Use a variable containing the buffer address instead of the to be
removed integer iterator from bio_for_each_segment_all.
Suggested-by: NMatthew Wilcox <willy@infradead.org>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Acked-by: NColy Li <colyli@suse.de>
Reviewed-by: NMatthew Wilcox <willy@infradead.org>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Commit 95f18c9d ("bcache: avoid potential memleak of list of
journal_replay(s) in the CACHE_SYNC branch of run_cache_set") forgets
to remove the original define of LIST_HEAD(journal), which makes
the change no take effect. This patch removes redundant variable
LIST_HEAD(journal) from run_cache_set(), to make Shenghui's fix
working.

Fixes: 95f18c9d ("bcache: avoid potential memleak of list of journal_replay(s) in the CACHE_SYNC branch of run_cache_set")
Reported-by: NJuha Aatrokoski <juha.aatrokoski@aalto.fi>
Cc: Shenghui Wang <shhuiw@foxmail.com>
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Pull NVMe changes from Christoph.

* 'nvme-5.2' of git://git.infradead.org/nvme:
  nvme: set 0 capacity if namespace block size exceeds PAGE_SIZE
  nvme-rdma: fix typo in struct comment
  nvme-loop: kill timeout handler
  nvme-tcp: rename function to have nvme_tcp prefix
  nvme-rdma: fix a NULL deref when an admin connect times out
  nvme-tcp: fix a NULL deref when an admin connect times out
  nvmet-tcp: don't fail maxr2t greater than 1
  nvmet-file: clamp-down file namespace lba_shift
  nvmet: include <linux/scatterlist.h>
  nvmet: return a specified error it subsys_alloc fails
  nvmet: rename nvme_completion instances from rsp to cqe
  nvmet-rdma: remove p2p_client initialization from fast-path

The trim support in mtip32xx has been "temporarily" disabled for 6
years, which is 3/4 of the time the driver even exists in the tree.

Remove it as it obviously is dead code now.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If our target exposed a namespace with a block size that is greater
than PAGE_SIZE, set 0 capacity on the namespace as we do not support it.

This issue encountered when the nvmet namespace was backed by a tempfile.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

struct nvme_rdma_cm_rej has two different attributes: recfmt and sts.
And sts will have value what this comment wanted to show.
Signed-off-by: NMinwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Firstly it doesn't make sense to handle timeout for loop: 1) for admin
queue, the request is always completed in code path of queuing IO. 2)
for normal IO request, the timeout on these IOs have been handled by
underlying queue already.

Secondly nvme-loop's timeout handler is simply broken, and easy to
cause issue: 1) no any sync/protection between timeout and normal
completion, and now it is driver's responsibility to deal with
that; 2) bad reset implementation, blk_mq_update_nr_hw_queues()
is called after all NSs's queue is stopped(quiesced), and easy
to trigger deadlock.

So kill the timeout handler.
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Reviewd-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

usually nvme_ prefix is for core functions.
While we're cleaning up, remove redundant empty lines
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NMinwoo Im <minwoo.im@samsung.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

If we timeout the admin startup sequence we might not yet have
an I/O tagset allocated which causes the teardown sequence to crash.
Make nvme_tcp_teardown_io_queues safe by not iterating inflight tags
if the tagset wasn't allocated.

Fixes: 4c174e63 ("nvme-rdma: fix timeout handler")
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

If we timeout the admin startup sequence we might not yet have
an I/O tagset allocated which causes the teardown sequence to crash.
Make nvme_tcp_teardown_io_queues safe by not iterating inflight tags
if the tagset wasn't allocated.

