Kconfig 22.5 KB
Newer Older
1
menuconfig REGULATOR
L
Liam Girdwood 已提交
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
	bool "Voltage and Current Regulator Support"
	help
	  Generic Voltage and Current Regulator support.

	  This framework is designed to provide a generic interface to voltage
	  and current regulators within the Linux kernel. It's intended to
	  provide voltage and current control to client or consumer drivers and
	  also provide status information to user space applications through a
	  sysfs interface.

	  The intention is to allow systems to dynamically control regulator
	  output in order to save power and prolong battery life. This applies
	  to both voltage regulators (where voltage output is controllable) and
	  current sinks (where current output is controllable).

	  This framework safely compiles out if not selected so that client
	  drivers can still be used in systems with no software controllable
	  regulators.

	  If unsure, say no.

23

24 25
if REGULATOR

L
Liam Girdwood 已提交
26 27 28 29 30 31
config REGULATOR_DEBUG
	bool "Regulator debug support"
	help
	  Say yes here to enable debugging support.

config REGULATOR_FIXED_VOLTAGE
32 33 34 35 36
	tristate "Fixed voltage regulator support"
	help
	  This driver provides support for fixed voltage regulators,
	  useful for systems which use a combination of software
	  managed regulators and simple non-configurable regulators.
L
Liam Girdwood 已提交
37 38 39 40 41

config REGULATOR_VIRTUAL_CONSUMER
	tristate "Virtual regulator consumer support"
	help
	  This driver provides a virtual consumer for the voltage and
42 43 44
	  current regulator API which provides sysfs controls for
	  configuring the supplies requested.  This is mainly useful
	  for test purposes.
L
Liam Girdwood 已提交
45

46
	  If unsure, say no.
L
Liam Girdwood 已提交
47

48 49 50 51
config REGULATOR_USERSPACE_CONSUMER
	tristate "Userspace regulator consumer support"
	help
	  There are some classes of devices that are controlled entirely
52
	  from user space. Userspace consumer driver provides ability to
53 54
	  control power supplies for such devices.

55
	  If unsure, say no.
56

57 58
config REGULATOR_88PM800
	tristate "Marvell 88PM800 Power regulators"
59
	depends on MFD_88PM800
60 61 62 63 64 65 66
	help
	  This driver supports Marvell 88PM800 voltage regulator chips.
	  It delivers digitally programmable output,
	  the voltage is programmed via I2C interface.
	  It's suitable to support PXA988 chips to control VCC_MAIN and
	  various voltages.

M
Mark Brown 已提交
67
config REGULATOR_88PM8607
68
	tristate "Marvell 88PM8607 Power regulators"
M
Mark Brown 已提交
69
	depends on MFD_88PM860X=y
70
	help
M
Mark Brown 已提交
71
	  This driver supports 88PM8607 voltage regulator chips.
72

73 74 75 76 77 78 79 80
config REGULATOR_ACT8865
	tristate "Active-semi act8865 voltage regulator"
	depends on I2C
	select REGMAP_I2C
	help
	  This driver controls a active-semi act8865 voltage output
	  regulator via I2C bus.

81 82 83
config REGULATOR_AD5398
	tristate "Analog Devices AD5398/AD5821 regulators"
	depends on I2C
84
	help
85 86 87
	  This driver supports AD5398 and AD5821 current regulator chips.
	  If building into module, its name is ad5398.ko.

M
Mark Brown 已提交
88 89 90 91 92 93 94 95
config REGULATOR_ANATOP
	tristate "Freescale i.MX on-chip ANATOP LDO regulators"
	depends on MFD_SYSCON
	help
	  Say y here to support Freescale i.MX on-chip ANATOP LDOs
	  regulators. It is recommended that this option be
	  enabled on i.MX6 platform.

96 97 98 99 100 101 102
config REGULATOR_AAT2870
	tristate "AnalogicTech AAT2870 Regulators"
	depends on MFD_AAT2870_CORE
	help
	  If you have a AnalogicTech AAT2870 say Y to enable the
	  regulator driver.

