提交 8e0c5ebd 编写于 作者: M Mark Haverkamp 提交者: James Bottomley

[SCSI] aacraid: Newer adapter communication iterface support

Received from Mark Salyzyn.

This patch adds the 'new comm' interface, which modern AAC based
adapters that are less than a year old support in the name of much
improved performance. These modern adapters support both the legacy and
the 'new comm' interfaces.
Signed-off-by: NMark Haverkamp <markh@osdl.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
上级 38a9a621
......@@ -57,7 +57,7 @@ Deanna Bonds (non-DASD support, PAE fibs and 64 bit,
(fixed 64bit and 64G memory model, changed confusing naming convention
where fibs that go to the hardware are consistently called hw_fibs and
not just fibs like the name of the driver tracking structure)
Mark Salyzyn <Mark_Salyzyn@adaptec.com> Fixed panic issues and added some new product ids for upcoming hbas.
Mark Salyzyn <Mark_Salyzyn@adaptec.com> Fixed panic issues and added some new product ids for upcoming hbas. Performance tuning, card failover and bug mitigations.
Original Driver
-------------------------
......
o Testing
o More testing
o Drop irq_mask, basically unused
o I/O size increase
......@@ -359,15 +359,6 @@ int aac_get_containers(struct aac_dev *dev)
return status;
}
static void aac_io_done(struct scsi_cmnd * scsicmd)
{
unsigned long cpu_flags;
struct Scsi_Host *host = scsicmd->device->host;
spin_lock_irqsave(host->host_lock, cpu_flags);
scsicmd->scsi_done(scsicmd);
spin_unlock_irqrestore(host->host_lock, cpu_flags);
}
static void aac_internal_transfer(struct scsi_cmnd *scsicmd, void *data, unsigned int offset, unsigned int len)
{
void *buf;
......@@ -424,7 +415,7 @@ static void get_container_name_callback(void *context, struct fib * fibptr)
fib_complete(fibptr);
fib_free(fibptr);
aac_io_done(scsicmd);
scsicmd->scsi_done(scsicmd);
}
/**
......@@ -988,7 +979,7 @@ static void io_callback(void *context, struct fib * fibptr)
fib_complete(fibptr);
fib_free(fibptr);
aac_io_done(scsicmd);
scsicmd->scsi_done(scsicmd);
}
static int aac_read(struct scsi_cmnd * scsicmd, int cid)
......@@ -1167,7 +1158,7 @@ static int aac_read(struct scsi_cmnd * scsicmd, int cid)
* For some reason, the Fib didn't queue, return QUEUE_FULL
*/
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_TASK_SET_FULL;
aac_io_done(scsicmd);
scsicmd->scsi_done(scsicmd);
fib_complete(cmd_fibcontext);
fib_free(cmd_fibcontext);
return 0;
......@@ -1239,7 +1230,7 @@ static int aac_write(struct scsi_cmnd * scsicmd, int cid)
*/
if (!(cmd_fibcontext = fib_alloc(dev))) {
scsicmd->result = DID_ERROR << 16;
aac_io_done(scsicmd);
scsicmd->scsi_done(scsicmd);
return 0;
}
fib_init(cmd_fibcontext);
......@@ -1336,7 +1327,7 @@ static int aac_write(struct scsi_cmnd * scsicmd, int cid)
* For some reason, the Fib didn't queue, return QUEUE_FULL
*/
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_TASK_SET_FULL;
aac_io_done(scsicmd);
scsicmd->scsi_done(scsicmd);
fib_complete(cmd_fibcontext);
fib_free(cmd_fibcontext);
......@@ -1380,7 +1371,7 @@ static void synchronize_callback(void *context, struct fib *fibptr)
fib_complete(fibptr);
fib_free(fibptr);
aac_io_done(cmd);
cmd->scsi_done(cmd);
}
static int aac_synchronize(struct scsi_cmnd *scsicmd, int cid)
......@@ -2097,7 +2088,7 @@ static void aac_srb_callback(void *context, struct fib * fibptr)
fib_complete(fibptr);
fib_free(fibptr);
aac_io_done(scsicmd);
scsicmd->scsi_done(scsicmd);
}
/**
......
