Kconfig 23.9 KB
Newer Older
1
menuconfig REGULATOR
L
Liam Girdwood 已提交
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
	bool "Voltage and Current Regulator Support"
	help
	  Generic Voltage and Current Regulator support.

	  This framework is designed to provide a generic interface to voltage
	  and current regulators within the Linux kernel. It's intended to
	  provide voltage and current control to client or consumer drivers and
	  also provide status information to user space applications through a
	  sysfs interface.

	  The intention is to allow systems to dynamically control regulator
	  output in order to save power and prolong battery life. This applies
	  to both voltage regulators (where voltage output is controllable) and
	  current sinks (where current output is controllable).

	  This framework safely compiles out if not selected so that client
	  drivers can still be used in systems with no software controllable
	  regulators.

	  If unsure, say no.

23

24 25
if REGULATOR

L
Liam Girdwood 已提交
26 27 28 29 30 31
config REGULATOR_DEBUG
	bool "Regulator debug support"
	help
	  Say yes here to enable debugging support.

config REGULATOR_FIXED_VOLTAGE
32 33 34 35 36
	tristate "Fixed voltage regulator support"
	help
	  This driver provides support for fixed voltage regulators,
	  useful for systems which use a combination of software
	  managed regulators and simple non-configurable regulators.
L
Liam Girdwood 已提交
37 38 39 40 41

config REGULATOR_VIRTUAL_CONSUMER
	tristate "Virtual regulator consumer support"
	help
	  This driver provides a virtual consumer for the voltage and
42 43 44
	  current regulator API which provides sysfs controls for
	  configuring the supplies requested.  This is mainly useful
	  for test purposes.
L
Liam Girdwood 已提交
45

46
	  If unsure, say no.
L
Liam Girdwood 已提交
47

48 49 50 51
config REGULATOR_USERSPACE_CONSUMER
	tristate "Userspace regulator consumer support"
	help
	  There are some classes of devices that are controlled entirely
52
	  from user space. Userspace consumer driver provides ability to
53 54
	  control power supplies for such devices.

55
	  If unsure, say no.
56

57 58
config REGULATOR_88PM800
	tristate "Marvell 88PM800 Power regulators"
59
	depends on MFD_88PM800
60 61 62 63 64 65 66
	help
	  This driver supports Marvell 88PM800 voltage regulator chips.
	  It delivers digitally programmable output,
	  the voltage is programmed via I2C interface.
	  It's suitable to support PXA988 chips to control VCC_MAIN and
	  various voltages.

M
Mark Brown 已提交
67
config REGULATOR_88PM8607
68
	tristate "Marvell 88PM8607 Power regulators"
M
Mark Brown 已提交
69
	depends on MFD_88PM860X=y
70
	help
M
Mark Brown 已提交
71
	  This driver supports 88PM8607 voltage regulator chips.
72

73 74 75 76 77 78 79 80
config REGULATOR_ACT8865
	tristate "Active-semi act8865 voltage regulator"
	depends on I2C
	select REGMAP_I2C
	help
	  This driver controls a active-semi act8865 voltage output
	  regulator via I2C bus.

81 82 83
config REGULATOR_AD5398
	tristate "Analog Devices AD5398/AD5821 regulators"
	depends on I2C
84
	help
85 86 87
	  This driver supports AD5398 and AD5821 current regulator chips.
	  If building into module, its name is ad5398.ko.

M
Mark Brown 已提交
88 89 90 91 92 93 94 95
config REGULATOR_ANATOP
	tristate "Freescale i.MX on-chip ANATOP LDO regulators"
	depends on MFD_SYSCON
	help
	  Say y here to support Freescale i.MX on-chip ANATOP LDOs
	  regulators. It is recommended that this option be
	  enabled on i.MX6 platform.

96 97 98 99 100 101 102
config REGULATOR_AAT2870
	tristate "AnalogicTech AAT2870 Regulators"
	depends on MFD_AAT2870_CORE
	help
	  If you have a AnalogicTech AAT2870 say Y to enable the
	  regulator driver.

