Skip to content

L
linux

xiphi1978 / linux

通知 2
Star 0
Fork 0
L
linux

体验新版 GitCode，发现更多精彩内容 >>

提交 d3d07d94 编写于 作者: L Linus Torvalds
浏览文件
操作

Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (266 commits)
  sh: Tie sparseirq in to Kconfig.
  sh: Wire up sys_rt_tgsigqueueinfo.
  sh: Fix sys_pwritev() syscall table entry for sh32.
  sh: Fix sh4a llsc-based cmpxchg()
  sh: sh7724: Add JPU support
  sh: sh7724: INTC setting update
  sh: sh7722 clock framework rewrite
  sh: sh7366 clock framework rewrite
  sh: sh7343 clock framework rewrite
  sh: sh7724 clock framework rewrite V3
  sh: sh7723 clock framework rewrite V2
  sh: add enable()/disable()/set_rate() to div6 code
  sh: add AP325RXA mode pin configuration
  sh: add Migo-R mode pin configuration
  sh: sh7722 mode pin definitions
  sh: sh7724 mode pin comments
  sh: sh7723 mode pin V2
  sh: rework mode pin code
  sh: clock div6 helper code
  sh: clock div4 frequency table offset fix
  ...
上级 6cd8e300 54ff328b
展开全部 隐藏空白更改
内联 并排
Showing with 18185 addition and 7147 deletion
arch/sh/Kconfig
浏览文件 @ d3d07d94
......@@ -15,6 +15,7 @@ config SUPERH
select HAVE_IOREMAP_PROT if MMU
select HAVE_ARCH_TRACEHOOK
select HAVE_DMA_API_DEBUG
select RTC_LIB
help
The SuperH is a RISC processor targeted for use in embedded systems
and consumer electronics; it was also used in the Sega Dreamcast
......@@ -74,14 +75,18 @@ config GENERIC_IOMAP
bool
config GENERIC_TIME
def_bool n
def_bool y
config GENERIC_CLOCKEVENTS
def_bool n
def_bool y
config GENERIC_CLOCKEVENTS_BROADCAST
bool
config GENERIC_CMOS_UPDATE
def_bool y
depends on SH_SH03 || SH_DREAMCAST
config GENERIC_LOCKBREAK
def_bool y
depends on SMP && PREEMPT
......@@ -112,6 +117,12 @@ config SYS_SUPPORTS_PCI
config SYS_SUPPORTS_CMT
bool
config SYS_SUPPORTS_MTU2
bool
config SYS_SUPPORTS_TMU
bool
config STACKTRACE_SUPPORT
def_bool y
......@@ -157,13 +168,14 @@ config CPU_SH3
bool
select CPU_HAS_INTEVT
select CPU_HAS_SR_RB
select SYS_SUPPORTS_TMU
config CPU_SH4
bool
select CPU_HAS_INTEVT
select CPU_HAS_SR_RB
select CPU_HAS_PTEA if !CPU_SH4A || CPU_SHX2
select CPU_HAS_FPU if !CPU_SH4AL_DSP
select SYS_SUPPORTS_TMU
config CPU_SH4A
bool
......@@ -177,6 +189,7 @@ config CPU_SH4AL_DSP
config CPU_SH5
bool
select CPU_HAS_FPU
select SYS_SUPPORTS_TMU
config CPU_SHX2
bool
......@@ -210,27 +223,32 @@ config CPU_SUBTYPE_SH7201
bool "Support SH7201 processor"
select CPU_SH2A
select CPU_HAS_FPU
select SYS_SUPPORTS_MTU2
config CPU_SUBTYPE_SH7203
bool "Support SH7203 processor"
select CPU_SH2A
select CPU_HAS_FPU
select SYS_SUPPORTS_CMT
select SYS_SUPPORTS_MTU2
config CPU_SUBTYPE_SH7206
bool "Support SH7206 processor"
select CPU_SH2A
select SYS_SUPPORTS_CMT
select SYS_SUPPORTS_MTU2
config CPU_SUBTYPE_SH7263
bool "Support SH7263 processor"
select CPU_SH2A
select CPU_HAS_FPU
select SYS_SUPPORTS_CMT
select SYS_SUPPORTS_MTU2
config CPU_SUBTYPE_MXG
bool "Support MX-G processor"
select CPU_SH2A
select SYS_SUPPORTS_MTU2
help
Select MX-G if running on an R8A03022BG part.
......@@ -283,6 +301,7 @@ config CPU_SUBTYPE_SH7720
bool "Support SH7720 processor"
select CPU_SH3
select CPU_HAS_DSP
select SYS_SUPPORTS_CMT
help
Select SH7720 if you have a SH3-DSP SH7720 CPU.
......@@ -290,6 +309,7 @@ config CPU_SUBTYPE_SH7721
bool "Support SH7721 processor"
select CPU_SH3
select CPU_HAS_DSP
select SYS_SUPPORTS_CMT
help
Select SH7721 if you have a SH3-DSP SH7721 CPU.
......@@ -347,6 +367,16 @@ config CPU_SUBTYPE_SH7723
help
Select SH7723 if you have an SH-MobileR2 CPU.
config CPU_SUBTYPE_SH7724
bool "Support SH7724 processor"
select CPU_SH4A
select CPU_SHX2
select ARCH_SHMOBILE
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_CMT
help
Select SH7724 if you have an SH-MobileR2R CPU.
config CPU_SUBTYPE_SH7763
bool "Support SH7763 processor"
select CPU_SH4A
......@@ -442,48 +472,26 @@ source "arch/sh/boards/Kconfig"
menu "Timer and clock configuration"
config SH_TMU
bool "TMU timer support"
depends on CPU_SH3 || CPU_SH4
config SH_TIMER_TMU
bool "TMU timer driver"
depends on SYS_SUPPORTS_TMU
default y
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
help
This enables the use of the TMU as the system timer.
This enables the build of the TMU timer driver.
config SH_CMT
bool "CMT timer support"
depends on SYS_SUPPORTS_CMT && CPU_SH2
config SH_TIMER_CMT
bool "CMT timer driver"
depends on SYS_SUPPORTS_CMT
default y
help
This enables the use of the CMT as the system timer.
This enables build of the CMT timer driver.
#
# Support for the new-style CMT driver. This will replace SH_CMT
# once its other dependencies are merged.
#
config SH_TIMER_CMT
bool "CMT clockevents driver"
depends on SYS_SUPPORTS_CMT && !SH_CMT
select GENERIC_CLOCKEVENTS
config SH_MTU2
bool "MTU2 timer support"
depends on CPU_SH2A
config SH_TIMER_MTU2
bool "MTU2 timer driver"
depends on SYS_SUPPORTS_MTU2
default y
help
This enables the use of the MTU2 as the system timer.
config SH_TIMER_IRQ
int
default "28" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 || \
CPU_SUBTYPE_SH7763
default "86" if CPU_SUBTYPE_SH7619
default "140" if CPU_SUBTYPE_SH7206
default "142" if CPU_SUBTYPE_SH7203 && SH_CMT
default "153" if CPU_SUBTYPE_SH7203 && SH_MTU2
default "238" if CPU_SUBTYPE_MXG
default "16"
This enables build of the MTU2 timer driver.
config SH_PCLK_FREQ
int "Peripheral clock frequency (in Hz)"
......@@ -494,7 +502,7 @@ config SH_PCLK_FREQ
CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 || \
CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG || \
CPU_SUBTYPE_SH7786
CPU_SUBTYPE_SH7786 || CPU_SUBTYPE_SH7724
default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
default "66000000" if CPU_SUBTYPE_SH4_202
default "50000000"
......@@ -503,6 +511,13 @@ config SH_PCLK_FREQ
This is necessary for determining the reference clock value on
platforms lacking an RTC.
config SH_CLK_CPG
def_bool y
config SH_CLK_CPG_LEGACY
depends on SH_CLK_CPG
def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE
config SH_CLK_MD
int "CPU Mode Pin Setting"
depends on CPU_SH2
......@@ -663,27 +678,54 @@ config GUSA_RB
LLSC, this should be more efficient than the other alternative of
disabling interrupts around the atomic sequence.
config SPARSE_IRQ
bool "Support sparse irq numbering"
depends on EXPERIMENTAL
help
This enables support for sparse irqs. This is useful in general
as most CPUs have a fairly sparse array of IRQ vectors, which
the irq_desc then maps directly on to. Systems with a high
number of off-chip IRQs will want to treat this as
experimental until they have been independently verified.
If you don't know what to do here, say N.
endmenu
menu "Boot options"
config ZERO_PAGE_OFFSET
hex "Zero page offset"
default "0x00004000" if SH_SH03
default "0x00010000" if PAGE_SIZE_64KB
hex
default "0x00010000" if PAGE_SIZE_64KB || SH_RTS7751R2D || \
SH_7751_SOLUTION_ENGINE
default "0x00004000" if PAGE_SIZE_16KB || SH_SH03
default "0x00002000" if PAGE_SIZE_8KB
default "0x00001000"
help
This sets the default offset of zero page.
config BOOT_LINK_OFFSET
hex "Link address offset for booting"
hex
default "0x00210000" if SH_SHMIN
default "0x00400000" if SH_CAYMAN
default "0x00810000" if SH_7780_SOLUTION_ENGINE
default "0x009e0000" if SH_TITAN
default "0x01800000" if SH_SDK7780
default "0x02000000" if SH_EDOSK7760
default "0x00800000"
help
This option allows you to set the link address offset of the zImage.
This can be useful if you are on a board which has a small amount of
memory.
config ENTRY_OFFSET
hex
default "0x00001000" if PAGE_SIZE_4KB
default "0x00002000" if PAGE_SIZE_8KB
default "0x00004000" if PAGE_SIZE_16KB
default "0x00010000" if PAGE_SIZE_64KB
default "0x00000000"
config UBC_WAKEUP
bool "Wakeup UBC on startup"
depends on CPU_SH4 && !CPU_SH4A
......
arch/sh/Kconfig.cpu
浏览文件 @ d3d07d94
......@@ -76,11 +76,6 @@ config SPECULATIVE_EXECUTION
If unsure, say N.
config SH64_USER_MISALIGNED_FIXUP
def_bool y
prompt "Fixup misaligned loads/stores occurring in user mode"
depends on SUPERH64
config SH64_ID2815_WORKAROUND
bool "Include workaround for SH5-101 cut2 silicon defect ID2815"
depends on CPU_SUBTYPE_SH5_101
......@@ -101,9 +96,6 @@ config CPU_HAS_SR_RB
See <file:Documentation/sh/register-banks.txt> for further
information on SR.RB and register banking in the kernel in general.
config CPU_HAS_PTEA
bool
config CPU_HAS_PTEAEX
bool
......
arch/sh/Kconfig.debug
浏览文件 @ d3d07d94
......@@ -38,10 +38,10 @@ config EARLY_SCIF_CONSOLE_PORT
default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \
CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \
CPU_SUBTYPE_SH7343
default "0xffe80000" if CPU_SH4
default "0xffea0000" if CPU_SUBTYPE_SH7785
default "0xfffe8000" if CPU_SUBTYPE_SH7203
default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263
default "0xffe80000" if CPU_SH4
default "0x00000000"
config EARLY_PRINTK
......@@ -92,7 +92,7 @@ config 4KSTACKS
config IRQSTACKS
bool "Use separate kernel stacks when processing interrupts"
depends on DEBUG_KERNEL && SUPERH32
depends on DEBUG_KERNEL && SUPERH32 && BROKEN
help
If you say Y here the kernel will use separate kernel stacks
for handling hard and soft interrupts. This can help avoid
......@@ -122,27 +122,8 @@ config SH_NO_BSS_INIT
For all other cases, say N. If this option seems perplexing, or
you aren't sure, say N.
config MORE_COMPILE_OPTIONS
bool "Add any additional compile options"
help
If you want to add additional CFLAGS to the kernel build, enable this
option and then enter what you would like to add in the next question.
