By setting a flag during a 32bit system call only
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch is on the same lines as Zachary Amsden's i386 GDT page alignemnt
patch in -mm, but for x86_64.

Patch to align and pad x86_64 GDT on page boundries.

[AK: some minor cleanups and fixed incorrect TLS initialization
in CPU init.]
Signed-off-by: NNippun Goel <nippung@calsoftinc.com>
Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: NShai Fultheim <shai@scalex86.org>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This might help on distributions that use a 32bit biarch compiler.

First pass -m64 by default.

Secondly add some more .code32s because at least the Ubuntu biarch
32bit as called by gcc doesn't seem to handle -m64 -m32 as generated
by the Makefile without such assistance.

And finally make sure the linker script can be preprocessed
with a 32bit cpp.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some people need it now on 64bit so reuse the i386 code for
x86-64. This will be also useful for future bug workarounds.

It is a bit simplified there because there is no need
to do it very early on x86-64. This means it doesn't need
early ioremap et.al. We run it as a core initcall right now.

I hope it's not needed for early setup.

I added a general CONFIG_DMI symbol in case IA64 or someone
else wants to reuse the code later too.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The introduction of call_softirq switching to the interrupt stack several
releases earlier resulted in a problem with the code in show_trace, which
assumes that it can pick the previous stack pointer from the end of the
interrupt stack.

Cc: Andi Kleen <ak@muc.de>
Cc: Arjan van de Ven <arjanv@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

So why are we calling smp_send_stop from machine_halt?

We don't.

Looking more closely at the bug report the problem here
is that halt -p is called which triggers not a halt but
an attempt to power off.

machine_power_off calls machine_shutdown which calls smp_send_stop.

If pm_power_off is set we should never make it out machine_power_off
to the call of do_exit.  So pm_power_off must not be set in this case.
When pm_power_off is not set we expect machine_power_off to devolve
into machine_halt.

So how do we fix this?

Playing too much with smp_send_stop is dangerous because it
must also be safe to be called from panic.

It looks like the obviously correct fix is to only call
machine_shutdown when pm_power_off is defined.  Doing
that will make Andi's assumption about not scheduling
true and generally simplify what must be supported.

This turns machine_power_off into a noop like machine_halt
when pm_power_off is not defined.

If the expected behavior is that sys_reboot(LINUX_REBOOT_CMD_POWER_OFF)
becomes sys_reboot(LINUX_REBOOT_CMD_HALT) if pm_power_off is NULL
this is not quite a comprehensive fix as we pass a different parameter
to the reboot notifier and we set system_state to a different value
before calling device_shutdown().

Unfortunately any fix more comprehensive I can think of is not
obviously correct.  The core problem is that there is no architecture
independent way to detect if machine_power will become a noop, without
calling it.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I noticed that some lowlevel send_IPI_mask helpers had a hotplug/preempt
race whereupon the cpu_online_map was read before disabling preemption;

...
cpumask_t mask = cpu_online_map;
int cpu = get_cpu();
cpu_clear(cpu, mask);
...

But then i realised that there is no need for these lowlevel functions to
be going through all this trouble when all the callers are already made
hotplug/preempt safe.
Signed-off-by: NZwane Mwaikambo <zwane@arm.linux.org.uk>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There is one CPU here whose MCE bank count is 6. This patch increases
x86_64's MCE bank count.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The following is probably a good idea given that the atomic_set() isn't
a barrier here either.
Signed-off-by: NBenjamin LaHaise <benjamin.c.lahaise@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This
- switches the INT3 handler to run on an IST stack (to cope with
  breakpoints set by a kernel debugger on places where the kernel's
  %gs base hasn't been set up, yet); the IST stack used is shared with
  the INT1 handler's
[AK: this also allows setting a kprobe on the interrupt/exception entry
points]
- allows nesting of INT1/INT3 handlers so that one can, with a kernel
  debugger, debug (at least) the user-mode portions of the INT1/INT3
  handling; the nesting isn't actively enabled here since a kernel-
  debugger-free kernel doesn't need it
Signed-Off-By: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Previously apic was foced with apic=logopt was specified.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It might be still needed for non APIC related issues.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Print bits for RDTSCP, SVM, CR8-LEGACY.

