提交 fd3c91c5 编写于 作者: I Ivo van Doorn 提交者: John W. Linville

rt2x00: Always enable TSF ticking

Whatever mode we are in, according to the legacy drivers
we should always enable TSF ticking/counting.
We should also always enable the TBCN/TBTT field,
this field is only disabled during beacon regeneration.
Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 72fa559b
......@@ -291,7 +291,9 @@ static void rt2400pci_config_intf(struct rt2x00_dev *rt2x00dev,
* Enable synchronisation.
*/
rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 1);
rt2x00_set_field32(&reg, CSR14_TSF_SYNC, conf->sync);
rt2x00_set_field32(&reg, CSR14_TBCN, 1);
rt2x00pci_register_write(rt2x00dev, CSR14, reg);
}
......
......@@ -294,7 +294,9 @@ static void rt2500pci_config_intf(struct rt2x00_dev *rt2x00dev,
* Enable synchronisation.
*/
rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 1);
rt2x00_set_field32(&reg, CSR14_TSF_SYNC, conf->sync);
rt2x00_set_field32(&reg, CSR14_TBCN, 1);
rt2x00pci_register_write(rt2x00dev, CSR14, reg);
}
......
......@@ -343,7 +343,9 @@ static void rt2500usb_config_intf(struct rt2x00_dev *rt2x00dev,
rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg);
rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 1);
rt2x00_set_field16(&reg, TXRX_CSR19_TSF_SYNC, conf->sync);
rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 1);
rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
}
......
......@@ -343,7 +343,9 @@ static void rt61pci_config_intf(struct rt2x00_dev *rt2x00dev,
* Enable synchronisation.
*/
rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, conf->sync);
rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 1);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
}
......
......@@ -355,7 +355,9 @@ static void rt73usb_config_intf(struct rt2x00_dev *rt2x00dev,
* Enable synchronisation.
*/
rt73usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, conf->sync);
rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 1);
rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册