- 18 10月, 2008 18 次提交
-
-
由 Alan Stern 提交于
This patch (as1131) implements the set_wedge() method for dummy_hcd. This method is necessary for strict USBCV compliance in g_file_storage. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
This reorders the list of USB peripheral controller drivers so it's more common for the initial (default) value to be relevant: put the SOC integrated silicon up front, discrete stuff last. Alphabetize. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Marc Zyngier 提交于
[This version fixes a thinko in the r8a66597 driver] This patch let a few discrete USB host controllers drivers (isp116x-hcd, r8a66597-hcd and sl811-hcd) obtain IRQ flags from their IORESOURCE_IRQ resource if configured as such, much like it's been done for the smc91x driver. It spares people writing support for specific boards the burden to configure the interrupt controller independantly, and keeps all IRQ related information in a single resource. HCD that are integrally part of a SoC have been left aside, as there is probably no "wiring" options... Tested on an Xscale PXA-255 based platform with isp116x-hcd. Signed-off-by: NMarc Zyngier <marc.zyngier@altran.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pete Zaitcev 提交于
Remove forgotten code related to sg_stat[]. Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
this extends the poisoning concept to anchors. This way poisoning will work with fire and forget drivers. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
looking at usb_kill_urb() it seems to me that it is unnecessarily lenient. In the use case of disconnect() you never want to use the URB again (for the same device) But leaving urb->reject elevated will make it easier to avoid races between read/write and disconnect. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Julia Lawall 提交于
In this code, it is possible to tell statically whether usblp will be NULL in the error handling code. Oliver Neukum suggested to make a goto to the final return rather than return directly. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ identifier f,err,l,l1; type T; expression x,E; statement S; @@ x = NULL ... when != goto l1; * x = f(...) ... when != x err = E; goto l; ... * if (x != NULL) S return err; // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This driver was originaly written by Stefan Kopp, but massively reworked by Greg for submission. Thanks to Felipe Balbi <me@felipebalbi.com> for lots of work in cleaning up this driver. Thanks to Oliver Neukum <oliver@neukum.org> for reviewing previous versions and pointing out problems. Cc: Stefan Kopp <stefan_kopp@agilent.com> Cc: Marcel Janssen <korgull@home.nl> Cc: Felipe Balbi <me@felipebalbi.com> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Harrison Metzger 提交于
Added basic support for a Delcom USB 7-segment LED Display Signed-off by: Harrison Metzger <harrisonmetz@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Vladimir Vukicevic 提交于
Add Oceanic PID to ftdi_sio driver Oceanic dive computers (such as the VT3 -- http://www.oceanicworldwide.com/p_computers_vt3.html) all use an onboard FTDI serial converter, with the FTDI vid and a PID of 0xf460. The attached patch adds that pid to ftdi_sio; driver connects to my VT3 after that. Signed-off-by: NVladimir Vukicevic <vladimir@pobox.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Denis Joseph Barrow 提交于
Remove duplicate device ids which are now supported by drivers/usb/net/hso.c Signed-off-by: NDenis Joseph Barrow <D.Barow@option.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dan Williams 提交于
Add a few more mobile broadband cards. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (25 commits) staging: at76_usb wireless driver Staging: workaround build system bug Staging: Lindent sxg.c Staging: SLICOSS: Call pci_release_regions at driver exit Staging: SLICOSS: Fix remaining type names Staging: SLICOSS: Fix warnings due to static usage Staging: SLICOSS: lots of checkpatch fixes Staging: go7007 v4l fixes Staging: Fix gcc warnings in sxg Staging: add echo cancelation module Staging: add wlan-ng prism2 usb driver Staging: add w35und wifi driver Staging: USB/IP: add host driver Staging: USB/IP: add client driver Staging: USB/IP: add common functions needed Staging: add the go7007 video driver Staging: add me4000 pci data collection driver Staging: add me4000 firmware files Staging: add sxg network driver Staging: add Alacritech slicoss network driver ... Fixed up conflicts due to taint flags changes and MAINTAINERS cleanup in MAINTAINERS, include/linux/kernel.h and kernel/panic.c.
