提交 e9edcee0 编写于 作者: T Takashi Iwai 提交者: Jaroslav Kysela

[ALSA] hda-codec - More fix of ALC880 codec support

Documentation,HDA Codec driver,HDA generic driver,HDA Intel driver
- Fix some invalid configurations, typos in the last patch
- Make init_verbs chainable, so that different configs can share the same
  init_verbs
- Reorder and clean up the source codes in patch_realtek.c
- Add the pin default configuration parser, used commonly in cmedia
  and realtek patch codes.
- Add 'auto' model to ALC880 for auto-configuration from BIOS
  Use this model as default, and 3-stack as fallback
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 b636a71d
......@@ -638,6 +638,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
5stack-digout 5-jack in back, 2-jack in front, a SPDIF out
w810 3-jack
z71v 3-jack (HP shared SPDIF)
asus 3-jack
uniwill 3-jack
F1734 2-jack
CMI9880
minimal 3-jack in back
......@@ -645,6 +648,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
full 6-jack in back, 2-jack in front
full_dig 6-jack in back, 2-jack in front, SPDIF I/O
allout 5-jack in back, 2-jack in front, SPDIF out
auto auto-config reading BIOS (default)
Note 2: If you get click noises on output, try the module option
position_fix=1 or 2. position_fix=1 will use the SD_LPIB
......
......@@ -1520,9 +1520,9 @@ int snd_hda_build_pcms(struct hda_bus *bus)
*
* If no entries are matching, the function returns a negative value.
*/
int snd_hda_check_board_config(struct hda_codec *codec, struct hda_board_config *tbl)
int snd_hda_check_board_config(struct hda_codec *codec, const struct hda_board_config *tbl)
{
struct hda_board_config *c;
const struct hda_board_config *c;
if (codec->bus->modelname) {
for (c = tbl; c->modelname || c->pci_subvendor; c++) {
......@@ -1714,6 +1714,105 @@ int snd_hda_multi_out_analog_cleanup(struct hda_codec *codec, struct hda_multi_o
return 0;
}
/*
* Helper for automatic ping configuration
*/
/* parse all pin widgets and store the useful pin nids to cfg */
int snd_hda_parse_pin_def_config(struct hda_codec *codec, struct auto_pin_cfg *cfg)
{
hda_nid_t nid, nid_start;
int i, j, nodes;
short seq, sequences[4], assoc_line_out;
memset(cfg, 0, sizeof(*cfg));
memset(sequences, 0, sizeof(sequences));
assoc_line_out = 0;
nodes = snd_hda_get_sub_nodes(codec, codec->afg, &nid_start);
for (nid = nid_start; nid < nodes + nid_start; nid++) {
unsigned int wid_caps = snd_hda_param_read(codec, nid,
AC_PAR_AUDIO_WIDGET_CAP);
unsigned int wid_type = (wid_caps & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
unsigned int def_conf;
short assoc, loc;
/* read all default configuration for pin complex */
if (wid_type != AC_WID_PIN)
continue;
def_conf = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
if (get_defcfg_connect(def_conf) == AC_JACK_PORT_NONE)
continue;
loc = get_defcfg_location(def_conf);
switch (get_defcfg_device(def_conf)) {
case AC_JACK_LINE_OUT:
case AC_JACK_SPEAKER:
seq = get_defcfg_sequence(def_conf);
assoc = get_defcfg_association(def_conf);
if (! assoc)
continue;
if (! assoc_line_out)
assoc_line_out = assoc;
else if (assoc_line_out != assoc)
continue;
