blk_rq_merge_ok() is the elevator-neutral part of merge eligibility
test.  blk_try_merge() determines merge direction and expects the
caller to have tested elv_rq_merge_ok() previously.

elv_rq_merge_ok() now wraps blk_rq_merge_ok() and then calls
elv_iosched_allow_merge().  elv_try_merge() is removed and the two
callers are updated to call elv_rq_merge_ok() explicitly followed by
blk_try_merge().  While at it, make rq_merge_ok() functions return
bool.

This is to prepare for plug merge update and doesn't introduce any
behavior change.

This is based on Jens' patch to skip elevator_allow_merge_fn() from
plug merge.
Signed-off-by: NTejun Heo <tj@kernel.org>
LKML-Reference: <4F16F3CA.90904@kernel.dk>
Original-patch-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

mtip32xx: removed the irrelevant argument of mtip_hw_submit_io() and the unused member of struct driver_data

Removed the following:
	* irrelevant argument 'barrier' of mtip_hw_submit_io()
	* unused member 'eh_active' of struct driver_data
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NSam Bradshaw <sbradshaw@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

put_io_context() performed a complex trylock dancing to avoid
deferring ioc release to workqueue.  It was also broken on UP because
trylock was always assumed to succeed which resulted in unbalanced
preemption count.

While there are ways to fix the UP breakage, even the most
pathological microbench (forced ioc allocation and tight fork/exit
loop) fails to show any appreciable performance benefit of the
optimization.  Strip it out.  If there turns out to be workloads which
are affected by this change, simpler optimization from the discussion
thread can be applied later.
Signed-off-by: NTejun Heo <tj@kernel.org>
LKML-Reference: <1328514611.21268.66.camel@sli10-conroe>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

"nframes" comes from the user and "nframes * CD_FRAMESIZE_RAW" can wrap
on 32 bit systems.  That would have been ok if we used the same wrapped
value for the copy, but we use a shifted value.  We should just use the
checked version of copy_to_user() because it's not going to make a
difference to the speed.

Cc: stable@vger.kernel.com
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Meelis reported a warning:

WARNING: at kernel/timer.c:1122 run_timer_softirq+0x199/0x1ec()
Hardware name: 939Dual-SATA2
timer: cfq_idle_slice_timer+0x0/0xaa preempt leak: 00000102 -> 00000103
Modules linked in: sr_mod cdrom videodev media drm_kms_helper ohci_hcd ehci_hcd v4l2_compat_ioctl32 usbcore i2c_ali15x3 snd_seq drm snd_timer snd_seq
Pid: 0, comm: swapper Not tainted 3.3.0-rc2-00110-gd1256667 #176
Call Trace:
 <IRQ>  [<ffffffff81022aaa>] warn_slowpath_common+0x7e/0x96
 [<ffffffff8114c485>] ? cfq_slice_expired+0x1d/0x1d
 [<ffffffff81022b56>] warn_slowpath_fmt+0x41/0x43
 [<ffffffff8114c526>] ? cfq_idle_slice_timer+0xa1/0xaa
 [<ffffffff8114c485>] ? cfq_slice_expired+0x1d/0x1d
 [<ffffffff8102c124>] run_timer_softirq+0x199/0x1ec
 [<ffffffff81047a53>] ? timekeeping_get_ns+0x12/0x31
 [<ffffffff810145fd>] ? apic_write+0x11/0x13
 [<ffffffff81027475>] __do_softirq+0x74/0xfa
 [<ffffffff812f337a>] call_softirq+0x1a/0x30
 [<ffffffff81002ff9>] do_softirq+0x31/0x68
 [<ffffffff810276cf>] irq_exit+0x3d/0xa3
 [<ffffffff81014aca>] smp_apic_timer_interrupt+0x6b/0x77
 [<ffffffff812f2de9>] apic_timer_interrupt+0x69/0x70
 <EOI>  [<ffffffff81040136>] ? sched_clock_cpu+0x73/0x7d
 [<ffffffff81040136>] ? sched_clock_cpu+0x73/0x7d
 [<ffffffff8100801f>] ? default_idle+0x1e/0x32
 [<ffffffff81008019>] ? default_idle+0x18/0x32
 [<ffffffff810008b1>] cpu_idle+0x87/0xd1
 [<ffffffff812de861>] rest_init+0x85/0x89
 [<ffffffff81659a4d>] start_kernel+0x2eb/0x2f8
 [<ffffffff8165926e>] x86_64_start_reservations+0x7e/0x82
 [<ffffffff81659362>] x86_64_start_kernel+0xf0/0xf7

