提交 a1d4ebdb 编写于 作者: L Linus Torvalds
......@@ -4,6 +4,16 @@ The EtherDrive (R) HOWTO for users of 2.6 kernels is found at ...
It has many tips and hints!
The aoetools are userland programs that are designed to work with this
driver. The aoetools are on sourceforge.
http://aoetools.sourceforge.net/
The scripts in this Documentation/aoe directory are intended to
document the use of the driver and are not necessary if you install
the aoetools.
CREATING DEVICE NODES
Users of udev should find the block device nodes created
......@@ -35,14 +45,15 @@ USING DEVICE NODES
"echo eth2 eth4 > /dev/etherd/interfaces" tells the aoe driver to
limit ATA over Ethernet traffic to eth2 and eth4. AoE traffic from
untrusted networks should be ignored as a matter of security.
untrusted networks should be ignored as a matter of security. See
also the aoe_iflist driver option described below.
"echo > /dev/etherd/discover" tells the driver to find out what AoE
devices are available.
These character devices may disappear and be replaced by sysfs
counterparts, so distribution maintainers are encouraged to create
scripts that use these devices.
counterparts. Using the commands in aoetools insulates users from
these implementation details.
The block devices are named like this:
......@@ -66,7 +77,8 @@ USING SYSFS
through which we are communicating with the remote AoE device.
There is a script in this directory that formats this information
in a convenient way.
in a convenient way. Users with aoetools can use the aoe-stat
command.
root@makki root# sh Documentation/aoe/status.sh
e10.0 eth3 up
......@@ -89,3 +101,23 @@ USING SYSFS
e4.7 eth1 up
e4.8 eth1 up
e4.9 eth1 up
Use /sys/module/aoe/parameters/aoe_iflist (or better, the driver
option discussed below) instead of /dev/etherd/interfaces to limit
AoE traffic to the network interfaces in the given
whitespace-separated list. Unlike the old character device, the
sysfs entry can be read from as well as written to.
It's helpful to trigger discovery after setting the list of allowed
interfaces. The aoetools package provides an aoe-discover script
for this purpose. You can also directly use the
/dev/etherd/discover special file described above.
DRIVER OPTIONS
There is a boot option for the built-in aoe driver and a
corresponding module parameter, aoe_iflist. Without this option,
all network interfaces may be used for ATA over Ethernet. Here is a
usage example for the module parameter.
modprobe aoe_iflist="eth1 eth3"
......@@ -14,10 +14,6 @@ test ! -d "$sysd/block" && {
echo "$me Error: sysfs is not mounted" 1>&2
exit 1
}
test -z "`lsmod | grep '^aoe'`" && {
echo "$me Error: aoe module is not loaded" 1>&2
exit 1
}
for d in `ls -d $sysd/block/etherd* 2>/dev/null | grep -v p` end; do
# maybe ls comes up empty, so we use "end"
......
/* Copyright (c) 2004 Coraid, Inc. See COPYING for GPL terms. */
#define VERSION "6"
#define VERSION "10"
#define AOE_MAJOR 152
#define DEVICE_NAME "aoe"
......
