- 24 9月, 2007 1 次提交
-
-
git://git.infradead.org/battery-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/battery-2.6: [PATCH] missing null termination in power supply uevent
-
- 23 9月, 2007 5 次提交
-
-
由 Thomas Gleixner 提交于
In a desparate attempt to fix the suspend/resume problem on Andrews VAIO I added a workaround which enforced the broadcast of the oneshot timer on resume. This was actually resolving the problem on the VAIO but was just a stupid workaround, which was not tackling the root cause: the assignement of lower idle C-States in the ACPI processor_idle code. The cpuidle patches, which utilize the dynamic tick feature and go faster into deeper C-states exposed the problem again. The correct solution is the previous patch, which prevents lower C-states across the suspend/resume. Remove the enforcement code, including the conditional broadcast timer arming, which helped to pamper over the real problem for quite a time. The oneshot broadcast flag for the cpu, which runs the resume code can never be set at the time when this code is executed. It only gets set, when the CPU is entering a lower idle C-State. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Tested-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Len Brown <lenb@kernel.org> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thomas Gleixner 提交于
device_suspend() calls ACPI suspend functions, which seems to have undesired side effects on lower idle C-states. It took me some time to realize that especially the VAIO BIOSes (both Andrews jinxed UP and my elfstruck SMP one) show this effect. I'm quite sure that other bug reports against suspend/resume about turning the system into a brick have the same root cause. After fishing in the dark for quite some time, I realized that removing the ACPI processor module before suspend (this removes the lower C-state functionality) made the problem disappear. Interestingly enough the propability of having a bricked box is influenced by various factors (interrupts, size of the ram image, ...). Even adding a bunch of printks in the wrong places made the problem go away. The previous periodic tick implementation simply pampered over the problem, which explains why the dyntick / clockevents changes made this more prominent. We avoid complex functionality during the boot process and we have to do the same during suspend/resume. It is a similar scenario and equaly fragile. Add suspend / resume functions to the ACPI processor code and disable the lower idle C-states across suspend/resume. Fall back to the default idle implementation (halt) instead. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Tested-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Len Brown <lenb@kernel.org> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: suspend: consolidate handling of Sx states addendum ACPI: suspend: consolidate handling of Sx states. ACPI: video: remove dmesg spam ACPI: video: _DOS=0 by default to prevent hotkey hang
-
git://oss.sgi.com:8090/xfs/xfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: [XFS] fix valid but harmless sparse warning [XFS] fix filestreams on 32-bit boxes
-
由 Avi Kivity 提交于
What guest drivers? Cc: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NAvi Kivity <avi@qumranet.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 9月, 2007 10 次提交
-
-
由 Len Brown 提交于
-
由 Len Brown 提交于
-
由 Frans Pop 提交于
Make the S0 state be always reported as supported Signed-off: Frans Pop <elendil@planet.nl> Acked-by: NAlexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4569/1: ep93xx_gpio_irq_type(): fix spurious enumeration offset for FGPIO handling [ARM] 4568/1: fix l2x0 cache invalidate handling of unaligned addresses
-
由 Linus Torvalds 提交于
This reverts commit 34feb2c8. Suresh Siddha points out that this one breaks the fundamental requirement that you cannot free page table pages before the TLB caches are flushed. The quicklists do not give the same kinds of guarantees that the mmu_gather structure does, at least not in NUMA configurations. Requested-by: NSuresh Siddha <suresh.b.siddha@intel.com> Acked-by: NAndi Kleen <ak@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <clameter@sgi.com> Cc: Asit Mallick <asit.k.mallick@intel.com> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] BCM1480: include <linux/init.h>. [MIPS] BCM1480: Export zbbus_mhz.
