提交 22fb53c9 编写于 作者: L Linus Torvalds

Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Replace 40c7869b kludge
  [MIPS] Lasat: Fix built in separate object directory.
  [MIPS] Malta: Fix software reset on big endian
  [MIPS] pnx8xxx: move to clocksource
  [MIPS] Wrong CONFIG option prevents setup of DMA zone.
......@@ -269,7 +269,7 @@ static void __init bootmem_init(void)
static void __init bootmem_init(void)
{
unsigned long init_begin, reserved_end;
unsigned long reserved_end;
unsigned long mapstart = ~0UL;
unsigned long bootmap_size;
int i;
......@@ -344,7 +344,6 @@ static void __init bootmem_init(void)
min_low_pfn, max_low_pfn);
init_begin = PFN_UP(__pa_symbol(&__init_begin));
for (i = 0; i < boot_mem_map.nr_map; i++) {
unsigned long start, end;
......@@ -352,8 +351,8 @@ static void __init bootmem_init(void)
end = PFN_DOWN(boot_mem_map.map[i].addr
+ boot_mem_map.map[i].size);
if (start <= init_begin)
start = init_begin;
if (start <= min_low_pfn)
start = min_low_pfn;
if (start >= end)
continue;
......
......@@ -12,11 +12,11 @@ endif
MKLASATIMG = mklasatimg
MKLASATIMG_ARCH = mq2,mqpro,sp100,sp200
KERNEL_IMAGE = $(TOPDIR)/vmlinux
KERNEL_IMAGE = vmlinux
KERNEL_START = $(shell $(NM) $(KERNEL_IMAGE) | grep " _text" | cut -f1 -d\ )
KERNEL_ENTRY = $(shell $(NM) $(KERNEL_IMAGE) | grep kernel_entry | cut -f1 -d\ )
LDSCRIPT= -L$(obj) -Tromscript.normal
LDSCRIPT= -L$(srctree)/$(src) -Tromscript.normal
HEAD_DEFINES := -D_kernel_start=0x$(KERNEL_START) \
-D_kernel_entry=0x$(KERNEL_ENTRY) \
......@@ -24,7 +24,7 @@ HEAD_DEFINES := -D_kernel_start=0x$(KERNEL_START) \
-D TIMESTAMP=$(shell date +%s)
$(obj)/head.o: $(obj)/head.S $(KERNEL_IMAGE)
$(CC) -fno-pic $(HEAD_DEFINES) -I$(TOPDIR)/include -c -o $@ $<
$(CC) -fno-pic $(HEAD_DEFINES) $(LINUXINCLUDE) -c -o $@ $<
OBJECTS = head.o kImage.o
......
......@@ -169,7 +169,6 @@ void __init prom_meminit(void)
void __init prom_free_prom_memory(void)
{
#if 0 /* for now ... */
unsigned long addr;
int i;
......@@ -181,5 +180,4 @@ void __init prom_free_prom_memory(void)
free_init_pages("prom memory",
addr, addr + boot_mem_map.map[i].size);
}
#endif
}
......@@ -39,16 +39,18 @@ static void atlas_machine_power_off(void);
static void mips_machine_restart(char *command)
{
unsigned int __iomem *softres_reg = ioremap(SOFTRES_REG, sizeof(unsigned int));
unsigned int __iomem *softres_reg =
ioremap(SOFTRES_REG, sizeof(unsigned int));
writew(GORESET, softres_reg);
__raw_writel(GORESET, softres_reg);
}
static void mips_machine_halt(void)
{
unsigned int __iomem *softres_reg = ioremap(SOFTRES_REG, sizeof(unsigned int));
unsigned int __iomem *softres_reg =
ioremap(SOFTRES_REG, sizeof(unsigned int));
writew(GORESET, softres_reg);
__raw_writel(GORESET, softres_reg);
}
#if defined(CONFIG_MIPS_ATLAS)
......
......@@ -45,7 +45,7 @@ static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp)
/* ignore region specifiers */
gfp &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM);
#ifdef CONFIG_ZONE_DMA32
#ifdef CONFIG_ZONE_DMA
if (dev == NULL)
gfp |= __GFP_DMA;
else if (dev->coherent_dma_mask < DMA_BIT_MASK(24))
......