M
Mark Brown 已提交
103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118
config REGULATOR_AB3100
	tristate "ST-Ericsson AB3100 Regulator functions"
	depends on AB3100_CORE
	default y if AB3100_CORE
	help
	 These regulators correspond to functionality in the
	 AB3100 analog baseband dealing with power regulators
	 for the system.

config REGULATOR_AB8500
	bool "ST-Ericsson AB8500 Power Regulators"
	depends on AB8500_CORE
	help
	  This driver supports the regulators found on the ST-Ericsson mixed
	  signal AB8500 PMIC

119 120 121
config REGULATOR_ARIZONA
	tristate "Wolfson Arizona class devices"
	depends on MFD_ARIZONA
122
	depends on SND_SOC
123 124 125 126
	help
	  Support for the regulators found on Wolfson Arizona class
	  devices.

M
Mark Brown 已提交
127 128 129 130 131 132 133
config REGULATOR_AS3711
	tristate "AS3711 PMIC"
	depends on MFD_AS3711
	help
	  This driver provides support for the voltage regulators on the
	  AS3711 PMIC

134 135 136 137 138 139 140 141
config REGULATOR_AS3722
	tristate "AMS AS3722 PMIC Regulators"
	depends on MFD_AS3722
	help
	  This driver provides support for the voltage regulators on the
	  AS3722 PMIC. This will enable support for all the software
	  controllable DCDC/LDO regulators.

142 143 144 145 146 147 148
config REGULATOR_AXP20X
	tristate "X-POWERS AXP20X PMIC Regulators"
	depends on MFD_AXP20X
	help
	  This driver provides support for the voltage regulators on the
	  AXP20X PMIC.

149 150 151 152 153 154 155 156
config REGULATOR_BCM590XX
	tristate "Broadcom BCM590xx PMU Regulators"
	depends on MFD_BCM590XX
	help
	  This driver provides support for the voltage regulators on the
	  BCM590xx PMUs. This will enable support for the software
	  controllable LDO/Switching regulators.

157 158 159 160 161 162 163 164 165 166 167 168 169 170
config REGULATOR_DA903X
	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
	depends on PMIC_DA903X
	help
	  Say y here to support the BUCKs and LDOs regulators found on
	  Dialog Semiconductor DA9030/DA9034 PMIC.

config REGULATOR_DA9052
	tristate "Dialog Semiconductor DA9052/DA9053 regulators"
	depends on PMIC_DA9052
	help
	  This driver supports the voltage regulators of DA9052-BC and
	  DA9053-AA/Bx PMIC.

A
Ashish Jangam 已提交
171 172 173 174 175 176 177 178 179 180
config REGULATOR_DA9055
	tristate "Dialog Semiconductor DA9055 regulators"
	depends on MFD_DA9055
	help
	  Say y here to support the BUCKs and LDOs regulators found on
	  Dialog Semiconductor DA9055 PMIC.

	  This driver can also be built as a module. If so, the module
	  will be called da9055-regulator.

181 182 183 184 185 186 187 188 189 190
config REGULATOR_DA9062
	tristate "Dialog Semiconductor DA9062 regulators"
	depends on MFD_DA9062
	help
	  Say y here to support the BUCKs and LDOs regulators found on
	  DA9062 PMICs.

	  This driver can also be built as a module. If so, the module
	  will be called da9062-regulator.

191 192 193 194 195 196 197 198 199 200
config REGULATOR_DA9063
	tristate "Dialog Semiconductor DA9063 regulators"
	depends on MFD_DA9063
	help
	  Say y here to support the BUCKs and LDOs regulators found on
	  DA9063 PMICs.

	  This driver can also be built as a module. If so, the module
	  will be called da9063-regulator.