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Symbol is required by the ZBus profiler. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: ocfs2: Pack vote message and response structures ocfs2: Don't double set write parameters ocfs2: Fix pos/len passed to ocfs2_write_cluster ocfs2: Allow smaller allocations during large writes
-
由 Andi Kleen 提交于
Strictly it's only needed for eax. It actually does a little more than strictly needed -- the other registers are already zero extended. Also remove the now unnecessary and non functional compat task check in ptrace. This is CVE-2007-4573 Found by Wojciech Purczynski Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 21 9月, 2007 24 次提交
-
-
由 Alexey Starikovskiy 提交于
Recent changes to sleep initialization in ACPI dropped reporting of supported Sx states above S3. Fix that and also move S5 init into same file as other Sx. The only functional change is adding printk() for S4 and S5 cases. Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de> Acked-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Sunil Mushran 提交于
The ocfs2_vote_msg and ocfs2_response_msg structs needed to be packed to ensure similar sizeofs in 32-bit and 64-bit arches. Without this, we had inadvertantly broken 32/64 bit cross mounts. Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Mark Fasheh 提交于
The target page offsets were being incorrectly set a second time in ocfs2_prepare_page_for_write(), which was causing problems on a 16k page size kernel. Additionally, ocfs2_write_failure() was incorrectly using those parameters instead of the parameters for the individual page being cleaned up. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Mark Fasheh 提交于
This was broken for file systems whose cluster size is greater than page size. Pos needs to be incremented as we loop through the descriptors, and len needs to be capped to the size of a single cluster. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Mark Fasheh 提交于
The ocfs2 write code loops through a page much like the block code, except that ocfs2 allocation units can be any size, including larger than page size. Typically it's equal to or larger than page size - most kernels run 4k pages, the minimum ocfs2 allocation (cluster) size. Some changes introduced during 2.6.23 changed the way writes to pages are handled, and inadvertantly broke support for > 4k page size. Instead of just writing one cluster at a time, we now handle the whole page in one pass. This means that multiple (small) seperate allocations might happen in the same pass. The allocation code howver typically optimizes by getting the maximum which was reserved. This triggered a BUG_ON in the extend code where it'd ask for a single bit (for one part of a > 4k page) and get back more than it asked for. Fix this by providing a variant of the high level allocation function which allows the caller to specify a maximum. The traditional function remains and just calls the new one with a maximum determined from the initial reservation. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Stephen Hemminger 提交于
Need to null terminate environment. Found by inspection while looking for similar problems to platform uevent bug Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] ahci: add ATI SB800 PCI IDs libata-sff: Fix documentation libata: Update the blacklist with a few more devices
-
由 Davide Libenzi 提交于
This simplifies signalfd code, by avoiding it to remain attached to the sighand during its lifetime. In this way, the signalfd remain attached to the sighand only during poll(2) (and select and epoll) and read(2). This also allows to remove all the custom "tsk == current" checks in kernel/signal.c, since dequeue_signal() will only be called by "current". I think this is also what Ben was suggesting time ago. The external effect of this, is that a thread can extract only its own private signals and the group ones. I think this is an acceptable behaviour, in that those are the signals the thread would be able to fetch w/out signalfd. Signed-off-by: NDavide Libenzi <davidel@xmailserver.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Wolfgang Walter 提交于
we upgraded the kernel of a nfs-server from 2.6.17.11 to 2.6.22.6. Since then we get the message lockd: too many open TCP sockets, consider increasing the number of nfsd threads lockd: last TCP connect from ^\\236^\É^D These random characters in the second line are caused by a bug in svc_tcp_accept. (Note: there are two previous __svc_print_addr(sin, buf, sizeof(buf)) calls in this function, either of which would initialize buf correctly; but both are inside "if"'s and are not necessarily executed. This is less obvious in the second case, which is inside a dprintk(), which is a macro which expands to an if statement.) Signed-off-by: NWolfgang Walter <wolfgang.walter@studentenwerk.mhn.de> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 henry su 提交于