Fixes: 39d57757 ("nvme-tcp: fix timeout handler")
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The host may support it, but nothing prevents us from
sending a single r2t at a time like we do anyways.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

When the backing file is a tempfile for example, the inode i_blkbits
can be 1M in size which causes problems for hosts to support as the
disk block size. Instead, expose the minimum between i_blkbits and
12 (4K sector size).
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: N- Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Build breaks:

    drivers/nvme/target/core.c: In function 'nvmet_req_alloc_sgl':
    drivers/nvme/target/core.c:939:12: error: implicit declaration of \
function 'sgl_alloc'; did you mean 'bio_alloc'? \
[-Werror=implicit-function-declaration]
      req->sg = sgl_alloc(req->transfer_len, GFP_KERNEL, &req->sg_cnt);
                ^~~~~~~~~
                bio_alloc
    drivers/nvme/target/core.c:939:10: warning: assignment makes pointer \
from integer without a cast [-Wint-conversion]
      req->sg = sgl_alloc(req->transfer_len, GFP_KERNEL, &req->sg_cnt);
              ^
    drivers/nvme/target/core.c: In function 'nvmet_req_free_sgl':
    drivers/nvme/target/core.c:952:3: error: implicit declaration of \
function 'sgl_free'; did you mean 'ida_free'? [-Werror=implicit-function-declaration]
       sgl_free(req->sg);
       ^~~~~~~~
       ida_free

Cause:

    1. missing include to <linux/scatterlist.h>
    2. SGL_ALLOC needs to be enabled

Therefore adding the missing include, as well as Kconfig dependency.
Signed-off-by: NEnrico Weigelt, metux IT consult <info@metux.net>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NMinwoo Im <minwoo.im@samsung.com>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

nvmet_subsys_alloc() returns its pointer or NULL if it fails.  We can
see three different steps in this function:
  1. memory allocation
  2. argument check
  3. memory allocation for string

But now the callers of this function do not seem to handle case 2 by
returning -ENOMEM only even if it fails with an invalid parameter.

This patch specifies error codes so that caller can pass it to its own
caller.
Signed-off-by: NMinwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>.
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Use NVMe namings for improving code readability.
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by : Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Initialize it during command allocation.

Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Stephen Bates <sbates@raithlin.com>
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NLogan Gunthorpe <logang@deltatee.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

bcache: avoid potential memleak of list of journal_replay(s) in the CACHE_SYNC branch of run_cache_set

In the CACHE_SYNC branch of run_cache_set(), LIST_HEAD(journal) is used
to collect journal_replay(s) and filled by bch_journal_read().

If all goes well, bch_journal_replay() will release the list of
jounal_replay(s) at the end of the branch.

If something goes wrong, code flow will jump to the label "err:" and leave
the list unreleased.

This patch will release the list of journal_replay(s) in the case of
error detected.

v1 -> v2:
* Move the release code to the location after label 'err:' to
  simply the change.
Signed-off-by: NShenghui Wang <shhuiw@foxmail.com>
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Elements of keylist should be accessed before the list is freed.
Move bch_keylist_free() calling after the while loop to avoid wrong
content accessed.
Signed-off-by: NShenghui Wang <shhuiw@foxmail.com>
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

journal replay failed with messages:
Sep 10 19:10:43 ceph kernel: bcache: error on
bb379a64-e44e-4812-b91d-a5599871a3b1: bcache: journal entries
2057493-2057567 missing! (replaying 2057493-20766016), disabling
caching

The reason is in journal_reclaim(), when discard is enabled, we send
discard command and reclaim those journal buckets whose seq is old
than the last_seq_now, but before we write a journal with last_seq_now,
the machine is restarted, so the journal with the last_seq_now is not
written to the journal bucket, and the last_seq_wrote in the newest
journal is old than last_seq_now which we expect to be, so when we doing
replay, journals from last_seq_wrote to last_seq_now are missing.

It's hard to write a journal immediately after journal_reclaim(),
and it harmless if those missed journal are caused by discarding
since those journals are already wrote to btree node. So, if miss
seqs are started from the beginning journal, we treat it as normal,
and only print a message to show the miss journal, and point out
it maybe caused by discarding.

Patch v2 add a judgement condition to ignore the missed journal
only when discard enabled as Coly suggested.