S
Steve Twiss 已提交
201 202 203 204 205 206 207 208
config REGULATOR_DA9210
	tristate "Dialog Semiconductor DA9210 regulator"
	depends on I2C
	select REGMAP_I2C
	help
	  Say y here to support for the Dialog Semiconductor DA9210.
	  The DA9210 is a multi-phase synchronous step down
	  converter 12A DC-DC Buck controlled through an I2C
209 210 211
	  interface.

config REGULATOR_DA9211
J
James Ban 已提交
212
	tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214 regulator"
213 214 215
	depends on I2C
	select REGMAP_I2C
	help
J
James Ban 已提交
216 217 218 219
	  Say y here to support for the Dialog Semiconductor DA9211/DA9212
	  /DA9213/DA9214.
	  The DA9211/DA9212/DA9213/DA9214 is a multi-phase synchronous
	  step down converter 12A or 16A DC-DC Buck controlled through an I2C
S
Steve Twiss 已提交
220 221
	  interface.

M
Mark Brown 已提交
222 223 224 225 226 227 228 229 230 231 232
config REGULATOR_DBX500_PRCMU
	bool

config REGULATOR_DB8500_PRCMU
	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
	depends on MFD_DB8500_PRCMU
	select REGULATOR_DBX500_PRCMU
	help
	  This driver supports the voltage domain regulators controlled by the
	  DB8500 PRCMU

233 234 235 236 237 238 239 240 241 242 243
config REGULATOR_FAN53555
	tristate "Fairchild FAN53555 Regulator"
	depends on I2C
	select REGMAP_I2C
	help
	  This driver supports Fairchild FAN53555 Digitally Programmable
	  TinyBuck Regulator. The FAN53555 is a step-down switching voltage
	  regulator that delivers a digitally programmable output from an
	  input voltage supply of 2.5V to 5.5V. The output voltage is
	  programmed through an I2C interface.

M
Mark Brown 已提交
244 245
config REGULATOR_GPIO
	tristate "GPIO regulator support"
246
	depends on GPIOLIB || COMPILE_TEST
247
	help
M
Mark Brown 已提交
248 249 250 251 252
	  This driver provides support for regulators that can be
	  controlled via gpios.
	  It is capable of supporting current and voltage regulators
	  and the platform has to provide a mapping of GPIO-states
	  to target volts/amps.
253

254 255 256 257 258 259 260 261 262 263
config REGULATOR_HI6421
	tristate "HiSilicon Hi6421 PMIC voltage regulator support"
	depends on MFD_HI6421_PMIC && OF
	help
	  This driver provides support for the voltage regulators on the
	  HiSilicon Hi6421 PMU / Codec IC.
	  Hi6421 is a multi-function device which, on regulator part, provides
	  21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
	  of them come with support to either ECO (idle) or sleep mode.

264 265 266
config REGULATOR_ISL9305
	tristate "Intersil ISL9305 regulator"
	depends on I2C
267
	select REGMAP_I2C
268 269 270
	help
	  This driver supports ISL9305 voltage regulator chip.

M
Mark Brown 已提交
271 272 273 274 275
config REGULATOR_ISL6271A
	tristate "Intersil ISL6271A Power regulator"
	depends on I2C
	help
	  This driver supports ISL6271A voltage regulator chip.
276

M
Mark Brown 已提交
277 278 279
config REGULATOR_LP3971
	tristate "National Semiconductors LP3971 PMIC regulator driver"
	depends on I2C
280
	help
M
Mark Brown 已提交
281 282
	 Say Y here to support the voltage regulators and convertors
	 on National Semiconductors LP3971 PMIC
283

M
Mark Brown 已提交
284 285 286
config REGULATOR_LP3972
	tristate "National Semiconductors LP3972 PMIC regulator driver"
	depends on I2C
287
	help
M
Mark Brown 已提交
288 289
	 Say Y here to support the voltage regulators and convertors
	 on National Semiconductors LP3972 PMIC
290