this_q == locked_q is possible. There are two problems here:
1. In UP case, there is preemption counter issue as spin_trylock always
successes.
2. In SMP case, the loop breaks too earlier.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Reported-by: NMeelis Roos <mroos@linux.ee>
Reported-by: NKnut Petersen <Knut_Petersen@t-online.de>
Tested-by: NKnut Petersen <Knut_Petersen@t-online.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Vivek reported a kernel crash:
[   94.217015] BUG: unable to handle kernel NULL pointer dereference at 000000000000001c
[   94.218004] IP: [<ffffffff81142fae>] kmem_cache_free+0x5e/0x200
[   94.218004] PGD 13abda067 PUD 137d52067 PMD 0
[   94.218004] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
[   94.218004] CPU 0
[   94.218004] Modules linked in: [last unloaded: scsi_wait_scan]
[   94.218004]
[   94.218004] Pid: 0, comm: swapper/0 Not tainted 3.2.0+ #16 Hewlett-Packard HP xw6600 Workstation/0A9Ch
[   94.218004] RIP: 0010:[<ffffffff81142fae>]  [<ffffffff81142fae>] kmem_cache_free+0x5e/0x200
[   94.218004] RSP: 0018:ffff88013fc03de0  EFLAGS: 00010006
[   94.218004] RAX: ffffffff81e0d020 RBX: ffff880138b3c680 RCX: 00000001801c001b
[   94.218004] RDX: 00000000003aac1d RSI: ffff880138b3c680 RDI: ffffffff81142fae
[   94.218004] RBP: ffff88013fc03e10 R08: ffff880137830238 R09: 0000000000000001
[   94.218004] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[   94.218004] R13: ffffea0004e2cf00 R14: ffffffff812f6eb6 R15: 0000000000000246
[   94.218004] FS:  0000000000000000(0000) GS:ffff88013fc00000(0000) knlGS:0000000000000000
[   94.218004] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[   94.218004] CR2: 000000000000001c CR3: 00000001395ab000 CR4: 00000000000006f0
[   94.218004] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   94.218004] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   94.218004] Process swapper/0 (pid: 0, threadinfo ffffffff81e00000, task ffffffff81e0d020)
[   94.218004] Stack:
[   94.218004]  0000000000000102 ffff88013fc0db20 ffffffff81e22700 ffff880139500f00
[   94.218004]  0000000000000001 000000000000000a ffff88013fc03e20 ffffffff812f6eb6
[   94.218004]  ffff88013fc03e90 ffffffff810c8da2 ffffffff81e01fd8 ffff880137830240
[   94.218004] Call Trace:
[   94.218004]  <IRQ>
[   94.218004]  [<ffffffff812f6eb6>] icq_free_icq_rcu+0x16/0x20
[   94.218004]  [<ffffffff810c8da2>] __rcu_process_callbacks+0x1c2/0x420
[   94.218004]  [<ffffffff810c9038>] rcu_process_callbacks+0x38/0x250
[   94.218004]  [<ffffffff810405ee>] __do_softirq+0xce/0x3e0
[   94.218004]  [<ffffffff8108ed04>] ? clockevents_program_event+0x74/0x100
[   94.218004]  [<ffffffff81090104>] ? tick_program_event+0x24/0x30
[   94.218004]  [<ffffffff8183ed1c>] call_softirq+0x1c/0x30
[   94.218004]  [<ffffffff8100422d>] do_softirq+0x8d/0xc0
[   94.218004]  [<ffffffff81040c3e>] irq_exit+0xae/0xe0
[   94.218004]  [<ffffffff8183f4be>] smp_apic_timer_interrupt+0x6e/0x99
[   94.218004]  [<ffffffff8183e330>] apic_timer_interrupt+0x70/0x80