......@@ -481,6 +481,7 @@ enum aac_log_level {
#define FSAFS_NTC_FIB_CONTEXT 0x030c
struct aac_dev;
struct fib;
struct adapter_ops
{
......@@ -489,6 +490,7 @@ struct adapter_ops
void (*adapter_disable_int)(struct aac_dev *dev);
int (*adapter_sync_cmd)(struct aac_dev *dev, u32 command, u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4);
int (*adapter_check_health)(struct aac_dev *dev);
int (*adapter_send)(struct fib * fib);
};
/*
......@@ -659,6 +661,10 @@ struct rx_mu_registers {
Status Register */
__le32 OIMR; /* 1334h | 34h | Outbound Interrupt
Mask Register */
__le32 reserved2; /* 1338h | 38h | Reserved */
__le32 reserved3; /* 133Ch | 3Ch | Reserved */
__le32 InboundQueue;/* 1340h | 40h | Inbound Queue Port relative to firmware */
__le32 OutboundQueue;/*1344h | 44h | Outbound Queue Port relative to firmware */
/* * Must access through ATU Inbound
Translation Window */
};
......@@ -693,8 +699,8 @@ struct rx_inbound {
#define OutboundDoorbellReg MUnit.ODR
struct rx_registers {
struct rx_mu_registers MUnit; /* 1300h - 1334h */
__le32 reserved1[6]; /* 1338h - 134ch */
struct rx_mu_registers MUnit; /* 1300h - 1344h */
__le32 reserved1[2]; /* 1348h - 134ch */
struct rx_inbound IndexRegs;
};
......@@ -711,8 +717,8 @@ struct rx_registers {
#define rkt_inbound rx_inbound
struct rkt_registers {
struct rkt_mu_registers MUnit; /* 1300h - 1334h */
__le32 reserved1[1010]; /* 1338h - 22fch */
struct rkt_mu_registers MUnit; /* 1300h - 1344h */
__le32 reserved1[1006]; /* 1348h - 22fch */
struct rkt_inbound IndexRegs; /* 2300h - */
};
......@@ -721,8 +727,6 @@ struct rkt_registers {
#define rkt_writeb(AEP, CSR, value) writeb(value, &((AEP)->regs.rkt->CSR))
#define rkt_writel(AEP, CSR, value) writel(value, &((AEP)->regs.rkt->CSR))
struct fib;
typedef void (*fib_callback)(void *ctxt, struct fib *fibctx);
struct aac_fib_context {
......@@ -937,7 +941,6 @@ struct aac_dev
const char *name;
int id;
u16 irq_mask;
/*
* negotiated FIB settings
*/
......@@ -972,6 +975,7 @@ struct aac_dev
struct adapter_ops a_ops;
unsigned long fsrev; /* Main driver's revision number */
unsigned base_size; /* Size of mapped in region */
struct aac_init *init; /* Holds initialization info to communicate with adapter */
dma_addr_t init_pa; /* Holds physical address of the init struct */
......@@ -992,6 +996,9 @@ struct aac_dev
/*
* The following is the device specific extension.
*/
#if (!defined(AAC_MIN_FOOTPRINT_SIZE))
# define AAC_MIN_FOOTPRINT_SIZE 8192
#endif
union
{
struct sa_registers __iomem *sa;
......@@ -1012,6 +1019,7 @@ struct aac_dev
u8 nondasd_support;
u8 dac_support;
u8 raid_scsi_mode;
u8 new_comm_interface;
/* macro side-effects BEWARE */
# define raw_io_interface \
init->InitStructRevision==cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_4)
......@@ -1034,6 +1042,8 @@ struct aac_dev
#define aac_adapter_check_health(dev) \
(dev)->a_ops.adapter_check_health(dev)
#define aac_adapter_send(fib) \
((fib)->dev)->a_ops.adapter_send(fib)
#define FIB_CONTEXT_FLAG_TIMED_OUT (0x00000001)
......@@ -1779,6 +1789,7 @@ int aac_rkt_init(struct aac_dev *dev);
int aac_sa_init(struct aac_dev *dev);
unsigned int aac_response_normal(struct aac_queue * q);
unsigned int aac_command_normal(struct aac_queue * q);
unsigned int aac_intr_normal(struct aac_dev * dev, u32 Index);
int aac_command_thread(struct aac_dev * dev);
int aac_close_fib_context(struct aac_dev * dev, struct aac_fib_context *fibctx);
int fib_adapter_complete(struct fib * fibptr, unsigned short size);
......
......@@ -116,6 +116,10 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co
}
init->InitFlags = 0;
if (dev->new_comm_interface) {
init->InitFlags = cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED);
dprintk((KERN_WARNING"aacraid: New Comm Interface enabled\n"));
}
init->MaxIoCommands = cpu_to_le32(dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB);
init->MaxIoSize = cpu_to_le32(dev->scsi_host_ptr->max_sectors << 9);
init->MaxFibSize = cpu_to_le32(dev->max_fib_size);
......@@ -315,12 +319,33 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev)
- sizeof(struct aac_fibhdr)
- sizeof(struct aac_write) + sizeof(struct sgentry))
/ sizeof(struct sgentry);
dev->new_comm_interface = 0;
dev->raw_io_64 = 0;
if ((!aac_adapter_sync_cmd(dev, GET_ADAPTER_PROPERTIES,
0, 0, 0, 0, 0, 0, status+0, status+1, status+2, NULL, NULL)) &&
(status[0] == 0x00000001)) {
if (status[1] & AAC_OPT_NEW_COMM_64)
dev->raw_io_64 = 1;
if (status[1] & AAC_OPT_NEW_COMM)
dev->new_comm_interface = dev->a_ops.adapter_send != 0;
if (dev->new_comm_interface && (status[2] > dev->base_size)) {
iounmap(dev->regs.sa);
dev->base_size = status[2];
dprintk((KERN_DEBUG "ioremap(%lx,%d)\n",
host->base, status[2]));
dev->regs.sa = ioremap(host->base, status[2]);
if (dev->regs.sa == NULL) {
/* remap failed, go back ... */
dev->new_comm_interface = 0;
dev->regs.sa = ioremap(host->base,
AAC_MIN_FOOTPRINT_SIZE);
if (dev->regs.sa == NULL) {
printk(KERN_WARNING
"aacraid: unable to map adapter.\n");
return NULL;
}
}
}
}
if ((!aac_adapter_sync_cmd(dev, GET_COMM_PREFERRED_SETTINGS,
0, 0, 0, 0, 0, 0,
......
