgroup space, but should reduce a lot of false EDQUOT, so the cost should be acceptable. Signed-off-by: NQu Wenruo <wqu@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Qu Wenruo 提交于
btrfs: qgroup: Move reserved data accounting from btrfs_delayed_ref_head to btrfs_qgroup_extent_record [BUG] Btrfs/139 will fail with a high probability if the testing machine (VM) has only 2G RAM. Resulting the final write success while it should fail due to EDQUOT, and the fs will have quota exceeding the limit by 16K. The simplified reproducer will be: (needs a 2G ram VM) $ mkfs.btrfs -f $dev $ mount $dev $mnt $ btrfs subv create $mnt/subv $ btrfs quota enable $mnt $ btrfs quota rescan -w $mnt $ btrfs qgroup limit -e 1G $mnt/subv $ for i in $(seq -w 1 8); do xfs_io -f -c "pwrite 0 128M" $mnt/subv/file_$i > /dev/null echo "file $i written" > /dev/kmsg done $ sync $ btrfs qgroup show -pcre --raw $mnt The last pwrite will not trigger EDQUOT and final 'qgroup show' will show something like: qgroupid rfer excl max_rfer max_excl parent child -------- ---- ---- -------- -------- ------ ----- 0/5 16384 16384 none none --- --- 0/256 1073758208 1073758208 none 1073741824 --- --- And 1073758208 is larger than > 1073741824. [CAUSE] It's a bug in btrfs qgroup data reserved space management. For quota limit, we must ensure that: reserved (data + metadata) + rfer/excl <= limit Since rfer/excl is only updated at transaction commmit time, reserved space needs to be taken special care. One important part of reserved space is data, and for a new data extent written to disk, we still need to take the reserved space until rfer/excl numbers get updated. Originally when an ordered extent finishes, we migrate the reserved qgroup data space from extent_io tree to delayed ref head of the data extent, expecting delayed ref will only be cleaned up at commit transaction time. However for small RAM machine, due to memory pressure dirty pages can be flushed back to disk without committing a transaction. The related events will be something like: file 1 written btrfs_finish_ordered_io: ino=258 ordered offset=0 len=54947840 btrfs_finish_ordered_io: ino=258 ordered offset=54947840 len=5636096 btrfs_finish_ordered_io: ino=258 ordered offset=61153280 len=57344 btrfs_finish_ordered_io: ino=258 ordered offset=61210624 len=8192 btrfs_finish_ordered_io: ino=258 ordered offset=60583936 len=569344 cleanup_ref_head: num_bytes=54947840 cleanup_ref_head: num_bytes=5636096 cleanup_ref_head: num_bytes=569344 cleanup_ref_head: num_bytes=57344 cleanup_ref_head: num_bytes=8192 ^^^^^^^^^^^^^^^^ This will free qgroup data reserved space file 2 written ... file 8 written cleanup_ref_head: num_bytes=8192 ... btrfs_commit_transaction <<< the only transaction committed during the test When file 2 is written, we have already freed 128M reserved qgroup data space for ino 258. Thus later write won't trigger EDQUOT. This allows us to write more data beyond qgroup limit. In my 2G ram VM, it could reach about 1.2G before hitting EDQUOT. [FIX] By moving reserved qgroup data space from btrfs_delayed_ref_head to btrfs_qgroup_extent_record, we can ensure that reserved qgroup data space won't be freed half way before commit transaction, thus fix the problem. Fixes: f64d5ca8 ("btrfs: delayed_ref: Add new function to record reserved space into delayed ref") Signed-off-by: NQu Wenruo <wqu@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
The member btrfs_fs_info::scrub_nocow_workers is unused since the nocow optimization was removed from scrub in 9bebe665 ("btrfs: scrub: Remove unused copy_nocow_pages and its callchain"). Reviewed-by: NAnand Jain <anand.jain@oracle.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
The scrub worker pointers are not NULL iff the scrub is running, so reset them back once the last reference is dropped. Add assertions to the initial phase of scrub to verify that. Reviewed-by: NAnand Jain <anand.jain@oracle.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Anand Jain 提交于