(Coly Li: rebase the patch with other changes in bch_journal_replay())
Signed-off-by: NTang Junhui <tang.junhui.linux@gmail.com>
Tested-by: NDennis Schridde <devurandom@gmx.net>
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch tries to release mutex bch_register_lock early, to give
chance to stop cache set and bcache device early.

This patch also expends time out of stopping all bcache device from
2 seconds to 10 seconds, because stopping writeback rate update worker
may delay for 5 seconds, 2 seconds is not enough.

After this patch applied, stopping bcache devices during system reboot
or shutdown is very hard to be observed any more.
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Add code comments to explain which call back function might be called
for the closure_queue(). This is an effort to make code to be more
understandable for readers.
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Add comments to explain why in register_bcache() blkdev_put() won't
be called in two location. Add comments to explain why blkdev_put()
must be called in register_cache() when cache_alloc() failed.
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch adds return value to register_bdev(). Then if failure happens
inside register_bdev(), its caller register_bcache() may detect and
handle the failure more properly.
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When failure happens inside bch_journal_replay(), calling
cache_set_err_on() and handling the failure in async way is not a good
idea. Because after bch_journal_replay() returns, registering code will
continue to execute following steps, and unregistering code triggered
by cache_set_err_on() is running in same time. First it is unnecessary
to handle failure and unregister cache set in an async way, second there
might be potential race condition to run register and unregister code
for same cache set.

So in this patch, if failure happens in bch_journal_replay(), we don't
call cache_set_err_on(), and just print out the same error message to
kernel message buffer, then return -EIO immediately caller. Then caller
can detect such failure and handle it in synchrnozied way.
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Bcache has several routines to release resources in implicit way, they
are called when the associated kobj released. This patch adds code
comments to notice when and which release callback will be called,
- When dc->disk.kobj released:
  void bch_cached_dev_release(struct kobject *kobj)
- When d->kobj released:
  void bch_flash_dev_release(struct kobject *kobj)
- When c->kobj released:
  void bch_cache_set_release(struct kobject *kobj)
- When ca->kobj released
  void bch_cache_release(struct kobject *kobj)
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently run_cache_set() has no return value, if there is failure in
bch_journal_replay(), the caller of run_cache_set() has no idea about
such failure and just continue to execute following code after
run_cache_set().  The internal failure is triggered inside
bch_journal_replay() and being handled in async way. This behavior is
inefficient, while failure handling inside bch_journal_replay(), cache
register code is still running to start the cache set. Registering and
unregistering code running as same time may introduce some rare race
condition, and make the code to be more hard to be understood.

This patch adds return value to run_cache_set(), and returns -EIO if
bch_journal_rreplay() fails. Then caller of run_cache_set() may detect
such failure and stop registering code flow immedidately inside
register_cache_set().

If journal replay fails, run_cache_set() can report error immediately
to register_cache_set(). This patch makes the failure handling for
bch_journal_replay() be in synchronized way, easier to understand and
debug, and avoid poetential race condition for register-and-unregister
in same time.
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In journal_reclaim() ja->cur_idx of each cache will be update to
reclaim available journal buckets. Variable 'int n' is used to count how
many cache is successfully reclaimed, then n is set to c->journal.key
by SET_KEY_PTRS(). Later in journal_write_unlocked(), a for_each_cache()
loop will write the jset data onto each cache.

The problem is, if all jouranl buckets on each cache is full, the
following code in journal_reclaim(),

529 for_each_cache(ca, c, iter) {
530       struct journal_device *ja = &ca->journal;
531       unsigned int next = (ja->cur_idx + 1) % ca->sb.njournal_buckets;
532
533       /* No space available on this device */
534       if (next == ja->discard_idx)
535               continue;
536
537       ja->cur_idx = next;
538       k->ptr[n++] = MAKE_PTR(0,
539                         bucket_to_sector(c, ca->sb.d[ja->cur_idx]),
540                         ca->sb.nr_this_dev);
541 }
542
543 bkey_init(k);
544 SET_KEY_PTRS(k, n);

If there is no available bucket to reclaim, the if() condition at line
534 will always true, and n remains 0. Then at line 544, SET_KEY_PTRS()
will set KEY_PTRS field of c->journal.key to 0.