if (cfg->line_outs >= ARRAY_SIZE(cfg->line_out_pins))
continue;
cfg->line_out_pins[cfg->line_outs] = nid;
sequences[cfg->line_outs] = seq;
cfg->line_outs++;
break;
case AC_JACK_HP_OUT:
cfg->hp_pin = nid;
break;
case AC_JACK_MIC_IN:
if (loc == AC_JACK_LOC_FRONT)
cfg->input_pins[AUTO_PIN_FRONT_MIC] = nid;
else
cfg->input_pins[AUTO_PIN_MIC] = nid;
break;
case AC_JACK_LINE_IN:
if (loc == AC_JACK_LOC_FRONT)
cfg->input_pins[AUTO_PIN_FRONT_LINE] = nid;
else
cfg->input_pins[AUTO_PIN_LINE] = nid;
break;
case AC_JACK_CD:
cfg->input_pins[AUTO_PIN_CD] = nid;
break;
case AC_JACK_AUX:
cfg->input_pins[AUTO_PIN_AUX] = nid;
break;
case AC_JACK_SPDIF_OUT:
cfg->dig_out_pin = nid;
break;
case AC_JACK_SPDIF_IN:
cfg->dig_in_pin = nid;
break;
}
}
/* sort by sequence */
for (i = 0; i < cfg->line_outs; i++)
for (j = i + 1; j < cfg->line_outs; j++)
if (sequences[i] > sequences[j]) {
seq = sequences[i];
sequences[i] = sequences[j];
sequences[j] = seq;
nid = cfg->line_out_pins[i];
cfg->line_out_pins[i] = cfg->line_out_pins[j];
cfg->line_out_pins[j] = nid;
}
/* Swap surround and CLFE: the association order is front/CLFE/surr/back */
if (cfg->line_outs >= 3) {
nid = cfg->line_out_pins[1];
cfg->line_out_pins[1] = cfg->line_out_pins[2];
cfg->line_out_pins[2] = nid;
}
return 0;
}
#ifdef CONFIG_PM
/*
* power management
......
......@@ -68,8 +68,8 @@ struct hda_gspec {
/*
* retrieve the default device type from the default config value
*/
#define get_defcfg_type(node) (((node)->def_cfg & AC_DEFCFG_DEVICE) >> AC_DEFCFG_DEVICE_SHIFT)
#define get_defcfg_location(node) (((node)->def_cfg & AC_DEFCFG_LOCATION) >> AC_DEFCFG_LOCATION_SHIFT)
#define defcfg_type(node) (((node)->def_cfg & AC_DEFCFG_DEVICE) >> AC_DEFCFG_DEVICE_SHIFT)
#define defcfg_location(node) (((node)->def_cfg & AC_DEFCFG_LOCATION) >> AC_DEFCFG_LOCATION_SHIFT)
/*
* destructor
......@@ -323,7 +323,7 @@ static struct hda_gnode *parse_output_jack(struct hda_codec *codec,
if (! (node->pin_caps & AC_PINCAP_OUT))
continue;
if (jack_type >= 0) {
if (jack_type != get_defcfg_type(node))
if (jack_type != defcfg_type(node))
continue;
if (node->wid_caps & AC_WCAP_DIGITAL)
continue; /* skip SPDIF */
......@@ -418,8 +418,8 @@ static int capture_source_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *uc
*/
static const char *get_input_type(struct hda_gnode *node, unsigned int *pinctl)
{
unsigned int location = get_defcfg_location(node);
switch (get_defcfg_type(node)) {
unsigned int location = defcfg_location(node);
switch (defcfg_type(node)) {
case AC_JACK_LINE_IN:
if ((location & 0x0f) == AC_JACK_LOC_FRONT)
return "Front Line";
......
......@@ -1458,7 +1458,7 @@ static struct pci_device_id azx_ids[] = {
{ 0x8086, 0x269a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ESB2 */
{ 0x1002, 0x437b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ATI SB450 */
{ 0x1106, 0x3288, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* VIA VT8251/VT8237A */
{ 0x10b9, 0x5461, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ULI */
{ 0x10b9, 0x5461, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ALI 5461? */
{ 0, }
};
MODULE_DEVICE_TABLE(pci, azx_ids);
......