Use the refcount_t for fs_info::scrub_workers_refcnt instead of int so we get the extra checks. All reference changes are still done under scrub_lock. Signed-off-by: NAnand Jain <anand.jain@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Anand Jain 提交于
scrub_workers_refcnt is protected by scrub_lock, add lockdep_assert_held() in scrub_workers_get(). Signed-off-by: NAnand Jain <anand.jain@oracle.com> Suggested-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Anand Jain 提交于
This fixes a longstanding lockdep warning triggered by fstests/btrfs/011. Circular locking dependency check reports warning[1], that's because the btrfs_scrub_dev() calls the stack #0 below with, the fs_info::scrub_lock held. The test case leading to this warning: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /btrfs $ btrfs scrub start -B /btrfs In fact we have fs_info::scrub_workers_refcnt to track if the init and destroy of the scrub workers are needed. So once we have incremented and decremented the fs_info::scrub_workers_refcnt value in the thread, its ok to drop the scrub_lock, and then actually do the btrfs_destroy_workqueue() part. So this patch drops the scrub_lock before calling btrfs_destroy_workqueue(). [359.258534] ====================================================== [359.260305] WARNING: possible circular locking dependency detected [359.261938] 5.0.0-rc6-default #461 Not tainted [359.263135] ------------------------------------------------------ [359.264672] btrfs/20975 is trying to acquire lock: [359.265927] 00000000d4d32bea ((wq_completion)"%s-%s""btrfs", name){+.+.}, at: flush_workqueue+0x87/0x540 [359.268416] [359.268416] but task is already holding lock: [359.270061] 0000000053ea26a6 (&fs_info->scrub_lock){+.+.}, at: btrfs_scrub_dev+0x322/0x590 [btrfs] [359.272418] [359.272418] which lock already depends on the new lock. [359.272418] [359.274692] [359.274692] the existing dependency chain (in reverse order) is: [359.276671] [359.276671] -> #3 (&fs_info->scrub_lock){+.+.}: [359.278187] __mutex_lock+0x86/0x9c0 [359.279086] btrfs_scrub_pause+0x31/0x100 [btrfs] [359.280421] btrfs_commit_transaction+0x1e4/0x9e0 [btrfs] [359.281931] close_ctree+0x30b/0x350 [btrfs] [359.283208] generic_shutdown_super+0x64/0x100 [359.284516] kill_anon_super+0x14/0x30 [359.285658] btrfs_kill_super+0x12/0xa0 [btrfs] [359.286964] deactivate_locked_super+0x29/0x60 [359.288242] cleanup_mnt+0x3b/0x70 [359.289310] task_work_run+0x98/0xc0 [359.290428] exit_to_usermode_loop+0x83/0x90 [359.291445] do_syscall_64+0x15b/0x180 [359.292598] entry_SYSCALL_64_after_hwframe+0x49/0xbe [359.294011] [359.294011] -> #2 (sb_internal#2){.+.+}: [359.295432] __sb_start_write+0x113/0x1d0 [359.296394] start_transaction+0x369/0x500 [btrfs] [359.297471] btrfs_finish_ordered_io+0x2aa/0x7c0 [btrfs] [359.298629] normal_work_helper+0xcd/0x530 [btrfs] [359.299698] process_one_work+0x246/0x610 [359.300898] worker_thread+0x3c/0x390 [359.302020] kthread+0x116/0x130 [359.303053] ret_from_fork+0x24/0x30 [359.304152] [359.304152] -> #1 ((work_completion)(&work->normal_work)){+.+.}: [359.306100] process_one_work+0x21f/0x610 [359.307302] worker_thread+0x3c/0x390 [359.308465] kthread+0x116/0x130 [359.309357] ret_from_fork+0x24/0x30 [359.310229] [359.310229] -> #0 ((wq_completion)"%s-%s""btrfs", name){+.+.