M
Mark Brown 已提交
103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118
config REGULATOR_AB3100
	tristate "ST-Ericsson AB3100 Regulator functions"
	depends on AB3100_CORE
	default y if AB3100_CORE
	help
	 These regulators correspond to functionality in the
	 AB3100 analog baseband dealing with power regulators
	 for the system.

config REGULATOR_AB8500
	bool "ST-Ericsson AB8500 Power Regulators"
	depends on AB8500_CORE
	help
	  This driver supports the regulators found on the ST-Ericsson mixed
	  signal AB8500 PMIC

119 120 121
config REGULATOR_ARIZONA
	tristate "Wolfson Arizona class devices"
	depends on MFD_ARIZONA
122
	depends on SND_SOC
123 124 125 126
	help
	  Support for the regulators found on Wolfson Arizona class
	  devices.

M
Mark Brown 已提交
127 128 129 130 131 132 133
config REGULATOR_AS3711
	tristate "AS3711 PMIC"
	depends on MFD_AS3711
	help
	  This driver provides support for the voltage regulators on the
	  AS3711 PMIC

134 135 136 137 138 139 140 141
config REGULATOR_AS3722
	tristate "AMS AS3722 PMIC Regulators"
	depends on MFD_AS3722
	help
	  This driver provides support for the voltage regulators on the
	  AS3722 PMIC. This will enable support for all the software
	  controllable DCDC/LDO regulators.

142 143 144 145 146 147 148
config REGULATOR_AXP20X
	tristate "X-POWERS AXP20X PMIC Regulators"
	depends on MFD_AXP20X
	help
	  This driver provides support for the voltage regulators on the
	  AXP20X PMIC.

149 150 151 152 153 154 155 156
config REGULATOR_BCM590XX
	tristate "Broadcom BCM590xx PMU Regulators"
	depends on MFD_BCM590XX
	help
	  This driver provides support for the voltage regulators on the
	  BCM590xx PMUs. This will enable support for the software
	  controllable LDO/Switching regulators.

157 158 159 160 161 162 163 164 165 166 167 168 169 170
config REGULATOR_DA903X
	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
	depends on PMIC_DA903X
	help
	  Say y here to support the BUCKs and LDOs regulators found on
	  Dialog Semiconductor DA9030/DA9034 PMIC.

config REGULATOR_DA9052
	tristate "Dialog Semiconductor DA9052/DA9053 regulators"
	depends on PMIC_DA9052
	help
	  This driver supports the voltage regulators of DA9052-BC and
	  DA9053-AA/Bx PMIC.

A
Ashish Jangam 已提交
171 172 173 174 175 176 177 178 179 180
config REGULATOR_DA9055
	tristate "Dialog Semiconductor DA9055 regulators"
	depends on MFD_DA9055
	help
	  Say y here to support the BUCKs and LDOs regulators found on
	  Dialog Semiconductor DA9055 PMIC.

	  This driver can also be built as a module. If so, the module
	  will be called da9055-regulator.

181 182 183 184 185 186 187 188 189 190
config REGULATOR_DA9063
	tristate "Dialog Semiconductor DA9063 regulators"
	depends on MFD_DA9063
	help
	  Say y here to support the BUCKs and LDOs regulators found on
	  DA9063 PMICs.

	  This driver can also be built as a module. If so, the module
	  will be called da9063-regulator.

S
Steve Twiss 已提交
191 192 193 194 195 196 197 198
config REGULATOR_DA9210
	tristate "Dialog Semiconductor DA9210 regulator"
	depends on I2C
	select REGMAP_I2C
	help
	  Say y here to support for the Dialog Semiconductor DA9210.
	  The DA9210 is a multi-phase synchronous step down
	  converter 12A DC-DC Buck controlled through an I2C
199 200 201
	  interface.

config REGULATOR_DA9211
J
James Ban 已提交
202
	tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214 regulator"
203 204 205
	depends on I2C
	select REGMAP_I2C
	help
J
James Ban 已提交
206 207 208 209
	  Say y here to support for the Dialog Semiconductor DA9211/DA9212
	  /DA9213/DA9214.
	  The DA9211/DA9212/DA9213/DA9214 is a multi-phase synchronous
	  step down converter 12A or 16A DC-DC Buck controlled through an I2C
S
Steve Twiss 已提交
210 211
	  interface.