......@@ -212,7 +212,7 @@ void fib_init(struct fib *fibptr)
hw_fib->header.StructType = FIB_MAGIC;
hw_fib->header.Size = cpu_to_le16(fibptr->dev->max_fib_size);
hw_fib->header.XferState = cpu_to_le32(HostOwned | FibInitialized | FibEmpty | FastResponseCapable);
hw_fib->header.SenderFibAddress = cpu_to_le32(fibptr->hw_fib_pa);
hw_fib->header.SenderFibAddress = 0; /* Filled in later if needed */
hw_fib->header.ReceiverFibAddress = cpu_to_le32(fibptr->hw_fib_pa);
hw_fib->header.SenderSize = cpu_to_le16(fibptr->dev->max_fib_size);
}
......@@ -380,9 +380,7 @@ static int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_f
int fib_send(u16 command, struct fib * fibptr, unsigned long size, int priority, int wait, int reply, fib_callback callback, void * callback_data)
{
u32 index;
struct aac_dev * dev = fibptr->dev;
unsigned long nointr = 0;
struct hw_fib * hw_fib = fibptr->hw_fib;
struct aac_queue * q;
unsigned long flags = 0;
......@@ -417,7 +415,7 @@ int fib_send(u16 command, struct fib * fibptr, unsigned long size, int priority
* Map the fib into 32bits by using the fib number
*/
hw_fib->header.SenderFibAddress = cpu_to_le32(((u32)(fibptr-dev->fibs)) << 1);
hw_fib->header.SenderFibAddress = cpu_to_le32(((u32)(fibptr - dev->fibs)) << 2);
hw_fib->header.SenderData = (u32)(fibptr - dev->fibs);
/*
* Set FIB state to indicate where it came from and if we want a
......@@ -456,10 +454,10 @@ int fib_send(u16 command, struct fib * fibptr, unsigned long size, int priority
FIB_COUNTER_INCREMENT(aac_config.FibsSent);
dprintk((KERN_DEBUG "fib_send: inserting a queue entry at index %d.\n",index));
dprintk((KERN_DEBUG "Fib contents:.\n"));
dprintk((KERN_DEBUG " Command = %d.\n", hw_fib->header.Command));
dprintk((KERN_DEBUG " XferState = %x.\n", hw_fib->header.XferState));
dprintk((KERN_DEBUG " Command = %d.\n", le32_to_cpu(hw_fib->header.Command)));
dprintk((KERN_DEBUG " SubCommand = %d.\n", le32_to_cpu(((struct aac_query_mount *)fib_data(fibptr))->command)));
dprintk((KERN_DEBUG " XferState = %x.\n", le32_to_cpu(hw_fib->header.XferState)));
dprintk((KERN_DEBUG " hw_fib va being sent=%p\n",fibptr->hw_fib));
dprintk((KERN_DEBUG " hw_fib pa being sent=%lx\n",(ulong)fibptr->hw_fib_pa));
dprintk((KERN_DEBUG " fib being sent=%p\n",fibptr));
......@@ -469,14 +467,37 @@ int fib_send(u16 command, struct fib * fibptr, unsigned long size, int priority
if(wait)
spin_lock_irqsave(&fibptr->event_lock, flags);
spin_lock_irqsave(q->lock, qflags);
aac_queue_get( dev, &index, AdapNormCmdQueue, hw_fib, 1, fibptr, &nointr);
list_add_tail(&fibptr->queue, &q->pendingq);
q->numpending++;
*(q->headers.producer) = cpu_to_le32(index + 1);
spin_unlock_irqrestore(q->lock, qflags);
if (!(nointr & aac_config.irq_mod))
aac_adapter_notify(dev, AdapNormCmdQueue);
if (dev->new_comm_interface) {
unsigned long count = 10000000L; /* 50 seconds */
list_add_tail(&fibptr->queue, &q->pendingq);
q->numpending++;
spin_unlock_irqrestore(q->lock, qflags);
while (aac_adapter_send(fibptr) != 0) {
if (--count == 0) {
if (wait)
spin_unlock_irqrestore(&fibptr->event_lock, flags);
spin_lock_irqsave(q->lock, qflags);
q->numpending--;
list_del(&fibptr->queue);
spin_unlock_irqrestore(q->lock, qflags);
return -ETIMEDOUT;
}
udelay(5);
}
} else {
u32 index;
unsigned long nointr = 0;
aac_queue_get( dev, &index, AdapNormCmdQueue, hw_fib, 1, fibptr, &nointr);
list_add_tail(&fibptr->queue, &q->pendingq);
q->numpending++;
*(q->headers.producer) = cpu_to_le32(index + 1);
spin_unlock_irqrestore(q->lock, qflags);
dprintk((KERN_DEBUG "fib_send: inserting a queue entry at index %d.\n",index));
if (!(nointr & aac_config.irq_mod))
aac_adapter_notify(dev, AdapNormCmdQueue);
}
/*
* If the caller wanted us to wait for response wait now.
*/
......@@ -492,7 +513,6 @@ int fib_send(u16 command, struct fib * fibptr, unsigned long size, int priority
* hardware failure has occurred.
*/
unsigned long count = 36000000L; /* 3 minutes */
unsigned long qflags;
while (down_trylock(&fibptr->event_wait)) {
if (--count == 0) {
spin_lock_irqsave(q->lock, qflags);
......@@ -621,12 +641,16 @@ int fib_adapter_complete(struct fib * fibptr, unsigned short size)
unsigned long qflags;
if (hw_fib->header.XferState == 0) {
if (dev->new_comm_interface)
kfree (hw_fib);
return 0;
}
/*
* If we plan to do anything check the structure type first.
*/
if ( hw_fib->header.StructType != FIB_MAGIC ) {
if (dev->new_comm_interface)
kfree (hw_fib);
return -EINVAL;
}
/*
......@@ -637,21 +661,25 @@ int fib_adapter_complete(struct fib * fibptr, unsigned short size)
* send the completed cdb to the adapter.