......@@ -37,6 +37,13 @@ static ssize_t aoedisk_show_netif(struct gendisk * disk, char *page)
return snprintf(page, PAGE_SIZE, "%s\n", d->ifp->name);
}
/* firmware version */
static ssize_t aoedisk_show_fwver(struct gendisk * disk, char *page)
{
struct aoedev *d = disk->private_data;
return snprintf(page, PAGE_SIZE, "0x%04x\n", (unsigned int) d->fw_ver);
}
static struct disk_attribute disk_attr_state = {
.attr = {.name = "state", .mode = S_IRUGO },
......@@ -50,6 +57,10 @@ static struct disk_attribute disk_attr_netif = {
.attr = {.name = "netif", .mode = S_IRUGO },
.show = aoedisk_show_netif
};
static struct disk_attribute disk_attr_fwver = {
.attr = {.name = "firmware-version", .mode = S_IRUGO },
.show = aoedisk_show_fwver
};
static void
aoedisk_add_sysfs(struct aoedev *d)
......@@ -57,6 +68,7 @@ aoedisk_add_sysfs(struct aoedev *d)
sysfs_create_file(&d->gd->kobj, &disk_attr_state.attr);
sysfs_create_file(&d->gd->kobj, &disk_attr_mac.attr);
sysfs_create_file(&d->gd->kobj, &disk_attr_netif.attr);
sysfs_create_file(&d->gd->kobj, &disk_attr_fwver.attr);
}
void
aoedisk_rm_sysfs(struct aoedev *d)
......@@ -64,6 +76,7 @@ aoedisk_rm_sysfs(struct aoedev *d)
sysfs_remove_link(&d->gd->kobj, "state");
sysfs_remove_link(&d->gd->kobj, "mac");
sysfs_remove_link(&d->gd->kobj, "netif");
sysfs_remove_link(&d->gd->kobj, "firmware-version");
}
static int
......
......@@ -109,25 +109,22 @@ aoedev_set(ulong sysminor, unsigned char *addr, struct net_device *ifp, ulong bu
spin_lock_irqsave(&devlist_lock, flags);
for (d=devlist; d; d=d->next)
if (d->sysminor == sysminor
|| memcmp(d->addr, addr, sizeof d->addr) == 0)
if (d->sysminor == sysminor)
break;
if (d == NULL && (d = aoedev_newdev(bufcnt)) == NULL) {
spin_unlock_irqrestore(&devlist_lock, flags);
printk(KERN_INFO "aoe: aoedev_set: aoedev_newdev failure.\n");
return NULL;
}
} /* if newdev, (d->flags & DEVFL_UP) == 0 for below */
spin_unlock_irqrestore(&devlist_lock, flags);
spin_lock_irqsave(&d->lock, flags);
d->ifp = ifp;
if (d->sysminor != sysminor
|| (d->flags & DEVFL_UP) == 0) {
memcpy(d->addr, addr, sizeof d->addr);
if ((d->flags & DEVFL_UP) == 0) {
aoedev_downdev(d); /* flushes outstanding frames */
memcpy(d->addr, addr, sizeof d->addr);
d->sysminor = sysminor;
d->aoemajor = AOEMAJOR(sysminor);
d->aoeminor = AOEMINOR(sysminor);
......
......@@ -7,6 +7,7 @@
#include <linux/hdreg.h>
#include <linux/blkdev.h>
#include <linux/netdevice.h>
#include <linux/moduleparam.h>
#include "aoe.h"
#define NECODES 5
......@@ -26,6 +27,19 @@ enum {
};
static char aoe_iflist[IFLISTSZ];
module_param_string(aoe_iflist, aoe_iflist, IFLISTSZ, 0600);
MODULE_PARM_DESC(aoe_iflist, "aoe_iflist=\"dev1 [dev2 ...]\"\n");
#ifndef MODULE
static int __init aoe_iflist_setup(char *str)
{
strncpy(aoe_iflist, str, IFLISTSZ);
aoe_iflist[IFLISTSZ - 1] = '\0';
return 1;
}
__setup("aoe_iflist=", aoe_iflist_setup);
#endif
int
is_aoe_netif(struct net_device *ifp)
......@@ -36,7 +50,8 @@ is_aoe_netif(struct net_device *ifp)
if (aoe_iflist[0] == '\0')
return 1;
for (p = aoe_iflist; *p; p = q + strspn(q, WHITESPACE)) {
p = aoe_iflist + strspn(aoe_iflist, WHITESPACE);
for (; *p; p = q + strspn(q, WHITESPACE)) {
q = p + strcspn(p, WHITESPACE);
if (q != p)
len = q - p;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册