- 12 1月, 2008 40 次提交
-
-
由 Boaz Harrosh 提交于
- convert to accessors and !use_sg cleanup Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Boaz Harrosh 提交于
- convert to accessors and !use_sg cleanup Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Boaz Harrosh 提交于
- convert to accessors and !use_sg cleanup Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Boaz Harrosh 提交于
- convert to accessors and !use_sg cleanup - Not ready for sg-chaining Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Boaz Harrosh 提交于
- convert to accessors and !use_sg cleanup Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Boaz Harrosh 提交于
- convert to accessors and !use_sg cleanup Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Boaz Harrosh 提交于
- convert to accessors and !use_sg cleanup Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Boaz Harrosh 提交于
- convert to accessors and !use_sg cleanup Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Boaz Harrosh 提交于
- use scsi data accessors - cleanup !use_sg code paths - TODO: use next_sg() for Jens's sglist branch. Look for 2 places with "SCp.buffer++" Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Boaz Harrosh 提交于
- Use new scsi_eh_prep/restor_cmnd() for synchronous REQUEST_SENSE invocation. Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
I was working on patches which add new transport error values, when I noticed that DID_REQUEUE was not in the hostbyte_table. I do not think there is any way to hit the code path where scsi_show_result is called and where you return DID_REQUEUE, because DID_REQUEUE causes scsi-ml to always requeue the command. However, for completeness and because I want to one day send a patch that tries to add new host bytes values, I am sending this patch. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Change version number to 8.2.3 Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Temperature handling fix - return proper error code indicator for applications Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Internal loopback fixes: - Use HBQs rather than Q_RING_BUFF - Correct HBQs continuation entries - Update CT handler to SLI3 iocbs Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Miscellaneous Small Fixes - part 2 - Fix ndlp left in PLOGI state after link up - Fix cannot rcv unsol ELS frames after running HBA resets for a few minutes - Fix HBQ buffer_count implemention - Fix RPI leak - Fix crash while deleting vports while HBA is reset - Revert the FCP Fbits offset back to 7 - Fix panic when deleting vports - Remove unused code in switch statement outside of a case - Reject PLOGI from invalid PName or NName of 0 - Ignore PLOGI responses from WWPName or WWNName of 0 - Fix debugfs hbqinfo display for ppc - Added 8G to list of supported speeds for sysfs parameter - Defer ndlp cleanup to dev-loss timeout handler - Added support for WRITE_VPARMS mailbox command by applications Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
FC Discovery Fixes: - Fix up lpfc_drop_node() vs lpfc_nlp_not_used() usage - Clear ADISC flag when unregistering RPI and REMOVE ndlps if in recovery. - Fix usage of UNUSED list and ndlps - Fix PLOGI race conditions - Reset link if NameServer PLOGI errors occur - Synchronize GID_FT queries with PLOGI receptions Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Miscellaneous Small Fixes - part 1 - Fix typo kmzlloc -> kzalloc - Fix discovery ndlp use after free panic - Fix link event causing flood of 0108 messages - Relieve some mbox congestion on link up with 100 vports - Fix broken vport parameters - Prevent lock recursion in logo_reglogin_issue - Split uses of error variable in lpfc_pci_probe_one into retval and error - Remove completion code related to dev_loss_tmo - Remove unused LPFC_MAX_HBQ #define - Don't compare pointers to 0 for sparse - Make 2 functions static for sparse - Fix default rpi cleanup code causing rogue ndlps to remain on the NPR list - Remove annoying ELS messages when driver is unloaded - Fix Cannot issue Register Fabric login problems on link up - Remove LPFC_EVT_DEV_LOSS_DELAY - Fix FC port swap test leads to device going offline - Fix vport CT flags to only be set when accepted - Add code to handle signals during vport_create - Fix too many retries in FC-AL mode - Pull lpfc_port_link_failure out of lpfc_linkdown_port Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Remove flawed MBX_STOP_IOCB logic Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