Note however that -g is already appended with the selection of KGDB.
config COMPILE_OPTIONS
string "Additional compile arguments"
depends on MORE_COMPILE_OPTIONS
config SH64_SR_WATCH
bool "Debug: set SR.WATCH to enable hardware watchpoints and trace"
depends on SUPERH64
config POOR_MANS_STRACE
bool "Debug: enable rudimentary strace facility"
depends on SUPERH64
help
This option allows system calls to be traced to the console. It also
aids in detecting kernel stack underflow. It is useful for debugging
early-userland problems (e.g. init incurring fatal exceptions.)
endmenu
arch/sh/Makefile
浏览文件 @ d3d07d94
......@@ -70,9 +70,6 @@ cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml
cflags-y += $(call cc-option,-mno-fdpic)
cflags-y += $(isaflags-y) -ffreestanding
cflags-$(CONFIG_MORE_COMPILE_OPTIONS) += \
$(shell echo $(CONFIG_COMPILE_OPTIONS) | sed -e 's/"//g')
OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment \
-R .stab -R .stabstr -S
......@@ -85,7 +82,6 @@ defaultimage-$(CONFIG_SH_7206_SOLUTION_ENGINE) := vmlinux
defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE) := vmlinux
# Set some sensible Kbuild defaults
KBUILD_DEFCONFIG := shx3_defconfig
KBUILD_IMAGE := $(defaultimage-y)
#
......@@ -93,26 +89,38 @@ KBUILD_IMAGE := $(defaultimage-y)
# error messages during linking.
#
ifdef CONFIG_SUPERH32
UTS_MACHINE := sh
LDFLAGS_vmlinux += -e _stext
UTS_MACHINE := sh
BITS := 32
LDFLAGS_vmlinux += -e _stext
KBUILD_DEFCONFIG := shx3_defconfig
else
UTS_MACHINE := sh64
LDFLAGS_vmlinux += --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \
--defsym phys_stext_shmedia=phys_stext+1 \
-e phys_stext_shmedia
UTS_MACHINE := sh64
BITS := 64
LDFLAGS_vmlinux += --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \
--defsym phys_stext_shmedia=phys_stext+1 \
-e phys_stext_shmedia
KBUILD_DEFCONFIG := cayman_defconfig
endif
ifneq ($(SUBARCH),$(ARCH))
ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE := $(call cc-cross-prefix, $(UTS_MACHINE)-linux- $(UTS_MACHINE)-linux-gnu- $(UTS_MACHINE)-unknown-linux-gnu-)
endif
endif
ifdef CONFIG_CPU_LITTLE_ENDIAN
LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64'
ld-bfd := elf32-$(UTS_MACHINE)-linux
LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64' --oformat $(ld-bfd)
LDFLAGS += -EL
else
LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64+4'
ld-bfd := elf32-$(UTS_MACHINE)big-linux
LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64+4' --oformat $(ld-bfd)
LDFLAGS += -EB
endif
head-y := arch/sh/kernel/init_task.o
head-$(CONFIG_SUPERH32) += arch/sh/kernel/head_32.o
head-$(CONFIG_SUPERH64) += arch/sh/kernel/head_64.o
export ld-bfd BITS
head-y := arch/sh/kernel/init_task.o arch/sh/kernel/head_$(BITS).o
core-y += arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/
core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/
......@@ -193,10 +201,11 @@ zImage uImage uImage.srec vmlinux.srec: vmlinux
compressed: zImage
archprepare: maketools arch/sh/lib64/syscalltab.h
archprepare: maketools
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
$(Q)$(MAKE) $(clean)=arch/sh/kernel/vsyscall
define archhelp
@echo '* zImage - Compressed kernel image'
......@@ -205,34 +214,4 @@ define archhelp
@echo ' uImage.srec - Create an S-record for U-Boot'
endef
define filechk_gen-syscalltab
(set -e; \
echo "/*"; \
echo " * DO NOT MODIFY."; \
echo " *"; \
echo " * This file was generated by arch/sh/Makefile"; \
echo " * Any changes will be reverted at build time."; \
echo " */"; \
echo ""; \
echo "#ifndef __SYSCALLTAB_H"; \
echo "#define __SYSCALLTAB_H"; \
echo ""; \
echo "#include <linux/kernel.h>"; \
echo ""; \
echo "struct syscall_info {"; \
echo " const char *name;"; \
echo "} syscall_info_table[] = {"; \
sed -e '/^.*\.long /!d;s// { "/;s/\(\([^/]*\)\/\)\{1\}.*/\2/; \
s/[ \t]*$$//g;s/$$/" },/;s/\("\)sys_/\1/g'; \
echo "};"; \
echo ""; \
echo "#define NUM_SYSCALL_INFO_ENTRIES ARRAY_SIZE(syscall_info_table)";\
echo ""; \
echo "#endif /* __SYSCALLTAB_H */" )
endef
arch/sh/lib64/syscalltab.h: arch/sh/kernel/syscalls_64.S
$(call filechk,gen-syscalltab)
CLEAN_FILES += arch/sh/lib64/syscalltab.h \
include/asm-sh/machtypes.h
CLEAN_FILES += include/asm-sh/machtypes.h
arch/sh/boards/Kconfig
浏览文件 @ d3d07d94
......@@ -46,6 +46,15 @@ config SH_7722_SOLUTION_ENGINE
Select 7722 SolutionEngine if configuring for a Hitachi SH772
evaluation board.
config SH_7724_SOLUTION_ENGINE
bool "SolutionEngine7724"
select SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7724
select ARCH_REQUIRE_GPIOLIB
help
Select 7724 SolutionEngine if configuring for a Hitachi SH7724
evaluation board.
config SH_7751_SOLUTION_ENGINE
bool "SolutionEngine7751"
select SOLUTION_ENGINE
......@@ -121,7 +130,7 @@ config SH_RTS7751R2D
bool "RTS7751R2D"
depends on CPU_SUBTYPE_SH7751R
select SYS_SUPPORTS_PCI
select IO_TRAPPED
select IO_TRAPPED if MMU
help
Select RTS7751R2D if configuring for a Renesas Technology
Sales SH-Graphics board.
......@@ -145,13 +154,13 @@ config SH_HIGHLANDER
bool "Highlander"
depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
select SYS_SUPPORTS_PCI
select IO_TRAPPED
select IO_TRAPPED if MMU
config SH_SH7785LCR
bool "SH7785LCR"
depends on CPU_SUBTYPE_SH7785
select SYS_SUPPORTS_PCI
select IO_TRAPPED
select IO_TRAPPED if MMU
config SH_SH7785LCR_29BIT_PHYSMAPS
bool "SH7785LCR 29bit physmaps"
......
arch/sh/boards/board-ap325rxa.c
浏览文件 @ d3d07d94
......@@ -535,6 +535,18 @@ static int __init ap325rxa_devices_setup(void)
}
device_initcall(ap325rxa_devices_setup);
/* Return the board specific boot mode pin configuration */
static int ap325rxa_mode_pins(void)
{
/* MD0=0, MD1=0, MD2=0: Clock Mode 0
* MD3=0: 16-bit Area0 Bus Width
* MD5=1: Little Endian
* TSTMD=1, MD8=1: Test Mode Disabled
*/
return MODE_PIN5 | MODE_PIN8;
}
static struct sh_machine_vector mv_ap325rxa __initmv = {
.mv_name = "AP-325RXA",
.mv_mode_pins = ap325rxa_mode_pins,
};
arch/sh/boards/board-sh7785lcr.c
浏览文件 @ d3d07d94
......@@ -2,12 +2,12 @@
* Renesas Technology Corp. R0P7785LC0011RL Support.
*
* Copyright (C) 2008 Yoshihiro Shimoda
* Copyright (C) 2009 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/sm501.h>
......@@ -19,8 +19,12 @@
#include <linux/i2c-pca-platform.h>
#include <linux/i2c-algo-pca.h>
#include <linux/irq.h>
#include <asm/heartbeat.h>
#include <linux/clk.h>
#include <linux/errno.h>
#include <mach/sh7785lcr.h>
#include <asm/heartbeat.h>
#include <asm/clock.h>
#include <cpu/sh7785.h>
/*
* NOTE: This board has 2 physical memory maps.
......@@ -273,6 +277,20 @@ void __init init_sh7785lcr_IRQ(void)
plat_irq_setup_pins(IRQ_MODE_IRQ3210);
}
static int sh7785lcr_clk_init(void)
{
struct clk *clk;
int ret;
clk = clk_get(NULL, "extal");
if (!clk || IS_ERR(clk))
return PTR_ERR(clk);
ret = clk_set_rate(clk, 33333333);
clk_put(clk);
return ret;
}
static void sh7785lcr_power_off(void)
{
unsigned char *p;
......@@ -303,12 +321,34 @@ static void __init sh7785lcr_setup(char **cmdline_p)
writel(0x000307c2, sm501_reg);
}
/* Return the board specific boot mode pin configuration */
static int sh7785lcr_mode_pins(void)
{
int value = 0;
/* These are the factory default settings of S1 and S2.
* If you change these dip switches then you will need to
* adjust the values below as well.
*/
value |= MODE_PIN4; /* Clock Mode 16 */
value |= MODE_PIN5; /* 32-bit Area0 bus width */
value |= MODE_PIN6; /* 32-bit Area0 bus width */
value |= MODE_PIN7; /* Area 0 SRAM interface [fixed] */
value |= MODE_PIN8; /* Little Endian */
value |= MODE_PIN9; /* Master Mode */
value |= MODE_PIN14; /* No PLL step-up */
return value;
}
/*
* The Machine Vector
*/
static struct sh_machine_vector mv_sh7785lcr __initmv = {
.mv_name = "SH7785LCR",
.mv_setup = sh7785lcr_setup,
.mv_clk_init = sh7785lcr_clk_init,
.mv_init_irq = init_sh7785lcr_IRQ,
.mv_mode_pins = sh7785lcr_mode_pins,
};
arch/sh/boards/mach-cayman/Makefile
浏览文件 @ d3d07d94
#
# Makefile for the Hitachi Cayman specific parts of the kernel
#
obj-y := setup.o irq.o
obj-y := setup.o irq.o panic.o
arch/sh/boards/mach-cayman/irq.c
浏览文件 @ d3d07d94
......@@ -142,26 +142,11 @@ int cayman_irq_demux(int evt)
return irq;
}
#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
int cayman_irq_describe(char* p, int irq)
{
if (irq < NR_INTC_IRQS) {
return intc_irq_describe(p, irq);
} else if (irq < NR_INTC_IRQS + 8) {
return sprintf(p, "(SMSC %d)", irq - NR_INTC_IRQS);
} else if ((irq >= NR_INTC_IRQS + 24) && (irq < NR_INTC_IRQS + 32)) {
return sprintf(p, "(PCI2 %d)", irq - (NR_INTC_IRQS + 24));
}
return 0;
}
#endif
void init_cayman_irq(void)
{
int i;
epld_virt = onchip_remap(EPLD_BASE, 1024, "EPLD");
epld_virt = (unsigned long)ioremap_nocache(EPLD_BASE, 1024);
if (!epld_virt) {
printk(KERN_ERR "Cayman IRQ: Unable to remap EPLD\n");
return;
......
arch/sh/boards/mach-cayman/panic.c 0 → 100644
浏览文件 @ d3d07d94
/*
* Copyright (C) 2003 Richard Curnow, SuperH UK Limited
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/kernel.h>
#include <linux/io.h>
#include <cpu/registers.h>
/* THIS IS A PHYSICAL ADDRESS */
#define HDSP2534_ADDR (0x04002100)
static void poor_mans_delay(void)
{
int i;
for (i = 0; i < 2500000; i++)
cpu_relax();
}
static void show_value(unsigned long x)
{
int i;
unsigned nibble;
for (i = 0; i < 8; i++) {
nibble = ((x >> (i * 4)) & 0xf);
__raw_writeb(nibble + ((nibble > 9) ? 55 : 48),
HDSP2534_ADDR + 0xe0 + ((7 - i) << 2));
}
}
void
panic_handler(unsigned long panicPC, unsigned long panicSSR,
unsigned long panicEXPEVT)
{
while (1) {
/* This piece of code displays the PC on the LED display */
show_value(panicPC);
poor_mans_delay();
show_value(panicSSR);
poor_mans_delay();
show_value(panicEXPEVT);
poor_mans_delay();
}
}
arch/sh/boards/mach-cayman/setup.c
浏览文件 @ d3d07d94
......@@ -102,7 +102,7 @@ static int __init smsc_superio_setup(void)
{
unsigned char devid, devrev;
smsc_superio_virt = onchip_remap(SMSC_SUPERIO_BASE, 1024, "SMSC SuperIO");
smsc_superio_virt = (unsigned long)ioremap_nocache(SMSC_SUPERIO_BASE, 1024);
if (!smsc_superio_virt) {
panic("Unable to remap SMSC SuperIO\n");
}
......
arch/sh/boards/mach-dreamcast/setup.c
浏览文件 @ d3d07d94
......@@ -30,7 +30,6 @@
extern struct irq_chip systemasic_int;
extern void aica_time_init(void);
extern int gapspci_init(void);
extern int systemasic_irq_demux(int);
static void __init dreamcast_setup(char **cmdline_p)
......@@ -51,11 +50,6 @@ static void __init dreamcast_setup(char **cmdline_p)
handle_level_irq);
board_time_init = aica_time_init;
#ifdef CONFIG_PCI
if (gapspci_init() < 0)
printk(KERN_WARNING "GAPSPCI was not detected.\n");
#endif
}
static struct sh_machine_vector mv_dreamcast __initmv = {
......
arch/sh/boards/mach-migor/setup.c
浏览文件 @ d3d07d94
......@@ -584,3 +584,22 @@ static int __init migor_devices_setup(void)
return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
}
__initcall(migor_devices_setup);
/* Return the board specific boot mode pin configuration */
static int migor_mode_pins(void)
{
/* MD0=1, MD1=1, MD2=0: Clock Mode 3
* MD3=0: 16-bit Area0 Bus Width
* MD5=1: Little Endian
* TSTMD=1, MD8=0: Test Mode Disabled
*/
return MODE_PIN0 | MODE_PIN1 | MODE_PIN5;
}
/*
* The Machine Vector
*/
static struct sh_machine_vector mv_migor __initmv = {
.mv_name = "Migo-R",
.mv_mode_pins = migor_mode_pins,
};
arch/sh/boards/mach-r2d/setup.c
浏览文件 @ d3d07d94
......@@ -10,6 +10,9 @@
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/ata_platform.h>
#include <linux/sm501.h>
#include <linux/sm501-regs.h>
......@@ -181,6 +184,50 @@ static struct platform_device sm501_device = {
.resource = sm501_resources,
};
static struct mtd_partition r2d_partitions[] = {
{
.name = "U-Boot",
.offset = 0x00000000,
.size = 0x00040000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "Environment",
.offset = MTDPART_OFS_NXTBLK,
.size = 0x00040000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "Kernel",
.offset = MTDPART_OFS_NXTBLK,
.size = 0x001c0000,
}, {
.name = "Flash_FS",
.offset = MTDPART_OFS_NXTBLK,
.size = MTDPART_SIZ_FULL,
}
};
static struct physmap_flash_data flash_data = {
.width = 2,
.nr_parts = ARRAY_SIZE(r2d_partitions),
.parts = r2d_partitions,
};
static struct resource flash_resource = {
.start = 0x00000000,
.end = 0x02000000,
.flags = IORESOURCE_MEM,
};
static struct platform_device flash_device = {
.name = "physmap-flash",
.id = -1,
.resource = &flash_resource,
.num_resources = 1,
.dev = {
.platform_data = &flash_data,
},
};
static struct platform_device *rts7751r2d_devices[] __initdata = {
&sm501_device,
&heartbeat_device,
......@@ -203,6 +250,9 @@ static int __init rts7751r2d_devices_setup(void)
if (register_trapped_io(&cf_trapped_io) == 0)
platform_device_register(&cf_ide_device);
if (mach_is_r2d_plus())
platform_device_register(&flash_device);
spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
return platform_add_devices(rts7751r2d_devices,
......
arch/sh/boards/mach-se/7724/Makefile 0 → 100644
浏览文件 @ d3d07d94
#
# Makefile for the HITACHI UL SolutionEngine 7724 specific parts of the kernel
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
#
obj-y := setup.o irq.o
\ No newline at end of file
arch/sh/boards/mach-se/7724/irq.c 0 → 100644
浏览文件 @ d3d07d94
/*
* linux/arch/sh/boards/se/7724/irq.c
*
* Copyright (C) 2009 Renesas Solutions Corp.
