- 04 5月, 2005 40 次提交
-
-
由 Al Viro 提交于
annotated, a bunch of direct dereferencing replaced with readb(). Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
New file - asm-generic/signal.h. Contains declarations of __sighandler_t, __sigrestore_t, SIG_DFL, SIG_IGN, SIG_ERR and default definitions of SIG_BLOCK, SIG_UNBLOCK and SIG_SETMASK. asm-*/signal.h switched to including it. The only exception is asm-parisc/signal.h that wants its own declaration of __sighandler_t; that one is left as-is. asm-ppc64/signal.h required one more thing - unlike everybody else it used __sigrestorer_t instead of usual __sigrestore_t. PPC64 switched to common spelling. Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
* net/irda/irda_device.c::irda_setup_dma() made conditional on ISA_DMA_API (it uses helpers in question and irda is usable on platforms that don't have them at all - think of USB IRDA, for example). * irda drivers that depend on ISA DMA marked as dependent on ISA_DMA_API Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Drivers that expect ISA DMA API are marked as such in Kconfig. Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Part of parport_pc that uses ISA DMA helpers made conditional on CONFIG_ISA_DMA_API. As the result, driver got usable for boxen that do not have ISA DMA stuff and have normal PCI parport card stuck into them - these never use DMA anyway. Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
A bunch of drivers use ISA DMA helpers or their equivalents for platforms that have ISA with different DMA controller (a lot of ARM boxen). Currently there is no way to put such dependency in Kconfig - CONFIG_ISA is not it (e.g. it is not set on platforms that have no ISA slots, but have on-board devices that pretend to be ISA ones). New symbol added - ISA_DMA_API. Set when we have functional enable_dma()/set_dma_mode()/etc. set of helpers. Next patches in the series will add missing dependencies for drivers that need them. I'm very carefully staying the hell out of the recurring flamefest on what exactly CONFIG_ISA would mean in ideal world - added symbol has a well-defined meaning and for now I really want to treat it as completely independent from the mess around CONFIG_ISA. Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
pci_dac_set_dma_mask is currently completely unused. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dely Sy 提交于
I fogot to remove the code that freed the memory in cleanup_slots(). Here is the new patch, which I have also taken care of the comment by Eike to remove the cast in hotplug_slot->private. Signed-off-by: NDely Sy <dely.l.sy@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Steven Cole 提交于
Here are some spelling corrections for drivers/pci. CONTROLER -> CONTROLLER Regisetr -> Register harware -> hardware inital -> initial Initilize -> Initialize funtion -> function funciton -> function occured -> occurred Signed-off-by: NSteven Cole <elenstev@mesatop.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 R.Marek@sh.cvut.cz 提交于
This patch just adds Intel's Hance Rapid south bridge IDs to ICH4 region quirk. Patch was successfuly tested by Chunhao Huang from Winbond. Signed-Off-By: NRudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Rolf Eike Beer 提交于
here is the patch that fixes the bug introduced by my previous patch which already went into 2.6.12-rc2 and is likely to cause trouble is someone hits one the else case here by accident. Using the &= operation before the if statement destroys the information the if asks for so we always go into the else branch. Signed-off-by: NRolf Eike Beer <eike-hotplug@sf-tec.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg KH 提交于
Now pci drivers can know when the system is going down without having to add a reboot notifier event. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 ssant@in.ibm.com 提交于
This patch adds the possibility to do word-aligned 16-bit atomic PCI configuration space accesses via the sysfs PCI interface. As a result, problems with Emulex LFPC on IBM PowerPC64 are fixed. Patch is present in SLES 9 SP1. Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg KH 提交于
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pavel Machek 提交于
This fixes u32 vs. pm_message_t confusion in documentation, and removes references to no-longer-existing (*save_state), too. With exception of USB (I hope David will fix/apply my patch), this should fix last piece of this confusion... famous last words. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Matthew Wilcox 提交于
pci_find_slot() doesn't work on multiple-domain boxes so pci_get_slot() should be used instead. Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kenji Kaneshige 提交于
I think 'is_enabled' flag in pci_dev structure should be set/cleared when the device actually enabled/disabled. Especially about pci_enable_device(), it can be failed. By this change, we will also get the possibility of refering 'is_enabled' flag from the functions called through pci_enable_device()/pci_disable_device(). Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ed L Cashin 提交于
update version number to 10 Signed-off-by: NEd L. Cashin <ecashin@coraid.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ed L Cashin 提交于