*/
if (hw_fib->header.XferState & cpu_to_le32(SentFromAdapter)) {
u32 index;
hw_fib->header.XferState |= cpu_to_le32(HostProcessed);
if (size) {
size += sizeof(struct aac_fibhdr);
if (size > le16_to_cpu(hw_fib->header.SenderSize))
return -EMSGSIZE;
hw_fib->header.Size = cpu_to_le16(size);
if (dev->new_comm_interface) {
kfree (hw_fib);
} else {
u32 index;
hw_fib->header.XferState |= cpu_to_le32(HostProcessed);
if (size) {
size += sizeof(struct aac_fibhdr);
if (size > le16_to_cpu(hw_fib->header.SenderSize))
return -EMSGSIZE;
hw_fib->header.Size = cpu_to_le16(size);
}
q = &dev->queues->queue[AdapNormRespQueue];
spin_lock_irqsave(q->lock, qflags);
aac_queue_get(dev, &index, AdapNormRespQueue, hw_fib, 1, NULL, &nointr);
*(q->headers.producer) = cpu_to_le32(index + 1);
spin_unlock_irqrestore(q->lock, qflags);
if (!(nointr & (int)aac_config.irq_mod))
aac_adapter_notify(dev, AdapNormRespQueue);
}
q = &dev->queues->queue[AdapNormRespQueue];
spin_lock_irqsave(q->lock, qflags);
aac_queue_get(dev, &index, AdapNormRespQueue, hw_fib, 1, NULL, &nointr);
*(q->headers.producer) = cpu_to_le32(index + 1);
spin_unlock_irqrestore(q->lock, qflags);
if (!(nointr & (int)aac_config.irq_mod))
aac_adapter_notify(dev, AdapNormRespQueue);
}
else
{
......
......@@ -73,7 +73,7 @@ unsigned int aac_response_normal(struct aac_queue * q)
int fast;
u32 index = le32_to_cpu(entry->addr);
fast = index & 0x01;
fib = &dev->fibs[index >> 1];
fib = &dev->fibs[index >> 2];
hwfib = fib->hw_fib;
aac_consumer_free(dev, q, HostNormRespQueue);
......@@ -213,3 +213,116 @@ unsigned int aac_command_normal(struct aac_queue *q)
spin_unlock_irqrestore(q->lock, flags);
return 0;
}
/**
* aac_intr_normal - Handle command replies
* @dev: Device
* @index: completion reference
*
* This DPC routine will be run when the adapter interrupts us to let us
* know there is a response on our normal priority queue. We will pull off
* all QE there are and wake up all the waiters before exiting.
*/
unsigned int aac_intr_normal(struct aac_dev * dev, u32 Index)
{
u32 index = le32_to_cpu(Index);
dprintk((KERN_INFO "aac_intr_normal(%p,%x)\n", dev, Index));
if ((index & 0x00000002L)) {
struct hw_fib * hw_fib;
struct fib * fib;
struct aac_queue *q = &dev->queues->queue[HostNormCmdQueue];
unsigned long flags;
if (index == 0xFFFFFFFEL) /* Special Case */
return 0; /* Do nothing */
/*
* Allocate a FIB. For non queued stuff we can just use
* the stack so we are happy. We need a fib object in order to
* manage the linked lists.
*/
if ((!dev->aif_thread)
|| (!(fib = kmalloc(sizeof(struct fib),GFP_ATOMIC))))
return 1;
if (!(hw_fib = kmalloc(sizeof(struct hw_fib),GFP_ATOMIC))) {
kfree (fib);
return 1;
}
memset(hw_fib, 0, sizeof(struct hw_fib));
memcpy(hw_fib, (struct hw_fib *)(((unsigned long)(dev->regs.sa)) + (index & ~0x00000002L)), sizeof(struct hw_fib));
memset(fib, 0, sizeof(struct fib));
INIT_LIST_HEAD(&fib->fiblink);
fib->type = FSAFS_NTC_FIB_CONTEXT;
fib->size = sizeof(struct fib);
fib->hw_fib = hw_fib;
fib->data = hw_fib->data;
fib->dev = dev;
spin_lock_irqsave(q->lock, flags);
list_add_tail(&fib->fiblink, &q->cmdq);
wake_up_interruptible(&q->cmdready);
spin_unlock_irqrestore(q->lock, flags);
return 1;
} else {
int fast = index & 0x01;
struct fib * fib = &dev->fibs[index >> 2];
struct hw_fib * hwfib = fib->hw_fib;
/*
* Remove this fib from the Outstanding I/O queue.
* But only if it has not already been timed out.
*
* If the fib has been timed out already, then just
* continue. The caller has already been notified that
* the fib timed out.
*/
if ((fib->flags & FIB_CONTEXT_FLAG_TIMED_OUT)) {
printk(KERN_WARNING "aacraid: FIB timeout (%x).\n", fib->flags);
printk(KERN_DEBUG"aacraid: hwfib=%p index=%i fib=%p\n",hwfib, hwfib->header.SenderData,fib);
return 0;
}
list_del(&fib->queue);
dev->queues->queue[AdapNormCmdQueue].numpending--;
if (fast) {
/*
* Doctor the fib
*/
*(__le32 *)hwfib->data = cpu_to_le32(ST_OK);
hwfib->header.XferState |= cpu_to_le32(AdapterProcessed);
}
FIB_COUNTER_INCREMENT(aac_config.FibRecved);
if (hwfib->header.Command == cpu_to_le16(NuFileSystem))
{
u32 *pstatus = (u32 *)hwfib->data;
if (*pstatus & cpu_to_le32(0xffff0000))
*pstatus = cpu_to_le32(ST_OK);
}
if (hwfib->header.XferState & cpu_to_le32(NoResponseExpected | Async))
{
if (hwfib->header.XferState & cpu_to_le32(NoResponseExpected))
FIB_COUNTER_INCREMENT(aac_config.NoResponseRecved);
else
FIB_COUNTER_INCREMENT(aac_config.AsyncRecved);
/*
* NOTE: we cannot touch the fib after this
* call, because it may have been deallocated.