*
* Kuninori Morimoto <morimoto.kuninori@renesas.com>
*
* Based on linux/arch/sh/boards/se/7722/irq.c
* Copyright (C) 2007 Nobuhiro Iwamatsu
*
* Hitachi UL SolutionEngine 7724 Support.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <mach-se/mach/se7724.h>
struct fpga_irq {
unsigned long sraddr;
unsigned long mraddr;
unsigned short mask;
unsigned int base;
};
static unsigned int fpga2irq(unsigned int irq)
{
if (irq >= IRQ0_BASE &&
irq <= IRQ0_END)
return IRQ0_IRQ;
else if (irq >= IRQ1_BASE &&
irq <= IRQ1_END)
return IRQ1_IRQ;
else
return IRQ2_IRQ;
}
static struct fpga_irq get_fpga_irq(unsigned int irq)
{
struct fpga_irq set;
switch (irq) {
case IRQ0_IRQ:
set.sraddr = IRQ0_SR;
set.mraddr = IRQ0_MR;
set.mask = IRQ0_MASK;
set.base = IRQ0_BASE;
break;
case IRQ1_IRQ:
set.sraddr = IRQ1_SR;
set.mraddr = IRQ1_MR;
set.mask = IRQ1_MASK;
set.base = IRQ1_BASE;
break;
default:
set.sraddr = IRQ2_SR;
set.mraddr = IRQ2_MR;
set.mask = IRQ2_MASK;
set.base = IRQ2_BASE;
break;
}
return set;
}
static void disable_se7724_irq(unsigned int irq)
{
struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
unsigned int bit = irq - set.base;
ctrl_outw(ctrl_inw(set.mraddr) | 0x0001 << bit, set.mraddr);
}
static void enable_se7724_irq(unsigned int irq)
{
struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
unsigned int bit = irq - set.base;
ctrl_outw(ctrl_inw(set.mraddr) & ~(0x0001 << bit), set.mraddr);
}
static struct irq_chip se7724_irq_chip __read_mostly = {
.name = "SE7724-FPGA",
.mask = disable_se7724_irq,
.unmask = enable_se7724_irq,
.mask_ack = disable_se7724_irq,
};
static void se7724_irq_demux(unsigned int irq, struct irq_desc *desc)
{
struct fpga_irq set = get_fpga_irq(irq);
unsigned short intv = ctrl_inw(set.sraddr);
struct irq_desc *ext_desc;
unsigned int ext_irq = set.base;
intv &= set.mask;
while (intv) {
if (intv & 0x0001) {
ext_desc = irq_desc + ext_irq;
handle_level_irq(ext_irq, ext_desc);
}
intv >>= 1;
ext_irq++;
}
}
/*
* Initialize IRQ setting
*/
void __init init_se7724_IRQ(void)
{
int i;
ctrl_outw(0xffff, IRQ0_MR); /* mask all */
ctrl_outw(0xffff, IRQ1_MR); /* mask all */
ctrl_outw(0xffff, IRQ2_MR); /* mask all */
ctrl_outw(0x0000, IRQ0_SR); /* clear irq */
ctrl_outw(0x0000, IRQ1_SR); /* clear irq */
ctrl_outw(0x0000, IRQ2_SR); /* clear irq */
ctrl_outw(0x002a, IRQ_MODE); /* set irq type */
for (i = 0; i < SE7724_FPGA_IRQ_NR; i++)
set_irq_chip_and_handler_name(SE7724_FPGA_IRQ_BASE + i,
&se7724_irq_chip,
handle_level_irq, "level");
set_irq_chained_handler(IRQ0_IRQ, se7724_irq_demux);
set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
set_irq_chained_handler(IRQ1_IRQ, se7724_irq_demux);
set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
set_irq_chained_handler(IRQ2_IRQ, se7724_irq_demux);
set_irq_type(IRQ2_IRQ, IRQ_TYPE_LEVEL_LOW);
}
arch/sh/boards/mach-se/7724/setup.c 0 → 100644
浏览文件 @ d3d07d94
/*
* linux/arch/sh/boards/se/7724/setup.c
*
* Copyright (C) 2009 Renesas Solutions Corp.
*
* Kuninori Morimoto <morimoto.kuninori@renesas.com>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/init.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/delay.h>
#include <linux/smc91x.h>
#include <linux/gpio.h>
#include <linux/input.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
#include <asm/sh_keysc.h>
#include <cpu/sh7724.h>
#include <mach-se/mach/se7724.h>
/*
* SWx 1234 5678
* ------------------------------------
* SW31 : 1001 1100 : default
* SW32 : 0111 1111 : use on board flash
*
* SW41 : abxx xxxx -> a = 0 : Analog monitor
* 1 : Digital monitor
* b = 0 : VGA
* 1 : SVGA
*/
/* Heartbeat */
static struct heartbeat_data heartbeat_data = {
.regsize = 16,
};
static struct resource heartbeat_resources[] = {
[0] = {
.start = PA_LED,
.end = PA_LED,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
.dev = {
.platform_data = &heartbeat_data,
},
.num_resources = ARRAY_SIZE(heartbeat_resources),
.resource = heartbeat_resources,
};
/* LAN91C111 */
static struct smc91x_platdata smc91x_info = {
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
};
static struct resource smc91x_eth_resources[] = {
[0] = {
.name = "SMC91C111" ,
.start = 0x1a300300,
.end = 0x1a30030f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ0_SMC,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
},
};
static struct platform_device smc91x_eth_device = {
.name = "smc91x",
.num_resources = ARRAY_SIZE(smc91x_eth_resources),
.resource = smc91x_eth_resources,
.dev = {
.platform_data = &smc91x_info,
},
};
/* MTD */
static struct mtd_partition nor_flash_partitions[] = {
{
.name = "uboot",
.offset = 0,
.size = (1 * 1024 * 1024),
.mask_flags = MTD_WRITEABLE, /* Read-only */
}, {
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = (2 * 1024 * 1024),
}, {
.name = "free-area",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
};
static struct physmap_flash_data nor_flash_data = {
.width = 2,
.parts = nor_flash_partitions,
.nr_parts = ARRAY_SIZE(nor_flash_partitions),
};
static struct resource nor_flash_resources[] = {
[0] = {
.name = "NOR Flash",
.start = 0x00000000,
.end = 0x01ffffff,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device nor_flash_device = {
.name = "physmap-flash",
.resource = nor_flash_resources,
.num_resources = ARRAY_SIZE(nor_flash_resources),
.dev = {
.platform_data = &nor_flash_data,
},
};
/* LCDC */
static struct sh_mobile_lcdc_info lcdc_info = {
.clock_source = LCDC_CLK_EXTERNAL,
.ch[0] = {
.chan = LCDC_CHAN_MAINLCD,
.bpp = 16,
.clock_divider = 1,
.lcd_cfg = {
.name = "LB070WV1",
.sync = 0, /* hsync and vsync are active low */
},
.lcd_size_cfg = { /* 7.0 inch */
.width = 152,
.height = 91,
},
.board_cfg = {
},
}
};
static struct resource lcdc_resources[] = {
[0] = {
.name = "LCDC",
.start = 0xfe940000,
.end = 0xfe941fff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 106,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device lcdc_device = {
.name = "sh_mobile_lcdc_fb",
.num_resources = ARRAY_SIZE(lcdc_resources),
.resource = lcdc_resources,
.dev = {
.platform_data = &lcdc_info,
},
};
/* CEU0 */
static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
.flags = SH_CEU_FLAG_USE_8BIT_BUS,
};
static struct resource ceu0_resources[] = {
[0] = {
.name = "CEU0",
.start = 0xfe910000,
.end = 0xfe91009f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 52,
.flags = IORESOURCE_IRQ,
},
[2] = {
/* place holder for contiguous memory */
},
};
static struct platform_device ceu0_device = {
.name = "sh_mobile_ceu",
.id = 0, /* "ceu0" clock */
.num_resources = ARRAY_SIZE(ceu0_resources),
.resource = ceu0_resources,
.dev = {
.platform_data = &sh_mobile_ceu0_info,
},
};
/* CEU1 */
static struct sh_mobile_ceu_info sh_mobile_ceu1_info = {
.flags = SH_CEU_FLAG_USE_8BIT_BUS,
};
static struct resource ceu1_resources[] = {
[0] = {
.name = "CEU1",
.start = 0xfe914000,
.end = 0xfe91409f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 63,
.flags = IORESOURCE_IRQ,
},
[2] = {
/* place holder for contiguous memory */
},
};
static struct platform_device ceu1_device = {
.name = "sh_mobile_ceu",
.id = 1, /* "ceu1" clock */
.num_resources = ARRAY_SIZE(ceu1_resources),
.resource = ceu1_resources,
.dev = {
.platform_data = &sh_mobile_ceu1_info,
},
};
/* KEYSC */
static struct sh_keysc_info keysc_info = {
.mode = SH_KEYSC_MODE_1,
.scan_timing = 10,
.delay = 50,
.keycodes = {
KEY_1, KEY_2, KEY_3, KEY_4, KEY_5,
KEY_6, KEY_7, KEY_8, KEY_9, KEY_A,
KEY_B, KEY_C, KEY_D, KEY_E, KEY_F,
KEY_G, KEY_H, KEY_I, KEY_K, KEY_L,
KEY_M, KEY_N, KEY_O, KEY_P, KEY_Q,
KEY_R, KEY_S, KEY_T, KEY_U, KEY_V,
},
};
static struct resource keysc_resources[] = {
[0] = {
.start = 0x1a204000,
.end = 0x1a20400f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ0_KEY,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device keysc_device = {
.name = "sh_keysc",
.id = 0, /* "keysc0" clock */
.num_resources = ARRAY_SIZE(keysc_resources),
.resource = keysc_resources,
.dev = {
.platform_data = &keysc_info,
},
};
static struct platform_device *ms7724se_devices[] __initdata = {
&heartbeat_device,
&smc91x_eth_device,
&lcdc_device,
&nor_flash_device,
&ceu0_device,
&ceu1_device,
&keysc_device,
};
#define SW4140 0xBA201000
#define FPGA_OUT 0xBA200400
#define PORT_HIZA 0xA4050158
#define SW41_A 0x0100
#define SW41_B 0x0200
#define SW41_C 0x0400
#define SW41_D 0x0800
#define SW41_E 0x1000
#define SW41_F 0x2000
#define SW41_G 0x4000
#define SW41_H 0x8000
static int __init devices_setup(void)
{
u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
/* Reset Release */
ctrl_outw(ctrl_inw(FPGA_OUT) &
~((1 << 1) | /* LAN */
(1 << 6) | /* VIDEO DAC */
(1 << 12)), /* USB0 */
FPGA_OUT);
/* enable IRQ 0,1,2 */
gpio_request(GPIO_FN_INTC_IRQ0, NULL);
gpio_request(GPIO_FN_INTC_IRQ1, NULL);
gpio_request(GPIO_FN_INTC_IRQ2, NULL);
/* enable SCIFA3 */
gpio_request(GPIO_FN_SCIF3_I_SCK, NULL);
gpio_request(GPIO_FN_SCIF3_I_RXD, NULL);
gpio_request(GPIO_FN_SCIF3_I_TXD, NULL);
gpio_request(GPIO_FN_SCIF3_I_CTS, NULL);
gpio_request(GPIO_FN_SCIF3_I_RTS, NULL);
/* enable LCDC */
gpio_request(GPIO_FN_LCDD23, NULL);
gpio_request(GPIO_FN_LCDD22, NULL);
gpio_request(GPIO_FN_LCDD21, NULL);
gpio_request(GPIO_FN_LCDD20, NULL);
gpio_request(GPIO_FN_LCDD19, NULL);
gpio_request(GPIO_FN_LCDD18, NULL);
gpio_request(GPIO_FN_LCDD17, NULL);
gpio_request(GPIO_FN_LCDD16, NULL);
gpio_request(GPIO_FN_LCDD15, NULL);