Once a queue is quiesced, it's not supposed to have any elvpriv data or
icq's, and elevator switching depends on that.  Request alloc path
followed the rule for elvpriv data but forgot apply it to icq's
leading to the following crash during elevator switch. Fix it by not
allocating icq's if ELVPRIV is not set for the request.
Reported-by: NVivek Goyal <vgoyal@redhat.com>
Tested-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

cfq_slice_expired will change saved_workload_slice. It should be called
first so saved_workload_slice is correctly set to 0 after workload type
is changed.
This fixes the code order changed by 54b466e4.
Tested-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Randy Dunlap reports that we get

  arch/x86/um/shared/sysdep/ptrace.h:7:20: error: redefinition of 'regs_return_value'
  arch/x86/um/shared/sysdep/ptrace.h:7:20: note: previous definition of 'regs_return_value' was here

when compiling UML for x86-64.

Stephen Rothwell root-caused it and says:

 "Caused by commit d7e7528b ("Audit: push audit success and retcode
  into arch ptrace.h") (another patch that was never in linux-next :-().

  This file now needs protection against double inclusion."

so let's do as the man says.
Reported-by: NRandy Dunlap <rdunlap@xenotime.net>
Analyzed-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  ib_srpt: Initial SRP Target merge for v3.3-rc1

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (26 commits)
  target: Set additional sense length field in sense data
  target: Remove legacy device status check from transport_execute_tasks
  target: Remove __transport_execute_tasks() for each processing context
  target: Remove extra se_device->execute_task_lock access in fast path
  target: Drop se_device TCQ queue_depth usage from I/O path
  target: Fix possible NULL pointer with __transport_execute_tasks
  target: Remove TFO->check_release_cmd() fabric API caller
  tcm_fc: Convert ft_send_work to use target_submit_cmd
  target: Add target_submit_cmd() for process context fabric submission
  target: Make target_put_sess_cmd use target_release_cmd_kref
  target: Set response format in INQUIRY response
  target: tcm_mod_builder: small fixups
  Documentation/target: Fix tcm_mod_builder.py build breakage
  target: remove overagressive ____cacheline_aligned annoations
  tcm_loop: bump max_sectors
  target/configs: remove trailing newline from udev_path and alias
  iscsi-target: fix chap identifier simple_strtoul usage
  target: remove useless casts
  target: simplify target_check_cdb_and_preempt
  target: Move core_scsi3_check_cdb_abort_and_preempt
  ...

This includes initial support for the recently published ACPI 5.0 spec.
In particular, support for the "hardware-reduced" bit that eliminates
the dependency on legacy hardware.

APEI has patches resulting from testing on real hardware.

Plus other random fixes.

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (52 commits)
  acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec
  intel_idle: Split up and provide per CPU initialization func
  ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2
  ACPI processor: Remove unneeded cpuidle_unregister_driver call
  intel idle: Make idle driver more robust
  intel_idle: Fix a cast to pointer from integer of different size warning in intel_idle
  ACPI: kernel-parameters.txt : Add intel_idle.max_cstate
  intel_idle: remove redundant local_irq_disable() call
  ACPI processor: Fix error path, also remove sysdev link
  ACPI: processor: fix acpi_get_cpuid for UP processor
  intel_idle: fix API misuse
  ACPI APEI: Convert atomicio routines
  ACPI: Export interfaces for ioremapping/iounmapping ACPI registers
  ACPI: Fix possible alignment issues with GAS 'address' references
  ACPI, ia64: Use SRAT table rev to use 8bit or 16/32bit PXM fields (ia64)
  ACPI, x86: Use SRAT table rev to use 8bit or 32bit PXM fields (x86/x86-64)
  ACPI: Store SRAT table revision
  ACPI, APEI, Resolve false conflict between ACPI NVS and APEI
  ACPI, Record ACPI NVS regions
  ACPI, APEI, EINJ, Refine the fix of resource conflict
  ...