NPIV bug fixes: - Remove vport params on physical hba when npiv is disabled - Implement new DA_ID CT command to remove vport information from the switch after delete. Some switches didn't clean this up unless the physical link dropped. Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Added support for ASICs that report temperature. Temperature notices are reported as events and logged. Temperature can be read via sysfs. Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Brian King 提交于
Set the default command timeout for ibmvscsi disks to 60 seconds to ensure we don't prematurely timeout commands. This fixes a problem seen where the default 30 seconds was not long enough due to congestion on the server. Signed-off-by: NBrian King <brking@linux.vnet.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Adrian Bunk 提交于
This patch does some additional cleanups after the 53c7xx removal. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 FUJITA Tomonori 提交于
- convert to use the new accessors for the sg lists and the parameters. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Gilbert Wu 提交于
1. Create a file "update_bios" in sysfs to allow user to update bios from user space. 2. The BIOS image file can be downloaded from web site "http://www.adaptec.com/en-US/downloads/bios_fw/bios_fw_ver?productId=SAS-48300&dn=Adaptec+Serial+Attached+SCSI+48300" and copy the BIOS image into /lib/firmware folder. 3. The aic994xx will accept "update bios_file" and "verify bios_file" commands to perform update and verify BIOS image . For example: Type "echo "update asc483c01.ufi" > /sys/devices/.../update_bios" to update BIOS image from /lib/firmware/as483c01.ufi file into HBA's flash memory. Type "echo "verify asc483c01.ufi" > /sys/devices/.../update_bios" to verify BIOS image between /lib/firmware/asc48c01.ufi file and HBA's flash memory. 4. Type "cat /sys/devices/.../update_bios" to view the status or result of updating BIOS. Signed-off-by: NGilbert Wu <gilbert_wu@adaptec.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Kay Sievers 提交于
This will send for a card reader slot (remove/add media): UEVENT[1187091572.155884] change /devices/pci0000:00/0000:00:1d.7/usb5/5-2/5-2:1.0/host7/target7:0:0/7:0:0:0 (scsi) UEVENT[1187091572.162314] remove /block/sdb/sdb1 (block) UEVENT[1187091572.172464] add /block/sdb/sdb1 (block) UEVENT[1187091572.175408] change /devices/pci0000:00/0000:00:1d.7/usb5/5-2/5-2:1.0/host7/target7:0:0/7:0:0:0 (scsi) and for a DVD drive (add/eject media): UEVENT[1187091590.189159] change /devices/pci0000:00/0000:00:1f.1/host4/target4:0:0/4:0:0:0 (scsi) UEVENT[1187091590.957124] add /module/isofs (module) UEVENT[1187091604.468207] change /devices/pci0000:00/0000:00:1f.1/host4/target4:0:0/4:0:0:0 (scsi) Userspace gets events, even for unpartitioned media. This unifies the event handling for asynchronoous events (AN) and events caused by perodical polling the device from userspace. Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> [jejb: modified for new event API] Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (7001): av7110: fix section mismatch V4L/DVB (6999): ivtv: stick to udelay=10 after all
-
git://oss.sgi.com:8090/xfs/xfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: [XFS] fix unaligned access in readdir
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.24由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.24: sh: Force __access_ok() to obey address space limit. sh: Fix argument page dcache flushing regression.
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Replace 40c7869b kludge [MIPS] Lasat: Fix built in separate object directory. [MIPS] Malta: Fix software reset on big endian [MIPS] pnx8xxx: move to clocksource [MIPS] Wrong CONFIG option prevents setup of DMA zone.