gpio_request(GPIO_FN_LCDD14, NULL);
gpio_request(GPIO_FN_LCDD13, NULL);
gpio_request(GPIO_FN_LCDD12, NULL);
gpio_request(GPIO_FN_LCDD11, NULL);
gpio_request(GPIO_FN_LCDD10, NULL);
gpio_request(GPIO_FN_LCDD9, NULL);
gpio_request(GPIO_FN_LCDD8, NULL);
gpio_request(GPIO_FN_LCDD7, NULL);
gpio_request(GPIO_FN_LCDD6, NULL);
gpio_request(GPIO_FN_LCDD5, NULL);
gpio_request(GPIO_FN_LCDD4, NULL);
gpio_request(GPIO_FN_LCDD3, NULL);
gpio_request(GPIO_FN_LCDD2, NULL);
gpio_request(GPIO_FN_LCDD1, NULL);
gpio_request(GPIO_FN_LCDD0, NULL);
gpio_request(GPIO_FN_LCDDISP, NULL);
gpio_request(GPIO_FN_LCDHSYN, NULL);
gpio_request(GPIO_FN_LCDDCK, NULL);
gpio_request(GPIO_FN_LCDVSYN, NULL);
gpio_request(GPIO_FN_LCDDON, NULL);
gpio_request(GPIO_FN_LCDVEPWC, NULL);
gpio_request(GPIO_FN_LCDVCPWC, NULL);
gpio_request(GPIO_FN_LCDRD, NULL);
gpio_request(GPIO_FN_LCDLCLK, NULL);
ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA);
/* enable CEU0 */
gpio_request(GPIO_FN_VIO0_D15, NULL);
gpio_request(GPIO_FN_VIO0_D14, NULL);
gpio_request(GPIO_FN_VIO0_D13, NULL);
gpio_request(GPIO_FN_VIO0_D12, NULL);
gpio_request(GPIO_FN_VIO0_D11, NULL);
gpio_request(GPIO_FN_VIO0_D10, NULL);
gpio_request(GPIO_FN_VIO0_D9, NULL);
gpio_request(GPIO_FN_VIO0_D8, NULL);
gpio_request(GPIO_FN_VIO0_D7, NULL);
gpio_request(GPIO_FN_VIO0_D6, NULL);
gpio_request(GPIO_FN_VIO0_D5, NULL);
gpio_request(GPIO_FN_VIO0_D4, NULL);
gpio_request(GPIO_FN_VIO0_D3, NULL);
gpio_request(GPIO_FN_VIO0_D2, NULL);
gpio_request(GPIO_FN_VIO0_D1, NULL);
gpio_request(GPIO_FN_VIO0_D0, NULL);
gpio_request(GPIO_FN_VIO0_VD, NULL);
gpio_request(GPIO_FN_VIO0_CLK, NULL);
gpio_request(GPIO_FN_VIO0_FLD, NULL);
gpio_request(GPIO_FN_VIO0_HD, NULL);
platform_resource_setup_memory(&ceu0_device, "ceu", 4 << 20);
/* enable CEU1 */
gpio_request(GPIO_FN_VIO1_D7, NULL);
gpio_request(GPIO_FN_VIO1_D6, NULL);
gpio_request(GPIO_FN_VIO1_D5, NULL);
gpio_request(GPIO_FN_VIO1_D4, NULL);
gpio_request(GPIO_FN_VIO1_D3, NULL);
gpio_request(GPIO_FN_VIO1_D2, NULL);
gpio_request(GPIO_FN_VIO1_D1, NULL);
gpio_request(GPIO_FN_VIO1_D0, NULL);
gpio_request(GPIO_FN_VIO1_FLD, NULL);
gpio_request(GPIO_FN_VIO1_HD, NULL);
gpio_request(GPIO_FN_VIO1_VD, NULL);
gpio_request(GPIO_FN_VIO1_CLK, NULL);
platform_resource_setup_memory(&ceu1_device, "ceu", 4 << 20);
/* KEYSC */
gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
gpio_request(GPIO_FN_KEYIN4, NULL);
gpio_request(GPIO_FN_KEYIN3, NULL);
gpio_request(GPIO_FN_KEYIN2, NULL);
gpio_request(GPIO_FN_KEYIN1, NULL);
gpio_request(GPIO_FN_KEYIN0, NULL);
gpio_request(GPIO_FN_KEYOUT3, NULL);
gpio_request(GPIO_FN_KEYOUT2, NULL);
gpio_request(GPIO_FN_KEYOUT1, NULL);
gpio_request(GPIO_FN_KEYOUT0, NULL);
if (sw & SW41_B) {
/* SVGA */
lcdc_info.ch[0].lcd_cfg.xres = 800;
lcdc_info.ch[0].lcd_cfg.yres = 600;
lcdc_info.ch[0].lcd_cfg.left_margin = 142;
lcdc_info.ch[0].lcd_cfg.right_margin = 52;
lcdc_info.ch[0].lcd_cfg.hsync_len = 96;
lcdc_info.ch[0].lcd_cfg.upper_margin = 24;
lcdc_info.ch[0].lcd_cfg.lower_margin = 2;
lcdc_info.ch[0].lcd_cfg.vsync_len = 2;
} else {
/* VGA */
lcdc_info.ch[0].lcd_cfg.xres = 640;
lcdc_info.ch[0].lcd_cfg.yres = 480;
lcdc_info.ch[0].lcd_cfg.left_margin = 105;
lcdc_info.ch[0].lcd_cfg.right_margin = 50;
lcdc_info.ch[0].lcd_cfg.hsync_len = 96;
lcdc_info.ch[0].lcd_cfg.upper_margin = 33;
lcdc_info.ch[0].lcd_cfg.lower_margin = 10;
lcdc_info.ch[0].lcd_cfg.vsync_len = 2;
}
if (sw & SW41_A) {
/* Digital monitor */
lcdc_info.ch[0].interface_type = RGB18;
lcdc_info.ch[0].flags = 0;
} else {
/* Analog monitor */
lcdc_info.ch[0].interface_type = RGB24;
lcdc_info.ch[0].flags = LCDC_FLAGS_DWPOL;
}
return platform_add_devices(ms7724se_devices,
ARRAY_SIZE(ms7724se_devices));
}
device_initcall(devices_setup);
static struct sh_machine_vector mv_ms7724se __initmv = {
.mv_name = "ms7724se",
.mv_init_irq = init_se7724_IRQ,
.mv_nr_irqs = SE7724_FPGA_IRQ_BASE + SE7724_FPGA_IRQ_NR,
};
arch/sh/boards/mach-se/7751/Makefile
浏览文件 @ d3d07d94
......@@ -3,5 +3,3 @@
#
obj-y := setup.o io.o irq.o
obj-$(CONFIG_PCI) += pci.o
arch/sh/boards/mach-se/7751/io.c
浏览文件 @ d3d07d94
......@@ -34,8 +34,6 @@ unsigned char sh7751se_inb(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned char *)port;
else if (is_pci_ioaddr(port))
return *(volatile unsigned char *)pci_ioaddr(port);
else
return (*port2adr(port)) & 0xff;
}
......@@ -46,8 +44,6 @@ unsigned char sh7751se_inb_p(unsigned long port)
if (PXSEG(port))
v = *(volatile unsigned char *)port;
else if (is_pci_ioaddr(port))
v = *(volatile unsigned char *)pci_ioaddr(port);
else
v = (*port2adr(port)) & 0xff;
ctrl_delay();
......@@ -58,8 +54,6 @@ unsigned short sh7751se_inw(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned short *)port;
else if (is_pci_ioaddr(port))
return *(volatile unsigned short *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else
......@@ -71,8 +65,6 @@ unsigned int sh7751se_inl(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned long *)port;
else if (is_pci_ioaddr(port))
return *(volatile unsigned int *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else
......@@ -85,8 +77,6 @@ void sh7751se_outb(unsigned char value, unsigned long port)
if (PXSEG(port))
*(volatile unsigned char *)port = value;
else if (is_pci_ioaddr(port))
*((unsigned char*)pci_ioaddr(port)) = value;
else
*(port2adr(port)) = value;
}
......@@ -95,8 +85,6 @@ void sh7751se_outb_p(unsigned char value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned char *)port = value;
else if (is_pci_ioaddr(port))
*((unsigned char*)pci_ioaddr(port)) = value;
else
*(port2adr(port)) = value;
ctrl_delay();
......@@ -106,8 +94,6 @@ void sh7751se_outw(unsigned short value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned short *)port = value;
else if (is_pci_ioaddr(port))
*((unsigned short *)pci_ioaddr(port)) = value;
else if (port >= 0x2000)
*port2adr(port) = value;
else
......@@ -118,8 +104,6 @@ void sh7751se_outl(unsigned int value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned long *)port = value;
else if (is_pci_ioaddr(port))
*((unsigned long*)pci_ioaddr(port)) = value;
else
maybebadio(port);
}
......
arch/sh/boards/mach-se/7751/pci.c 已删除 100644 → 0
浏览文件 @ 6cd8e300
/*
* linux/arch/sh/boards/se/7751/pci.c
*
* Author: Ian DaSilva (idasilva@mvista.com)
*
* Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
* PCI initialization for the Hitachi SH7751 Solution Engine board (MS7751SE01)
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <asm/io.h>
#include "../../../drivers/pci/pci-sh7751.h"
#define PCIMCR_MRSET_OFF 0xBFFFFFFF
#define PCIMCR_RFSH_OFF 0xFFFFFFFB
/*
* Only long word accesses of the PCIC's internal local registers and the
* configuration registers from the CPU is supported.
*/
#define PCIC_WRITE(x,v) writel((v), PCI_REG(x))
#define PCIC_READ(x) readl(PCI_REG(x))
/*
* Description: This function sets up and initializes the pcic, sets
* up the BARS, maps the DRAM into the address space etc, etc.
*/
int __init pcibios_init_platform(void)
{
unsigned long bcr1, wcr1, wcr2, wcr3, mcr;
unsigned short bcr2;
/*
* Initialize the slave bus controller on the pcic. The values used
* here should not be hardcoded, but they should be taken from the bsc
* on the processor, to make this function as generic as possible.
* (i.e. Another sbc may usr different SDRAM timing settings -- in order
* for the pcic to work, its settings need to be exactly the same.)
*/
bcr1 = (*(volatile unsigned long*)(SH7751_BCR1));
bcr2 = (*(volatile unsigned short*)(SH7751_BCR2));
wcr1 = (*(volatile unsigned long*)(SH7751_WCR1));
wcr2 = (*(volatile unsigned long*)(SH7751_WCR2));
wcr3 = (*(volatile unsigned long*)(SH7751_WCR3));
mcr = (*(volatile unsigned long*)(SH7751_MCR));
bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */
(*(volatile unsigned long*)(SH7751_BCR1)) = bcr1;
bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */
PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */
PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */
PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */
PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */
mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */
/* Enable all interrupts, so we know what to fix */
PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff);
PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f);
/* Set up standard PCI config registers */
PCIC_WRITE(SH7751_PCICONF1, 0xF39000C7); /* Bus Master, Mem & I/O access */
PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */
PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */
PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */
PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */
PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */
PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */
PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */
PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */
PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */
/* Now turn it on... */
PCIC_WRITE(SH7751_PCICR, 0xa5000001);
/*
* Set PCIMBR and PCIIOBR here, assuming a single window
* (16M MEM, 256K IO) is enough. If a larger space is
* needed, the readx/writex and inx/outx functions will
* have to do more (e.g. setting registers for each call).
*/
/*
* Set the MBR so PCI address is one-to-one with window,
* meaning all calls go straight through... use BUG_ON to
* catch erroneous assumption.
