提交 5b775f67 编写于 作者: G Greg Kroah-Hartman

USB: add USB test and measurement class driver

This driver was originaly written by Stefan Kopp, but massively
reworked by Greg for submission.

Thanks to Felipe Balbi <me@felipebalbi.com> for lots of work in cleaning
up this driver.

Thanks to Oliver Neukum <oliver@neukum.org> for reviewing previous
versions and pointing out problems.


Cc: Stefan Kopp <stefan_kopp@agilent.com>
Cc: Marcel Janssen <korgull@home.nl>
Cc: Felipe Balbi <me@felipebalbi.com>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 eb86be54
What: /sys/bus/usb/drivers/usbtmc/devices/*/interface_capabilities
What: /sys/bus/usb/drivers/usbtmc/devices/*/device_capabilities
Date: August 2008
Contact: Greg Kroah-Hartman <gregkh@suse.de>
Description:
These files show the various USB TMC capabilities as described
by the device itself. The full description of the bitfields
can be found in the USB TMC documents from the USB-IF entitled
"Universal Serial Bus Test and Measurement Class Specification
(USBTMC) Revision 1.0" section 4.2.1.8.
The files are read only.
What: /sys/bus/usb/drivers/usbtmc/devices/*/usb488_interface_capabilities
What: /sys/bus/usb/drivers/usbtmc/devices/*/usb488_device_capabilities
Date: August 2008
Contact: Greg Kroah-Hartman <gregkh@suse.de>
Description:
These files show the various USB TMC capabilities as described
by the device itself. The full description of the bitfields
can be found in the USB TMC documents from the USB-IF entitled
"Universal Serial Bus Test and Measurement Class, Subclass
USB488 Specification (USBTMC-USB488) Revision 1.0" section
4.2.2.
The files are read only.
What: /sys/bus/usb/drivers/usbtmc/devices/*/TermChar
Date: August 2008
Contact: Greg Kroah-Hartman <gregkh@suse.de>
Description:
This file is the TermChar value to be sent to the USB TMC
device as described by the document, "Universal Serial Bus Test
and Measurement Class Specification
(USBTMC) Revision 1.0" as published by the USB-IF.
Note that the TermCharEnabled file determines if this value is
sent to the device or not.
What: /sys/bus/usb/drivers/usbtmc/devices/*/TermCharEnabled
Date: August 2008
Contact: Greg Kroah-Hartman <gregkh@suse.de>
Description:
This file determines if the TermChar is to be sent to the
device on every transaction or not. For more details about
this, please see the document, "Universal Serial Bus Test and
Measurement Class Specification (USBTMC) Revision 1.0" as
published by the USB-IF.
What: /sys/bus/usb/drivers/usbtmc/devices/*/auto_abort
Date: August 2008
Contact: Greg Kroah-Hartman <gregkh@suse.de>
Description:
This file determines if the the transaction of the USB TMC
device is to be automatically aborted if there is any error.
For more details about this, please see the document,
"Universal Serial Bus Test and Measurement Class Specification
(USBTMC) Revision 1.0" as published by the USB-IF.
......@@ -2571,6 +2571,9 @@ Your cooperation is appreciated.
160 = /dev/usb/legousbtower0 1st USB Legotower device
...
175 = /dev/usb/legousbtower15 16th USB Legotower device
176 = /dev/usb/usbtmc1 First USB TMC device
...
192 = /dev/usb/usbtmc16 16th USB TMC device
240 = /dev/usb/dabusb0 First daubusb device
...
243 = /dev/usb/dabusb3 Fourth dabusb device
......
......@@ -110,6 +110,8 @@ Code Seq# Include File Comments
'W' 00-1F linux/wanrouter.h conflict!
'X' all linux/xfs_fs.h
'Y' all linux/cyclades.h
'[' 00-07 linux/usb/usbtmc.h USB Test and Measurement Devices
<mailto:gregkh@suse.de>
'a' all ATM on linux
<http://lrcwww.epfl.ch/linux-atm/magic.html>
'b' 00-FF bit3 vme host bridge
......
......@@ -40,3 +40,13 @@ config USB_WDM
To compile this driver as a module, choose M here: the
module will be called cdc-wdm.
config USB_TMC
tristate "USB Test and Measurement Class support"
depends on USB
help
Say Y here if you want to connect a USB device that follows
the USB.org specification for USB Test and Measurement devices
to your computer's USB port.
To compile this driver as a module, choose M here: the
module will be called usbtmc.
......@@ -6,3 +6,4 @@
obj-$(CONFIG_USB_ACM) += cdc-acm.o
obj-$(CONFIG_USB_PRINTER) += usblp.o
obj-$(CONFIG_USB_WDM) += cdc-wdm.o
obj-$(CONFIG_USB_TMC) += usbtmc.o
此差异已折叠。
......@@ -4,4 +4,4 @@ header-y += ch9.h
header-y += gadgetfs.h
header-y += midi.h
header-y += g_printer.h
header-y += tmc.h
/*
* Copyright (C) 2007 Stefan Kopp, Gechingen, Germany
* Copyright (C) 2008 Novell, Inc.
* Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de>
*
* This file holds USB constants defined by the USB Device Class
* Definition for Test and Measurement devices published by the USB-IF.
*
* It also has the ioctl definitions for the usbtmc kernel driver that
* userspace needs to know about.
*/
#ifndef __LINUX_USB_TMC_H
#define __LINUX_USB_TMC_H
/* USB TMC status values */
#define USBTMC_STATUS_SUCCESS 0x01
#define USBTMC_STATUS_PENDING 0x02
#define USBTMC_STATUS_FAILED 0x80
#define USBTMC_STATUS_TRANSFER_NOT_IN_PROGRESS 0x81
#define USBTMC_STATUS_SPLIT_NOT_IN_PROGRESS 0x82
#define USBTMC_STATUS_SPLIT_IN_PROGRESS 0x83
/* USB TMC requests values */
#define USBTMC_REQUEST_INITIATE_ABORT_BULK_OUT 1
#define USBTMC_REQUEST_CHECK_ABORT_BULK_OUT_STATUS 2
#define USBTMC_REQUEST_INITIATE_ABORT_BULK_IN 3
#define USBTMC_REQUEST_CHECK_ABORT_BULK_IN_STATUS 4
#define USBTMC_REQUEST_INITIATE_CLEAR 5
#define USBTMC_REQUEST_CHECK_CLEAR_STATUS 6
#define USBTMC_REQUEST_GET_CAPABILITIES 7
#define USBTMC_REQUEST_INDICATOR_PULSE 64
/* Request values for USBTMC driver's ioctl entry point */
#define USBTMC_IOC_NR 91
#define USBTMC_IOCTL_INDICATOR_PULSE _IO(USBTMC_IOC_NR, 1)
#define USBTMC_IOCTL_CLEAR _IO(USBTMC_IOC_NR, 2)
#define USBTMC_IOCTL_ABORT_BULK_OUT _IO(USBTMC_IOC_NR, 3)
#define USBTMC_IOCTL_ABORT_BULK_IN _IO(USBTMC_IOC_NR, 4)
#define USBTMC_IOCTL_CLEAR_OUT_HALT _IO(USBTMC_IOC_NR, 6)
#define USBTMC_IOCTL_CLEAR_IN_HALT _IO(USBTMC_IOC_NR, 7)
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册