add firmware version to info in sysfs Signed-off-by: NEd L. Cashin <ecashin@coraid.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ed L Cashin 提交于
allow multiple aoe devices to have the same mac Signed-off-by: NEd L. Cashin <ecashin@coraid.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> diff -u b/drivers/block/aoe/aoedev.c b/drivers/block/aoe/aoedev.c
-
由 Ed L Cashin 提交于
update the documentation to mention aoetools Signed-off-by: NEd L. Cashin <ecashin@coraid.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ed L Cashin 提交于
aoe-stat should work for built-in as well as module Signed-off-by: NEd L. Cashin <ecashin@coraid.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> diff -uprN a/Documentation/aoe/status.sh b/Documentation/aoe/status.sh
-
由 Ed L Cashin 提交于
improve allowed interfaces configuration Signed-off-by: NEd L. Cashin <ecashin@coraid.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> diff -uprN a/Documentation/aoe/aoe.txt b/Documentation/aoe/aoe.txt
-
由 Lonnie Mendez 提交于
Fixed problem where setting or retreiving the serial config would fail with EPIPE. Removed CRTS toggling so the driver behaves more like other usbserial adapters. Issued new interval of 1ms instead of the default bInterval. As a result, transfer speed has been substantially increased. From avg. 850bps to avg. 3300bps. Also added new module parameter 'interval' to tweak the interval in case this change causes problems for someone. Cleaned up code and formatting issues so source is more readable. Replaced the C++ style comments. Various other code cleanups. Signed-off-by: NLonnie Mendez <lmendez19@austin.rr.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Steven Cole 提交于
Here are some spelling corrections for drivers/usb. cancelation -> cancellation succesful -> successful cancelation -> cancellation decriptor -> descriptor Initalize -> Initialize wierd -> weird Protocoll -> Protocol occured -> occurred successfull -> successful Procesing -> Processing devide -> divide Isochronuous -> Isochronous noticable -> noticeable Basicly -> Basically transfering -> transferring intialize -> initialize Incomming -> Incoming additionnal -> additional asume -> assume Unfortunatly -> Unfortunately retreive -> retrieve tranceiver -> transceiver Compatiblity -> Compatibility Incorprated -> Incorporated existance -> existence Ununsual -> Unusual Signed-off-by: NSteven Cole <elenstev@mesatop.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Phil Dibowitz 提交于
This patch adds an unusual_devs entry for the Minolta Dimage Z10. Originally reported by Vilisas <vilisas@xxx.lt> Signed-off-by: NPhil Dibowitz <phil@ipom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Vivian Bregier 提交于
Signed-off-by: NPhil Dibowitz <phil@ipom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ian Abbott 提交于
[ftdi_sio] Replaced redundant INTERFACE_A and INTERFACE_B macros with the equivalent PIT_SIOA and PIT_SIOB macros. Signed-off-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ian Abbott 提交于
Some VID/PID updates for the ftdi_sio driver: * The "Gude Analog- und Digitalsysteme GmbH" entries were missing from the "combined" table. * Replaced FTDI_8U232AM_ALT_ALT_PID with 3 PIDs for devices from 4n-galaxy.de. * Removed redundant FTDI_RM_VID and renamed FTDI_RMCANVIEW_PID to FTDI_RM_CANVIEW_PID. * Added VID/PID for serial converter in Mobility Electronics EasiDock USB 200 (mentioned by Gregory Schmitt). * Added PID for Active Robots USB comms board (mentioned by John Koch). Signed-off-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> diff -ur a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
-
由 Andrea Arcangeli 提交于
On Thu, Apr 14, 2005 at 11:06:21PM +0400, Sergey Vlasov wrote: > http://thread.gmane.org/gmane.linux.usb.devel/32977 > > (see "[PATCH] N/3 cdc acm errors"). > > You also need this driver core fix: > > http://thread.gmane.org/gmane.linux.usb.devel/33132 I reproduced the same oops while trying to execute at+mode=99, it would be nice to get these fix merged since I believe it's still needed to connect the laptop over gprs (something I didn't test yet). This further patch will allow you to connect via usbnet, Greg could you apply? Thanks! Signed-off-by: NAndrea Arcangeli <andrea@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg KH 提交于
Easier than trying to use the generic usb-serial driver. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
Miscellaneous updates for EHCI. - Mostly updates the power switching on EHCI controllers. One routine centralizes the "power on/off all ports" logic, and the capability to do that is reported more correctly. - Courtesy Colin Leroy, a patch to always power up ports after resumes which didn't keep a USB device suspended. The reset-everything logic powers down those ports (on some hardware) so something needs to turn them back on. - Minor tweaks/bugfixes for the debug port support. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Matthew Dharm 提交于
This patch fixes a compiler error caused by a missing prototype. It should apply directly to Greg KH's usb-2.6.git tree. Signed-off-by: NMatthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-