This patch fixes an (ACPI S3) suspend regression introduced in commit
68d6e671 ("tpm: Introduce function to poll for result of self test")
and occurring with an Infineon TPM and tpm_tis and tpm_infineon drivers
active.

The suspend problem occurred if the TPM was disabled and/or deactivated
and therefore the TPM_PCRRead checking the result of the (asynchronous)
self test returned an error code which then caused the tpm_tis driver to
become inactive and this then seemed to have negatively influenced the
suspend support by the tpm_infineon driver...  Besides that the tpm_tis
drive may stay active even if the TPM is disabled and/or deactivated.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Tested-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NRajiv Andrade <srajiv@linux.vnet.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The type of 'make_request_fn' changed in 5a7bbad2 ("block: remove
support for bio remapping from ->make_request"), but the merge of the
nvme driver didn't take that into account, and as a result the driver
would compile with a warning:

  drivers/block/nvme.c: In function 'nvme_alloc_ns':
  drivers/block/nvme.c:1336:2: warning: passing argument 2 of 'blk_queue_make_request' from incompatible pointer type [enabled by default]
  include/linux/blkdev.h:830:13: note: expected 'void (*)(struct request_queue *, struct bio *)' but argument is of type 'int (*)(struct request_queue *, struct bio *)'

It's benign, but the warning is annoying.
Reported-by: NStephen Rothwell <sfr@canb.auug.org>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix these warnings:

  drivers/xen/biomerge.c:14:1: warning: data definition has no type or storage class [enabled by default]
  drivers/xen/biomerge.c:14:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int]
  drivers/xen/biomerge.c:14:1: warning: parameter names (without types) in function declaration [enabled by default]

And this build error:

  ERROR: "xen_biovec_phys_mergeable" [drivers/block/nvme.ko] undefined!
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus/i2c-33' of git://git.fluff.org/bjdooks/linux:
  i2c-eg20t: Change-company-name-OKI-SEMICONDUCTOR to LAPIS Semiconductor
  i2c-eg20t: Support new device LAPIS Semiconductor ML7831 IOH
  i2c-eg20t: modified the setting of transfer rate.
  i2c-eg20t: use i2c_add_numbered_adapter to get a fixed bus number
  i2c: OMAP: Add DT support for i2c controller
  I2C: OMAP: NACK without STP
  I2C: OMAP: correct SYSC register offset for OMAP4

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (57 commits)
  [media] as3645a: Fix compilation by including slab.h
  [media] s5p-fimc: Remove linux/version.h include from fimc-mdevice.c
  [media] s5p-mfc: Remove linux/version.h include from s5p_mfc.c
  [media] ds3000: using logical && instead of bitwise &
  [media] v4l2-ctrls: make control names consistent
  [media] DVB: dib0700, add support for Nova-TD LEDs
  [media] DVB: dib0700, add corrected Nova-TD frontend_attach
  [media] DVB: dib0700, separate stk7070pd initialization
  [media] DVB: dib0700, move Nova-TD Stick to a separate set
  [media] : add MODULE_FIRMWARE to dib0700
  [media] DVB-CORE: remove superfluous DTV_CMDs
  [media] s5p-jpeg: adapt to recent videobuf2 changes
  [media] s5p-g2d: fixed a bug in controls setting function
  [media] s5p-mfc: Fix volatile controls setup
  [media] drivers/media/video/s5p-mfc/s5p_mfc.c: adjust double test
  [media] drivers/media/video/s5p-fimc/fimc-capture.c: adjust double test
  [media] s5p-fimc: Fix incorrect control ID assignment
  [media] dvb_frontend: Don't call get_frontend() if idle
  [media] DocBook/dvbproperty.xml: Remove DTV_MODULATION from ISDB-T
  [media] DocBook/dvbproperty.xml: Fix ISDB-T delivery system parameters
  ...

* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: Wait for WM8993 FLL to stabilise
  ASoC: core - Free platform DAPM context at platform removal.
  ASoC: dapm - Fix check for codec context in dapm_power_widgets().
  ASoC: sgtl5000: update author email address
  ASoC: Fix DMA channel leak in imx-pcm-dma-mx2 driver.

SCSI updates on 20120118

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (49 commits)
  [SCSI] libfc: remove redundant timer init for fcp
  [SCSI] fcoe: Move fcoe_debug_logging from fcoe.h to fcoe.c
  [SCSI] libfc: Declare local functions static
  [SCSI] fcoe: fix regression on offload em matching function for initiator/target
  [SCSI] qla4xxx: Update driver version to 5.02.00-k12
  [SCSI] qla4xxx: Cleanup modinfo display
  [SCSI] qla4xxx: Update license
  [SCSI] qla4xxx: Clear the RISC interrupt bit during FW init
  [SCSI] qla4xxx: Added error logging for firmware abort
  [SCSI] qla4xxx: Disable generating pause frames in case of FW hung
  [SCSI] qla4xxx: Temperature monitoring for ISP82XX core.
  [SCSI] megaraid: fix sparse warnings
  [SCSI] sg: convert to kstrtoul_from_user()
  [SCSI] don't change sdev starvation list order without request dispatched
  [SCSI] isci: fix, prevent port from getting stuck in the 'configuring' state
  [SCSI] isci: fix start OOB
  [SCSI] isci: fix io failures while wide port links are coming up
  [SCSI] isci: allow more time for wide port targets
  [SCSI] isci: enable wide port targets
  [SCSI] isci: Fix IO fails when pull cable from phy in x4 wideport in MPC mode.
  ...

* git://git.infradead.org/users/willy/linux-nvme: (105 commits)
  NVMe: Set number of queues correctly
  NVMe: Version 0.8
  NVMe: Set queue flags correctly
  NVMe: Simplify nvme_unmap_user_pages
  NVMe: Mark the end of the sg list
  NVMe: Fix DMA mapping for admin commands
  NVMe: Rename IO_TIMEOUT to NVME_IO_TIMEOUT
  NVMe: Merge the nvme_bio and nvme_prp data structures
  NVMe: Change nvme_completion_fn to take a dev
  NVMe: Change get_nvmeq to take a dev instead of a namespace
  NVMe: Simplify completion handling
  NVMe: Update Identify Controller data structure
  NVMe: Implement doorbell stride capability
  NVMe: Version 0.7
  NVMe: Don't probe namespace 0
  Fix calculation of number of pages in a PRP List
  NVMe: Create nvme_identify and nvme_get_features functions
  NVMe: Fix memory leak in nvme_dev_add()
  NVMe: Fix calls to dma_unmap_sg
  NVMe: Correct sg list setup in nvme_map_user_pages
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits)
  tg3: Fix single-vector MSI-X code
  openvswitch: Fix multipart datapath dumps.
  ipv6: fix per device IP snmp counters
  inetpeer: initialize ->redirect_genid in inet_getpeer()
  net: fix NULL-deref in WARN() in skb_gso_segment()
  net: WARN if skb_checksum_help() is called on skb requiring segmentation
  caif: Remove bad WARN_ON in caif_dev
  caif: Fix typo in Vendor/Product-ID for CAIF modems
  bnx2x: Disable AN KR work-around for BCM57810
  bnx2x: Remove AutoGrEEEn for BCM84833
  bnx2x: Remove 100Mb force speed for BCM84833
  bnx2x: Fix PFC setting on BCM57840
  bnx2x: Fix Super-Isolate mode for BCM84833
  net: fix some sparse errors
  net: kill duplicate included header
  net: sh-eth: Fix build error by the value which is not defined
  net: Use device model to get driver name in skb_gso_segment()
  bridge: BH already disabled in br_fdb_cleanup()
  net: move sock_update_memcg outside of CONFIG_INET
  mwl8k: Fixing Sparse ENDIAN CHECK warning
  ...