M
Mark Brown 已提交
291
config REGULATOR_LP872X
292
	tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
293
	depends on I2C
M
Mark Brown 已提交
294 295 296 297 298 299
	select REGMAP_I2C
	help
	  This driver supports LP8720/LP8725 PMIC

config REGULATOR_LP8755
	tristate "TI LP8755 High Performance PMU driver"
300
	depends on I2C
M
Mark Brown 已提交
301
	select REGMAP_I2C
302
	help
M
Mark Brown 已提交
303 304 305
	  This driver supports LP8755 High Performance PMU driver. This
	  chip contains six step-down DC/DC converters which can support
	  9 mode multiphase configuration.
306

M
Mark Brown 已提交
307
config REGULATOR_LP8788
308
	tristate "TI LP8788 Power Regulators"
M
Mark Brown 已提交
309
	depends on MFD_LP8788
310
	help
M
Mark Brown 已提交
311
	  This driver supports LP8788 voltage regulator chip.
312

P
Philipp Zabel 已提交
313
config REGULATOR_LTC3589
314 315 316
	tristate "LTC3589 8-output voltage regulator"
	depends on I2C
	select REGMAP_I2C
P
Philipp Zabel 已提交
317 318 319 320
	help
	  This enables support for the LTC3589, LTC3589-1, and LTC3589-2
	  8-output regulators controlled via I2C.

321
config REGULATOR_MAX14577
322
	tristate "Maxim 14577/77836 regulator"
323 324
	depends on MFD_MAX14577
	help
325 326 327
	  This driver controls a Maxim MAX14577/77836 regulator via I2C bus.
	  The MAX14577 regulators include safeout LDO and charger current
	  regulator. The MAX77836 has two additional LDOs.
328

R
Robert Jarzmik 已提交
329 330 331 332 333 334 335 336
config REGULATOR_MAX1586
	tristate "Maxim 1586/1587 voltage regulator"
	depends on I2C
	help
	  This driver controls a Maxim 1586 or 1587 voltage output
	  regulator via I2C bus. The provided regulator is suitable
	  for PXA27x chips to control VCC_CORE and VCC_USIM voltages.

337 338 339
config REGULATOR_MAX8649
	tristate "Maxim 8649 voltage regulator"
	depends on I2C
340
	select REGMAP_I2C
341 342 343 344
	help
	  This driver controls a Maxim 8649 voltage output regulator via
	  I2C bus.

345 346 347 348 349 350 351
config REGULATOR_MAX8660
	tristate "Maxim 8660/8661 voltage regulator"
	depends on I2C
	help
	  This driver controls a Maxim 8660/8661 voltage output
	  regulator via I2C bus.

G
Gyungoh Yoo 已提交
352 353 354 355 356 357 358 359
config REGULATOR_MAX8907
	tristate "Maxim 8907 voltage regulator"
	depends on MFD_MAX8907
	help
	  This driver controls a Maxim 8907 voltage output regulator
	  via I2C bus. The provided regulator is suitable for Tegra
	  chip to control Step-Down DC-DC and LDOs.

H
Haojian Zhuang 已提交
360 361 362 363 364 365
config REGULATOR_MAX8925
	tristate "Maxim MAX8925 Power Management IC"
	depends on MFD_MAX8925
	help
	  Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.

M
MyungJoo Ham 已提交
366 367 368 369 370 371 372 373
config REGULATOR_MAX8952
	tristate "Maxim MAX8952 Power Management IC"
	depends on I2C
	help
	  This driver controls a Maxim 8952 voltage output regulator
	  via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
	  modes ranging from 0.77V to 1.40V by 0.01V steps.

374 375 376 377 378 379 380 381 382 383
config REGULATOR_MAX8973
	tristate "Maxim MAX8973 voltage regulator "
	depends on I2C
	select REGMAP_I2C
	help
	  The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
	  switching regulator delievers up to 9A of output current. Each
	  phase operates at a 2MHz fixed frequency with a 120 deg shift
	  from the adjacent phase, allowing the use of small magnetic component.

M
MyungJoo Ham 已提交
384 385 386 387 388 389 390 391 392
config REGULATOR_MAX8997
	tristate "Maxim 8997/8966 regulator"
	depends on MFD_MAX8997
	help
	  This driver controls a Maxim 8997/8966 regulator
	  via I2C bus. The provided regulator is suitable for S5PC110,
	  S5PV210, and Exynos-4 chips to control VCC_CORE and
	  VCC_USIM voltages.