Setting KEY_PTRS field of c->journal.key to 0 is wrong. Because in
journal_write_unlocked() the journal data is written in following loop,

649	for (i = 0; i < KEY_PTRS(k); i++) {
650-671		submit journal data to cache device
672	}

If KEY_PTRS field is set to 0 in jouranl_reclaim(), the journal data
won't be written to cache device here. If system crahed or rebooted
before bkeys of the lost journal entries written into btree nodes, data
corruption will be reported during bcache reload after rebooting the
system.

Indeed there is only one cache in a cache set, there is no need to set
KEY_PTRS field in journal_reclaim() at all. But in order to keep the
for_each_cache() logic consistent for now, this patch fixes the above
problem by not setting 0 KEY_PTRS of journal key, if there is no bucket
available to reclaim.
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJens Axboe <axboe@kernel.dk>

'int ret' is defined as a local variable inside macro read_bucket().
Since this macro is called multiple times, and following patches will
use a 'int ret' variable in bch_journal_read(), this patch moves
definition of 'int ret' from macro read_bucket() to range of function
bch_journal_read().
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

There is a race between cache device register and cache set unregister.
For an already registered cache device, register_bcache will call
bch_is_open to iterate through all cachesets and check every cache
there. The race occurs if cache_set_free executes at the same time and
clears the caches right before ca is dereferenced in bch_is_open_cache.
To close the race, let's make sure the clean up work is protected by
the bch_register_lock as well.

This issue can be reproduced as follows,
while true; do echo /dev/XXX> /sys/fs/bcache/register ; done&
while true; do echo 1> /sys/block/XXX/bcache/set/unregister ; done &

and results in the following oops,

[  +0.000053] BUG: unable to handle kernel NULL pointer dereference at 0000000000000998
[  +0.000457] #PF error: [normal kernel read fault]
[  +0.000464] PGD 800000003ca9d067 P4D 800000003ca9d067 PUD 3ca9c067 PMD 0
[  +0.000388] Oops: 0000 [#1] SMP PTI
[  +0.000269] CPU: 1 PID: 3266 Comm: bash Not tainted 5.0.0+ #6
[  +0.000346] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.fc28 04/01/2014
[  +0.000472] RIP: 0010:register_bcache+0x1829/0x1990 [bcache]
[  +0.000344] Code: b0 48 83 e8 50 48 81 fa e0 e1 10 c0 0f 84 a9 00 00 00 48 89 c6 48 89 ca 0f b7 ba 54 04 00 00 4c 8b 82 60 0c 00 00 85 ff 74 2f <49> 3b a8 98 09 00 00 74 4e 44 8d 47 ff 31 ff 49 c1 e0 03 eb 0d
[  +0.000839] RSP: 0018:ffff92ee804cbd88 EFLAGS: 00010202
[  +0.000328] RAX: ffffffffc010e190 RBX: ffff918b5c6b5000 RCX: ffff918b7d8e0000
[  +0.000399] RDX: ffff918b7d8e0000 RSI: ffffffffc010e190 RDI: 0000000000000001
[  +0.000398] RBP: ffff918b7d318340 R08: 0000000000000000 R09: ffffffffb9bd2d7a
[  +0.000385] R10: ffff918b7eb253c0 R11: ffffb95980f51200 R12: ffffffffc010e1a0
[  +0.000411] R13: fffffffffffffff2 R14: 000000000000000b R15: ffff918b7e232620
[  +0.000384] FS:  00007f955bec2740(0000) GS:ffff918b7eb00000(0000) knlGS:0000000000000000
[  +0.000420] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  +0.000801] CR2: 0000000000000998 CR3: 000000003cad6000 CR4: 00000000001406e0
[  +0.000837] Call Trace:
[  +0.000682]  ? _cond_resched+0x10/0x20
[  +0.000691]  ? __kmalloc+0x131/0x1b0
[  +0.000710]  kernfs_fop_write+0xfa/0x170
[  +0.000733]  __vfs_write+0x2e/0x190
[  +0.000688]  ? inode_security+0x10/0x30
[  +0.000698]  ? selinux_file_permission+0xd2/0x120
[  +0.000752]  ? security_file_permission+0x2b/0x100
[  +0.000753]  vfs_write+0xa8/0x1a0
[  +0.000676]  ksys_write+0x4d/0xb0
[  +0.000699]  do_syscall_64+0x3a/0xf0
[  +0.000692]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: NLiang Chen <liangchen.linux@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