*/
fib->callback(fib->callback_data, fib);
} else {
unsigned long flagv;
dprintk((KERN_INFO "event_wait up\n"));
spin_lock_irqsave(&fib->event_lock, flagv);
fib->done = 1;
up(&fib->event_wait);
spin_unlock_irqrestore(&fib->event_lock, flagv);
FIB_COUNTER_INCREMENT(aac_config.NormalRecved);
}
return 0;
}
}
......@@ -788,8 +788,29 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
goto out_free_host;
spin_lock_init(&aac->fib_lock);
if ((*aac_drivers[index].init)(aac))
/*
* Map in the registers from the adapter.
*/
aac->base_size = AAC_MIN_FOOTPRINT_SIZE;
if ((aac->regs.sa = ioremap(
(unsigned long)aac->scsi_host_ptr->base, AAC_MIN_FOOTPRINT_SIZE))
== NULL) {
printk(KERN_WARNING "%s: unable to map adapter.\n",
AAC_DRIVERNAME);
goto out_free_fibs;
}
if ((*aac_drivers[index].init)(aac))
goto out_unmap;
/*
* Start any kernel threads needed
*/
aac->thread_pid = kernel_thread((int (*)(void *))aac_command_thread,
aac, 0);
if (aac->thread_pid < 0) {
printk(KERN_ERR "aacraid: Unable to create command thread.\n");
goto out_deinit;
}
/*
* If we had set a smaller DMA mask earlier, set it to 4gig
......@@ -866,10 +887,11 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
aac_send_shutdown(aac);
aac_adapter_disable_int(aac);
free_irq(pdev->irq, aac);
out_unmap:
fib_map_free(aac);
pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr, aac->comm_phys);
kfree(aac->queues);
free_irq(pdev->irq, aac);
iounmap(aac->regs.sa);
out_free_fibs:
kfree(aac->fibs);
......@@ -910,6 +932,7 @@ static void __devexit aac_remove_one(struct pci_dev *pdev)
iounmap(aac->regs.sa);
kfree(aac->fibs);
kfree(aac->fsa_dev);
list_del(&aac->entry);
scsi_host_put(shost);
......
......@@ -49,40 +49,57 @@
static irqreturn_t aac_rkt_intr(int irq, void *dev_id, struct pt_regs *regs)
{
struct aac_dev *dev = dev_id;
unsigned long bellbits;
u8 intstat, mask;
intstat = rkt_readb(dev, MUnit.OISR);
/*
* Read mask and invert because drawbridge is reversed.
* This allows us to only service interrupts that have
* been enabled.
*/
mask = ~(dev->OIMR);
/* Check to see if this is our interrupt. If it isn't just return */
if (intstat & mask)
{
bellbits = rkt_readl(dev, OutboundDoorbellReg);
if (bellbits & DoorBellPrintfReady) {
aac_printf(dev, rkt_readl(dev, IndexRegs.Mailbox[5]));
rkt_writel(dev, MUnit.ODR,DoorBellPrintfReady);
rkt_writel(dev, InboundDoorbellReg,DoorBellPrintfDone);
}
else if (bellbits & DoorBellAdapterNormCmdReady) {
rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
aac_command_normal(&dev->queues->queue[HostNormCmdQueue]);
}
else if (bellbits & DoorBellAdapterNormRespReady) {
aac_response_normal(&dev->queues->queue[HostNormRespQueue]);
rkt_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady);
}
else if (bellbits & DoorBellAdapterNormCmdNotFull) {
rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
if (dev->new_comm_interface) {
u32 Index = rkt_readl(dev, MUnit.OutboundQueue);
if (Index == 0xFFFFFFFFL)
Index = rkt_readl(dev, MUnit.OutboundQueue);
if (Index != 0xFFFFFFFFL) {
do {
if (aac_intr_normal(dev, Index)) {
rkt_writel(dev, MUnit.OutboundQueue, Index);
rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormRespReady);
}
Index = rkt_readl(dev, MUnit.OutboundQueue);
} while (Index != 0xFFFFFFFFL);
return IRQ_HANDLED;
}
else if (bellbits & DoorBellAdapterNormRespNotFull) {
rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull);
} else {
unsigned long bellbits;
u8 intstat;
intstat = rkt_readb(dev, MUnit.OISR);
/*
* Read mask and invert because drawbridge is reversed.
* This allows us to only service interrupts that have
* been enabled.