ACPI 5.0 provides extensions to the EINJ mechanism to specify the
target for the error injection - by APICID for cpu related errors,
by address for memory related errors, and by segment/bus/device/function
for PCIe related errors. Also extensions for vendor specific error
injections.
Tested-by: NChen Gong <gong.chen@linux.intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Function split up, should have no functional change.

Provides entry point for physically hotplugged CPUs
to initialize and activate cpuidle.
Signed-off-by: NThomas Renninger <trenn@suse.de>
CC: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
CC: Shaohua Li <shaohua.li@intel.com>
CC: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

V2: Fix typo: pr->handle -> pr, here: acpi_processor_hotadd_init(pr)

This is a very small part taken from patches which afaik
are coming from Yunhong Jiang (for a Xen not a Linus repo?).

Cleanup only: no functional change.

Advantage (beside cleanup) is that other data of the pr (acpi_processor) struct
in the acpi_processor_hotadd_init() is needed later, for example a newly
introduced flag:
pr->flags.need_hotplug_init
Signed-off-by: NThomas Renninger <trenn@suse.de>
CC: Bjorn Helgaas <bhelgaas@google.com>
CC: Jiang, Yunhong <yunhong.jiang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Kdump kernels leave MSI-X interrupts (as setup by the crashed kernel)
enabled.  However, kdump only enables one CPU in the new environment,
thus causing tg3 to abort MSI-X setup.  When the driver attempts to
enable INTA or MSI interrupt modes on a kdump kernel, interrupt
delivery fails.

This patch attempts to workaround the problem by forcing the driver
to enable a single MSI-X interrupt.  In such a configuration, the
device's multivector interrupt mode must be disabled.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The logic to split up the list of datapaths into multiple Netlink messages
was simply wrong, causing the list to be terminated after the first part.
Only about the first 50 datapaths would be dumped.  This fixes the
problem.
Reported-by: NPaul Ingram <paul@nicira.com>
Signed-off-by: NBen Pfaff <blp@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In commit 4ce3c183 (snmp: 64bit ipstats_mib for all arches), I forgot
to change the /proc/net/dev_snmp6/xxx output for IP counters.

percpu array is 64bit per counter but the folding still used the 'long'
variant, and output garbage on 32bit arches.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ARM: fixes for ARM platforms

Some fallout from the 3.3. merge window as well as a couple bug fixes
for older preexisting bugs that seem valid to include at this time:

* sched_clock changes broke picoxcell, fix included
* BSYM bugs causing issues with thumb2-built kernels on SMP
* Missing module.h include on msm.
* A collection of bugfixes for samsung platforms that didn't make it into
  the first pull requests.

* tag 'arm-soc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: make BSYM macro assembly only
  ARM: highbank: remove incorrect BSYM usage
  ARM: imx: remove incorrect BSYM usage
  ARM: exynos: remove incorrect BSYM usage
  ARM: ux500: add missing ENDPROC to headsmp.S
  ARM: msm: Add missing ENDPROC to headsmp.S
  ARM: versatile: Add missing ENDPROC to headsmp.S
  ARM: EXYNOS: Invert VCLK polarity for framebuffer on ORIGEN
  ARM: S3C64XX: Fix interrupt configuration for PCA935x on Cragganmore
  ARM: S3C64XX: Fix the memory mapped GPIOs on Cragganmore
  ARM: S3C64XX: Remove hsmmc1 from Cragganmore
  ARM: S3C64XX: Remove unconditional power domain disables
  ARM: SAMSUNG: Declare struct platform_device in plat/s3c64xx-spi.h
  ARM: SAMSUNG: dma-ops.h needs mach/dma.h
  ARM: SAMSUNG: Guard against multiple inclusion of plat/dma.h
  ARM: picoxcell: fix sched_clock() cleanup fallout
  ARM: msm: vreg is a module and so needs module.h