*/
BUG_ON(PCIBIOS_MIN_MEM != SH7751_PCI_MEMORY_BASE);
PCIC_WRITE(SH7751_PCIMBR, PCIBIOS_MIN_MEM);
/* Set IOBR for window containing area specified in pci.h */
PCIC_WRITE(SH7751_PCIIOBR, (PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK));
/* All done, may as well say so... */
printk("SH7751 PCI: Finished initialization of the PCI controller\n");
return 1;
}
int __init pcibios_map_platform_irq(u8 slot, u8 pin)
{
switch (slot) {
case 0: return 13;
case 1: return 13; /* AMD Ethernet controller */
case 2: return -1;
case 3: return -1;
case 4: return -1;
default:
printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
return -1;
}
}
static struct resource sh7751_io_resource = {
.name = "SH7751 IO",
.start = SH7751_PCI_IO_BASE,
.end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
.flags = IORESOURCE_IO
};
static struct resource sh7751_mem_resource = {
.name = "SH7751 mem",
.start = SH7751_PCI_MEMORY_BASE,
.end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
.flags = IORESOURCE_MEM
};
extern struct pci_ops sh7751_pci_ops;
struct pci_channel board_pci_channels[] = {
{ &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
{ NULL, NULL, NULL, 0, 0 },
};
arch/sh/boards/mach-se/7780/irq.c
浏览文件 @ d3d07d94
......@@ -12,10 +12,13 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <mach-se/mach/se7780.h>
#define INTC_BASE 0xffd00000
#define INTC_ICR1 (INTC_BASE+0x1c)
/*
* Initialize IRQ setting
*/
......@@ -43,4 +46,24 @@ void __init init_se7780_IRQ(void)
ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */
/* ICR1: detect low level(for 2ndcut) */
ctrl_outl(0xAAAA0000, INTC_ICR1);
/*
* FPGA PCISEL register initialize
*
* CPU || SLOT1 | SLOT2 | S-ATA | USB
* -------------------------------------
* INTA || INTA | INTD | -- | INTB
* -------------------------------------
* INTB || INTB | INTA | -- | INTC
* -------------------------------------
* INTC || INTC | INTB | INTA | --
* -------------------------------------
* INTD || INTD | INTC | -- | INTA
* -------------------------------------
*/
ctrl_outw(0x0013, FPGA_PCI_INTSEL1);
ctrl_outw(0xE402, FPGA_PCI_INTSEL2);
}
arch/sh/boards/mach-se/Makefile
浏览文件 @ d3d07d94
......@@ -7,3 +7,4 @@ obj-$(CONFIG_SH_7751_SOLUTION_ENGINE) += 7751/
obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += 7780/
obj-$(CONFIG_SH_7343_SOLUTION_ENGINE) += 7343/
obj-$(CONFIG_SH_7721_SOLUTION_ENGINE) += 7721/
obj-$(CONFIG_SH_7724_SOLUTION_ENGINE) += 7724/
arch/sh/boards/mach-sh03/rtc.c
浏览文件 @ d3d07d94
......@@ -35,13 +35,13 @@
#define RTC_BUSY 1
#define RTC_STOP 2
extern spinlock_t rtc_lock;
static DEFINE_SPINLOCK(sh03_rtc_lock);
unsigned long get_cmos_time(void)
{
unsigned int year, mon, day, hour, min, sec;
spin_lock(&rtc_lock);
spin_lock(&sh03_rtc_lock);
again:
do {
sec = (ctrl_inb(RTC_SEC1) & 0xf) + (ctrl_inb(RTC_SEC10) & 0x7) * 10;
......@@ -73,7 +73,7 @@ unsigned long get_cmos_time(void)
goto again;
}
spin_unlock(&rtc_lock);
spin_unlock(&sh03_rtc_lock);
return mktime(year, mon, day, hour, min, sec);
}
......@@ -91,7 +91,7 @@ static int set_rtc_mmss(unsigned long nowtime)
int i;
/* gets recalled with irq locally disabled */
spin_lock(&rtc_lock);
spin_lock(&sh03_rtc_lock);
for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */
if (!(ctrl_inb(RTC_CTL) & RTC_BUSY))
break;
......@@ -113,7 +113,7 @@ static int set_rtc_mmss(unsigned long nowtime)
cmos_minutes, real_minutes);
retval = -1;
}
spin_unlock(&rtc_lock);
spin_unlock(&sh03_rtc_lock);
return retval;
}
......
arch/sh/boards/mach-snapgear/io.c
浏览文件 @ d3d07d94
......@@ -36,8 +36,6 @@ unsigned char snapgear_inb(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned char *)port;
else if (is_pci_ioaddr(port))
return *(volatile unsigned char *)pci_ioaddr(port);
else
return (*port2adr(port)) & 0xff;
}
......@@ -48,8 +46,6 @@ unsigned char snapgear_inb_p(unsigned long port)
if (PXSEG(port))
v = *(volatile unsigned char *)port;
else if (is_pci_ioaddr(port))
v = *(volatile unsigned char *)pci_ioaddr(port);
else
v = (*port2adr(port))&0xff;
ctrl_delay();
......@@ -60,8 +56,6 @@ unsigned short snapgear_inw(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned short *)port;
else if (is_pci_ioaddr(port))
return *(volatile unsigned short *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else
......@@ -73,8 +67,6 @@ unsigned int snapgear_inl(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned long *)port;
else if (is_pci_ioaddr(port))
return *(volatile unsigned int *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else
......@@ -87,8 +79,6 @@ void snapgear_outb(unsigned char value, unsigned long port)
if (PXSEG(port))
*(volatile unsigned char *)port = value;
else if (is_pci_ioaddr(port))
*((unsigned char*)pci_ioaddr(port)) = value;
else
*(port2adr(port)) = value;
}
......@@ -97,8 +87,6 @@ void snapgear_outb_p(unsigned char value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned char *)port = value;
else if (is_pci_ioaddr(port))
*((unsigned char*)pci_ioaddr(port)) = value;
else
*(port2adr(port)) = value;
ctrl_delay();
......@@ -108,8 +96,6 @@ void snapgear_outw(unsigned short value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned short *)port = value;
else if (is_pci_ioaddr(port))
*((unsigned short *)pci_ioaddr(port)) = value;
else if (port >= 0x2000)
*port2adr(port) = value;
else
......@@ -120,8 +106,6 @@ void snapgear_outl(unsigned int value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned long *)port = value;
else if (is_pci_ioaddr(port))
*((unsigned long*)pci_ioaddr(port)) = value;
else
maybebadio(port);
}
......
arch/sh/boards/mach-systemh/io.c
浏览文件 @ d3d07d94
......@@ -35,8 +35,6 @@ unsigned char sh7751systemh_inb(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned char *)port;
else if (is_pci_ioaddr(port))
return *(volatile unsigned char *)pci_ioaddr(port);
else if (port <= 0x3F1)
return *(volatile unsigned char *)ETHER_IOMAP(port);
else
......@@ -49,8 +47,6 @@ unsigned char sh7751systemh_inb_p(unsigned long port)
if (PXSEG(port))
v = *(volatile unsigned char *)port;
else if (is_pci_ioaddr(port))
v = *(volatile unsigned char *)pci_ioaddr(port);
else if (port <= 0x3F1)
v = *(volatile unsigned char *)ETHER_IOMAP(port);
else
......@@ -63,8 +59,6 @@ unsigned short sh7751systemh_inw(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned short *)port;
else if (is_pci_ioaddr(port))
return *(volatile unsigned short *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else if (port <= 0x3F1)
......@@ -78,8 +72,6 @@ unsigned int sh7751systemh_inl(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned long *)port;
else if (is_pci_ioaddr(port))
return *(volatile unsigned int *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else if (port <= 0x3F1)
......@@ -94,8 +86,6 @@ void sh7751systemh_outb(unsigned char value, unsigned long port)
if (PXSEG(port))
*(volatile unsigned char *)port = value;
else if (is_pci_ioaddr(port))
*((unsigned char*)pci_ioaddr(port)) = value;
else if (port <= 0x3F1)
*(volatile unsigned char *)ETHER_IOMAP(port) = value;
else
......@@ -106,8 +96,6 @@ void sh7751systemh_outb_p(unsigned char value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned char *)port = value;
else if (is_pci_ioaddr(port))
*((unsigned char*)pci_ioaddr(port)) = value;
else if (port <= 0x3F1)
*(volatile unsigned char *)ETHER_IOMAP(port) = value;
else
......@@ -119,8 +107,6 @@ void sh7751systemh_outw(unsigned short value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned short *)port = value;
else if (is_pci_ioaddr(port))
*((unsigned short *)pci_ioaddr(port)) = value;
else if (port >= 0x2000)
*port2adr(port) = value;
else if (port <= 0x3F1)
......@@ -133,8 +119,6 @@ void sh7751systemh_outl(unsigned int value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned long *)port = value;
else if (is_pci_ioaddr(port))
*((unsigned long*)pci_ioaddr(port)) = value;
else
maybebadio(port);
}
......
arch/sh/boards/mach-titan/io.c
浏览文件 @ d3d07d94
......@@ -17,8 +17,6 @@ u8 titan_inb(unsigned long port)
{
if (PXSEG(port))
return ctrl_inb(port);
else if (is_pci_ioaddr(port))
return ctrl_inb(pci_ioaddr(port));
return ctrl_inw(port2adr(port)) & 0xff;
}
......@@ -28,8 +26,6 @@ u8 titan_inb_p(unsigned long port)
if (PXSEG(port))
v = ctrl_inb(port);
else if (is_pci_ioaddr(port))
v = ctrl_inb(pci_ioaddr(port));
else
v = ctrl_inw(port2adr(port)) & 0xff;
ctrl_delay();
......@@ -40,8 +36,6 @@ u16 titan_inw(unsigned long port)
{
if (PXSEG(port))
return ctrl_inw(port);
else if (is_pci_ioaddr(port))
return ctrl_inw(pci_ioaddr(port));
else if (port >= 0x2000)
return ctrl_inw(port2adr(port));
else
......@@ -53,8 +47,6 @@ u32 titan_inl(unsigned long port)
{
if (PXSEG(port))
return ctrl_inl(port);
else if (is_pci_ioaddr(port))
return ctrl_inl(pci_ioaddr(port));
else if (port >= 0x2000)
return ctrl_inw(port2adr(port));
else
......@@ -66,8 +58,6 @@ void titan_outb(u8 value, unsigned long port)
{
if (PXSEG(port))
ctrl_outb(value, port);
else if (is_pci_ioaddr(port))
ctrl_outb(value, pci_ioaddr(port));
else
ctrl_outw(value, port2adr(port));
}
......@@ -76,8 +66,6 @@ void titan_outb_p(u8 value, unsigned long port)
{
if (PXSEG(port))
ctrl_outb(value, port);
else if (is_pci_ioaddr(port))
ctrl_outb(value, pci_ioaddr(port));
else
ctrl_outw(value, port2adr(port));
ctrl_delay();
......@@ -87,8 +75,6 @@ void titan_outw(u16 value, unsigned long port)
{
if (PXSEG(port))
ctrl_outw(value, port);
else if (is_pci_ioaddr(port))
ctrl_outw(value, pci_ioaddr(port));
else if (port >= 0x2000)
ctrl_outw(value, port2adr(port));
else
......@@ -99,8 +85,6 @@ void titan_outl(u32 value, unsigned long port)
{
if (PXSEG(port))
ctrl_outl(value, port);
else if (is_pci_ioaddr(port))
ctrl_outl(value, pci_ioaddr(port));
else
maybebadio(port);
}
......@@ -117,10 +101,8 @@ void titan_outsl(unsigned long port, const void *src, unsigned long count)
void __iomem *titan_ioport_map(unsigned long port, unsigned int size)
{
if (PXSEG(port) || is_pci_memaddr(port))
if (PXSEG(port))
return (void __iomem *)port;
else if (is_pci_ioaddr(port))
return (void __iomem *)pci_ioaddr(port);
return (void __iomem *)port2adr(port);
}
arch/sh/boot/Makefile
浏览文件 @ d3d07d94
......@@ -20,9 +20,6 @@ CONFIG_BOOT_LINK_OFFSET ?= 0x00800000
CONFIG_ZERO_PAGE_OFFSET ?= 0x00001000
CONFIG_ENTRY_OFFSET ?= 0x00001000
export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET
targets := zImage vmlinux.srec uImage uImage.srec
subdir- := compressed
......@@ -43,6 +40,9 @@ KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
$$[$(CONFIG_MEMORY_START)]')
endif
export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET KERNEL_MEMORY
KERNEL_LOAD := $(shell /bin/bash -c 'printf "0x%08x" \
$$[$(CONFIG_PAGE_OFFSET) + \
$(KERNEL_MEMORY) + \
......