......@@ -22,7 +22,6 @@
#include <linux/kernel_stat.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <asm/bootinfo.h>
#include <asm/cpu.h>
......@@ -41,11 +40,60 @@ static cycle_t hpt_read(void)
return read_c0_count2();
}
static struct clocksource pnx_clocksource = {
.name = "pnx8xxx",
.rating = 200,
.read = hpt_read,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static void timer_ack(void)
{
write_c0_compare(cpj);
}
static irqreturn_t pnx8xxx_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *c = dev_id;
/* clear MATCH, signal the event */
c->event_handler(c);
return IRQ_HANDLED;
}
static struct irqaction pnx8xxx_timer_irq = {
.handler = pnx8xxx_timer_interrupt,
.flags = IRQF_DISABLED | IRQF_PERCPU,
.name = "pnx8xxx_timer",
};
static irqreturn_t monotonic_interrupt(int irq, void *dev_id)
{
/* Timer 2 clear interrupt */
write_c0_compare2(-1);
return IRQ_HANDLED;
}
static struct irqaction monotonic_irqaction = {
.handler = monotonic_interrupt,
.flags = IRQF_DISABLED,
.name = "Monotonic timer",
};
static int pnx8xxx_set_next_event(unsigned long delta,
struct clock_event_device *evt)
{
write_c0_compare(delta);
return 0;
}
static struct clock_event_device pnx8xxx_clockevent = {
.name = "pnx8xxx_clockevent",
.features = CLOCK_EVT_FEAT_ONESHOT,
.set_next_event = pnx8xxx_set_next_event,
};
/*
* plat_time_init() - it does the following things:
*
......@@ -58,11 +106,34 @@ static void timer_ack(void)
__init void plat_time_init(void)
{
unsigned int configPR;
unsigned int n;
unsigned int m;
unsigned int p;
unsigned int pow2p;
clockevents_register_device(&pnx8xxx_clockevent);
clocksource_register(&pnx_clocksource);
setup_irq(PNX8550_INT_TIMER1, &pnx8xxx_timer_irq);
setup_irq(PNX8550_INT_TIMER2, &monotonic_irqaction);
/* Timer 1 start */
configPR = read_c0_config7();
configPR &= ~0x00000008;
write_c0_config7(configPR);
/* Timer 2 start */
configPR = read_c0_config7();
configPR &= ~0x00000010;
write_c0_config7(configPR);
/* Timer 3 stop */
configPR = read_c0_config7();
configPR |= 0x00000020;
write_c0_config7(configPR);
/* PLL0 sets MIPS clock (PLL1 <=> TM1, PLL6 <=> TM2, PLL5 <=> mem) */
/* (but only if CLK_MIPS_CTL select value [bits 3:1] is 1: FIXME) */
......@@ -87,42 +158,6 @@ __init void plat_time_init(void)
write_c0_count2(0);
write_c0_compare2(0xffffffff);
clocksource_mips.read = hpt_read;
mips_timer_ack = timer_ack;
}
static irqreturn_t monotonic_interrupt(int irq, void *dev_id)
{
/* Timer 2 clear interrupt */
write_c0_compare2(-1);
return IRQ_HANDLED;
}
static struct irqaction monotonic_irqaction = {
.handler = monotonic_interrupt,
.flags = IRQF_DISABLED,
.name = "Monotonic timer",
};
void __init plat_timer_setup(struct irqaction *irq)
{
int configPR;
setup_irq(PNX8550_INT_TIMER1, irq);
setup_irq(PNX8550_INT_TIMER2, &monotonic_irqaction);
/* Timer 1 start */
configPR = read_c0_config7();
configPR &= ~0x00000008;
write_c0_config7(configPR);
/* Timer 2 start */
configPR = read_c0_config7();
configPR &= ~0x00000010;
write_c0_config7(configPR);
/* Timer 3 stop */
configPR = read_c0_config7();
configPR |= 0x00000020;
write_c0_config7(configPR);
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册