提交 aa776721 编写于 作者: I Ivo van Doorn 提交者: John W. Linville

rt2x00: Fix basic rate initialization

The basic rate which is configured in the register
should not match all supported rates, but only the _basic_ rates.

Fix this by adding a new flag to the rt2x00_rate structure
and whenever the mode is changed, loop over all available rates
for that band to get the basic rate mask.
Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 fd3c91c5
......@@ -441,8 +441,8 @@ struct rt2x00lib_conf {
enum ieee80211_band band;
int basic_rates;
int slot_time;
u32 basic_rates;
u32 slot_time;
short sifs;
short pifs;
......
......@@ -145,12 +145,26 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON_LINK);
}
static u32 rt2x00lib_get_basic_rates(struct ieee80211_supported_band *band)
{
const struct rt2x00_rate *rate;
unsigned int i;
u32 mask = 0;
for (i = 0; i < band->n_bitrates; i++) {
rate = rt2x00_get_rate(band->bitrates[i].hw_value);
if (rate->flags & DEV_RATE_BASIC)
mask |= rate->ratemask;
}
return mask;
}
void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
struct ieee80211_conf *conf, const int force_config)
{
struct rt2x00lib_conf libconf;
struct ieee80211_supported_band *band;
struct ieee80211_rate *rate;
struct antenna_setup *default_ant = &rt2x00dev->default_ant;
struct antenna_setup *active_ant = &rt2x00dev->link.ant.active;
int flags = 0;
......@@ -227,10 +241,9 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
if (flags & CONFIG_UPDATE_PHYMODE) {
band = &rt2x00dev->bands[conf->channel->band];
rate = &band->bitrates[band->n_bitrates - 1];
libconf.band = conf->channel->band;
libconf.basic_rates = rt2x00_get_rate(rate->hw_value)->ratemask;
libconf.basic_rates = rt2x00lib_get_basic_rates(band);
}
if (flags & CONFIG_UPDATE_CHANNEL) {
......
......@@ -766,75 +766,75 @@ EXPORT_SYMBOL_GPL(rt2x00lib_write_tx_desc);
*/
const struct rt2x00_rate rt2x00_supported_rates[12] = {
{
.flags = DEV_RATE_CCK,
.flags = DEV_RATE_CCK | DEV_RATE_BASIC,
.bitrate = 10,
.ratemask = DEV_RATEMASK_1MB,
.ratemask = BIT(0),
.plcp = 0x00,
},
{
.flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
.flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE | DEV_RATE_BASIC,
.bitrate = 20,
.ratemask = DEV_RATEMASK_2MB,
.ratemask = BIT(1),
.plcp = 0x01,
},
{
.flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
.flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE | DEV_RATE_BASIC,
.bitrate = 55,
.ratemask = DEV_RATEMASK_5_5MB,
.ratemask = BIT(2),
.plcp = 0x02,
},
{
.flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
.flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE | DEV_RATE_BASIC,
.bitrate = 110,
.ratemask = DEV_RATEMASK_11MB,
.ratemask = BIT(3),
.plcp = 0x03,
},
{
.flags = DEV_RATE_OFDM,
.flags = DEV_RATE_OFDM | DEV_RATE_BASIC,
.bitrate = 60,
.ratemask = DEV_RATEMASK_6MB,
.ratemask = BIT(4),
.plcp = 0x0b,
},
{
.flags = DEV_RATE_OFDM,
.bitrate = 90,
.ratemask = DEV_RATEMASK_9MB,
.ratemask = BIT(5),
.plcp = 0x0f,
},
{
.flags = DEV_RATE_OFDM,
.flags = DEV_RATE_OFDM | DEV_RATE_BASIC,
.bitrate = 120,
.ratemask = DEV_RATEMASK_12MB,
.ratemask = BIT(6),
.plcp = 0x0a,
},
{
.flags = DEV_RATE_OFDM,
.bitrate = 180,
.ratemask = DEV_RATEMASK_18MB,
.ratemask = BIT(7),
.plcp = 0x0e,
},
{
.flags = DEV_RATE_OFDM,
.flags = DEV_RATE_OFDM | DEV_RATE_BASIC,
.bitrate = 240,
.ratemask = DEV_RATEMASK_24MB,
.ratemask = BIT(8),
.plcp = 0x09,
},
{
.flags = DEV_RATE_OFDM,
.bitrate = 360,
.ratemask = DEV_RATEMASK_36MB,
.ratemask = BIT(9),
.plcp = 0x0d,
},
{
.flags = DEV_RATE_OFDM,
.bitrate = 480,
.ratemask = DEV_RATEMASK_48MB,
.ratemask = BIT(10),
.plcp = 0x08,
},
{
.flags = DEV_RATE_OFDM,
.bitrate = 540,
.ratemask = DEV_RATEMASK_54MB,
.ratemask = BIT(11),
.plcp = 0x0c,
},
};
......
......@@ -41,22 +41,10 @@ struct rt2x00_rate {
#define DEV_RATE_CCK 0x0001
#define DEV_RATE_OFDM 0x0002
#define DEV_RATE_SHORT_PREAMBLE 0x0004
#define DEV_RATE_BASIC 0x0008
unsigned short bitrate; /* In 100kbit/s */
unsigned short ratemask;
#define DEV_RATEMASK_1MB ( (1 << 1) - 1 )
#define DEV_RATEMASK_2MB ( (1 << 2) - 1 )
#define DEV_RATEMASK_5_5MB ( (1 << 3) - 1 )
#define DEV_RATEMASK_11MB ( (1 << 4) - 1 )
#define DEV_RATEMASK_6MB ( (1 << 5) - 1 )
#define DEV_RATEMASK_9MB ( (1 << 6) - 1 )
#define DEV_RATEMASK_12MB ( (1 << 7) - 1 )
#define DEV_RATEMASK_18MB ( (1 << 8) - 1 )
#define DEV_RATEMASK_24MB ( (1 << 9) - 1 )
#define DEV_RATEMASK_36MB ( (1 << 10) - 1 )
#define DEV_RATEMASK_48MB ( (1 << 11) - 1 )
#define DEV_RATEMASK_54MB ( (1 << 12) - 1 )
unsigned short plcp;
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册