* Check to see if this is our interrupt. If it isn't just return
*/
if (intstat & ~(dev->OIMR))
{
bellbits = rkt_readl(dev, OutboundDoorbellReg);
if (bellbits & DoorBellPrintfReady) {
aac_printf(dev, rkt_readl (dev, IndexRegs.Mailbox[5]));
rkt_writel(dev, MUnit.ODR,DoorBellPrintfReady);
rkt_writel(dev, InboundDoorbellReg,DoorBellPrintfDone);
}
else if (bellbits & DoorBellAdapterNormCmdReady) {
rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
aac_command_normal(&dev->queues->queue[HostNormCmdQueue]);
// rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
}
else if (bellbits & DoorBellAdapterNormRespReady) {
rkt_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady);
aac_response_normal(&dev->queues->queue[HostNormRespQueue]);
}
else if (bellbits & DoorBellAdapterNormCmdNotFull) {
rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
}
else if (bellbits & DoorBellAdapterNormRespNotFull) {
rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull);
}
return IRQ_HANDLED;
}
return IRQ_HANDLED;
}
return IRQ_NONE;
}
......@@ -173,7 +190,10 @@ static int rkt_sync_cmd(struct aac_dev *dev, u32 command,
/*
* Restore interrupt mask even though we timed out
*/
rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
if (dev->new_comm_interface)
rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
else
rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
return -ETIMEDOUT;
}
/*
......@@ -196,7 +216,10 @@ static int rkt_sync_cmd(struct aac_dev *dev, u32 command,
/*
* Restore interrupt mask
*/
rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
if (dev->new_comm_interface)
rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
else
rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
return 0;
}
......@@ -268,15 +291,6 @@ static void aac_rkt_start_adapter(struct aac_dev *dev)
init = dev->init;
init->HostElapsedSeconds = cpu_to_le32(get_seconds());
/*
* First clear out all interrupts. Then enable the one's that we
* can handle.
*/
rkt_writeb(dev, MUnit.OIMR, 0xff);
rkt_writel(dev, MUnit.ODR, 0xffffffff);
// rkt_writeb(dev, MUnit.OIMR, ~(u8)OUTBOUND_DOORBELL_INTERRUPT_MASK);
rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
// We can only use a 32 bit address here
rkt_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa,
0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
......@@ -349,6 +363,39 @@ static int aac_rkt_check_health(struct aac_dev *dev)
return 0;
}
/**
* aac_rkt_send
* @fib: fib to issue
*
* Will send a fib, returning 0 if successful.
*/
static int aac_rkt_send(struct fib * fib)
{
u64 addr = fib->hw_fib_pa;
struct aac_dev *dev = fib->dev;
volatile void __iomem *device = dev->regs.rkt;
u32 Index;
dprintk((KERN_DEBUG "%p->aac_rkt_send(%p->%llx)\n", dev, fib, addr));
Index = rkt_readl(dev, MUnit.InboundQueue);
if (Index == 0xFFFFFFFFL)
Index = rkt_readl(dev, MUnit.InboundQueue);
dprintk((KERN_DEBUG "Index = 0x%x\n", Index));
if (Index == 0xFFFFFFFFL)
return Index;
device += Index;
dprintk((KERN_DEBUG "entry = %x %x %u\n", (u32)(addr & 0xffffffff),
(u32)(addr >> 32), (u32)le16_to_cpu(fib->hw_fib->header.Size)));
writel((u32)(addr & 0xffffffff), device);
device += sizeof(u32);
writel((u32)(addr >> 32), device);
device += sizeof(u32);
writel(le16_to_cpu(fib->hw_fib->header.Size), device);
rkt_writel(dev, MUnit.InboundQueue, Index);
dprintk((KERN_DEBUG "aac_rkt_send - return 0\n"));
return 0;
}
/**
* aac_rkt_init - initialize an i960 based AAC card
* @dev: device to configure
......@@ -369,13 +416,8 @@ int aac_rkt_init(struct aac_dev *dev)
name = dev->name;
/*
* Map in the registers from the adapter.
* Check to see if the board panic'd while booting.
*/
if((dev->regs.rkt = ioremap((unsigned long)dev->scsi_host_ptr->base, 8192))==NULL)
{
printk(KERN_WARNING "aacraid: unable to map i960.\n" );
goto error_iounmap;
}
/*
* Check to see if the board failed any self tests.
*/
......@@ -426,6 +468,7 @@ int aac_rkt_init(struct aac_dev *dev)
dev->a_ops.adapter_notify = aac_rkt_notify_adapter;
dev->a_ops.adapter_sync_cmd = rkt_sync_cmd;
dev->a_ops.adapter_check_health = aac_rkt_check_health;
dev->a_ops.adapter_send = aac_rkt_send;
/*
* First clear out all interrupts. Then enable the one's that we
......@@ -437,15 +480,24 @@ int aac_rkt_init(struct aac_dev *dev)
if (aac_init_adapter(dev) == NULL)
goto error_irq;
/*
* Start any kernel threads needed
*/
dev->thread_pid = kernel_thread((int (*)(void *))aac_command_thread, dev, 0);
if(dev->thread_pid < 0)
{
printk(KERN_ERR "aacraid: Unable to create rkt thread.\n");
goto error_kfree;
}
if (dev->new_comm_interface) {
/*
* FIB Setup has already been done, but we can minimize the
* damage by at least ensuring the OS never issues more
* commands than we can handle. The Rocket adapters currently
* can only handle 246 commands and 8 AIFs at the same time,
* and in fact do notify us accordingly if we negotiate the
* FIB size. The problem that causes us to add this check is
* to ensure that we do not overdo it with the adapter when a
* hard coded FIB override is being utilized. This special
* case warrants this half baked, but convenient, check here.