......@@ -130,7 +130,7 @@ struct hda_board_config {
unsigned short pci_subdevice;
};
int snd_hda_check_board_config(struct hda_codec *codec, struct hda_board_config *tbl);
int snd_hda_check_board_config(struct hda_codec *codec, const struct hda_board_config *tbl);
int snd_hda_add_new_ctls(struct hda_codec *codec, snd_kcontrol_new_t *knew);
/*
......@@ -158,4 +158,35 @@ struct hda_bus_unsolicited {
struct work_struct work;
};
/*
* Helper for automatic ping configuration
*/
enum {
AUTO_PIN_MIC,
AUTO_PIN_FRONT_MIC,
AUTO_PIN_LINE,
AUTO_PIN_FRONT_LINE,
AUTO_PIN_CD,
AUTO_PIN_AUX,
AUTO_PIN_LAST
};
struct auto_pin_cfg {
int line_outs;
hda_nid_t line_out_pins[4]; /* sorted in the order of Front/Surr/CLFE/Side */
hda_nid_t hp_pin;
hda_nid_t input_pins[AUTO_PIN_LAST];
hda_nid_t dig_out_pin;
hda_nid_t dig_in_pin;
};
#define get_defcfg_connect(cfg) ((cfg & AC_DEFCFG_PORT_CONN) >> AC_DEFCFG_PORT_CONN_SHIFT)
#define get_defcfg_association(cfg) ((cfg & AC_DEFCFG_DEF_ASSOC) >> AC_DEFCFG_ASSOC_SHIFT)
#define get_defcfg_location(cfg) ((cfg & AC_DEFCFG_LOCATION) >> AC_DEFCFG_LOCATION_SHIFT)
#define get_defcfg_sequence(cfg) (cfg & AC_DEFCFG_SEQUENCE)
#define get_defcfg_device(cfg) ((cfg & AC_DEFCFG_DEVICE) >> AC_DEFCFG_DEVICE_SHIFT)
int snd_hda_parse_pin_def_config(struct hda_codec *codec, struct auto_pin_cfg *cfg);
#endif /* __SOUND_HDA_LOCAL_H */
......@@ -51,6 +51,7 @@ struct cmi_spec {
/* playback */
struct hda_multi_out multiout;
hda_nid_t dac_nids[4]; /* NID for each DAC */
int num_dacs;
/* capture */
hda_nid_t *adc_nids;
......@@ -77,6 +78,19 @@ struct cmi_spec {
struct hda_verb multi_init[9]; /* 2 verbs for each pin + terminator */
};
/* amp values */
#define AMP_IN_MUTE(idx) (0x7080 | ((idx)<<8))
#define AMP_IN_UNMUTE(idx) (0x7000 | ((idx)<<8))
#define AMP_OUT_MUTE 0xb080
#define AMP_OUT_UNMUTE 0xb000
#define AMP_OUT_ZERO 0xb000
/* pinctl values */
#define PIN_IN 0x20
#define PIN_VREF80 0x24
#define PIN_VREF50 0x21
#define PIN_OUT 0x40
#define PIN_HP 0xc0
/*
* input MUX
*/
......@@ -114,9 +128,9 @@ static int cmi_mux_enum_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucon
/* 3-stack / 2 channel */
static struct hda_verb cmi9880_ch2_init[] = {
/* set line-in PIN for input */
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
/* set mic PIN for input, also enable vref */
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
/* route front PCM (DAC1) to HP */
{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00 },
{}
......@@ -125,9 +139,9 @@ static struct hda_verb cmi9880_ch2_init[] = {
/* 3-stack / 6 channel */
static struct hda_verb cmi9880_ch6_init[] = {
/* set line-in PIN for output */
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
/* set mic PIN for output */
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
/* route front PCM (DAC1) to HP */
{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00 },
{}
......@@ -136,9 +150,9 @@ static struct hda_verb cmi9880_ch6_init[] = {
/* 3-stack+front / 8 channel */
static struct hda_verb cmi9880_ch8_init[] = {
/* set line-in PIN for output */
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
/* set mic PIN for output */
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
/* route rear-surround PCM (DAC4) to HP */
{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x03 },
{}
......@@ -281,27 +295,27 @@ static hda_nid_t cmi9880_adc_nids[2] = {
*/
static struct hda_verb cmi9880_basic_init[] = {
/* port-D for line out (rear panel) */
{ 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
{ 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
/* port-E for HP out (front panel) */
{ 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
{ 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
/* route front PCM to HP */