arch/sh/boot/compressed/Makefile
浏览文件 @ d3d07d94
ifeq ($(CONFIG_SUPERH32),y)
include ${srctree}/arch/sh/boot/compressed/Makefile_32
else
include ${srctree}/arch/sh/boot/compressed/Makefile_64
#
# linux/arch/sh/boot/compressed/Makefile
#
# create a compressed vmlinux image from the original vmlinux
#
targets := vmlinux vmlinux.bin vmlinux.bin.gz \
head_$(BITS).o misc_$(BITS).o piggy.o
OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc_$(BITS).o $(obj)/cache.o
ifdef CONFIG_SH_STANDARD_BIOS
OBJECTS += $(obj)/../../kernel/sh_bios.o
endif
#
# IMAGE_OFFSET is the load offset of the compression loader
#
IMAGE_OFFSET := $(shell /bin/bash -c 'printf "0x%08x" \
$$[$(CONFIG_PAGE_OFFSET) + \
$(KERNEL_MEMORY) + \
$(CONFIG_BOOT_LINK_OFFSET)]')
LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
ifeq ($(CONFIG_FUNCTION_TRACER),y)
ORIG_CFLAGS := $(KBUILD_CFLAGS)
KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
endif
LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(IMAGE_OFFSET) -e startup \
-T $(obj)/../../kernel/vmlinux.lds
$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE
$(call if_changed,ld)
@:
$(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
$(call if_changed,gzip)
OBJCOPYFLAGS += -R .empty_zero_page
$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE
$(call if_changed,as_o_S)
arch/sh/boot/compressed/Makefile_32 已删除 100644 → 0
浏览文件 @ 6cd8e300
#
# linux/arch/sh/boot/compressed/Makefile
#
# create a compressed vmlinux image from the original vmlinux
#
targets := vmlinux vmlinux.bin vmlinux.bin.gz \
head_32.o misc_32.o piggy.o
OBJECTS = $(obj)/head_32.o $(obj)/misc_32.o
ifdef CONFIG_SH_STANDARD_BIOS
OBJECTS += $(obj)/../../kernel/sh_bios.o
endif
#
# IMAGE_OFFSET is the load offset of the compression loader
#
IMAGE_OFFSET := $(shell /bin/bash -c 'printf "0x%08x" \
$$[$(CONFIG_PAGE_OFFSET) + \
$(CONFIG_MEMORY_START) + \
$(CONFIG_BOOT_LINK_OFFSET)]')
LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
ifeq ($(CONFIG_FUNCTION_TRACER),y)
ORIG_CFLAGS := $(KBUILD_CFLAGS)
KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
endif
LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -e startup -T $(obj)/../../kernel/vmlinux.lds
$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE
$(call if_changed,ld)
@:
$(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
$(call if_changed,gzip)
OBJCOPYFLAGS += -R .empty_zero_page
$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE
$(call if_changed,as_o_S)
arch/sh/boot/compressed/Makefile_64 已删除 100644 → 0
浏览文件 @ 6cd8e300
#
# arch/sh/boot/compressed/Makefile_64
#
# create a compressed vmlinux image from the original vmlinux
#
# Copyright (C) 2002 Stuart Menefy
# Copyright (C) 2004 Paul Mundt
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
targets := vmlinux vmlinux.bin vmlinux.bin.gz \
head_64.o misc_64.o cache.o piggy.o
OBJECTS := $(obj)/vmlinux_64.lds $(obj)/head_64.o $(obj)/misc_64.o \
$(obj)/cache.o
#
# ZIMAGE_OFFSET is the load offset of the compression loader
# (4M for the kernel plus 64K for this loader)
#
ZIMAGE_OFFSET := $(shell /bin/bash -c 'printf "0x%08x" \
$$[$(CONFIG_PAGE_OFFSET)+0x400000+0x10000]')
LDFLAGS_vmlinux := -Ttext $(ZIMAGE_OFFSET) -e startup \
-T $(obj)/../../kernel/vmlinux.lds
$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE
$(call if_changed,ld)
@:
$(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
$(call if_changed,gzip)
OBJCOPYFLAGS += -R .empty_zero_page
$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE
$(call if_changed,as_o_S)
arch/sh/boot/compressed/head_64.S
浏览文件 @ d3d07d94
......@@ -14,6 +14,7 @@
* Copyright (C) 2002 Stuart Menefy (stuart.menefy@st.com)
*/
#include <asm/cache.h>
#include <asm/tlb.h>
#include <cpu/mmu_context.h>
#include <cpu/registers.h>
......@@ -33,11 +34,7 @@
#define ICCR0_INIT_VAL ICCR0_ON | ICCR0_ICI /* ICE + ICI */
#define ICCR1_INIT_VAL ICCR1_NOLOCK /* No locking */
#if 1
#define OCCR0_INIT_VAL OCCR0_ON | OCCR0_OCI | OCCR0_WB /* OCE + OCI + WB */
#else
#define OCCR0_INIT_VAL OCCR0_OFF
#endif
#define OCCR1_INIT_VAL OCCR1_NOLOCK /* No locking */
.text
......
arch/sh/boot/compressed/vmlinux_64.lds 已删除 100644 → 0
浏览文件 @ 6cd8e300
/*
* ld script to make compressed SuperH/shmedia Linux kernel+decompression
* bootstrap
* Modified by Stuart Menefy from arch/sh/vmlinux.lds.S written by Niibe Yutaka
*/
#ifdef CONFIG_LITTLE_ENDIAN
/* OUTPUT_FORMAT("elf32-sh64l-linux", "elf32-sh64l-linux", "elf32-sh64l-linux") */
#define NOP 0x6ff0fff0
#else
/* OUTPUT_FORMAT("elf32-sh64", "elf32-sh64", "elf32-sh64") */
#define NOP 0xf0fff06f
#endif
OUTPUT_FORMAT("elf32-sh64-linux")
OUTPUT_ARCH(sh)
ENTRY(_start)
#define ALIGNED_GAP(section, align) (((ADDR(section)+SIZEOF(section)+(align)-1) & ~((align)-1))-ADDR(section))
#define FOLLOWING(section, align) AT (LOADADDR(section) + ALIGNED_GAP(section,align))
SECTIONS
{
_text = .; /* Text and read-only data */
.text : {
*(.text)
*(.text64)
*(.text..SHmedia32)
*(.fixup)
*(.gnu.warning)
} = NOP
. = ALIGN(4);
.rodata : { *(.rodata) }
/* There is no 'real' reason for eight byte alignment, four would work
* as well, but gdb downloads much (*4) faster with this.
*/
. = ALIGN(8);
.image : { *(.image) }
. = ALIGN(4);
_etext = .; /* End of text section */
.data : /* Data */
FOLLOWING(.image, 4)
{
_data = .;
*(.data)
}
_data_image = LOADADDR(.data);/* Address of data section in ROM */
_edata = .; /* End of data section */
.stack : { stack = .; _stack = .; }
. = ALIGN(4);
__bss_start = .; /* BSS */
.bss : {
*(.bss)
}
. = ALIGN(4);
_end = . ;
}
arch/sh/cchips/Kconfig
浏览文件 @ d3d07d94
......@@ -34,11 +34,6 @@ config HD64461_IRQ
Do not change this unless you know what you are doing.
config HD64461_IOBASE
hex "HD64461 start address"
depends on HD64461
default "0xb0000000"
config HD64461_ENABLER
bool "HD64461 PCMCIA enabler"
depends on HD64461
......
arch/sh/cchips/hd6446x/hd64461.c
浏览文件 @ d3d07d94
......@@ -80,7 +80,7 @@ int __init setup_hd64461(void)
printk(KERN_INFO
"HD64461 configured at 0x%x on irq %d(mapped into %d to %d)\n",
CONFIG_HD64461_IOBASE, CONFIG_HD64461_IRQ, HD64461_IRQBASE,
HD64461_IOBASE, CONFIG_HD64461_IRQ, HD64461_IRQBASE,
HD64461_IRQBASE + 15);
/* Should be at processor specific part.. */
......
arch/sh/configs/ap325rxa_defconfig
浏览文件 @ d3d07d94
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29
# Thu Apr 2 17:46:53 2009
# Linux kernel version: 2.6.30-rc3
# Mon Apr 27 12:42:06 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
......@@ -74,6 +75,7 @@ CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
......@@ -92,12 +94,15 @@ CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
......@@ -110,7 +115,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
......@@ -159,6 +163,7 @@ CONFIG_ARCH_SHMOBILE=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
CONFIG_CPU_SUBTYPE_SH7723=y
# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
......@@ -168,8 +173,6 @@ CONFIG_CPU_SUBTYPE_SH7723=y
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
......@@ -573,6 +576,7 @@ CONFIG_SCSI_WAIT_SCAN=m
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
......@@ -695,6 +699,7 @@ CONFIG_DEVKMEM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=6
CONFIG_SERIAL_SH_SCI_CONSOLE=y
......@@ -1030,6 +1035,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
......@@ -1051,6 +1057,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
......@@ -1100,6 +1111,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
......@@ -1191,10 +1203,24 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
......@@ -1303,6 +1329,7 @@ CONFIG_CRYPTO_CBC=y
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
......
arch/sh/configs/cayman_defconfig
浏览文件 @ d3d07d94
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29
# Thu Apr 2 17:49:14 2009
# Linux kernel version: 2.6.30-rc3
# Mon Apr 27 13:42:53 2009
#
CONFIG_SUPERH=y
# CONFIG_SUPERH32 is not set
......@@ -40,6 +40,7 @@ CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
......@@ -70,6 +71,7 @@ CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
......@@ -89,10 +91,13 @@ CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
......@@ -105,7 +110,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
......@@ -127,39 +131,6 @@ CONFIG_DEFAULT_IOSCHED="cfq"
# System type
#
CONFIG_CPU_SH5=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
# CONFIG_CPU_SUBTYPE_SH7720 is not set
# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7750S is not set
# CONFIG_CPU_SUBTYPE_SH7751 is not set
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
# CONFIG_CPU_SUBTYPE_SH7786 is not set
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
CONFIG_CPU_SUBTYPE_SH5_101=y
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
......@@ -279,8 +250,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
#
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
......@@ -492,6 +461,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
......@@ -568,6 +538,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
......@@ -591,6 +562,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
......@@ -779,6 +751,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
......@@ -1042,7 +1015,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
......@@ -1082,6 +1054,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
......@@ -1104,6 +1077,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
......@@ -1146,8 +1124,13 @@ CONFIG_MINIX_FS=y
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
......@@ -1208,6 +1191,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
......@@ -1241,15 +1227,21 @@ CONFIG_FRAME_POINTER=y
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DEBUG_BOOTMEM is not set
......@@ -1354,6 +1346,7 @@ CONFIG_CRYPTO=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
......
arch/sh/configs/dreamcast_defconfig
浏览文件 @ d3d07d94
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29
# Thu Apr 2 17:51:48 2009
# Linux kernel version: 2.6.30-rc3
# Mon Apr 27 12:44:27 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
......@@ -71,6 +72,7 @@ CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
......@@ -90,6 +92,7 @@ CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
......@@ -98,6 +101,8 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
......@@ -110,7 +115,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
......@@ -156,6 +160,7 @@ CONFIG_CPU_SUBTYPE_SH7091=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
......@@ -165,8 +170,6 @@ CONFIG_CPU_SUBTYPE_SH7091=y
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
......@@ -271,7 +274,7 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_SH_DMA_API=y
CONFIG_SH_DMA=y
CONFIG_SH_DMA_IRQ_MULTI=y
CONFIG_NR_ONCHIP_DMA_CHANNELS=6
CONFIG_NR_ONCHIP_DMA_CHANNELS=4
CONFIG_NR_DMA_CHANNELS_BOOL=y
CONFIG_NR_DMA_CHANNELS=9
# CONFIG_PVR2_DMA is not set
......@@ -320,7 +323,6 @@ CONFIG_CMDLINE="console=ttySC1,115200 panic=3"
CONFIG_MAPLE=y
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
......@@ -602,6 +604,7 @@ CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_MAPLE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
......@@ -812,7 +815,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
......@@ -866,6 +868,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
......@@ -910,6 +917,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
......@@ -947,10 +955,24 @@ CONFIG_FRAME_WARN=1024
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
......@@ -1051,6 +1073,7 @@ CONFIG_CRYPTO=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
......
arch/sh/configs/edosk7705_defconfig
浏览文件 @ d3d07d94
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29
# Thu Apr 2 17:54:02 2009
# Linux kernel version: 2.6.30-rc3
# Mon Apr 27 12:45:04 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
......@@ -56,6 +57,7 @@ CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PRINTK is not set
# CONFIG_BUG is not set
......@@ -74,12 +76,15 @@ CONFIG_SHMEM=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
......@@ -114,6 +119,7 @@ CONFIG_CPU_SUBTYPE_SH7705=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
......@@ -123,8 +129,6 @@ CONFIG_CPU_SUBTYPE_SH7705=y
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
......@@ -381,6 +385,10 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
#
# Pseudo filesystems
#
......@@ -409,10 +417,22 @@ CONFIG_FRAME_WARN=1024
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
......@@ -426,6 +446,7 @@ CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
......
arch/sh/configs/edosk7760_defconfig
浏览文件 @ d3d07d94
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29
# Thu Apr 2 17:54:57 2009
# Linux kernel version: 2.6.30-rc3
# Mon Apr 27 12:45:25 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
......@@ -40,6 +41,7 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
......@@ -67,7 +69,6 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
CONFIG_INITRAMFS_COMPRESSION_NONE=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
......@@ -77,6 +78,7 @@ CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
......@@ -96,6 +98,7 @@ CONFIG_COMPAT_BRK=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
......@@ -103,6 +106,8 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
......@@ -115,7 +120,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
......@@ -161,6 +165,7 @@ CONFIG_CPU_SH4=y
CONFIG_CPU_SUBTYPE_SH7760=y
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
......@@ -170,8 +175,6 @@ CONFIG_CPU_SUBTYPE_SH7760=y
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
......@@ -815,6 +818,7 @@ CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
......@@ -838,6 +842,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
......@@ -883,6 +892,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
......@@ -964,6 +974,9 @@ CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
......@@ -1001,6 +1014,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
......@@ -1010,9 +1024,14 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
......@@ -1126,6 +1145,7 @@ CONFIG_CRYPTO_DES=y
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
......
arch/sh/configs/espt_defconfig
浏览文件 @ d3d07d94
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29
# Thu Apr 2 17:58:18 2009
# Linux kernel version: 2.6.30-rc3
# Mon Apr 27 12:46:26 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
......@@ -78,6 +79,7 @@ CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
......@@ -106,6 +108,8 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
......@@ -117,7 +121,6 @@ CONFIG_MODULES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
......@@ -164,6 +167,7 @@ CONFIG_CPU_SH4A=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
CONFIG_CPU_SUBTYPE_SH7763=y
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
......@@ -173,8 +177,6 @@ CONFIG_CPU_SUBTYPE_SH7763=y
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
......@@ -548,6 +550,7 @@ CONFIG_SCSI_WAIT_SCAN=m
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
......@@ -919,6 +922,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
......@@ -942,6 +946,11 @@ CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
......@@ -985,8 +994,13 @@ CONFIG_CRAMFS=y
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
......@@ -1075,11 +1089,25 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
......@@ -1179,6 +1207,7 @@ CONFIG_CRYPTO=y
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
CONFIG_BINARY_PRINTF=y
#
# Library routines
......