M
Mark Brown 已提交
212 213 214 215 216 217 218 219 220 221 222
config REGULATOR_DBX500_PRCMU
	bool

config REGULATOR_DB8500_PRCMU
	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
	depends on MFD_DB8500_PRCMU
	select REGULATOR_DBX500_PRCMU
	help
	  This driver supports the voltage domain regulators controlled by the
	  DB8500 PRCMU

223 224 225 226 227 228 229 230 231 232 233
config REGULATOR_FAN53555
	tristate "Fairchild FAN53555 Regulator"
	depends on I2C
	select REGMAP_I2C
	help
	  This driver supports Fairchild FAN53555 Digitally Programmable
	  TinyBuck Regulator. The FAN53555 is a step-down switching voltage
	  regulator that delivers a digitally programmable output from an
	  input voltage supply of 2.5V to 5.5V. The output voltage is
	  programmed through an I2C interface.

M
Mark Brown 已提交
234 235 236
config REGULATOR_GPIO
	tristate "GPIO regulator support"
	depends on GPIOLIB
237
	help
M
Mark Brown 已提交
238 239 240 241 242
	  This driver provides support for regulators that can be
	  controlled via gpios.
	  It is capable of supporting current and voltage regulators
	  and the platform has to provide a mapping of GPIO-states
	  to target volts/amps.
243

244 245 246 247 248 249 250 251 252 253
config REGULATOR_HI6421
	tristate "HiSilicon Hi6421 PMIC voltage regulator support"
	depends on MFD_HI6421_PMIC && OF
	help
	  This driver provides support for the voltage regulators on the
	  HiSilicon Hi6421 PMU / Codec IC.
	  Hi6421 is a multi-function device which, on regulator part, provides
	  21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
	  of them come with support to either ECO (idle) or sleep mode.

254 255 256
config REGULATOR_ISL9305
	tristate "Intersil ISL9305 regulator"
	depends on I2C
257
	select REGMAP_I2C
258 259 260
	help
	  This driver supports ISL9305 voltage regulator chip.

M
Mark Brown 已提交
261 262 263 264 265
config REGULATOR_ISL6271A
	tristate "Intersil ISL6271A Power regulator"
	depends on I2C
	help
	  This driver supports ISL6271A voltage regulator chip.
266

M
Mark Brown 已提交
267 268 269
config REGULATOR_LP3971
	tristate "National Semiconductors LP3971 PMIC regulator driver"
	depends on I2C
270
	help
M
Mark Brown 已提交
271 272
	 Say Y here to support the voltage regulators and convertors
	 on National Semiconductors LP3971 PMIC
273

M
Mark Brown 已提交
274 275 276
config REGULATOR_LP3972
	tristate "National Semiconductors LP3972 PMIC regulator driver"
	depends on I2C
277
	help
M
Mark Brown 已提交
278 279
	 Say Y here to support the voltage regulators and convertors
	 on National Semiconductors LP3972 PMIC
280

M
Mark Brown 已提交
281
config REGULATOR_LP872X
282
	tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
283
	depends on I2C
M
Mark Brown 已提交
284 285 286 287 288 289
	select REGMAP_I2C
	help
	  This driver supports LP8720/LP8725 PMIC

config REGULATOR_LP8755
	tristate "TI LP8755 High Performance PMU driver"
290
	depends on I2C
M
Mark Brown 已提交
291
	select REGMAP_I2C
292
	help
M
Mark Brown 已提交
293 294 295
	  This driver supports LP8755 High Performance PMU driver. This
	  chip contains six step-down DC/DC converters which can support
	  9 mode multiphase configuration.
296

M
Mark Brown 已提交
297
config REGULATOR_LP8788
298
	tristate "TI LP8788 Power Regulators"
M
Mark Brown 已提交
299
	depends on MFD_LP8788
300
	help
M
Mark Brown 已提交
301
	  This driver supports LP8788 voltage regulator chip.
302

P
Philipp Zabel 已提交
303
config REGULATOR_LTC3589
304 305 306
	tristate "LTC3589 8-output voltage regulator"
	depends on I2C
	select REGMAP_I2C
P
Philipp Zabel 已提交
307 308 309 310
	help
	  This enables support for the LTC3589, LTC3589-1, and LTC3589-2
	  8-output regulators controlled via I2C.