Also now print power flags on i386 like x86-64 always did.
This will add a new line in the 386 cpuinfo, but that shouldn't
be an issue - did that in the past too and I haven't heard
of any breakage.

I shrunk some of the fields in the i386 cpuinfo_x86 to chars
to make up for the new int "x86_power" field. Overall it's
smaller than before.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Define it for i386 too.

This is a synthetic flag that signifies that the CPU's TSC runs
at a constant P state invariant frequency.

Fix up the logic on x86-64/i386 to set it on all known CPUs.
Use the AMD defined bit to set it on future AMD CPUs.

Cc: venkatesh.pallipadi@intel.com
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Was only used by the floppy driver to work around some ancient
hardware bug that should never occur on any 64bit system.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Most users don't need it so no need to waste memory.
This means an user has to specify the appropiate number of
hotplug CPUs on the command line with additional_cpus=...
or fix their BIOS to follow the convention in
Documentation/x86-64/cpu-hotplug-spec
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

head.S already clears EFLAGS completely. Following an i386 patch from
Zachary Amsden.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make sure no iret can fault without attached recovery code.
Cannot happen in the normal case, but might be useful
with kernel debuggers
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Since a double fault always implies that kernel data structures are
corrupt, this fault should neither be handed to user mode handling,
nor should the handler allow resuming the faulting code stream (since
architecturally this isn't a fault, but an abort).

Note that this slightly depends on the previously submitted patch
adjusting the prototype of notify_die() (a compiler warning will result
without that other patch).

AK: Removed obsolete CONFIG_CHECKING code, added comments
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This adjusts things so that handlers of the die() notifier will have
sufficient information about the trap currently being handled. It also
adjusts the notify_die() prototype to (again) match that of i386.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Other than apparently commonly assumed, the bound instruction does not
require the corresponding IDT entry to have DPL 3.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As a follow-up to the introduction of CONFIG_UNWIND_INFO, this
separates the generation of frame unwind information for x86-64 from
that of full debug information.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Based on the documentation recently posted by Richard Brunner.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

arch: Use <linux/capability.h> where capable() is used.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There is a window where a probe gets removed right after the probe is hit
on some different cpu.  In this case probe handlers can't find a matching
probe instance related to break address.  In this case we need to read the
original instruction at break address to see if that is not a break/int3
instruction and recover safely.

Previous code had a bug where we were not checking for the above race in
case of reentrant probes and the below patch fixes this race.

Tested on IA64, Powerpc, x86_64.
Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The following patch (against 2.6.15-rc5-mm3) fixes a kprobes build break
due to changes introduced in the kprobe locking in 2.6.15-rc5-mm3.  In
addition, the patch reverts back the open-coding of kprobe_mutex.
Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently arch_remove_kprobes() is only implemented/required for x86_64 and
powerpc.  All other architecture like IA64, i386 and sparc64 implementes a
dummy function which is being called from arch independent kprobes.c file.

This patch removes the dummy functions and replaces it with
#define arch_remove_kprobe(p, s)	do { } while(0)
Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Based on some feedback from Oleg Nesterov, I have made few changes to
previously posted patch.
Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Since Kprobes runtime exception handlers is now lock free as this code path is
now using RCU to walk through the list, there is no need for the
register/unregister{_kprobe} to use spin_{lock/unlock}_isr{save/restore}.  The
serialization during registration/unregistration is now possible using just a
mutex.

In the above process, this patch also fixes a minor memory leak for x86_64 and
powerpc.
Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

These days ioctl32.h is only used for communication of fs/compat.c and
fs/compat_ioctl.c and doesn't contain anything of interest to drivers.

Remove inclusion in various drivers.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Moving the crash_dump.c file to arch dependent part as kmap_atomic_pfn is
  specific to i386 and highmem may not exist in other archs.

- Use ioremap for x86_64 to map the previous kernel memory.

- In copy_oldmem_page(), we now directly copy to the user/kernel buffer and
  avoid the unneccesary copy to a kmalloc'd page.
Signed-off-by: NRachita Kothiyal <rachita@in.ibm.com>
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Saving the cpu registers of all cpus before booting in to the crash
  kernel.