arch/sh/configs/hp6xx_defconfig
浏览文件 @ d3d07d94
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29
# Thu Apr 2 18:01:05 2009
# Linux kernel version: 2.6.30-rc3
# Mon Apr 27 12:47:15 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
......@@ -67,6 +68,7 @@ CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
......@@ -85,12 +87,15 @@ CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
......@@ -98,7 +103,6 @@ CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
......@@ -144,6 +148,7 @@ CONFIG_CPU_SUBTYPE_SH7709=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
......@@ -153,8 +158,6 @@ CONFIG_CPU_SUBTYPE_SH7709=y
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
......@@ -385,6 +388,7 @@ CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
......@@ -431,6 +435,7 @@ CONFIG_KEYBOARD_HP6XX=y
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
......@@ -673,6 +678,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
......@@ -719,6 +729,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
#
# Partition Types
......@@ -786,10 +797,23 @@ CONFIG_FRAME_WARN=1024
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
......@@ -898,6 +922,7 @@ CONFIG_CRYPTO_MD5=y
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
......
arch/sh/configs/landisk_defconfig
浏览文件 @ d3d07d94
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29
# Thu Apr 2 18:02:54 2009
# Linux kernel version: 2.6.30-rc3
# Mon Apr 27 12:47:48 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
......@@ -69,6 +70,7 @@ CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
......@@ -88,6 +90,7 @@ CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
......@@ -95,6 +98,8 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
......@@ -107,7 +112,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
......@@ -153,6 +157,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
......@@ -162,8 +167,6 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
......@@ -292,8 +295,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
#
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
......@@ -602,6 +603,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
......@@ -706,6 +708,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
......@@ -729,6 +732,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
......@@ -922,6 +926,7 @@ CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_USB_VIDEO_CLASS is not set
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
# CONFIG_USB_GSPCA is not set
# CONFIG_VIDEO_HDPVR is not set
CONFIG_VIDEO_USBVIDEO=m
......@@ -994,15 +999,17 @@ CONFIG_USB_HID=m
#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=m
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=m
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
......@@ -1197,6 +1204,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
......@@ -1221,6 +1229,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
......@@ -1270,10 +1283,15 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
......@@ -1364,10 +1382,23 @@ CONFIG_FRAME_WARN=1024
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_SH_STANDARD_BIOS=y
......@@ -1469,6 +1500,7 @@ CONFIG_CRYPTO=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
......
arch/sh/configs/lboxre2_defconfig
浏览文件 @ d3d07d94
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29
# Thu Apr 2 18:06:51 2009
# Linux kernel version: 2.6.30-rc3
# Mon Apr 27 12:48:54 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
......@@ -69,6 +70,7 @@ CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
......@@ -88,6 +90,7 @@ CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
......@@ -95,6 +98,8 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
......@@ -107,7 +112,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
......@@ -153,6 +157,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
......@@ -162,8 +167,6 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
......@@ -293,8 +296,6 @@ CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1"
#
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
......@@ -542,6 +543,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
......@@ -702,6 +704,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
......@@ -725,6 +728,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
......@@ -931,7 +935,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
......@@ -1007,6 +1010,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
......@@ -1028,6 +1032,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
......@@ -1073,8 +1082,13 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
......@@ -1151,10 +1165,23 @@ CONFIG_FRAME_WARN=1024
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_SH_STANDARD_BIOS=y
......@@ -1256,6 +1283,7 @@ CONFIG_CRYPTO=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
......
arch/sh/configs/magicpanelr2_defconfig
浏览文件 @ d3d07d94
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29
# Thu Apr 2 18:07:39 2009
# Linux kernel version: 2.6.30-rc3
# Mon Apr 27 12:49:32 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
......@@ -39,6 +40,7 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
......@@ -66,7 +68,6 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
CONFIG_INITRAMFS_COMPRESSION_NONE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
......@@ -76,6 +77,7 @@ CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
......@@ -94,6 +96,7 @@ CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
......@@ -101,6 +104,8 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
......@@ -113,7 +118,6 @@ CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
......@@ -159,6 +163,7 @@ CONFIG_CPU_SUBTYPE_SH7720=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
......@@ -168,8 +173,6 @@ CONFIG_CPU_SUBTYPE_SH7720=y
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
......@@ -813,6 +816,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
......@@ -830,6 +834,11 @@ CONFIG_FILE_LOCKING=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
......@@ -884,6 +893,7 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
......@@ -965,6 +975,7 @@ CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
......@@ -1000,6 +1011,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
......@@ -1008,9 +1020,14 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
......@@ -1035,6 +1052,7 @@ CONFIG_DUMP_CODE=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
......
arch/sh/configs/microdev_defconfig
浏览文件 @ d3d07d94
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29
# Thu Apr 2 18:11:13 2009
# Linux kernel version: 2.6.30-rc3
# Mon Apr 27 12:50:51 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
......@@ -65,7 +66,6 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
CONFIG_INITRAMFS_COMPRESSION_NONE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
......@@ -74,6 +74,7 @@ CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
......@@ -92,12 +93,15 @@ CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
......@@ -105,7 +109,6 @@ CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
......@@ -151,6 +154,7 @@ CONFIG_CPU_SH4=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
CONFIG_CPU_SUBTYPE_SH4_202=y
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
......@@ -160,8 +164,6 @@ CONFIG_CPU_SUBTYPE_SH4_202=y
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
......@@ -647,6 +649,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
......@@ -668,6 +671,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
......@@ -715,6 +723,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
......@@ -802,10 +811,24 @@ CONFIG_FRAME_WARN=1024
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
......@@ -914,6 +937,7 @@ CONFIG_CRYPTO_DES=y
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
......
arch/sh/configs/migor_defconfig
浏览文件 @ d3d07d94
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29
# Thu Apr 2 18:14:03 2009
# Linux kernel version: 2.6.30-rc3
# Mon Apr 27 12:51:34 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
......@@ -67,7 +68,6 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
CONFIG_INITRAMFS_COMPRESSION_NONE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
......@@ -76,6 +76,7 @@ CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
......@@ -104,6 +105,8 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
......@@ -115,7 +118,6 @@ CONFIG_MODULES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
......@@ -165,6 +167,7 @@ CONFIG_ARCH_SHMOBILE=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
......@@ -174,8 +177,6 @@ CONFIG_ARCH_SHMOBILE=y
# CONFIG_CPU_SUBTYPE_SH7343 is not set
CONFIG_CPU_SUBTYPE_SH7722=y
# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
......@@ -577,6 +578,7 @@ CONFIG_SCSI_WAIT_SCAN=m
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
......@@ -873,7 +875,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
......@@ -1011,6 +1012,11 @@ CONFIG_FILE_LOCKING=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
......@@ -1056,6 +1062,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
......@@ -1105,11 +1112,25 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
......@@ -1218,6 +1239,7 @@ CONFIG_CRYPTO_WORKQUEUE=y
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
......
arch/sh/configs/polaris_defconfig
浏览文件 @ d3d07d94
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29
# Thu Apr 2 18:16:48 2009
# Linux kernel version: 2.6.30-rc3
# Mon Apr 27 12:52:19 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
......@@ -40,6 +41,7 @@ CONFIG_LOCALVERSION=""
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
......@@ -76,6 +78,7 @@ CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
......@@ -94,6 +97,7 @@ CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
......@@ -101,6 +105,8 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
......@@ -113,7 +119,6 @@ CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
......@@ -159,6 +164,7 @@ CONFIG_CPU_SUBTYPE_SH7709=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
......@@ -168,8 +174,6 @@ CONFIG_CPU_SUBTYPE_SH7709=y
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
......@@ -777,6 +781,11 @@ CONFIG_FILE_LOCKING=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
......@@ -831,6 +840,7 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
......@@ -874,6 +884,9 @@ CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
......@@ -914,6 +927,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
......@@ -923,9 +937,14 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
......@@ -950,6 +969,7 @@ CONFIG_DUMP_CODE=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
......
arch/sh/configs/r7780mp_defconfig
浏览文件 @ d3d07d94
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29
# Thu Apr 2 18:20:17 2009
# Linux kernel version: 2.6.30-rc3
# Mon Apr 27 12:53:28 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
......@@ -78,6 +79,7 @@ CONFIG_UID16=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
......@@ -107,6 +109,8 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
......@@ -118,7 +122,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
......@@ -165,6 +168,7 @@ CONFIG_CPU_SH4A=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
CONFIG_CPU_SUBTYPE_SH7780=y
......@@ -174,8 +178,6 @@ CONFIG_CPU_SUBTYPE_SH7780=y
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
......@@ -258,7 +260,7 @@ CONFIG_SH_R7780MP=y
#
CONFIG_SH_TMU=y
CONFIG_SH_TIMER_IRQ=28
CONFIG_SH_PCLK_FREQ=32000000
CONFIG_SH_PCLK_FREQ=33333333
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
......@@ -313,8 +315,6 @@ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
#
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
......@@ -536,6 +536,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
......@@ -696,6 +697,7 @@ CONFIG_E1000=m
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
......@@ -719,6 +721,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
......@@ -920,6 +923,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
......@@ -1027,7 +1031,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
......@@ -1120,6 +1123,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
......@@ -1142,6 +1146,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
......@@ -1191,6 +1200,7 @@ CONFIG_MINIX_FS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
......@@ -1279,6 +1289,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
......@@ -1316,6 +1329,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
......@@ -1325,11 +1339,16 @@ CONFIG_TRACING=y
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
......@@ -1449,6 +1468,7 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
......
arch/sh/configs/r7785rp_defconfig
浏览文件 @ d3d07d94
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29
# Thu Apr 2 18:24:35 2009
# Linux kernel version: 2.6.30-rc3
# Mon Apr 27 12:55:10 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
......@@ -43,6 +44,7 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
......@@ -78,6 +80,7 @@ CONFIG_UID16=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
......@@ -108,6 +111,8 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
......@@ -120,7 +125,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
......@@ -168,6 +172,7 @@ CONFIG_CPU_SHX2=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
......@@ -177,8 +182,6 @@ CONFIG_CPU_SUBTYPE_SH7785=y
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
......@@ -266,7 +269,7 @@ CONFIG_SH_R7785RP=y
#
CONFIG_SH_TMU=y
CONFIG_SH_TIMER_IRQ=28
CONFIG_SH_PCLK_FREQ=50000000
CONFIG_SH_PCLK_FREQ=33333333
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
......@@ -337,8 +340,6 @@ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
#
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_LEGACY is not set
......@@ -561,6 +562,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
......@@ -698,6 +700,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
......@@ -721,6 +724,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
......@@ -948,6 +952,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
......@@ -970,6 +975,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
......@@ -1109,7 +1115,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
......@@ -1202,6 +1207,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
......@@ -1224,6 +1230,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
......@@ -1273,6 +1284,7 @@ CONFIG_MINIX_FS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
......@@ -1359,6 +1371,7 @@ CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
......@@ -1401,6 +1414,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
......@@ -1410,11 +1424,16 @@ CONFIG_TRACING=y
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
......@@ -1534,6 +1553,7 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
......
arch/sh/configs/rsk7201_defconfig
浏览文件 @ d3d07d94
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29
# Thu Apr 2 18:29:08 2009
# Linux kernel version: 2.6.30-rc3
# Mon Apr 27 12:56:29 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
......@@ -65,7 +66,6 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
CONFIG_INITRAMFS_COMPRESSION_NONE=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
......@@ -74,6 +74,7 @@ CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
......@@ -100,6 +101,8 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
......@@ -110,7 +113,6 @@ CONFIG_MODULES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
......@@ -157,6 +159,7 @@ CONFIG_CPU_SUBTYPE_SH7201=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
......@@ -166,8 +169,6 @@ CONFIG_CPU_SUBTYPE_SH7201=y
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
......@@ -602,6 +603,11 @@ CONFIG_EXT2_FS=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
......@@ -651,8 +657,13 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
#
# Partition Types
......@@ -686,11 +697,24 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
......@@ -705,6 +729,7 @@ CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
......
arch/sh/configs/rsk7203_defconfig
浏览文件 @ d3d07d94
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29
# Thu Apr 2 18:30:34 2009
# Linux kernel version: 2.6.30-rc3
# Mon Apr 27 12:57:06 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
......@@ -39,6 +40,7 @@ CONFIG_LOCALVERSION=""
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
......@@ -70,7 +72,6 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
CONFIG_INITRAMFS_COMPRESSION_NONE=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
......@@ -80,6 +81,7 @@ CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
......@@ -106,6 +108,8 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
......@@ -116,7 +120,6 @@ CONFIG_MODULES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
......@@ -163,6 +166,7 @@ CONFIG_CPU_SUBTYPE_SH7203=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
......@@ -172,8 +176,6 @@ CONFIG_CPU_SUBTYPE_SH7203=y
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
......@@ -750,15 +752,17 @@ CONFIG_USB_HID=y
#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
......@@ -874,6 +878,7 @@ CONFIG_LEDS_CLASS=y
# LED drivers
#
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_GPIO_PLATFORM=y
#
# LED Triggers
......@@ -882,6 +887,7 @@ CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
......@@ -950,6 +956,11 @@ CONFIG_FILE_LOCKING=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
......@@ -989,8 +1000,13 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
......@@ -1033,6 +1049,9 @@ CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
......@@ -1076,6 +1095,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
......@@ -1083,11 +1103,16 @@ CONFIG_TRACING=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
......@@ -1111,6 +1136,7 @@ CONFIG_DUMP_CODE=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
......