311
config REGULATOR_MAX14577
312
	tristate "Maxim 14577/77836 regulator"
313 314
	depends on MFD_MAX14577
	help
315 316 317
	  This driver controls a Maxim MAX14577/77836 regulator via I2C bus.
	  The MAX14577 regulators include safeout LDO and charger current
	  regulator. The MAX77836 has two additional LDOs.
318

R
Robert Jarzmik 已提交
319 320 321 322 323 324 325 326
config REGULATOR_MAX1586
	tristate "Maxim 1586/1587 voltage regulator"
	depends on I2C
	help
	  This driver controls a Maxim 1586 or 1587 voltage output
	  regulator via I2C bus. The provided regulator is suitable
	  for PXA27x chips to control VCC_CORE and VCC_USIM voltages.

327 328 329
config REGULATOR_MAX8649
	tristate "Maxim 8649 voltage regulator"
	depends on I2C
330
	select REGMAP_I2C
331 332 333 334
	help
	  This driver controls a Maxim 8649 voltage output regulator via
	  I2C bus.

335 336 337 338 339 340 341
config REGULATOR_MAX8660
	tristate "Maxim 8660/8661 voltage regulator"
	depends on I2C
	help
	  This driver controls a Maxim 8660/8661 voltage output
	  regulator via I2C bus.

G
Gyungoh Yoo 已提交
342 343 344 345 346 347 348 349
config REGULATOR_MAX8907
	tristate "Maxim 8907 voltage regulator"
	depends on MFD_MAX8907
	help
	  This driver controls a Maxim 8907 voltage output regulator
	  via I2C bus. The provided regulator is suitable for Tegra
	  chip to control Step-Down DC-DC and LDOs.

H
Haojian Zhuang 已提交
350 351 352 353 354 355
config REGULATOR_MAX8925
	tristate "Maxim MAX8925 Power Management IC"
	depends on MFD_MAX8925
	help
	  Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.

M
MyungJoo Ham 已提交
356 357 358 359 360 361 362 363
config REGULATOR_MAX8952
	tristate "Maxim MAX8952 Power Management IC"
	depends on I2C
	help
	  This driver controls a Maxim 8952 voltage output regulator
	  via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
	  modes ranging from 0.77V to 1.40V by 0.01V steps.

364 365 366 367 368 369 370 371 372 373
config REGULATOR_MAX8973
	tristate "Maxim MAX8973 voltage regulator "
	depends on I2C
	select REGMAP_I2C
	help
	  The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
	  switching regulator delievers up to 9A of output current. Each
	  phase operates at a 2MHz fixed frequency with a 120 deg shift
	  from the adjacent phase, allowing the use of small magnetic component.

M
MyungJoo Ham 已提交
374 375 376 377 378 379 380 381 382
config REGULATOR_MAX8997
	tristate "Maxim 8997/8966 regulator"
	depends on MFD_MAX8997
	help
	  This driver controls a Maxim 8997/8966 regulator
	  via I2C bus. The provided regulator is suitable for S5PC110,
	  S5PV210, and Exynos-4 chips to control VCC_CORE and
	  VCC_USIM voltages.

383 384
config REGULATOR_MAX8998
	tristate "Maxim 8998 voltage regulator"
385
	depends on MFD_MAX8998
386 387 388 389 390
	help
	  This driver controls a Maxim 8998 voltage output regulator
	  via I2C bus. The provided regulator is suitable for S3C6410
	  and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.