}: [359.311812] lock_acquire+0x90/0x180 [359.312929] flush_workqueue+0xaa/0x540 [359.313845] drain_workqueue+0xa1/0x180 [359.314761] destroy_workqueue+0x17/0x240 [359.315754] btrfs_destroy_workqueue+0x57/0x200 [btrfs] [359.317245] scrub_workers_put+0x2c/0x60 [btrfs] [359.318585] btrfs_scrub_dev+0x336/0x590 [btrfs] [359.319944] btrfs_dev_replace_by_ioctl.cold.19+0x179/0x1bb [btrfs] [359.321622] btrfs_ioctl+0x28a4/0x2e40 [btrfs] [359.322908] do_vfs_ioctl+0xa2/0x6d0 [359.324021] ksys_ioctl+0x3a/0x70 [359.325066] __x64_sys_ioctl+0x16/0x20 [359.326236] do_syscall_64+0x54/0x180 [359.327379] entry_SYSCALL_64_after_hwframe+0x49/0xbe [359.328772] [359.328772] other info that might help us debug this: [359.328772] [359.330990] Chain exists of: [359.330990] (wq_completion)"%s-%s""btrfs", name --> sb_internal#2 --> &fs_info->scrub_lock [359.330990] [359.334376] Possible unsafe locking scenario: [359.334376] [359.336020] CPU0 CPU1 [359.337070] ---- ---- [359.337821] lock(&fs_info->scrub_lock); [359.338506] lock(sb_internal#2); [359.339506] lock(&fs_info->scrub_lock); [359.341461] lock((wq_completion)"%s-%s""btrfs", name); [359.342437] [359.342437] *** DEADLOCK *** [359.342437] [359.343745] 1 lock held by btrfs/20975: [359.344788] #0: 0000000053ea26a6 (&fs_info->scrub_lock){+.+.}, at: btrfs_scrub_dev+0x322/0x590 [btrfs] [359.346778] [359.346778] stack backtrace: [359.347897] CPU: 0 PID: 20975 Comm: btrfs Not tainted 5.0.0-rc6-default #461 [359.348983] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014 [359.350501] Call Trace: [359.350931] dump_stack+0x67/0x90 [359.351676] print_circular_bug.isra.37.cold.56+0x15c/0x195 [359.353569] check_prev_add.constprop.44+0x4f9/0x750 [359.354849] ? check_prev_add.constprop.44+0x286/0x750 [359.356505] __lock_acquire+0xb84/0xf10 [359.357505] lock_acquire+0x90/0x180 [359.358271] ? flush_workqueue+0x87/0x540 [359.359098] flush_workqueue+0xaa/0x540 [359.359912] ? flush_workqueue+0x87/0x540 [359.360740] ? drain_workqueue+0x1e/0x180 [359.361565] ? drain_workqueue+0xa1/0x180 [359.362391] drain_workqueue+0xa1/0x180 [359.363193] destroy_workqueue+0x17/0x240 [359.364539] btrfs_destroy_workqueue+0x57/0x200 [btrfs] [359.365673] scrub_workers_put+0x2c/0x60 [btrfs] [359.366618] btrfs_scrub_dev+0x336/0x590 [btrfs] [359.367594] ? start_transaction+0xa1/0x500 [btrfs] [359.368679] btrfs_dev_replace_by_ioctl.cold.19+0x179/0x1bb [btrfs] [359.369545] btrfs_ioctl+0x28a4/0x2e40 [btrfs] [359.370186] ? __lock_acquire+0x263/0xf10 [359.370777] ? kvm_clock_read+0x14/0x30 [359.371392] ? kvm_sched_clock_read+0x5/0x10 [359.372248] ? sched_clock+0x5/0x10 [359.372786] ? sched_clock_cpu+0xc/0xc0 [359.373662] ? do_vfs_ioctl+0xa2/0x6d0 [359.374552] do_vfs_ioctl+0xa2/0x6d0 [359.375378] ? do_sigaction+0xff/0x250 [359.376233] ksys_ioctl+0x3a/0x70 [359.376954] __x64_sys_ioctl+0x16/0x20 [359.377772] do_syscall_64+0x54/0x180 [359.378841] entry_SYSCALL_64_after_hwframe+0x49/0xbe [359.380422] RIP: 0033:0x7f5429296a97 Backporting to older kernels: scrub_nocow_workers must be freed the same way as the others. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: NAnand Jain <anand.jain@oracle.com> [ update changelog ] Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Anand Jain 提交于
We have killed volume mutex (commit: dccdb07b btrfs: kill btrfs_fs_info::volume_mutex). This a trival one seems to have escaped. Signed-off-by: NAnand Jain <anand.jain@oracle.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Qu Wenruo 提交于
There is no need to forward declare flush_write_bio(), as it only depends on submit_one_bio(). Both of them are pretty small, just move them to kill the forward declaration. Reviewed-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NQu Wenruo <wqu@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
The variables and function parameters of __etree_search which pertain to prev/next are grossly misnamed. Namely, prev_ret holds the next state and not the previous. Similarly, next_ret actually holds the previous extent state relating to the offset we are interested in. Fix this by renaming the variables as well as switching the arguments order. No functional changes. Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
With the refactoring introduced in 8b62f87b ("Btrfs: reworki outstanding_extents") this flag became unused. Remove it and renumber the following flags accordingly. No functional changes. Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-