arch/sh/configs/rts7751r2d1_defconfig
浏览文件 @ d3d07d94
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29
# Thu Apr 2 18:33:25 2009
# Linux kernel version: 2.6.30-rc3
# Mon Apr 27 12:58:13 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
......@@ -70,6 +71,7 @@ CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
......@@ -99,6 +101,8 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
......@@ -110,7 +114,6 @@ CONFIG_MODULES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
......@@ -156,6 +159,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
......@@ -165,8 +169,6 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
......@@ -302,8 +304,6 @@ CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=se
#
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
......@@ -513,6 +513,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
......@@ -672,6 +673,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
......@@ -695,6 +697,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
......@@ -793,6 +796,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=1
CONFIG_SERIAL_SH_SCI_CONSOLE=y
......@@ -1079,15 +1083,17 @@ CONFIG_USB_HID=y
#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
......@@ -1290,6 +1296,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
......@@ -1337,6 +1348,7 @@ CONFIG_MINIX_FS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
......@@ -1417,11 +1429,25 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
......@@ -1524,6 +1550,7 @@ CONFIG_CRYPTO=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
......
arch/sh/configs/rts7751r2dplus_defconfig
浏览文件 @ d3d07d94
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29
# Thu Apr 2 18:34:12 2009
# Linux kernel version: 2.6.30-rc3
# Mon Apr 27 12:59:01 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
......@@ -70,6 +71,7 @@ CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
......@@ -99,6 +101,8 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
......@@ -110,7 +114,6 @@ CONFIG_MODULES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
......@@ -156,6 +159,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
......@@ -165,8 +169,6 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
......@@ -302,8 +304,6 @@ CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=se
#
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
......@@ -424,7 +424,92 @@ CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
# CONFIG_MTD_BLKDEVS is not set
# CONFIG_MTD_BLOCK is not set
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_CISS_DA is not set
......@@ -513,6 +598,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
......@@ -672,6 +758,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
......@@ -695,6 +782,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
......@@ -793,6 +881,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=1
CONFIG_SERIAL_SH_SCI_CONSOLE=y
......@@ -1079,15 +1168,17 @@ CONFIG_USB_HID=y
#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
......@@ -1290,6 +1381,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
......@@ -1337,6 +1433,7 @@ CONFIG_MINIX_FS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
......@@ -1417,11 +1514,25 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
......@@ -1524,6 +1635,7 @@ CONFIG_CRYPTO=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
......
arch/sh/configs/sdk7780_defconfig
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/configs/se7206_defconfig
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/configs/se7343_defconfig
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/configs/se7619_defconfig
浏览文件 @ d3d07d94
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29
# Thu Apr 2 18:44:53 2009
# Linux kernel version: 2.6.30-rc3
# Mon Apr 27 13:02:32 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
......@@ -61,6 +62,7 @@ CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
......@@ -78,11 +80,14 @@ CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=1
......@@ -134,6 +139,7 @@ CONFIG_CPU_SUBTYPE_SH7619=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
......@@ -143,8 +149,6 @@ CONFIG_CPU_SUBTYPE_SH7619=y
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
......@@ -513,7 +517,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
......@@ -563,6 +566,11 @@ CONFIG_FILE_LOCKING=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
......@@ -601,8 +609,13 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
#
# Partition Types
......@@ -630,10 +643,21 @@ CONFIG_FRAME_WARN=1024
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
......@@ -647,6 +671,7 @@ CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
......
arch/sh/configs/se7705_defconfig
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/configs/se7712_defconfig
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/configs/se7721_defconfig
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/configs/se7722_defconfig
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/configs/se7724_defconfig 0 → 100644
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/configs/se7750_defconfig
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/configs/se7751_defconfig
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/configs/se7780_defconfig
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/configs/sh03_defconfig
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/configs/sh7724_generic_defconfig 0 → 100644
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/configs/sh7763rdp_defconfig
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/configs/sh7770_generic_defconfig 0 → 100644
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/configs/sh7785lcr_defconfig
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/configs/shmin_defconfig
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/configs/shx3_defconfig
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/configs/snapgear_defconfig
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/configs/systemh_defconfig
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/configs/titan_defconfig
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/configs/ul2_defconfig
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/configs/urquell_defconfig
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/drivers/dma/Kconfig
浏览文件 @ d3d07d94
......@@ -16,7 +16,8 @@ config SH_DMA_IRQ_MULTI
CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7750R || \
CPU_SUBTYPE_SH7751R || CPU_SUBTYPE_SH7091 || \
CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7764 || \
CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 || \
CPU_SUBTYPE_SH7760
config NR_ONCHIP_DMA_CHANNELS
int
......
arch/sh/drivers/pci/Kconfig
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/drivers/pci/Makefile
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/drivers/pci/fixups-lboxre2.c 已删除 100644 → 0
浏览文件 @ 6cd8e300
此差异已折叠。
arch/sh/drivers/pci/fixups-se7751.c 0 → 100644
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/drivers/pci/fixups-se7780.c 已删除 100644 → 0
浏览文件 @ 6cd8e300
此差异已折叠。
arch/sh/drivers/pci/fixups-sh7785lcr.c 已删除 100644 → 0
浏览文件 @ 6cd8e300
此差异已折叠。
arch/sh/drivers/pci/ops-dreamcast.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/drivers/pci/ops-lboxre2.c 已删除 100644 → 0
浏览文件 @ 6cd8e300
此差异已折叠。
arch/sh/drivers/pci/ops-r7780rp.c 已删除 100644 → 0
浏览文件 @ 6cd8e300
此差异已折叠。
arch/sh/drivers/pci/ops-rts7751r2d.c 已删除 100644 → 0
浏览文件 @ 6cd8e300
此差异已折叠。
arch/sh/drivers/pci/ops-sdk7780.c 已删除 100644 → 0
浏览文件 @ 6cd8e300
此差异已折叠。
arch/sh/drivers/pci/ops-se7780.c 已删除 100644 → 0
浏览文件 @ 6cd8e300
此差异已折叠。
arch/sh/drivers/pci/ops-sh03.c 已删除 100644 → 0
浏览文件 @ 6cd8e300
此差异已折叠。
arch/sh/drivers/pci/ops-sh4.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/drivers/pci/ops-sh5.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/drivers/pci/ops-sh7785lcr.c 已删除 100644 → 0
浏览文件 @ 6cd8e300
此差异已折叠。
arch/sh/drivers/pci/pci-auto.c 已删除 100644 → 0
浏览文件 @ 6cd8e300
此差异已折叠。
arch/sh/drivers/pci/pci-dreamcast.c 0 → 100644
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/drivers/pci/pci-sh4.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/drivers/pci/pci-sh5.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/drivers/pci/pci-sh5.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/drivers/pci/pci-sh7751.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/drivers/pci/pci-sh7751.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/drivers/pci/pci-sh7780.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/drivers/pci/pci-sh7780.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/drivers/pci/pci.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/asm/atomic-llsc.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/asm/atomic.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/asm/cacheflush.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/asm/clock.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/asm/cmpxchg-llsc.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/asm/device.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/asm/hd64461.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/asm/io.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/asm/irq.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/asm/kprobes.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/asm/machvec.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/asm/pci.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/asm/pgtable.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/asm/processor.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/asm/ptrace.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/asm/rtc.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/asm/spinlock.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/asm/swab.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/asm/system_32.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/asm/timer.h 已删除 100644 → 0
浏览文件 @ 6cd8e300
此差异已折叠。
arch/sh/include/asm/types.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/asm/ubc.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/asm/unistd_32.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/asm/unistd_64.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/cpu-sh2a/cpu/ubc.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/cpu-sh3/cpu/timer.h 已删除 100644 → 0
浏览文件 @ 6cd8e300
此差异已折叠。
arch/sh/include/cpu-sh4/cpu/cache.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/cpu-sh4/cpu/freq.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/cpu-sh4/cpu/sh7724.h 0 → 100644
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/cpu-sh4/cpu/timer.h 已删除 100644 → 0
浏览文件 @ 6cd8e300
此差异已折叠。
arch/sh/include/cpu-sh5/cpu/irq.h
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/include/mach-se/mach/se7724.h 0 → 100644
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/Makefile_32
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/Makefile_64
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/cpu/Makefile
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/cpu/clock-cpg.c 0 → 100644
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/cpu/clock.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/cpu/init.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/cpu/irq/imask.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/cpu/irq/intc-sh5.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/cpu/irq/ipr.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/cpu/sh2a/setup-mxg.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/cpu/sh3/clock-sh3.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/cpu/sh4/clock-sh4.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/cpu/sh4/probe.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/cpu/sh4a/Makefile
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/cpu/sh4a/clock-sh7343.c 0 → 100644
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/cpu/sh4a/clock-sh7366.c 0 → 100644
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/cpu/sh4a/clock-sh7723.c 0 → 100644
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/cpu/sh4a/clock-sh7724.c 0 → 100644
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c 0 → 100644
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/cpu/sh4a/setup-sh7724.c 0 → 100644
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/cpu/sh5/Makefile
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/cpu/sh5/clock-sh5.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/cpu/sh5/entry.S
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/cpu/sh5/setup-sh5.c 0 → 100644
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/io.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/io_trapped.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/irq.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/kgdb.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/machvec.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/module.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/process_32.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/ptrace_32.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/setup.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/sh_ksyms_32.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/sh_ksyms_64.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/syscalls_32.S
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/syscalls_64.S
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/time.c 0 → 100644
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/time_32.c 已删除 100644 → 0
浏览文件 @ 6cd8e300
此差异已折叠。
arch/sh/kernel/time_64.c 已删除 100644 → 0
浏览文件 @ 6cd8e300
此差异已折叠。
arch/sh/kernel/timers/Makefile 已删除 100644 → 0
浏览文件 @ 6cd8e300
此差异已折叠。
arch/sh/kernel/timers/timer-cmt.c 已删除 100644 → 0
浏览文件 @ 6cd8e300
此差异已折叠。
arch/sh/kernel/timers/timer-mtu2.c 已删除 100644 → 0
浏览文件 @ 6cd8e300
此差异已折叠。
arch/sh/kernel/timers/timer-tmu.c 已删除 100644 → 0
浏览文件 @ 6cd8e300
此差异已折叠。
arch/sh/kernel/timers/timer.c 已删除 100644 → 0
浏览文件 @ 6cd8e300
此差异已折叠。
arch/sh/kernel/traps.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/traps_32.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/traps_64.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/vmlinux.lds.S
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/kernel/vmlinux_32.lds.S 已删除 100644 → 0
浏览文件 @ 6cd8e300
此差异已折叠。
arch/sh/kernel/vmlinux_64.lds.S 已删除 100644 → 0
浏览文件 @ 6cd8e300
此差异已折叠。
arch/sh/lib64/.gitignore 已删除 100644 → 0
浏览文件 @ 6cd8e300
此差异已折叠。
arch/sh/lib64/dbg.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/lib64/panic.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/lib64/sdivsi3.S
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/lib64/udelay.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/mm/Kconfig
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/mm/cache-sh5.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/mm/init.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/mm/ioremap_32.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/mm/ioremap_64.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/mm/mmap.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/oprofile/common.c
浏览文件 @ d3d07d94
此差异已折叠。
arch/sh/tools/mach-types
浏览文件 @ d3d07d94
此差异已折叠。
drivers/clocksource/Makefile
浏览文件 @ d3d07d94
此差异已折叠。
drivers/clocksource/sh_cmt.c
浏览文件 @ d3d07d94
此差异已折叠。
drivers/clocksource/sh_mtu2.c 0 → 100644
浏览文件 @ d3d07d94
此差异已折叠。
drivers/clocksource/sh_tmu.c 0 → 100644
浏览文件 @ d3d07d94
此差异已折叠。
drivers/i2c/busses/i2c-sh7760.c
浏览文件 @ d3d07d94
此差异已折叠。
drivers/rtc/Kconfig
浏览文件 @ d3d07d94
此差异已折叠。
drivers/serial/sh-sci.c
浏览文件 @ d3d07d94
此差异已折叠。
drivers/serial/sh-sci.h
浏览文件 @ d3d07d94
此差异已折叠。
drivers/sh/intc.c
浏览文件 @ d3d07d94
此差异已折叠。
drivers/video/hitfb.c
浏览文件 @ d3d07d94
此差异已折叠。
include/linux/clocksource.h
浏览文件 @ d3d07d94
此差异已折叠。
include/linux/serial_sci.h
浏览文件 @ d3d07d94
此差异已折叠。
include/linux/time.h
浏览文件 @ d3d07d94
此差异已折叠。
kernel/time/clocksource.c
浏览文件 @ d3d07d94
此差异已折叠。
kernel/time/timekeeping.c
浏览文件 @ d3d07d94
此差异已折叠。
sound/oss/Kconfig
浏览文件 @ d3d07d94
此差异已折叠。
sound/oss/sh_dac_audio.c
浏览文件 @ d3d07d94
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或