{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00 },
/* port-A for surround (rear panel) */
{ 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
{ 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
/* port-G for CLFE (rear panel) */
{ 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
{ 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
{ 0x1f, AC_VERB_SET_CONNECT_SEL, 0x02 },
/* port-H for side (rear panel) */
{ 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
{ 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
{ 0x20, AC_VERB_SET_CONNECT_SEL, 0x01 },
/* port-C for line-in (rear panel) */
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
/* port-B for mic-in (rear panel) with vref */
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
/* port-F for mic-in (front panel) with vref */
{ 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
{ 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
/* CD-in */
{ 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
{ 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
/* route front mic to ADC1/2 */
{ 0x08, AC_VERB_SET_CONNECT_SEL, 0x05 },
{ 0x09, AC_VERB_SET_CONNECT_SEL, 0x05 },
......@@ -310,27 +324,27 @@ static struct hda_verb cmi9880_basic_init[] = {
static struct hda_verb cmi9880_allout_init[] = {
/* port-D for line out (rear panel) */
{ 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
{ 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
/* port-E for HP out (front panel) */
{ 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
{ 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
/* route front PCM to HP */
{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00 },
/* port-A for side (rear panel) */
{ 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
{ 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
/* port-G for CLFE (rear panel) */
{ 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
{ 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
{ 0x1f, AC_VERB_SET_CONNECT_SEL, 0x02 },
/* port-H for side (rear panel) */
{ 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
{ 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
{ 0x20, AC_VERB_SET_CONNECT_SEL, 0x01 },
/* port-C for surround (rear panel) */
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
/* port-B for mic-in (rear panel) with vref */
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
/* port-F for mic-in (front panel) with vref */
{ 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
{ 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
/* CD-in */
{ 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
{ 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
/* route front mic to ADC1/2 */
{ 0x08, AC_VERB_SET_CONNECT_SEL, 0x05 },
{ 0x09, AC_VERB_SET_CONNECT_SEL, 0x05 },
......@@ -365,101 +379,9 @@ static int cmi9880_build_controls(struct hda_codec *codec)
return 0;
}
#define get_defcfg_connect(cfg) ((cfg & AC_DEFCFG_PORT_CONN) >> AC_DEFCFG_PORT_CONN_SHIFT)
#define get_defcfg_association(cfg) ((cfg & AC_DEFCFG_DEF_ASSOC) >> AC_DEFCFG_ASSOC_SHIFT)
#define get_defcfg_sequence(cfg) (cfg & AC_DEFCFG_SEQUENCE)
/* get all pin default configuration in def_conf */
static int cmi9880_get_pin_def_config(struct hda_codec *codec)
{
struct cmi_spec *spec = codec->spec;
hda_nid_t nid, nid_start;
int i = 0, nodes;
nodes = snd_hda_get_sub_nodes(codec, codec->afg, &nid_start);
for (nid = nid_start; nid < nodes + nid_start; nid++) {
unsigned int wid_caps = snd_hda_param_read(codec, nid,
AC_PAR_AUDIO_WIDGET_CAP);
unsigned int wid_type = (wid_caps & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
/* read all default configuration for pin complex */
if (wid_type == AC_WID_PIN) {
spec->pin_nid[i] = nid;
spec->def_conf[i] =
snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_CONFIG_DEFAULT, 0);
i++;
}
}
spec->pin_def_confs = i;
return 0;
}
/* get a pin default configuration of nid in def_conf */
static unsigned int cmi9880_get_def_config(struct hda_codec *codec, hda_nid_t nid)
{
struct cmi_spec *spec = codec->spec;
int i = 0;
while (spec->pin_nid[i] != nid && i < spec->pin_def_confs)
i++;
if (i == spec->pin_def_confs)
return (unsigned int) -1;
else
return spec->def_conf[i];
}
/* decide what pins to use for multichannel playback */
static int cmi9880_get_multich_pins(struct hda_codec *codec)
{
struct cmi_spec *spec = codec->spec;
int i, j, pins, seq[4];
int max_channel = 0;
unsigned int def_conf, sequence;
hda_nid_t nid;
memset(spec->multich_pin, 0, sizeof(spec->multich_pin));
for (pins = 0, i = 0; i < spec->pin_def_confs && pins < 4; i++) {
def_conf = spec->def_conf[i];
/* skip pin not connected */
if (get_defcfg_connect(def_conf) == AC_JACK_PORT_NONE)
continue;
/* get the sequence if association == 1 */
/* the other pins have association = 0, incorrect in spec 1.0 */
if (get_defcfg_association(def_conf) == 1) {
sequence = get_defcfg_sequence(def_conf);
seq[pins] = sequence;
spec->multich_pin[pins] = spec->pin_nid[i];
pins++; // ready for next slot
max_channel += 2;
}
}
/* sort by sequence, data collected here will be for Windows */
for (i = 0; i < pins; i++) {
for (j = i + 1; j < pins; j++) {
if (seq[j] < seq[i]) {
sequence = seq[j];
nid = spec->multich_pin[j];
seq[j] = seq[i];
spec->multich_pin[j] = spec->multich_pin[i];
seq[i] = sequence;
spec->multich_pin[i] = nid;
}
}
}
/* the pin assignment is for front, C/LFE, surround and back */
if (max_channel >= 6) {
hda_nid_t temp;
/* exchange pin of C/LFE and surround */
temp = spec->multich_pin[1];
spec->multich_pin[1] = spec->multich_pin[2];
spec->multich_pin[2] = temp;
}
return max_channel;
}
/* fill in the multi_dac_nids table, which will decide
which audio widget to use for each channel */
static int cmi9880_fill_multi_dac_nids(struct hda_codec *codec)
static int cmi9880_fill_multi_dac_nids(struct hda_codec *codec, const struct auto_pin_cfg *cfg)
{
struct cmi_spec *spec = codec->spec;
hda_nid_t nid;
......@@ -470,32 +392,34 @@ static int cmi9880_fill_multi_dac_nids(struct hda_codec *codec)
memset(spec->dac_nids, 0, sizeof(spec->dac_nids));
memset(assigned, 0, sizeof(assigned));
/* check the pins we found */
for (i = 0; i < spec->multiout.max_channels / 2; i++) {
nid = spec->multich_pin[i];
for (i = 0; i < cfg->line_outs; i++) {
nid = cfg->line_out_pins[i];
/* nid 0x0b~0x0e is hardwired to audio widget 0x3~0x6 */
if (nid <= 0x0e && nid >= 0x0b) {
spec->dac_nids[i] = nid - 0x08;
if (nid >= 0x0b && nid <= 0x0e) {
spec->dac_nids[i] = (nid - 0x0b) + 0x03;
assigned[nid - 0x0b] = 1;
}
}
/* left pin can be connect to any audio widget */
for (i = 0; i < spec->multiout.max_channels / 2; i++) {
if (!assigned[i]) {
/* search for an empty channel */
/* I should also check the pin type */
for (j = 0; j < ARRAY_SIZE(spec->dac_nids); j++)
if (! spec->dac_nids[j]) {
spec->dac_nids[j] = i + 3;
assigned[i] = 1;
break;
}
for (i = 0; i < cfg->line_outs; i++) {
nid = cfg->line_out_pins[i];
if (nid <= 0x0e)
continue;
/* search for an empty channel */
for (j = 0; j < cfg->line_outs; j++) {
if (! assigned[j]) {
spec->dac_nids[i] = i + 0x03;
assigned[j] = 1;
break;
}
}
}
spec->num_dacs = cfg->line_outs;
return 0;
}
/* create multi_init table, which is used for multichannel initialization */
static int cmi9880_fill_multi_init(struct hda_codec *codec)
static int cmi9880_fill_multi_init(struct hda_codec *codec, const struct auto_pin_cfg *cfg)
{
struct cmi_spec *spec = codec->spec;
hda_nid_t nid;
......@@ -503,29 +427,26 @@ static int cmi9880_fill_multi_init(struct hda_codec *codec)
