This should eliminate (at least in the mid layer) to make numeric
assumptions about any of the enumeration variables.  As a side effect,
it will also make all the messages consistent and line us up nicely for
the error logging strategy (if it ever shows itself again).
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Here's a patch which drops the eh_active checks in the qla2xxx
eh_handler callbacks.
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Be more careful about doing the arithmetic in the non-LBD case.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

While populating command type 6 and 7 IOCBs.
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

ISP23xx and ISP24xx chips have support for an adaptive
method of posting SCSI command completions for multiple SCSI
commands during a single system interrupt.

SCSI commands are placed on the system response queue
without interrupting the host until 1) a delay timer
expires; or 2) a SCSI command completes with an error.

As long as the host software (qla2xxx) services the response
queue for completions (this polling is done during
queuecommand()) within the 'delay timer' period, the
firmware will not generate system interrupt.
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

The non-handled failure cases of the Fabric Login mailbox
command handling logic would incorrectly mark the fcport as
dead and not allow the standard port-down-retry-count logic
to manage the transition.
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Received from Mark Salyzyn.

This patch adds the 'new comm' interface, which modern AAC based
adapters that are less than a year old support in the name of much
improved performance. These modern adapters support both the legacy and
the 'new comm' interfaces.
Signed-off-by: NMark Haverkamp <markh@osdl.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Minor manual fixups for gfp_t clashes.

Received from Mark Salyzyn.

This patch resolves a compiler warning on 64 bit architectures.
Signed-off-by: NMark Haverkamp <markh@osdl.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Received from Mark Salyzyn.

The compat field needed to be in cpu order.
Signed-off-by: NMark Haverkamp <markh@osdl.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Received from Mark Salyzyn.

This patch uses the adapter supplemental information AdapterTypeText as
the default for the array name.
Signed-off-by: NMark Haverkamp <markh@osdl.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

From: Mark Haverkamp <markh@osdl.org>
Received from Mark Salyzyn.

This patch changes the driver over to utilizing the DMA_64BIT_MASK and
DMA_32BIT_MASK manifests.

Applies to the scsi-rc-fixes-2.6 git tree.
Signed-off-by: NMark Haverkamp <markh@osdl.org>

Rejects fixed up and
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Manual fixup for trivial "gfp_t" changes.

Patch from Bellido Nicolas

The AAED-2000 is equiped with an 640x480 LCD.
This adds the parameters that will be passed to the AAEC-2000 platform code.
Signed-off-by: NNicolas Bellido <ml@acolin.be>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Bellido Nicolas

The AAEC-2000 has an ARM PrimeCell PL110 Color LCD Controller.
This patch contains the platform glue that will be used by specific boards.
Signed-off-by: NNicolas Bellido <ml@acolin.be>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Bellido Nicolas

Here is a preliminary clock interface support for the AAEC-2000.
Signed-off-by: NNicolas Bellido <ml@acolin.be>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Bellido Nicolas

This adds platform code for MTD devices on AAEC-2000.
Signed-off-by: NNicolas Bellido <ml@acolin.be>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Bellido Nicolas

linux/config.h is not necessary in hardware.h, while asm/sizes.h and asm/arch//aaec2000.h will be used later.
Signed-off-by: NNicolas Bellido <ml@acolin.be>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Bellido Nicolas

The AAED-2000 board has GPIO pins on an external port.
This patch adds the defines, and do the necessary mapping.
Signed-off-by: NNicolas Bellido <ml@acolin.be>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Bellido Nicolas

Add defines for GPIO registers on the AAEC-2000 processor.
Signed-off-by: NNicolas Bellido <ml@acolin.be>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Nicolas Pitre

This is the PXA2xx common IRDA driver, plus platform support
for Lubbock and Mainstone.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Acked-by: NJean Tourrilhes <jt@hpl.hp.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Nicolas Pitre

From: Daniel Jacobowitz <dan@debian.org>

> I also fixed a bug that confused me greatly while trying to debug: one
> SIGILL has long been a SIGSEGV because of some broken RISCOS
> compatibility code.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Erik Hovland

I noticed that the same typo (i before c in associated) showed up twice
in the file kernel/include/linux/mmc/mmc.h.

This patch fixes both of the instances I found with this mistake. The
typos are in comments and should have no affect on working code.

E
Signed-off-by: NErik Hovland <erik@hovland.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Jon Ringle

This adds support for the RTC and nvram on the Comdial MP1000

Signed-off-by: Jon Ringle
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Matt Reimer

Adds support for HWUART on PXA 255 / 26x. This patch originally came from
http://svn.rungie.com/svn/gumstix-buildroot/trunk/sources/kernel-patches/000-gumstix-hwuart.patch
and has been tweaked by me.
Signed-off-by: NMatt Reimer <mreimer@vpop.net>
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Todd Poynor

Add symbols for PXA2xx PWRMODE register M field that selects low-power
mode, replace unadorned constants.  Honor power mode parameter of
pxa_cpu_suspend(mode), no longer force to 3 (sleep).  Full Deep Sleep
low-power mode support for PXA27x is pending generic PM interfaces to
select more than 2 suspend-to-RAM-style power modes, but this is
expected soon. This can be hardcoded in the meantime by replacing the
pxa_cpu_suspend() parameter value.  From David Burrage and Todd Poynor.
Try #2 removes one of the register copies and moves the code to save the
pxa_cpu_suspend parameter to immediately surround the call that requires
the parameter value be preserved.
Signed-off-by: NTodd Poynor <tpoynor@mvista.com>
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Jon Ringle

This patch gives support for the CS8900A ethernet chip on the Comdial MP1000

Signed-off-by: Jon Ringle
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Jon Ringle

Updated 2898/1 per comments:
- Removed fixup
- Moved code in mach-mp1000/ to mach-clps711x/
- Cleaned up code in mp1000-seprom.c. Eliminated code that displayed the contents of the eeprom
Please comment.

Signed-off-by: Jon Ringle
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

zone handling, mapping->flags handling
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>