ATI/AMD SB800 shares some device IDs with SB700, and SB800 adds two more device IDs:0x4394,0x4395. Signed-off-by: Nhenry su <henry.su.ati@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alan Cox 提交于
Code moved to ioread/iowrite but the comment didn't Also note a posting issue Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Linus Torvalds 提交于
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [BNX2]: Add PHY workaround for 5709 A1. [PPP] L2TP: Fix skb handling in pppol2tp_xmit [PPP] L2TP: Fix skb handling in pppol2tp_recv_core [PPP] L2TP: Disallow non-UDP datagram sockets [PPP] pppoe: Fix double-free on skb after transmit failure [PKT_SCHED]: Fix 'SFQ qdisc crashes with limit of 2 packets' [NETFILTER]: MAINTAINERS update [NETFILTER]: nfnetlink_log: fix sending of multipart messages
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: sky2: version 1.18 sky2: receive FIFO checking sky2: fe+ chip support sky2: reorganize chip revision features sky2: ethtool speed report bug sky2: fix VLAN receive processing (resend) phy: export phy_mii_ioctl myri10ge: Add support for PCI device id 9
-
由 Stephen Hemminger 提交于
Update version number Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
A driver writer from another operating system hinted that the versions of Yukon 2 chip with rambuffer (EC and XL) have a hardware bug that if the FIFO ever gets completely full it will hang. Sounds like a classic ring full vs ring empty wrap around bug. As a workaround, use the existing watchdog timer to check for ring full lockup. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Add support for newest Marvell chips. The Yukon FE plus chip is found in some not yet released laptops. Tested on hardware evaluation boards. This version of the patch is for 2.6.23. It supersedes the two previous patches that are sitting in netdev-2.6 (upstream branch). Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
This patch should cause no functional changes in driver behaviour. There are (too) many revisions of the Yukon 2 chip now. Instead of adding more conditionals based on chip revision; rerganize into a set of feature flags so adding new versions is less problematic. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
On 100mbit versions, the driver always reports gigabit speed available. The correct modes are already computed, then overwritten. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
The length check for truncated frames was not correctly handling the case where VLAN acceleration had already read the tag. Also, the Yukon EX has some features that use high bit of status as security tag. Signed-off-by: NPierre-Yves Ritschard <pyr@spootnik.org> Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stefan Richter 提交于
Initialization of ohci1394 was broken according to one reporter if the driver was statically linked, i.e. not built as loadable module. Dmesg: PCI: Device 0000:02:07.0 not available because of resource collisions ohci1394: Failed to enable OHCI hardware. This was reported for a Toshiba Satellite 5100-503. The cause is commit 8df4083c in Linux 2.6.19-rc1 which only served purposes of early remote debugging via FireWire. This functionality is better provided by the currently out-of-tree driver ohci1394_earlyinit. Reversal of the commit was OK'd by Andi Kleen. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Michael Chan 提交于
Add the DIS_EARLY_DAC PHY workaround for 5709 A1. Without it, link sometimes does not come up. Update version to 1.6.5. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch makes pppol2tp_xmit call skb_cow_head so that we don't modify cloned skb data. It also gets rid of skb2 we only need to preserve the original skb for congestion notification, which is only applicable for ppp_async and ppp_sync. The other semantic change made here is the removal of socket accounting for data tranmitted out of pppol2tp_xmit. The original code leaked any existing socket skb accounting. We could fix this by dropping the original skb owner. However, this is undesirable as the packet has not physically left the host yet. In fact, all other tunnels in the kernel do not account skb's passing through to their own socket. In partciular, ESP over UDP does not do so and it is the closest tunnel type to PPPoL2TP. So this patch simply removes the socket accounting in pppol2tp_xmit. The accounting still applies to control packets of course. I've also added a reminder that the outgoing checksum here doesn't work. I suppose existing deployments don't actually enable checksums. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
The function pppol2tp_recv_core doesn't handle non-linear packets properly. It also fails to check the remote offset field. This patch fixes these problems. It also removes an unnecessary check on the UDP header which has already been performed by the UDP layer. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-