/* clear the table, only one c-media dac assumed here */
memset(spec->multi_init, 0, sizeof(spec->multi_init));
for (j = 0, i = 0; i < spec->multiout.max_channels / 2; i++) {
for (j = 0, i = 0; i < cfg->line_outs; i++) {
hda_nid_t conn[4];
nid = spec->multich_pin[i];
nid = cfg->line_out_pins[i];
/* set as output */
spec->multi_init[j].nid = nid;
spec->multi_init[j].verb = AC_VERB_SET_PIN_WIDGET_CONTROL;
spec->multi_init[j].param = 0xc0;
spec->multi_init[j].param = PIN_OUT;
j++;
/* nid 0x0f,0x10,0x1f,0x20 are needed to set connection */
switch (nid) {
case 0x0f:
case 0x10:
case 0x1f:
case 0x20:
if (nid > 0x0e) {
/* set connection */
spec->multi_init[j].nid = nid;
spec->multi_init[j].verb = AC_VERB_SET_CONNECT_SEL;
spec->multi_init[j].param = 0;
/* find the index in connect list */
len = snd_hda_get_connections(codec, nid, conn, 4);
for (k = 0; k < len; k++)
if (conn[k] == spec->dac_nids[i])
if (conn[k] == spec->dac_nids[i]) {
spec->multi_init[j].param = j;
break;
spec->multi_init[j].param = k < len ? k : 0;
}
j++;
break;
}
......@@ -759,6 +680,7 @@ static int patch_cmi9880(struct hda_codec *codec)
/* copy default DAC NIDs */
memcpy(spec->dac_nids, cmi9880_dac_nids, sizeof(spec->dac_nids));
spec->num_dacs = 4;
switch (spec->board_config) {
case CMI_MINIMAL:
......@@ -795,18 +717,16 @@ static int patch_cmi9880(struct hda_codec *codec)
{
unsigned int port_e, port_f, port_g, port_h;
unsigned int port_spdifi, port_spdifo;
int max_channels;
struct auto_pin_cfg cfg;
/* collect pin default configuration */
cmi9880_get_pin_def_config(codec);
port_e = cmi9880_get_def_config(codec, 0x0f);
port_f = cmi9880_get_def_config(codec, 0x10);
port_g = cmi9880_get_def_config(codec, 0x1f);
port_h = cmi9880_get_def_config(codec, 0x20);
port_spdifi = cmi9880_get_def_config(codec, 0x13);
port_spdifo = cmi9880_get_def_config(codec, 0x12);
port_e = snd_hda_codec_read(codec, 0x0f, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
port_f = snd_hda_codec_read(codec, 0x10, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
spec->front_panel = 1;
if (get_defcfg_connect(port_e) == AC_JACK_PORT_NONE ||
get_defcfg_connect(port_f) == AC_JACK_PORT_NONE) {
port_g = snd_hda_codec_read(codec, 0x1f, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
port_h = snd_hda_codec_read(codec, 0x20, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
spec->surr_switch = 1;
/* no front panel */
if (get_defcfg_connect(port_g) == AC_JACK_PORT_NONE ||
......@@ -824,24 +744,26 @@ static int patch_cmi9880(struct hda_codec *codec)
spec->multiout.max_channels = cmi9880_channel_modes[0].channels;
} else {
spec->input_mux = &cmi9880_basic_mux;
port_spdifi = snd_hda_codec_read(codec, 0x13, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
port_spdifo = snd_hda_codec_read(codec, 0x12, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
if (get_defcfg_connect(port_spdifo) != AC_JACK_PORT_NONE)
spec->multiout.dig_out_nid = CMI_DIG_OUT_NID;
if (get_defcfg_connect(port_spdifi) != AC_JACK_PORT_NONE)
spec->dig_in_nid = CMI_DIG_IN_NID;
spec->multiout.max_channels = 8;
}
max_channels = cmi9880_get_multich_pins(codec);
if (max_channels > 0) {
spec->multiout.max_channels = max_channels;
cmi9880_fill_multi_dac_nids(codec);
cmi9880_fill_multi_init(codec);
snd_hda_parse_pin_def_config(codec, &cfg);
if (cfg.line_outs) {
spec->multiout.max_channels = cfg.line_outs * 2;
cmi9880_fill_multi_dac_nids(codec, &cfg);
cmi9880_fill_multi_init(codec, &cfg);
} else
snd_printd("patch_cmedia: cannot detect association in defcfg\n");
break;
}
}
spec->multiout.num_dacs = 4;
spec->multiout.num_dacs = spec->num_dacs;
spec->multiout.dac_nids = spec->dac_nids;
spec->adc_nids = cmi9880_adc_nids;
......
此差异已折叠。
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册