*/
if (dev->scsi_host_ptr->can_queue > (246 - AAC_NUM_MGT_FIB)) {
dev->init->MaxIoCommands = cpu_to_le32(246);
dev->scsi_host_ptr->can_queue = 246 - AAC_NUM_MGT_FIB;
}
rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
}
/*
* Tell the adapter that all is configured, and it can start
* accepting requests
......@@ -453,15 +505,11 @@ int aac_rkt_init(struct aac_dev *dev)
aac_rkt_start_adapter(dev);
return 0;
error_kfree:
kfree(dev->queues);
error_irq:
rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff);
free_irq(dev->scsi_host_ptr->irq, (void *)dev);
error_iounmap:
iounmap(dev->regs.rkt);
return -1;
}
......@@ -49,40 +49,57 @@
static irqreturn_t aac_rx_intr(int irq, void *dev_id, struct pt_regs *regs)
{
struct aac_dev *dev = dev_id;
unsigned long bellbits;
u8 intstat, mask;
intstat = rx_readb(dev, MUnit.OISR);
/*
* Read mask and invert because drawbridge is reversed.
* This allows us to only service interrupts that have
* been enabled.
*/
mask = ~(dev->OIMR);
/* Check to see if this is our interrupt. If it isn't just return */
if (intstat & mask)
{
bellbits = rx_readl(dev, OutboundDoorbellReg);
if (bellbits & DoorBellPrintfReady) {
aac_printf(dev, rx_readl(dev, IndexRegs.Mailbox[5]));
rx_writel(dev, MUnit.ODR,DoorBellPrintfReady);
rx_writel(dev, InboundDoorbellReg,DoorBellPrintfDone);
}
else if (bellbits & DoorBellAdapterNormCmdReady) {
rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
aac_command_normal(&dev->queues->queue[HostNormCmdQueue]);
}
else if (bellbits & DoorBellAdapterNormRespReady) {
aac_response_normal(&dev->queues->queue[HostNormRespQueue]);
rx_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady);
}
else if (bellbits & DoorBellAdapterNormCmdNotFull) {
rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
dprintk((KERN_DEBUG "aac_rx_intr(%d,%p,%p)\n", irq, dev_id, regs));
if (dev->new_comm_interface) {
u32 Index = rx_readl(dev, MUnit.OutboundQueue);
if (Index == 0xFFFFFFFFL)
Index = rx_readl(dev, MUnit.OutboundQueue);
if (Index != 0xFFFFFFFFL) {
do {
if (aac_intr_normal(dev, Index)) {
rx_writel(dev, MUnit.OutboundQueue, Index);
rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespReady);
}
Index = rx_readl(dev, MUnit.OutboundQueue);
} while (Index != 0xFFFFFFFFL);
return IRQ_HANDLED;
}
else if (bellbits & DoorBellAdapterNormRespNotFull) {
rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull);
} else {
unsigned long bellbits;
u8 intstat;
intstat = rx_readb(dev, MUnit.OISR);
/*
* Read mask and invert because drawbridge is reversed.
* This allows us to only service interrupts that have
* been enabled.
* Check to see if this is our interrupt. If it isn't just return
*/
if (intstat & ~(dev->OIMR))
{
bellbits = rx_readl(dev, OutboundDoorbellReg);
if (bellbits & DoorBellPrintfReady) {
aac_printf(dev, rx_readl (dev, IndexRegs.Mailbox[5]));
rx_writel(dev, MUnit.ODR,DoorBellPrintfReady);
rx_writel(dev, InboundDoorbellReg,DoorBellPrintfDone);
}
else if (bellbits & DoorBellAdapterNormCmdReady) {
rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
aac_command_normal(&dev->queues->queue[HostNormCmdQueue]);
}
else if (bellbits & DoorBellAdapterNormRespReady) {
rx_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady);
aac_response_normal(&dev->queues->queue[HostNormRespQueue]);
}
else if (bellbits & DoorBellAdapterNormCmdNotFull) {
rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
}
else if (bellbits & DoorBellAdapterNormRespNotFull) {
rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull);
}
return IRQ_HANDLED;
}
return IRQ_HANDLED;
}
return IRQ_NONE;
}
......@@ -173,7 +190,10 @@ static int rx_sync_cmd(struct aac_dev *dev, u32 command,
/*
* Restore interrupt mask even though we timed out
*/
rx_writeb(dev, MUnit.OIMR, dev->OIMR &= 0xfb);
if (dev->new_comm_interface)
rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
else
rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
return -ETIMEDOUT;
}
/*
......@@ -196,7 +216,10 @@ static int rx_sync_cmd(struct aac_dev *dev, u32 command,
/*
* Restore interrupt mask
*/
rx_writeb(dev, MUnit.OIMR, dev->OIMR &= 0xfb);
if (dev->new_comm_interface)
rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
else
rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
return 0;
}
......@@ -267,15 +290,6 @@ static void aac_rx_start_adapter(struct aac_dev *dev)
init = dev->init;
init->HostElapsedSeconds = cpu_to_le32(get_seconds());
/*
* First clear out all interrupts. Then enable the one's that we
* can handle.
*/
rx_writeb(dev, MUnit.OIMR, 0xff);
rx_writel(dev, MUnit.ODR, 0xffffffff);
// rx_writeb(dev, MUnit.OIMR, ~(u8)OUTBOUND_DOORBELL_INTERRUPT_MASK);
rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
// We can only use a 32 bit address here
rx_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa,
0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
......@@ -348,6 +362,39 @@ static int aac_rx_check_health(struct aac_dev *dev)
return 0;
}
/**
* aac_rx_send
* @fib: fib to issue
*
* Will send a fib, returning 0 if successful.
