- 12 1月, 2006 40 次提交
-
-
由 Andi Kleen 提交于
By setting a flag during a 32bit system call only Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Don't need to do the vmalloc check for the module range because its PML4 is shared with the kernel text. Also removed an unnecessary TLB flush. Pointed out by Jan Beulich Cc: jbeulich@novell.com Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ravikiran G Thirumalai 提交于
This patch is on the same lines as Zachary Amsden's i386 GDT page alignemnt patch in -mm, but for x86_64. Patch to align and pad x86_64 GDT on page boundries. [AK: some minor cleanups and fixed incorrect TLS initialization in CPU init.] Signed-off-by: NNippun Goel <nippung@calsoftinc.com> Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org> Signed-off-by: NShai Fultheim <shai@scalex86.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
This might help on distributions that use a 32bit biarch compiler. First pass -m64 by default. Secondly add some more .code32s because at least the Ubuntu biarch 32bit as called by gcc doesn't seem to handle -m64 -m32 as generated by the Makefile without such assistance. And finally make sure the linker script can be preprocessed with a 32bit cpp. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ross Biro 提交于
The attempt to avoid overflow in __delay caused varying precision on different CPUs depending on differences in the CPU speed. We should be able to do this multiplication with out overflowing provided the cpu is running at less than about 128 GHz. xloops < 20000 * 0x10c6. loops_per_jiffy * HZ <= cpu_clock_speed. So if the cpu clock speed < 2^64/(20000 * 0x10c6) = 2^64/ 51E6CC0 < 2^64/2^27 = 2^37 = 128G we will not overflow the calculation. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
When we don't know the node a PCI bus is connected to return -1. This matches the generic code. Noticed by Ravikiran G Thirumalai <kiran@scalex86.org> Cc: Ravikiran G Thirumalai <kiran@scalex86.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
A lot of Opteron BIOS just pass 10 in all SLIT entries (10 is the normalized unit). This is actually worse than the default heuristic because it leads to pci_distance not knowing the difference between local and remote nodes anymore. This messes up some NUMA heuristics in generic code. In this case it's better to fall back to the default heuristic which just does nodea == nodeb ? 10 : 20. This patch does some basic sanity checking on the SLIT and only accepts the SLIT when it passes. Invariants enforced are: - Node to itself shall be 10 - Any other distance shouldn't be 10 - Distances smaller than 10 are illegal Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
And fix the test to include the size Noticed by Vivek Goyal Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Some people need it now on 64bit so reuse the i386 code for x86-64. This will be also useful for future bug workarounds. It is a bit simplified there because there is no need to do it very early on x86-64. This means it doesn't need early ioremap et.al. We run it as a core initcall right now. I hope it's not needed for early setup. I added a general CONFIG_DMI symbol in case IA64 or someone else wants to reuse the code later too. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
This was a backup file that somehow made it into the official tree. Never used for anything. Remove. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Beulich 提交于
The introduction of call_softirq switching to the interrupt stack several releases earlier resulted in a problem with the code in show_trace, which assumes that it can pick the previous stack pointer from the end of the interrupt stack. Cc: Andi Kleen <ak@muc.de> Cc: Arjan van de Ven <arjanv@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Peter Beutner 提交于
Be more careful with TF handling to fix some copy protection codes in wine patch originally for i386 by Linus, then ported to x86_64 by Andi Kleen see: [PATCH] x86_64: Some fixes for single step handling commit: be61bff7 But it was never applied to the ia32 emulation code which breaks some copy-protection schemes under wine when running on x86_64. Signed-off-by: NPeter Beutner <p.beutner@gmx.net> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Eric W. Biederman 提交于
So why are we calling smp_send_stop from machine_halt? We don't. Looking more closely at the bug report the problem here is that halt -p is called which triggers not a halt but an attempt to power off. machine_power_off calls machine_shutdown which calls smp_send_stop. If pm_power_off is set we should never make it out machine_power_off to the call of do_exit. So pm_power_off must not be set in this case. When pm_power_off is not set we expect machine_power_off to devolve into machine_halt. So how do we fix this? Playing too much with smp_send_stop is dangerous because it must also be safe to be called from panic. It looks like the obviously correct fix is to only call machine_shutdown when pm_power_off is defined. Doing that will make Andi's assumption about not scheduling true and generally simplify what must be supported. This turns machine_power_off into a noop like machine_halt when pm_power_off is not defined. If the expected behavior is that sys_reboot(LINUX_REBOOT_CMD_POWER_OFF) becomes sys_reboot(LINUX_REBOOT_CMD_HALT) if pm_power_off is NULL this is not quite a comprehensive fix as we pass a different parameter to the reboot notifier and we set system_state to a different value before calling device_shutdown(). Unfortunately any fix more comprehensive I can think of is not obviously correct. The core problem is that there is no architecture independent way to detect if machine_power will become a noop, without calling it. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Zwane Mwaikambo 提交于
I noticed that some lowlevel send_IPI_mask helpers had a hotplug/preempt race whereupon the cpu_online_map was read before disabling preemption; ... cpumask_t mask = cpu_online_map; int cpu = get_cpu(); cpu_clear(cpu, mask); ... But then i realised that there is no need for these lowlevel functions to be going through all this trouble when all the callers are already made hotplug/preempt safe. Signed-off-by: NZwane Mwaikambo <zwane@arm.linux.org.uk> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Shaohua Li 提交于