393 394
config REGULATOR_MAX8998
	tristate "Maxim 8998 voltage regulator"
395
	depends on MFD_MAX8998
396 397 398 399 400
	help
	  This driver controls a Maxim 8998 voltage output regulator
	  via I2C bus. The provided regulator is suitable for S3C6410
	  and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.

401 402 403 404 405 406 407 408
config REGULATOR_MAX77686
	tristate "Maxim 77686 regulator"
	depends on MFD_MAX77686
	help
	  This driver controls a Maxim 77686 regulator
	  via I2C bus. The provided regulator is suitable for
	  Exynos-4 chips to control VARM and VINT voltages.

409 410 411 412 413 414 415 416 417
config REGULATOR_MAX77693
	tristate "Maxim MAX77693 regulator"
	depends on MFD_MAX77693
	help
	  This driver controls a Maxim 77693 regulator via I2C bus.
	  The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
	  and one current regulator 'CHARGER'. This is suitable for
	  Exynos-4x12 chips.

418 419 420 421 422 423 424 425 426
config REGULATOR_MAX77802
	tristate "Maxim 77802 regulator"
	depends on MFD_MAX77686
	help
	  This driver controls a Maxim 77802 regulator
	  via I2C bus. The provided regulator is suitable for
	  Exynos5420/Exynos5800 SoCs to control various voltages.
	  It includes support for control of voltage and ramp speed.

427 428 429 430 431 432 433 434
config REGULATOR_MAX77843
	tristate "Maxim 77843 regulator"
	depends on MFD_MAX77843
	help
	  This driver controls a Maxim 77843 regulator.
	  The regulator include two 'SAFEOUT' for USB(Universal Serial Bus)
	  This is suitable for Exynos5433 SoC chips.

M
Mark Brown 已提交
435 436
config REGULATOR_MC13XXX_CORE
	tristate
B
Balaji Rao 已提交
437

M
Mark Brown 已提交
438 439
config REGULATOR_MC13783
	tristate "Freescale MC13783 regulator driver"
440
	depends on MFD_MC13XXX
M
Mark Brown 已提交
441
	select REGULATOR_MC13XXX_CORE
442
	help
M
Mark Brown 已提交
443 444
	  Say y here to support the regulators found on the Freescale MC13783
	  PMIC.
445

M
Mark Brown 已提交
446 447 448 449
config REGULATOR_MC13892
	tristate "Freescale MC13892 regulator driver"
	depends on MFD_MC13XXX
	select REGULATOR_MC13XXX_CORE
A
Axel Lin 已提交
450
	help
M
Mark Brown 已提交
451 452
	  Say y here to support the regulators found on the Freescale MC13892
	  PMIC.
A
Axel Lin 已提交
453

454 455 456 457 458 459 460 461 462
config REGULATOR_MT6397
	tristate "MediaTek MT6397 PMIC"
	depends on MFD_MT6397
	help
	  Say y here to select this option to enable the power regulator of
	  MediaTek MT6397 PMIC.
	  This driver supports the control of different power rails of device
	  through regulator interface.

M
Mark Brown 已提交
463 464 465
config REGULATOR_PALMAS
	tristate "TI Palmas PMIC Regulators"
	depends on MFD_PALMAS
466
	help
M
Mark Brown 已提交
467 468 469
	  If you wish to control the regulators on the Palmas series of
	  chips say Y here. This will enable support for all the software
	  controllable SMPS/LDO regulators.
470

M
Mark Brown 已提交
471 472 473
	  The regulators available on Palmas series chips vary depending
	  on the muxing. This is handled automatically in the driver by
	  reading the mux info from OTP.
474

475 476 477 478 479 480 481 482 483
config REGULATOR_PBIAS
	tristate "PBIAS OMAP regulator driver"
	depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON
	help
	 Say y here to support pbias regulator for mmc1:SD card i/o
	 on OMAP SoCs.
	 This driver provides support for OMAP pbias modelled
	 regulators.