-
git://jdelvare.pck.nerim.net/jdelvare-2.6由 Linus Torvalds 提交于
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (47 commits) hwmon: (adm1026) Prevent log spamming hwmon: (adm1026) Fix debug messages hwmon: (adm1029) Use mask for fan_div value hwmon: (adt7470) Add documentation hwmon: (ibmaem) Automatically load on IBM systems via DMI hwmon: (ibmpex) Automatically load on IBM systems via DMI hwmon: (w83781d) Use new style driver binding hwmon: (w83781d) Stop abusing struct i2c_client for ISA devices hwmon: (w83781d) Make ISA interface depend on CONFIG_ISA hwmon: (w83781d) Additional information about AS99127F PWM hwmon: (w83781d) Detect alias chips hwmon: (w83781d) Refactor beep enable handling hwmon: Drop dead links to old National Semiconductor chip datasheets hwmon: (w83791d) add support for thermal cruise mode hwmon: (w83791d) add pwm_enable support hwmon: (w83791d) add manual PWM support hwmon: (w83791d) fan 4/5 pins can also be used for gpio hwmon: (max1619) Use inline functions instead of macros hwmon: (it87) Fix thermal sensor type values hwmon: (lm78) Convert to a new-style i2c driver ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: Fix debugfs_create_dir's error checking method for sound/soc/ ALSA: ASoC: Convert playpaq_wm8510 to bulk route registration API ALSA: kernel docs: fix sound/core/ kernel-doc ALSA: Handle NULL jacks in snd_jack_report() ALSA: hda - Fix PCM type of Nvidia HDMI devices
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: remove __generic_unplug_device() from exports block: move q->unplug_work initialization blktrace: pass zfcp driver data blktrace: add support for driver data block: fix current kernel-doc warnings block: only call ->request_fn when the queue is not stopped block: simplify string handling in elv_iosched_store() block: fix kernel-doc for blk_alloc_devt() block: fix nr_phys_segments miscalculation bug block: add partition attribute for partition number block: add BIG FAT WARNING to CONFIG_DEBUG_BLOCK_EXT_DEVT softirq: Add support for triggering softirq work on softirqs.
-
git://www.jni.nu/cris由 Linus Torvalds 提交于
* 'for-linus' of git://www.jni.nu/cris: CRIS: proper defconfig setup [CRIS] Rename boot-linkscripts and fix the path to them.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (39 commits) [SCSI] sd: fix compile failure with CONFIG_BLK_DEV_INTEGRITY=n libiscsi: fix locking in iscsi_eh_device_reset libiscsi: check reason why we are stopping iscsi session to determine error value [SCSI] iscsi_tcp: return a descriptive error value during connection errors [SCSI] libiscsi: rename host reset to target reset [SCSI] iscsi class: fix endpoint id handling [SCSI] libiscsi: Support drivers initiating session removal [SCSI] libiscsi: fix data corruption when target has to resend data-in packets [SCSI] sd: Switch kernel printing level for DIF messages [SCSI] sd: Correctly handle all combinations of DIF and DIX [SCSI] sd: Always print actual protection_type [SCSI] sd: Issue correct protection operation [SCSI] scsi_error: fix target reset handling [SCSI] lpfc 8.2.8 v2 : Add statistical reporting control and additional fc vendor events [SCSI] lpfc 8.2.8 v2 : Add sysfs control of target queue depth handling [SCSI] lpfc 8.2.8 v2 : Revert target busy in favor of transport disrupted [SCSI] scsi_dh_alua: remove REQ_NOMERGE [SCSI] lpfc 8.2.8 : update driver version to 8.2.8 [SCSI] lpfc 8.2.8 : Add MSI-X support [SCSI] lpfc 8.2.8 : Update driver to use new Host byte error code DID_TRANSPORT_DISRUPTED ...