- crash_setup_regs will save the registers of the cpu on which panic has
  occured.  One of the concerns ppc64 folks raised is that after capturing the
  register states, one should not pop the current call frame and push new one.
   Hence it has been inlined.  More call frames later get pushed on to stack
  (machine_crash_shutdown() and machine_kexec()), but one will not want to
  backtrace those.

- Not very sure about the CFI annotations.  With this patch I am getting
  decent backtrace with gdb.  Assuming, compiler has generated enough
  debugging information for crash_kexec().  Coding crash_setup_regs() in pure
  assembly makes it tricky because then it can not be inlined and we don't
  want to return back after capturing register states we don't want to pop
  this call frame.

- Saving the non-panicing cpus registers will be done in the NMI handler
  while shooting down them in machine_crash_shutdown.

- Introducing CRASH_DUMP option in Kconfig for x86_64.
Signed-off-by: NMurali M Chakravarthy <muralim@in.ibm.com>
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Cc: Andi Kleen <ak@muc.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

)

From: Vivek Goyal <vgoyal@in.ibm.com>

- Implementing the machine_crash_shutdown for x86_64 which will be called by
  crash_kexec (called in case of a panic, sysrq etc.).  Here we do things
  similar to i386.  Disable the interrupts, shootdown the cpus and shutdown
  LAPIC and IOAPIC.

Changes in this version:

- As the Eric's APIC initialization patches are reverted back, reintroducing
  LAPIC and IOAPIC shutdown.

- Added some comments on CPU hotplug, modified code as suggested by Andi
  kleen.
Signed-off-by: NMurali M Chakravarthy <muralim@in.ibm.com>
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- elfcorehdr= specifies the location of elf core header stored by the
  crashed kernel.  This command line option will be passed by the kexec-tools
  to capture kernel.

Changes in this version :

- Added more comments in kernel-parameters.txt and in code.
Signed-off-by: NMurali M Chakravarthy <muralim@in.ibm.com>
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

)

From: Vivek Goyal <vgoyal@in.ibm.com>

- This patch introduces the memmap option for x86_64 similar to i386.

- memmap=exactmap enables setting of an exact E820 memory map, as specified
  by the user.

Changes in this version:

- Used e820_end_of_ram() to find the max_pfn as suggested by Andi kleen.

- removed PFN_UP & PFN_DOWN macros

- Printing the user defined map also.
Signed-off-by: NMurali M Chakravarthy <muralim@in.ibm.com>
Signed-off-by: NHariprasad Nellitheertha <nharipra@gmail.com>
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- In case of system crash, current state of cpu registers is saved in memory
  in elf note format.  So far memory for storing elf notes was being allocated
  statically for NR_CPUS.

- This patch introduces dynamic allocation of memory for storing elf notes.
  It uses alloc_percpu() interface.  This should lead to better memory usage.

- Introduced based on Andi Kleen's and Eric W. Biederman's suggestions.

- This patch also moves memory allocation for elf notes from architecture
  dependent portion to architecture independent portion.  Now crash_notes is
  architecture independent.  The whole idea is that size of memory to be
  allocated per cpu (MAX_NOTE_BYTES) can be architecture dependent and
  allocation of this memory can be architecture independent.
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch moves the rtc_interrupt() prototype to rtc.h and removes the
prototypes from C files.

It also renames static rtc_interrupt() functions in
arch/arm/mach-integrator/time.c and arch/sh64/kernel/time.c to avoid compile
problems.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NPaul Gortmaker <p_gortmaker@yahoo.com>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

____cacheline_maxaligned_in_smp is currently used to align critical structures
and avoid false sharing.  It uses per-arch L1_CACHE_SHIFT_MAX and people find
L1_CACHE_SHIFT_MAX useless.

However, we have been using ____cacheline_maxaligned_in_smp to align
structures on the internode cacheline size.  As per Andi's suggestion,
following patch kills ____cacheline_maxaligned_in_smp and introduces
INTERNODE_CACHE_SHIFT, which defaults to L1_CACHE_SHIFT for all arches.
Arches needing L3/Internode cacheline alignment can define
INTERNODE_CACHE_SHIFT in the arch asm/cache.h.  Patch replaces
____cacheline_maxaligned_in_smp with ____cacheline_internodealigned_in_smp

With this patch, L1_CACHE_SHIFT_MAX can be killed
Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: NShai Fultheim <shai@scalex86.org>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>