- 22 6月, 2005 40 次提交
-
-
由 Takashi Iwai 提交于
Documentation,HDA Codec driver,HDA generic driver,HDA Intel driver - Fix some invalid configurations, typos in the last patch - Make init_verbs chainable, so that different configs can share the same init_verbs - Reorder and clean up the source codes in patch_realtek.c - Add the pin default configuration parser, used commonly in cmedia and realtek patch codes. - Add 'auto' model to ALC880 for auto-configuration from BIOS Use this model as default, and 3-stack as fallback Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Control Midlevel Add const prefix to snd_kcontrol_new_t pointer for better protection. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Codec driver,HDA Intel driver Merged the work of pshou <pshou@realtek.com.tw> for the support of more models with ALC codecs: ALC880 ASUS, Uniwill, FSC1734, generic 6-stack, and ALC260 HP. Tests with the real hardwares are appreciated. The codec patch is cleaned up: The preset configuration of codecs are stored in the table and copied to the spec instance. Added/fixed comments. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Codec driver Allow sub_device=0 in board config check. This means that every device with the given sub vendor ID will match. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Codec driver Clean up and fix ALC-codec support code. The last addition of bound volume is fixed now to handle correctly the bound 'mute switches'. The analog loopback should work better. The init verbs are fixed together with this change. The numbers are replaced with macros for better readability. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Codec driver Feed front signals to all surround channels if no data is given for surround channels. It seems that CLFE works as expected (only center outputs) even if connected from the front line - at least on my test system. If this change causes problems on other system (e.g. only the left channel is transferred to the center channel), please let me know... Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA generic driver Print all AMP IN values when multiple nodes are connected. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Trident driver Disable MPU401 support on SIS7018 since it results in kernel freeze. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Codec driver Fix the analog loopback volumes of ALC codecs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Codec driver Fix the PCM mixer switch for AD1986a (it was a typo). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Codec driver Fixed the handling of amp cache in hda-codec driver. The confliction of cache values with different indices should be fixed now. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jaroslav Kysela 提交于
VIA82xx driver As the original reporter noted, the NO_VRA must be used for loud volumes. Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 James Courtier-Dutton 提交于
CA0106 driver Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>
-
由 Takashi Iwai 提交于
Documentation Added documentation for HDSP MADI driver by Winfried Ritsch. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDSPM driver,PCI drivers,RME9652 driver Added RME Hammerfall DSP MADI driver by Winfried Ritsch. (Moved from alsa-driver tree to mainline.) Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Christoph Schulz 提交于
CS4236+ driver Background: The card/chipset supports an external MIDI interrupt. By default, this interrupt isn't used (because the isapnp mechanism chooses a configuration without an assigned interrupt). If the user wishes to explicitly select an interrupt via the mpu_irq parameter for such a configured device, it doesn't work: The driver always shows: isapnp MPU: port=0x330, irq=-1 (note the 'irq=-1') Problem: The driver only allows to set the irq if pnp_irq_valid returns true for this particular pnp device. This, however, is only true if an interrupt has already been assigned (pnp_valid_irq returns true if the flag IORESOURCE_IRQ is set and IORESOURCE_UNSET is not set). If no interrupt has been assigned so far, IORESOURCE_UNSET is set and pnp_irq_valid returns false, thereby inhibiting the selection of a valid irq. Solution: Don't check for a valid (= already assigned) irq at the point of calling pnp_resource_change. Tested successfully on Linux 2.6.11. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Jaroslav Kysela 提交于
ALSA<-OSS emulation The problem was negative/wrong result (info.bytes) in a specific condition at playback startup. Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Intel8x0 driver Added ac97_quirk for FSC T3010. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jaroslav Kysela 提交于
ALSA<-OSS emulation The problem was negative result (info.bytes) in a specific condition at playback startup. Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