*/
static int aac_rx_send(struct fib * fib)
{
u64 addr = fib->hw_fib_pa;
struct aac_dev *dev = fib->dev;
volatile void __iomem *device = dev->regs.rx;
u32 Index;
dprintk((KERN_DEBUG "%p->aac_rx_send(%p->%llx)\n", dev, fib, addr));
Index = rx_readl(dev, MUnit.InboundQueue);
if (Index == 0xFFFFFFFFL)
Index = rx_readl(dev, MUnit.InboundQueue);
dprintk((KERN_DEBUG "Index = 0x%x\n", Index));
if (Index == 0xFFFFFFFFL)
return Index;
device += Index;
dprintk((KERN_DEBUG "entry = %x %x %u\n", (u32)(addr & 0xffffffff),
(u32)(addr >> 32), (u32)le16_to_cpu(fib->hw_fib->header.Size)));
writel((u32)(addr & 0xffffffff), device);
device += sizeof(u32);
writel((u32)(addr >> 32), device);
device += sizeof(u32);
writel(le16_to_cpu(fib->hw_fib->header.Size), device);
rx_writel(dev, MUnit.InboundQueue, Index);
dprintk((KERN_DEBUG "aac_rx_send - return 0\n"));
return 0;
}
/**
* aac_rx_init - initialize an i960 based AAC card
* @dev: device to configure
......@@ -368,13 +415,8 @@ int aac_rx_init(struct aac_dev *dev)
name = dev->name;
/*
* Map in the registers from the adapter.
* Check to see if the board panic'd while booting.
*/
if((dev->regs.rx = ioremap((unsigned long)dev->scsi_host_ptr->base, 8192))==NULL)
{
printk(KERN_WARNING "aacraid: unable to map i960.\n" );
return -1;
}
/*
* Check to see if the board failed any self tests.
*/
......@@ -426,6 +468,7 @@ int aac_rx_init(struct aac_dev *dev)
dev->a_ops.adapter_notify = aac_rx_notify_adapter;
dev->a_ops.adapter_sync_cmd = rx_sync_cmd;
dev->a_ops.adapter_check_health = aac_rx_check_health;
dev->a_ops.adapter_send = aac_rx_send;
/*
* First clear out all interrupts. Then enable the one's that we
......@@ -437,15 +480,9 @@ int aac_rx_init(struct aac_dev *dev)
if (aac_init_adapter(dev) == NULL)
goto error_irq;
/*
* Start any kernel threads needed
*/
dev->thread_pid = kernel_thread((int (*)(void *))aac_command_thread, dev, 0);
if(dev->thread_pid < 0)
{
printk(KERN_ERR "aacraid: Unable to create rx thread.\n");
goto error_kfree;
}
if (dev->new_comm_interface)
rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
/*
* Tell the adapter that all is configured, and it can start
* accepting requests
......@@ -453,15 +490,11 @@ int aac_rx_init(struct aac_dev *dev)
aac_rx_start_adapter(dev);
return 0;
error_kfree:
kfree(dev->queues);
error_irq:
rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff);
free_irq(dev->scsi_host_ptr->irq, (void *)dev);
error_iounmap:
iounmap(dev->regs.rx);
return -1;
}
......@@ -237,29 +237,16 @@ static void aac_sa_interrupt_adapter (struct aac_dev *dev)
static void aac_sa_start_adapter(struct aac_dev *dev)
{
u32 ret;
struct aac_init *init;
/*
* Fill in the remaining pieces of the init.
*/
init = dev->init;
init->HostElapsedSeconds = cpu_to_le32(get_seconds());
/*
* Tell the adapter we are back and up and running so it will scan its command
* queues and enable our interrupts
*/
dev->irq_mask = (PrintfReady | DOORBELL_1 | DOORBELL_2 | DOORBELL_3 | DOORBELL_4);
/*
* First clear out all interrupts. Then enable the one's that
* we can handle.
*/
sa_writew(dev, SaDbCSR.PRISETIRQMASK, 0xffff);
sa_writew(dev, SaDbCSR.PRICLEARIRQMASK, (PrintfReady | DOORBELL_1 | DOORBELL_2 | DOORBELL_3 | DOORBELL_4));
/* We can only use a 32 bit address here */
sa_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS,
(u32)(ulong)dev->init_pa, 0, 0, 0, 0, 0,
&ret, NULL, NULL, NULL, NULL);
NULL, NULL, NULL, NULL, NULL);
}
/**
......@@ -313,15 +300,6 @@ int aac_sa_init(struct aac_dev *dev)
instance = dev->id;
name = dev->name;
/*
* Map in the registers from the adapter.
*/
if((dev->regs.sa = ioremap((unsigned long)dev->scsi_host_ptr->base, 8192))==NULL)
{
printk(KERN_WARNING "aacraid: unable to map ARM.\n" );
goto error_iounmap;
}
/*
* Check to see if the board failed any self tests.
*/
......@@ -377,15 +355,6 @@ int aac_sa_init(struct aac_dev *dev)
if(aac_init_adapter(dev) == NULL)
goto error_irq;
/*
* Start any kernel threads needed
*/
dev->thread_pid = kernel_thread((int (*)(void *))aac_command_thread, dev, 0);
if (dev->thread_pid < 0) {
printk(KERN_ERR "aacraid: Unable to create command thread.\n");
goto error_kfree;
}
/*
* Tell the adapter that all is configure, and it can start
* accepting requests
......@@ -393,16 +362,11 @@ int aac_sa_init(struct aac_dev *dev)
aac_sa_start_adapter(dev);
return 0;
error_kfree:
kfree(dev->queues);
error_irq:
sa_writew(dev, SaDbCSR.PRISETIRQMASK, 0xffff);
free_irq(dev->scsi_host_ptr->irq, (void *)dev);
error_iounmap:
iounmap(dev->regs.sa);
return -1;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册