There are a few nits in this function.  They could in theory all
be separate patches, but that's probably taking small commits
too far.

1) I added a brief comment saying what it does.

2) I like to declare pointer parameters "const" where possible
   for documentation reasons.

3) It uses bitmap_weight(&rand, BITS_PER_LONG) to compute the Hamming
weight of a 32-bit random number (giving a random integer with
mean 16 and variance 8).  Passing by reference in a 64-bit variable
is silly; just use hweight32().

4) Its helper function fract_exp_two is unnecessarily tangled.
Gcc can optimize the multiply by (1 << x) to a shift, but it can
be written in a much more straightforward way at the cost of one
more bit of internal precision.  Some analysis reveals that this
bit is always available.

This shrinks the object code for fract_exp_two(x, 6) from 23 bytes:

0000000000000000 <foo1>:
   0:   89 f9                   mov    %edi,%ecx
   2:   c1 e9 06                shr    $0x6,%ecx
   5:   b8 01 00 00 00          mov    $0x1,%eax
   a:   d3 e0                   shl    %cl,%eax
   c:   83 e7 3f                and    $0x3f,%edi
   f:   d3 e7                   shl    %cl,%edi
  11:   c1 ef 06                shr    $0x6,%edi
  14:   01 f8                   add    %edi,%eax
  16:   c3                      retq

To 19:

0000000000000017 <foo2>:
  17:   89 f8                   mov    %edi,%eax
  19:   83 e0 3f                and    $0x3f,%eax
  1c:   83 c0 40                add    $0x40,%eax
  1f:   89 f9                   mov    %edi,%ecx
  21:   c1 e9 06                shr    $0x6,%ecx
  24:   d3 e0                   shl    %cl,%eax
  26:   c1 e8 06                shr    $0x6,%eax
  29:   c3                      retq

(Verified with 0 <= frac_bits <= 8, 0 <= x < 16<<frac_bits;
both versions produce the same output.)

5) And finally, the call to bch_get_congested() in check_should_bypass()
is separated from the use of the value by multiple tests which
could moot the need to compute it.  Move the computation down to
where it's needed.  This also saves a local register to hold the
computed value.
Signed-off-by: NGeorge Spelvin <lkml@sdf.org>
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch uses kmemdup_nul to create a NUL-terminated string from
dc->sb.label. This is better than open coding it.

With this, we can move env[2] initialization into env[] array to make
code more elegant.
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

clang has identified a code path in which it thinks a
variable may be unused:

drivers/md/bcache/alloc.c:333:4: error: variable 'bucket' is used uninitialized whenever 'if' condition is false
      [-Werror,-Wsometimes-uninitialized]
                        fifo_pop(&ca->free_inc, bucket);
                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/md/bcache/util.h:219:27: note: expanded from macro 'fifo_pop'
 #define fifo_pop(fifo, i)       fifo_pop_front(fifo, (i))
                                ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/md/bcache/util.h:189:6: note: expanded from macro 'fifo_pop_front'
        if (_r) {                                                       \
            ^~
drivers/md/bcache/alloc.c:343:46: note: uninitialized use occurs here
                        allocator_wait(ca, bch_allocator_push(ca, bucket));
                                                                  ^~~~~~
drivers/md/bcache/alloc.c:287:7: note: expanded from macro 'allocator_wait'
                if (cond)                                               \
                    ^~~~
drivers/md/bcache/alloc.c:333:4: note: remove the 'if' if its condition is always true
                        fifo_pop(&ca->free_inc, bucket);
                        ^
drivers/md/bcache/util.h:219:27: note: expanded from macro 'fifo_pop'
 #define fifo_pop(fifo, i)       fifo_pop_front(fifo, (i))
                                ^
drivers/md/bcache/util.h:189:2: note: expanded from macro 'fifo_pop_front'
        if (_r) {                                                       \
        ^
drivers/md/bcache/alloc.c:331:15: note: initialize the variable 'bucket' to silence this warning
                        long bucket;
                                   ^

This cannot happen in practice because we only enter the loop
if there is at least one element in the list.

Slightly rearranging the code makes this clearer to both the
reader and the compiler, which avoids the warning.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

To get the amount of unused buckets in sysfs_priority_stats, the code
count the buckets which GC_SECTORS_USED is zero. It's correct and should
not be overwritten by the count of buckets which prio is zero.
Signed-off-by: NGuoju Fang <fangguoju@gmail.com>
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The bio from upper layer is considered completed when bio_complete()
returns. In most scenarios bio_complete() is called in search_free(),
but when read miss happens, the bio_compete() is called when backing
device reading completed, while the struct search is still in use until
cache inserting finished.

If someone stops the bcache device just then, the device may be closed
and released, but after cache inserting finished the struct search will
access a freed struct cached_dev.

This patch add the reference of bcache device before bio_complete() when
read miss happens, and put it after the search is not used.
Signed-off-by: NGuoju Fang <fangguoju@gmail.com>
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The refcount has been increased for pages retrieved from non-bvec iov iter
via __bio_iov_iter_get_pages(), so don't need to do that again.

Otherwise, IO pages are leaked easily.

Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Fixes: 7321ecbf ("block: change how we get page references in bio_iov_iter_get_pages")
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

bio_add_page() and __bio_add_page() are capable of adding pages into
bio, and now we have at least two such usages alreay:

	- __bio_iov_bvec_add_pages()
	- nvmet_bdev_execute_rw().

So update comments on these two helpers.

The thing is a bit special for __bio_try_merge_page(), given the caller
needs to know if the new added page is same with the last added page,
then it isn't safe to pass multi-page in case that 'same_page' is true,
so adds warning on potential misuse, and updates comment on
__bio_try_merge_page().

Cc: linux-xfs@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Pull MD fixes from Song.

* 'md-next' of https://github.com/liu-song-6/linux:
  md/raid: raid5 preserve the writeback action after the parity check
  Revert "Don't jump to compute_result state from check_result state"
  md: return -ENODEV if rdev has no mddev assigned
  block: fix use-after-free on gendisk

If the low level driver has no timeout handler, the
/sys/block/<disk>/queue/io_timeout will not be displayed.
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NWeiping Zhang <zhangweiping@didiglobal.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

While we generally allow scatterlists to have offsets larger than page
size for an entry, and other subsystems like the crypto code make use of
that, the block layer isn't quite ready for that.  Flip the switch back
to avoid them for now, and revisit that decision early in a merge window
once the known offenders are fixed.

Fixes: 8a96a0e4 ("block: rewrite blk_bvec_map_sg to avoid a nth_page call")
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Reported-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

__GFP_HIGHMEM is disabled if dax is enabled on brd, however
dax support for brd has been removed since commit (7a862fbb
"brd: remove dax support"), so restore __GFP_HIGHMEM in
brd_insert_page().

Also remove the no longer applicable comments about DAX and highmem.

Cc: stable@vger.kernel.org
Fixes: 7a862fbb ("brd: remove dax support")
Signed-off-by: NHou Tao <houtao1@huawei.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>