There is one CPU here whose MCE bank count is 6. This patch increases x86_64's MCE bank count. Signed-off-by: NShaohua Li <shaohua.li@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Benjamin LaHaise 提交于
The following is probably a good idea given that the atomic_set() isn't a barrier here either. Signed-off-by: NBenjamin LaHaise <benjamin.c.lahaise@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Beulich 提交于
This - switches the INT3 handler to run on an IST stack (to cope with breakpoints set by a kernel debugger on places where the kernel's %gs base hasn't been set up, yet); the IST stack used is shared with the INT1 handler's [AK: this also allows setting a kprobe on the interrupt/exception entry points] - allows nesting of INT1/INT3 handlers so that one can, with a kernel debugger, debug (at least) the user-mode portions of the INT1/INT3 handling; the nesting isn't actively enabled here since a kernel- debugger-free kernel doesn't need it Signed-Off-By: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Previously apic was foced with apic=logopt was specified. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
It might be still needed for non APIC related issues. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Print bits for RDTSCP, SVM, CR8-LEGACY. Also now print power flags on i386 like x86-64 always did. This will add a new line in the 386 cpuinfo, but that shouldn't be an issue - did that in the past too and I haven't heard of any breakage. I shrunk some of the fields in the i386 cpuinfo_x86 to chars to make up for the new int "x86_power" field. Overall it's smaller than before. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
They previously tried to figure this out on their own. Suggested by Venkatesh. Cc: venkatesh.pallipadi@intel.com Cc: davej@redhat.com Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Define it for i386 too. This is a synthetic flag that signifies that the CPU's TSC runs at a constant P state invariant frequency. Fix up the logic on x86-64/i386 to set it on all known CPUs. Use the AMD defined bit to set it on future AMD CPUs. Cc: venkatesh.pallipadi@intel.com Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Was only used by the floppy driver to work around some ancient hardware bug that should never occur on any 64bit system. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Most users don't need it so no need to waste memory. This means an user has to specify the appropiate number of hotplug CPUs on the command line with additional_cpus=... or fix their BIOS to follow the convention in Documentation/x86-64/cpu-hotplug-spec Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
head.S already clears EFLAGS completely. Following an i386 patch from Zachary Amsden. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Beulich 提交于
Adjust page fault protection error check before considering it to be a vmalloc synchronization candidate. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Beulich 提交于
Make sure no iret can fault without attached recovery code. Cannot happen in the normal case, but might be useful with kernel debuggers Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Beulich 提交于
Since a double fault always implies that kernel data structures are corrupt, this fault should neither be handed to user mode handling, nor should the handler allow resuming the faulting code stream (since architecturally this isn't a fault, but an abort). Note that this slightly depends on the previously submitted patch adjusting the prototype of notify_die() (a compiler warning will result without that other patch). AK: Removed obsolete CONFIG_CHECKING code, added comments Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Beulich 提交于
This adjusts things so that handlers of the die() notifier will have sufficient information about the trap currently being handled. It also adjusts the notify_die() prototype to (again) match that of i386. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Beulich 提交于
Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Beulich 提交于
Other than apparently commonly assumed, the bound instruction does not require the corresponding IDT entry to have DPL 3. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Beulich 提交于
As a follow-up to the introduction of CONFIG_UNWIND_INFO, this separates the generation of frame unwind information for x86-64 from that of full debug information. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Based on the documentation recently posted by Richard Brunner. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Beulich 提交于
Frame unwind information was still incorrect for ia32_ptregs_common (sorry, my fault), and could be improved for some of the other entry points. Signed-Off-By: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
arch: Use <linux/capability.h> where capable() is used. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Keshavamurthy Anil S 提交于
There is a window where a probe gets removed right after the probe is hit on some different cpu. In this case probe handlers can't find a matching probe instance related to break address. In this case we need to read the original instruction at break address to see if that is not a break/int3 instruction and recover safely. Previous code had a bug where we were not checking for the above race in case of reentrant probes and the below patch fixes this race. Tested on IA64, Powerpc, x86_64. Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
The HDIO_GETGEO patch left an unused variable in the UML block driver. This gets rid of it. Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
The debug-stub patch was broken on x86_64 because it thinks the frame size there is 168 words. In reality, it is 168 bytes, and using HOST_FRAME_SIZE, which is expressed in consistent units across architectures, fixes this. Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-