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits)
  ARM: mach-shmobile: specify CHCLR registers on SH7372
  dma: shdma: fix runtime PM: clear channel buffers on reset
  dma/imx-sdma: save irq flags when use spin_lock in sdma_tx_submit
  dmaengine/ste_dma40: clear LNK on channel startup
  dmaengine: intel_mid_dma: remove legacy pm interface
  ASoC: mxs: correct 'direction' of device_prep_dma_cyclic
  dmaengine: intel_mid_dma: error path fix
  dmaengine: intel_mid_dma: locking and freeing fixes
  mtd: gpmi-nand: move to dma_transfer_direction
  mtd: fix compile error for gpmi-nand
  mmc: mxs-mmc: fix the dma_transfer_direction migration
  dmaengine: add DMA_TRANS_NONE to dma_transfer_direction
  dma: mxs-dma: Don't use CLKGATE bits in CTRL0 to disable DMA channels
  dma: mxs-dma: make mxs_dma_prep_slave_sg() multi user safe
  dma: mxs-dma: Always leave mxs_dma_init() with the clock disabled.
  dma: mxs-dma: fix a typo in comment
  DMA: PL330: Remove pm_runtime_xxx calls from pl330 probe/remove
  video i.MX IPU: Fix display connections
  i.MX IPU DMA: Fix wrong burstsize settings
  dmaengine/ste_dma40: allow fixed physical channel
  ...

Fix up conflicts in drivers/dma/{Kconfig,mxs-dma.c,pl330.c}

The conflicts looked pretty trivial, but I'll ask people to verify them.

* 'upstream-linus' of git://github.com/jgarzik/libata-dev:
  [libata] ata_piix: Add Toshiba Satellite Pro A120 to the quirks list due to broken suspend functionality.
  [libata] add DVRTD08A and DVR-215 to NOSETXFER device quirk list
  [libata] pata_bf54x: Support sg list in bmdma transfer.
  [libata] sata_fsl: fix the controller operating mode
  [libata] enable ata port async suspend

JONGMAN HEO reports:

  With current linus git (commit a25a2b84), I got following build error,

  arch/x86/kernel/vm86_32.c: In function 'do_sys_vm86':
  arch/x86/kernel/vm86_32.c:340: error: implicit declaration of function '__audit_syscall_exit'
  make[3]: *** [arch/x86/kernel/vm86_32.o] Error 1

OK, I can reproduce it (32bit allmodconfig with AUDIT=y, AUDITSYSCALL=n)

It's due to commit d7e7528b: "Audit: push audit success and retcode
into arch ptrace.h".
Reported-by: NJONGMAN HEO <jongman.heo@samsung.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

due to broken suspend functionality.
Signed-off-by: NBenjamin Larsson <benjamin@southpole.se>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

BF54x on-chip ATAPI controller allows maximum 0x1fffe bytes to be transfered
in one ATAPI transfer. So, set the max sg_tablesize to 4.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Configure the FSL SATA controller to the preferred, enterprise mode.
Signed-off-by: NYutaka Ando <r46913@freescale.com>
Signed-off-by: NJerry Huang <Chang-Ming.Huang@freescale.com>
CC: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This saves devices suspend/resume time.

Tested system suspend/resume with SATA IDE/AHCI mode 3 times.
Below is the time took for devices suspend/resume.

SATA mode    vanilla-kernel           patched-kernel
---------    ---------------------    ---------------------
IDE          suspend: 0.744           suspend: 0.432
             (0.716, 0.768, 0.748)    (0.440, 0.428, 0.428)

             resume: 5.084            resume: 2.209
             (5.100, 5.064, 5.088)    (2.168, 2.232, 2.228)

AHCI:        suspend: 0.725           suspend: 0.449
             (0.740, 0.708, 0.728)    (0.456, 0.448, 0.444)

             resume: 2.556            resume: 1.896
             (2.604, 2.492, 2.572)    (1.932, 1.872, 1.884)
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The as3645a driver calls kzalloc(). Include slab.h.
Reported-by: NFredrik Lingvall <fredrik.lingvall@gmail.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>