PCM Midlevel Fix semaphore races between PCM drain and other ops. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Intel driver Fixed Oops in the error path from probe function of snd-hda-intel driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Documentation,Memalloc module,RME HDSP driver,RME9652 driver Add the write support to snd-page-alloc proc file for buffer pre-allocation. Removed the pre-allocation codes via module options. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jesper Juhl 提交于
Timer Midlevel,ALSA sequencer,ALSA<-OSS sequencer,Digigram VX core I2C tea6330t,GUS Library,VIA82xx driver,VIA82xx-modem driver CA0106 driver,CS46xx driver,EMU10K1/EMU10K2 driver,YMFPCI driver Digigram VX Pocket driver,Common EMU synth,USB generic driver,USB USX2Y Checking a pointer for NULL before calling kfree() on it is redundant, kfree() deals with NULL pointers just fine. This patch removes such checks from sound/ This patch also makes another, but closely related, change. It avoids casting pointers about to be kfree()'ed. Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 James Courtier-Dutton 提交于
Intel8x0 driver To avoid confusion, the structure members vendor/device were renamed to subvendor/subdevice, because we compare them with PCI subsystem vendor and subsystem device. Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>
-
由 Jaroslav Kysela 提交于
AC97 Codec,ATIIXP driver,VIA82xx driver To avoid confusion, the structure members vendor/device were renamed to subvendor/subdevice, because we compare them with PCI subsystem vendor and subsystem device. Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Jaroslav Kysela 提交于
VIA82xx driver - 0x1071, 0x8399 == VIA_DXS_ENABLE - Umax AB 595T (VIA K8N800A - VT8237) - reporter: Honza Machacek <Hloupy.Honza@centrum.cz> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Sasha Khapyorsky 提交于
ALI5451 driver This patch adds modem support for ali5451. Since it is same pci device all is done in ali5451.c. Signed-off-by: NSasha Khapyorsky <sashak@smlink.com> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Tobias Klauser 提交于
CA0106 driver Use the DMA_32BIT_MASK constant from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by: NTobias Klauser <tklauser@nuerscht.ch> Signed-off-by: NDomen Puncer <domen@coderock.org> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Sasha Khapyorsky 提交于
ATIIXP-modem driver,Intel8x0-modem driver,VIA82xx-modem driver Modem drivers (atiixp-modem, intel8x0m, via82xx-modem) migration for using MC97 generic modem mixer for off-hook operation. Signed-off-by: NSasha Khapyorsky <sashak@smlink.com> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Sasha Khapyorsky 提交于
AC97 Codec Simple MC97 modem mixer with two common controls: Off-hook and CID, and Si3056 MC specific control: Modem Speaker. Signed-off-by: NSasha Khapyorsky <sashak@smlink.com> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 James Courtier-Dutton 提交于
CA0106 driver Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>
-
由 James Courtier-Dutton 提交于
CA0106 driver Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>
-
由 James Courtier-Dutton 提交于
CA0106 driver Notes: This adds a new mixer item to switch between Mic and Line-in. Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>
-
由 James Courtier-Dutton 提交于
CA0106 driver Notes: MIC capture not tested yet. Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>
-
-
由 Jesper Juhl 提交于
This patch removes some unneeded checks of pointers being NULL before calling kfree() on them. kfree() handles NULL pointers just fine, checking first is pointless. Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Due to the use of write-behind, it is possible for md to write a page to the bitmap file that is still completing writeback. This is not allowed. With this patch, we detect those cases and either force a sync write, or back off and try later, as appropriate. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
1/ Must typecast int to (sector_t) before inverting or we might not invert enough bits. 2/ When "bitmap_offset" was added to mdp_superblock_1, we didn't increase the count of words-used (96 to 100). Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
currently, md updates all superblocks (one on each device) in series. It waits for one write to complete before starting the next. This isn't a big problem as superblock updates don't happen that often. However it is neater to do it in parallel, and if the drives in the array have gone to "sleep" after a period of idleness, then waking them is parallel is faster (and someone else should be worrying about power drain). Futher, we will need parallel superblock updates for a future patch which keeps the intent-logging bitmap near the superblock. Also remove the silly code that retired superblock updates 100 times. This simply never made sense. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-