M
Mark Brown 已提交
484 485 486
config REGULATOR_PCAP
	tristate "Motorola PCAP2 regulator driver"
	depends on EZX_PCAP
487
	help
M
Mark Brown 已提交
488 489
	 This driver provides support for the voltage regulators of the
	 PCAP2 PMIC.
490

491 492
config REGULATOR_PCF50633
	tristate "NXP PCF50633 regulator driver"
493
	depends on MFD_PCF50633
494
	help
495 496
	 Say Y here to support the voltage regulators and convertors
	 on PCF50633
497

498
config REGULATOR_PFUZE100
499
	tristate "Freescale PFUZE100/PFUZE200 regulator driver"
500
	depends on I2C
501
	select REGMAP_I2C
502
	help
503 504
	  Say y here to support the regulators found on the Freescale
	  PFUZE100/PFUZE200 PMIC.
505

506 507 508 509 510 511 512
config REGULATOR_PWM
	tristate "PWM voltage regulator"
	depends on PWM
	help
	  This driver supports PWM controlled voltage regulators. PWM
	  duty cycle can increase or decrease the voltage.

513 514 515 516 517 518 519 520 521 522 523 524
config REGULATOR_QCOM_RPM
	tristate "Qualcomm RPM regulator driver"
	depends on MFD_QCOM_RPM
	help
	  If you say yes to this option, support will be included for the
	  regulators exposed by the Resource Power Manager found in Qualcomm
	  8660, 8960 and 8064 based devices.

	  Say M here if you want to include support for the regulators on the
	  Qualcomm RPM as a module. The module will be named
	  "qcom_rpm-regulator".

525 526 527 528 529 530 531 532 533 534 535
config REGULATOR_QCOM_SPMI
	tristate "Qualcomm SPMI regulator driver"
	depends on SPMI || COMPILE_TEST
	help
	  If you say yes to this option, support will be included for the
	  regulators found in Qualcomm SPMI PMICs.

	  Say M here if you want to include support for the regulators on the
	  Qualcomm SPMI PMICs as a module. The module will be named
	  "qcom_spmi-regulator".

536 537 538 539 540 541 542 543 544 545
config REGULATOR_RC5T583
	tristate "RICOH RC5T583 Power regulators"
	depends on MFD_RC5T583
	help
	  Select this option to enable the power regulator of RICOH
	  PMIC RC5T583.
	  This driver supports the control of different power rails of device
	  through regulator interface. The device supports multiple DCDC/LDO
	  outputs which can be controlled by i2c communication.

546 547 548 549 550 551 552 553 554 555
config REGULATOR_RK808
	tristate "Rockchip RK808 Power regulators"
	depends on MFD_RK808
	help
	  Select this option to enable the power regulator of ROCKCHIP
	  PMIC RK808.
	  This driver supports the control of different power rails of device
	  through regulator interface. The device supports multiple DCDC/LDO
	  outputs which can be controlled by i2c communication.

556 557 558 559 560 561
config REGULATOR_RN5T618
	tristate "Ricoh RN5T618 voltage regulators"
	depends on MFD_RN5T618
	help
	  Say y here to support the regulators found on Ricoh RN5T618 PMIC.

562 563 564 565 566 567 568 569
config REGULATOR_RT5033
	tristate "Richtek RT5033 Regulators"
	depends on MFD_RT5033
	help
	  This adds support for voltage and current regulators in Richtek
	  RT5033 PMIC. The device supports multiple regulators like
	  current source, LDO and Buck.

570 571 572 573 574 575 576
config REGULATOR_S2MPA01
	tristate "Samsung S2MPA01 voltage regulator"
	depends on MFD_SEC_CORE
	help
	 This driver controls Samsung S2MPA01 voltage output regulator
	 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.