391 392 393 394 395 396 397 398
config REGULATOR_MAX77686
	tristate "Maxim 77686 regulator"
	depends on MFD_MAX77686
	help
	  This driver controls a Maxim 77686 regulator
	  via I2C bus. The provided regulator is suitable for
	  Exynos-4 chips to control VARM and VINT voltages.

399 400 401 402 403 404 405 406 407
config REGULATOR_MAX77693
	tristate "Maxim MAX77693 regulator"
	depends on MFD_MAX77693
	help
	  This driver controls a Maxim 77693 regulator via I2C bus.
	  The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
	  and one current regulator 'CHARGER'. This is suitable for
	  Exynos-4x12 chips.

408 409 410 411 412 413 414 415 416
config REGULATOR_MAX77802
	tristate "Maxim 77802 regulator"
	depends on MFD_MAX77686
	help
	  This driver controls a Maxim 77802 regulator
	  via I2C bus. The provided regulator is suitable for
	  Exynos5420/Exynos5800 SoCs to control various voltages.
	  It includes support for control of voltage and ramp speed.

M
Mark Brown 已提交
417 418
config REGULATOR_MC13XXX_CORE
	tristate
B
Balaji Rao 已提交
419

M
Mark Brown 已提交
420 421
config REGULATOR_MC13783
	tristate "Freescale MC13783 regulator driver"
422
	depends on MFD_MC13XXX
M
Mark Brown 已提交
423
	select REGULATOR_MC13XXX_CORE
424
	help
M
Mark Brown 已提交
425 426
	  Say y here to support the regulators found on the Freescale MC13783
	  PMIC.
427

M
Mark Brown 已提交
428 429 430 431
config REGULATOR_MC13892
	tristate "Freescale MC13892 regulator driver"
	depends on MFD_MC13XXX
	select REGULATOR_MC13XXX_CORE
A
Axel Lin 已提交
432
	help
M
Mark Brown 已提交
433 434
	  Say y here to support the regulators found on the Freescale MC13892
	  PMIC.
A
Axel Lin 已提交
435

M
Mark Brown 已提交
436 437 438
config REGULATOR_PALMAS
	tristate "TI Palmas PMIC Regulators"
	depends on MFD_PALMAS
439
	help
M
Mark Brown 已提交
440 441 442
	  If you wish to control the regulators on the Palmas series of
	  chips say Y here. This will enable support for all the software
	  controllable SMPS/LDO regulators.
443

M
Mark Brown 已提交
444 445 446
	  The regulators available on Palmas series chips vary depending
	  on the muxing. This is handled automatically in the driver by
	  reading the mux info from OTP.
447

448 449 450 451 452 453 454 455 456
config REGULATOR_PBIAS
	tristate "PBIAS OMAP regulator driver"
	depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON
	help
	 Say y here to support pbias regulator for mmc1:SD card i/o
	 on OMAP SoCs.
	 This driver provides support for OMAP pbias modelled
	 regulators.

M
Mark Brown 已提交
457 458 459
config REGULATOR_PCAP
	tristate "Motorola PCAP2 regulator driver"
	depends on EZX_PCAP
460
	help
M
Mark Brown 已提交
461 462
	 This driver provides support for the voltage regulators of the
	 PCAP2 PMIC.
463

464 465
config REGULATOR_PCF50633
	tristate "NXP PCF50633 regulator driver"
466
	depends on MFD_PCF50633
467
	help
468 469
	 Say Y here to support the voltage regulators and convertors
	 on PCF50633
470

471
config REGULATOR_PFUZE100
472
	tristate "Freescale PFUZE100/PFUZE200 regulator driver"
473
	depends on I2C
474
	select REGMAP_I2C
475
	help
476 477
	  Say y here to support the regulators found on the Freescale
	  PFUZE100/PFUZE200 PMIC.
478

479 480 481 482 483 484 485
config REGULATOR_PWM
	tristate "PWM voltage regulator"
	depends on PWM
	help
	  This driver supports PWM controlled voltage regulators. PWM
	  duty cycle can increase or decrease the voltage.