-
- 17 10月, 2008 22 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net: Remove CONFIG_KMOD from net/ (towards removing CONFIG_KMOD entirely) ipv4: Add a missing rcu_assign_pointer() in routing cache. [netdrvr] ibmtr: PCMCIA IBMTR is ok on 64bit xen-netfront: Avoid unaligned accesses to IP header lmc: copy_*_user under spinlock [netdrvr] myri10ge, ixgbe: remove broken select INTEL_IOATDMA
-
由 Jean Delvare 提交于
When debugging is enabled, the adm1026 driver currently logs the message "Setting VID from GPIO11-15" 108 times each time you run "sensors". Once should be enough. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Philip Pokorny <ppokorny@penguincomputing.com>
-
由 Jean Delvare 提交于
* Add missing new-line to one debug message. * Remove leading colon from 3 debug messages. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Philip Pokorny <ppokorny@penguincomputing.com>
-
由 Corentin Labbe 提交于
This is my patch for testing correct values of fan div in adm1029 and prevent a division by 0 for some (unlikely) register values. Signed-off-by: NCorentin Labbe <corentin.labbe@geomatys.fr> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Darrick J. Wong 提交于
Add at least the bare minimum of documentation for this chip. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Darrick J. Wong 提交于
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Darrick J. Wong 提交于
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Wolfgang Grandegger 提交于
This patch modifies the w83781d driver to use new style driver binding. Substantial code modifications are required to deal with the new interface, especially legacy device detection. [JD: largely edited to make the patch smaller and to get the driver to work again on ISA devices.] Signed-off-by: NWolfgang Grandegger <wg@grandegger.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Upcoming changes to the I2C part of the w83781d driver will cause ISA devices to no longer have a struct i2c_client at hand. So, we must stop (ab)using it now. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Wolfgang Grandegger <wg@grandegger.com>
-
由 Wolfgang Grandegger 提交于
Probing the ISA bus on systems without ISA bus may hang the system. This patch makes the ISA bus related code depend on the kernel configuration parameter CONFIG_ISA. It moves ISA bus related code into one #ifdef CONFIG_ISA ... #endif block and adds some helper function. Signed-off-by: NWolfgang Grandegger <wg@grandegger.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
This information was provided in lm-sensors ticket #2350: http://www.lm-sensors.org/ticket/2350 This is IMHO still not enough to be able to safely implement fan control support for the AS99127F, but this is valuable information so I am adding it to the documentation. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
The W83781D and W83782D can be accessed either on the I2C bus or the ISA bus. We must not access the same chip through both interfaces. So far we were relying on the user passing the correct ignore parameter to skip the registration of the I2C interface as suggested by sensors-detect, but this is fragile: the user may load the w83781d driver without running sensors-detect, and the i2c bus numbers are not stable across reboots and hardware changes. So, better detect alias chips in the driver directly, and skip any I2C chip which is obviously an alias of the ISA chip. This is done by comparing the value of 26 selected registers. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Wolfgang Grandegger <wg@grandegger.com>
-
由 Jean Delvare 提交于
We can handle the beep enable bit as any other beep mask bit for slightly smaller code. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Wolfgang Grandegger <wg@grandegger.com>
-
由 Jean Delvare 提交于
Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Marc Hulsman 提交于
Add support to set target temperature and tolerance for thermal cruise mode. Signed-off-by: NMarc Hulsman <m.hulsman@tudelft.nl> Acked-by: NHans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Marc Hulsman 提交于
Add support for pwm_enable. Signed-off-by: NMarc Hulsman <m.hulsman@tudelft.nl> Acked-by: NHans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Marc Hulsman 提交于
Add PWM manual control. Signed-off-by: NMarc Hulsman <m.hulsman@tudelft.nl> Acked-by: NHans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Marc Hulsman 提交于
Pins fan/pwm 4-5 can be in use as GPIO. If that is the case, do not create their sysfs-interface. Signed-off-by: NMarc Hulsman <m.hulsman@tudelft.nl> Acked-by: NHans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Andrew Morton 提交于
Macros evaluating their arguments more than once are evil. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
The it87 driver doesn't follow the standard sensor type values as documented in Documentation/hwmon/sysfs-interface. It uses value 2 for thermistors instead of value 4. This causes "sensors" to tell the user that the chip is setup for a transistor while it is actually setup for a thermistor. Using value 4 for thermistors solves the problem. For compatibility reasons, we still accept value 2 but emit a warning message so that users update their configuration files. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NHans de Goede <hdegoede@redhat.com>
-
由 Jean Delvare 提交于
The new-style lm78 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Upcoming changes to the I2C part of the lm78 driver will cause ISA devices to no longer have a struct i2c_client at hand. So, we must stop (ab)using it now. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-