577
config REGULATOR_S2MPS11
578
	tristate "Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage regulator"
579 580
	depends on MFD_SEC_CORE
	help
581 582 583 584
	 This driver supports a Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage
	 output regulator via I2C bus. The chip is comprised of high efficient
	 Buck converters including Dual-Phase Buck converter, Buck-Boost
	 converter, various LDOs.
585

586 587
config REGULATOR_S5M8767
	tristate "Samsung S5M8767A voltage regulator"
588
	depends on MFD_SEC_CORE
Y
Yong Shen 已提交
589
	help
590 591 592
	 This driver supports a Samsung S5M8767A voltage output regulator
	 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
	 supports DVS mode with 8bits of output voltage control.
Y
Yong Shen 已提交
593

594 595
config REGULATOR_SKY81452
	tristate "Skyworks Solutions SKY81452 voltage regulator"
596
	depends on MFD_SKY81452
597
	help
598 599 600 601 602 603
	  This driver supports Skyworks SKY81452 voltage output regulator
	  via I2C bus. SKY81452 has one voltage linear regulator can be
	  programmed from 4.5V to 20V.

	  This driver can also be built as a module. If so, the module
	  will be called sky81452-regulator.
604

M
Mark Brown 已提交
605
config REGULATOR_TI_ABB
606
	tristate "TI Adaptive Body Bias on-chip LDO"
M
Mark Brown 已提交
607
	depends on ARCH_OMAP
608
	help
M
Mark Brown 已提交
609 610 611 612 613
	  Select this option to support Texas Instruments' on-chip Adaptive Body
	  Bias (ABB) LDO regulators. It is recommended that this option be
	  enabled on required TI SoC. Certain Operating Performance Points
	  on TI SoCs may be unstable without enabling this as it provides
	  device specific optimized bias to allow/optimize functionality.
614

615 616 617 618 619 620 621 622
config REGULATOR_STW481X_VMMC
	bool "ST Microelectronics STW481X VMMC regulator"
	depends on MFD_STW481X
	default y if MFD_STW481X
	help
	  This driver supports the internal VMMC regulator in the STw481x
	  PMIC chips.

623 624 625 626 627 628
config REGULATOR_TPS51632
	tristate "TI TPS51632 Power Regulator"
	depends on I2C
	select REGMAP_I2C
	help
	  This driver supports TPS51632 voltage regulator chip.
629
	  The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
630 631 632 633
	  with Serial VID control and DVFS.
	  The voltage output can be configure through I2C interface or PWM
	  interface.

634 635 636 637 638 639 640 641 642
config REGULATOR_TPS6105X
	tristate "TI TPS6105X Power regulators"
	depends on TPS6105X
	default y if TPS6105X
	help
	  This driver supports TPS61050/TPS61052 voltage regulator chips.
	  It is a single boost converter primarily for white LEDs and
	  audio amplifiers.

643
config REGULATOR_TPS62360
644
	tristate "TI TPS6236x Power Regulator"
645 646 647
	depends on I2C
	select REGMAP_I2C
	help
648
	  This driver supports TPS6236x voltage regulator chip. This
649 650 651 652
	  regulator is meant for processor core supply. This chip is
	  high-frequency synchronous step down dc-dc converter optimized
	  for battery-powered portable applications.

653 654 655
config REGULATOR_TPS65023
	tristate "TI TPS65023 Power regulators"
	depends on I2C
656
	select REGMAP_I2C
657 658 659 660 661 662 663 664 665 666 667 668 669
	help
	  This driver supports TPS65023 voltage regulator chips. TPS65023 provides
	  three step-down converters and two general-purpose LDO voltage regulators.
	  It supports TI's software based Class-2 SmartReflex implementation.

config REGULATOR_TPS6507X
	tristate "TI TPS6507X Power regulators"
	depends on I2C
	help
	  This driver supports TPS6507X voltage regulator chips. TPS6507X provides
	  three step-down converters and two general-purpose LDO voltage regulators.
	  It supports TI's software based Class-2 SmartReflex implementation.