486 487 488 489 490 491 492 493 494 495 496 497
config REGULATOR_QCOM_RPM
	tristate "Qualcomm RPM regulator driver"
	depends on MFD_QCOM_RPM
	help
	  If you say yes to this option, support will be included for the
	  regulators exposed by the Resource Power Manager found in Qualcomm
	  8660, 8960 and 8064 based devices.

	  Say M here if you want to include support for the regulators on the
	  Qualcomm RPM as a module. The module will be named
	  "qcom_rpm-regulator".

498 499 500 501 502 503 504 505 506 507
config REGULATOR_RC5T583
	tristate "RICOH RC5T583 Power regulators"
	depends on MFD_RC5T583
	help
	  Select this option to enable the power regulator of RICOH
	  PMIC RC5T583.
	  This driver supports the control of different power rails of device
	  through regulator interface. The device supports multiple DCDC/LDO
	  outputs which can be controlled by i2c communication.

508 509 510 511 512 513 514 515 516 517
config REGULATOR_RK808
	tristate "Rockchip RK808 Power regulators"
	depends on MFD_RK808
	help
	  Select this option to enable the power regulator of ROCKCHIP
	  PMIC RK808.
	  This driver supports the control of different power rails of device
	  through regulator interface. The device supports multiple DCDC/LDO
	  outputs which can be controlled by i2c communication.

518 519 520 521 522 523
config REGULATOR_RN5T618
	tristate "Ricoh RN5T618 voltage regulators"
	depends on MFD_RN5T618
	help
	  Say y here to support the regulators found on Ricoh RN5T618 PMIC.

524 525 526 527 528 529 530
config REGULATOR_S2MPA01
	tristate "Samsung S2MPA01 voltage regulator"
	depends on MFD_SEC_CORE
	help
	 This driver controls Samsung S2MPA01 voltage output regulator
	 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.

531
config REGULATOR_S2MPS11
532
	tristate "Samsung S2MPS11/S2MPS14/S2MPU02 voltage regulator"
533 534
	depends on MFD_SEC_CORE
	help
535
	 This driver supports a Samsung S2MPS11/S2MPS14/S2MPU02 voltage output
536 537 538
	 regulator via I2C bus. The chip is comprised of high efficient Buck
	 converters including Dual-Phase Buck converter, Buck-Boost converter,
	 various LDOs.
539

540 541
config REGULATOR_S5M8767
	tristate "Samsung S5M8767A voltage regulator"
542
	depends on MFD_SEC_CORE
Y
Yong Shen 已提交
543
	help
544 545 546
	 This driver supports a Samsung S5M8767A voltage output regulator
	 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
	 supports DVS mode with 8bits of output voltage control.
Y
Yong Shen 已提交
547

548 549 550
config REGULATOR_SKY81452
	tristate "Skyworks Solutions SKY81452 voltage regulator"
	depends on SKY81452
551
	help
552 553 554 555 556 557
	  This driver supports Skyworks SKY81452 voltage output regulator
	  via I2C bus. SKY81452 has one voltage linear regulator can be
	  programmed from 4.5V to 20V.

	  This driver can also be built as a module. If so, the module
	  will be called sky81452-regulator.
558

M
Mark Brown 已提交
559
config REGULATOR_TI_ABB
560
	tristate "TI Adaptive Body Bias on-chip LDO"
M
Mark Brown 已提交
561
	depends on ARCH_OMAP
562
	help
M
Mark Brown 已提交
563 564 565 566 567
	  Select this option to support Texas Instruments' on-chip Adaptive Body
	  Bias (ABB) LDO regulators. It is recommended that this option be
	  enabled on required TI SoC. Certain Operating Performance Points
	  on TI SoCs may be unstable without enabling this as it provides
	  device specific optimized bias to allow/optimize functionality.
568

569 570 571 572 573 574 575 576
config REGULATOR_STW481X_VMMC
	bool "ST Microelectronics STW481X VMMC regulator"
	depends on MFD_STW481X
	default y if MFD_STW481X
	help
	  This driver supports the internal VMMC regulator in the STw481x
	  PMIC chips.