-
由 Jeremy Kerr 提交于
Since the introduction of the acquire_console_sem calls in 0333d835, kexecing can cause the kernel to deadlock: ps3fb_shutdown() -> unregister_framebuffer() -> fb_notifier_call_chain(FB_EVENT_FB_UNBIND) -> fbcon_fb_unbind() -> unbind_con_driver() -> bind_con_driver() [ acquires console_sem ] -> fbcon_deinit() -> fbops->fb_release(newinfo, 0) -> ps3fb_release() -> ps3fb_sync() [ acquires console_sem ] This change avoids the deadlock by moving the acquire_console_sem() out of ps3fb_sync(), and puts it into the two other callsites, leaving ps3fb_release() to call ps3fb_sync() without the console semaphore. [Geert] - Corrected call sequence above - ps3fb_release() may be called with and without console_sem held. This is an inconsistency that should be fixed at the fb level, but for now, try to acquire console_sem in ps3fb_release(). I think it's safer to let ps3fb_release() try to acquire console_sem and not refresh the screen if it fails, than to call ps3fb_sync() without holding console_sem, as ps3fb_par may be modified at the same time, causing crashes or lockups. Besides, ps3fb_release() only calls ps3fb_sync() to refresh the screen when display flipping is disabled, which is an uncommon case (except during shutdown/kexec). Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeremy Kerr 提交于
In ps3fb_shutdown, freeing the framebuffer will cause fb_info (in dev->core.driver_data) to be free()ed, which we potentially access from the ps3fbd kthread. This change frees the framebuffer after stopping the ps3fbd kthread. Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: blktrace: kill the unneeded initcall block: fix blktrace timestamps loop: fix bad bio_alloc() nr_iovec request Don't blatt first element of prv in sg_chain()
-
由 Massimo Cirillo 提交于
The bug causes corruptions of data read from flash. The original code performs cache invalidation from "adr" to "adr + len" in do_write_buffer(). Since len and adr could be updated in the code before invalidation - it causes improper setting of cache invalidation regions. Signed-off-by: NMassimo Cirillo <maxcir@gmail.com> Signed-off-by: NGiuseppe D'Eliseo <giuseppedeliseo@gmail.com> Acked-by: NNicolas Pitre <nico@cam.org> Acked-by: NJörn Engel <joern@logfs.org> Signed-off-by: NDavid Woohouse <dwmw2@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Garzik 提交于
Fix oops reported by Trond. Signed-off-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Atsushi Nemoto 提交于
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 WANG Cong 提交于
Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com> [Ralf: The LDSCRIPT script needed fixing, too] Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Dmitri Vorobiev 提交于
I noticed that the commit f1974653 (MIPS Tech: Get rid of volatile in core code) broke the software reset functionality for MIPS Malta boards in big-endian mode. According to the MIPS Malta board user's manual, writing the magic 32-bit GORESET value into the SOFTRES register initiates board soft reset. My experimentation has shown that the endianness of the GORESET integer should thereby be the same as the endianness, which has been set for the CPU itself. The writew() function used to write the magic value in the code introduced by the commit mentioned above, however, swaps bytes for big-endian kernels and transfers 16 bits instead of 32. The patch below replaces the writew() function by the __raw_writel() routine, which leaves the byte order intact and transfers the whole MIPS machine word. Trivial code cleanup (replacing spaces by a tab and cutting oversized lines to make checkpatch.pl happy) is also included. The patch was tested using a Malta evaluation board running in both BE and LE modes. For both modes, software reset was fully functional after the change. P.S. I suspect that the same commit broke the "standby" functionality for MIPS Atlas boards. However, I did not touch the Atlas code as I don't have such board at my disposal and also because the linux-mips.org Web site claims that Atlas support is scheduled for removal. Signed-off-by: NDmitri Vorobiev <dmitri.vorobiev@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Vitaly Wool 提交于
This patch converts PNX8XXX system timer to clocksource restoring PNX8550 support back to live. Signed-off-by: NVitaly Wool <vitalywool@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Bogendoerfer 提交于
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Randy Dunlap 提交于
Fix driver data name to match whitelist of acceptable names that contain pointers init data so that section mismatch warning is placated. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-