670 671 672 673 674 675 676
config REGULATOR_TPS65090
	tristate "TI TPS65090 Power regulator"
	depends on MFD_TPS65090
	help
	  This driver provides support for the voltage regulators on the
	  TI TPS65090 PMIC.

677 678 679
config REGULATOR_TPS65217
	tristate "TI TPS65217 Power regulators"
	depends on MFD_TPS65217
M
Margarita Olaya 已提交
680
	help
681 682 683 684
	  This driver supports TPS65217 voltage regulator chips. TPS65217
	  provides three step-down converters and four general-purpose LDO
	  voltage regulators. It supports software based voltage control
	  for different voltage domains
M
Margarita Olaya 已提交
685

686 687
config REGULATOR_TPS65218
	tristate "TI TPS65218 Power regulators"
688
	depends on MFD_TPS65218 && OF
689 690 691 692 693 694
	help
	  This driver supports TPS65218 voltage regulator chips. TPS65218
	  provides six step-down converters and one general-purpose LDO
	  voltage regulators. It supports software based voltage control
	  for different voltage domains

695 696 697
config REGULATOR_TPS6524X
	tristate "TI TPS6524X Power regulators"
	depends on SPI
698
	help
699 700 701 702 703
	  This driver supports TPS6524X voltage regulator chips. TPS6524X
	  provides three step-down converters and two general-purpose LDO
	  voltage regulators.  This device is interfaced using a customized
	  serial interface currently supported on the sequencer serial
	  port controller.
704

705 706 707
config REGULATOR_TPS6586X
	tristate "TI TPS6586X Power regulators"
	depends on MFD_TPS6586X
708
	help
709
	  This driver supports TPS6586X voltage regulator chips.
710

711
config REGULATOR_TPS65910
712
	tristate "TI TPS65910/TPS65911 Power Regulators"
713
	depends on MFD_TPS65910
714
	help
715
	  This driver supports TPS65910/TPS65911 voltage regulator chips.
716

717 718 719
config REGULATOR_TPS65912
	tristate "TI TPS65912 Power regulator"
	depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
720
	help
721
	    This driver supports TPS65912 voltage regulator chip.
722

723 724 725 726 727 728 729 730 731
config REGULATOR_TPS80031
	tristate "TI TPS80031/TPS80032 power regualtor driver"
	depends on MFD_TPS80031
	help
	  TPS80031/ TPS80032 Fully Integrated Power Management with Power
	  Path and Battery Charger. It has 5 configurable step-down
	  converters, 11 general purpose LDOs, VBUS generator and digital
	  output to control regulators.

732
config REGULATOR_TWL4030
733
	tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
734
	depends on TWL4030_CORE
735
	help
736 737
	  This driver supports the voltage regulators provided by
	  this family of companion chips.
738

739 740 741 742 743 744 745
config REGULATOR_VEXPRESS
	tristate "Versatile Express regulators"
	depends on VEXPRESS_CONFIG
	help
	  This driver provides support for voltage regulators available
	  on the ARM Ltd's Versatile Express platform.

746 747 748
config REGULATOR_WM831X
	tristate "Wolfson Microelectronics WM831x PMIC regulators"
	depends on MFD_WM831X
749
	help
750 751
	  Support the voltage and current regulators of the WM831x series
	  of PMIC devices.
752

753 754 755
config REGULATOR_WM8350
	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
	depends on MFD_WM8350
756
	help
757
	  This driver provides support for the voltage and current regulators
758
	  of the WM8350 AudioPlus PMIC.
759

760 761 762
config REGULATOR_WM8400
	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
	depends on MFD_WM8400
763
	help
764 765
	  This driver provides support for the voltage regulators of the
	  WM8400 AudioPlus PMIC.
766

767 768 769
config REGULATOR_WM8994
	tristate "Wolfson Microelectronics WM8994 CODEC"
	depends on MFD_WM8994
770
	help
771 772
	  This driver provides support for the voltage regulators on the
	  WM8994 CODEC.
773

774
endif
775