577 578 579 580 581 582
config REGULATOR_TPS51632
	tristate "TI TPS51632 Power Regulator"
	depends on I2C
	select REGMAP_I2C
	help
	  This driver supports TPS51632 voltage regulator chip.
583
	  The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
584 585 586 587
	  with Serial VID control and DVFS.
	  The voltage output can be configure through I2C interface or PWM
	  interface.

588 589 590 591 592 593 594 595 596
config REGULATOR_TPS6105X
	tristate "TI TPS6105X Power regulators"
	depends on TPS6105X
	default y if TPS6105X
	help
	  This driver supports TPS61050/TPS61052 voltage regulator chips.
	  It is a single boost converter primarily for white LEDs and
	  audio amplifiers.

597
config REGULATOR_TPS62360
598
	tristate "TI TPS6236x Power Regulator"
599 600 601
	depends on I2C
	select REGMAP_I2C
	help
602
	  This driver supports TPS6236x voltage regulator chip. This
603 604 605 606
	  regulator is meant for processor core supply. This chip is
	  high-frequency synchronous step down dc-dc converter optimized
	  for battery-powered portable applications.

607 608 609
config REGULATOR_TPS65023
	tristate "TI TPS65023 Power regulators"
	depends on I2C
610
	select REGMAP_I2C
611 612 613 614 615 616 617 618 619 620 621 622 623
	help
	  This driver supports TPS65023 voltage regulator chips. TPS65023 provides
	  three step-down converters and two general-purpose LDO voltage regulators.
	  It supports TI's software based Class-2 SmartReflex implementation.

config REGULATOR_TPS6507X
	tristate "TI TPS6507X Power regulators"
	depends on I2C
	help
	  This driver supports TPS6507X voltage regulator chips. TPS6507X provides
	  three step-down converters and two general-purpose LDO voltage regulators.
	  It supports TI's software based Class-2 SmartReflex implementation.

624 625 626 627 628 629 630
config REGULATOR_TPS65090
	tristate "TI TPS65090 Power regulator"
	depends on MFD_TPS65090
	help
	  This driver provides support for the voltage regulators on the
	  TI TPS65090 PMIC.

631 632 633
config REGULATOR_TPS65217
	tristate "TI TPS65217 Power regulators"
	depends on MFD_TPS65217
M
Margarita Olaya 已提交
634
	help
635 636 637 638
	  This driver supports TPS65217 voltage regulator chips. TPS65217
	  provides three step-down converters and four general-purpose LDO
	  voltage regulators. It supports software based voltage control
	  for different voltage domains
M
Margarita Olaya 已提交
639

640 641
config REGULATOR_TPS65218
	tristate "TI TPS65218 Power regulators"
642
	depends on MFD_TPS65218 && OF
643 644 645 646 647 648
	help
	  This driver supports TPS65218 voltage regulator chips. TPS65218
	  provides six step-down converters and one general-purpose LDO
	  voltage regulators. It supports software based voltage control
	  for different voltage domains

649 650 651
config REGULATOR_TPS6524X
	tristate "TI TPS6524X Power regulators"
	depends on SPI
652
	help
653 654 655 656 657
	  This driver supports TPS6524X voltage regulator chips. TPS6524X
	  provides three step-down converters and two general-purpose LDO
	  voltage regulators.  This device is interfaced using a customized
	  serial interface currently supported on the sequencer serial
	  port controller.
658

659 660 661
config REGULATOR_TPS6586X
	tristate "TI TPS6586X Power regulators"
	depends on MFD_TPS6586X
662
	help
663
	  This driver supports TPS6586X voltage regulator chips.
664

665
config REGULATOR_TPS65910
666
	tristate "TI TPS65910/TPS65911 Power Regulators"
667
	depends on MFD_TPS65910
668
	help
669
	  This driver supports TPS65910/TPS65911 voltage regulator chips.
670

671 672 673
config REGULATOR_TPS65912
	tristate "TI TPS65912 Power regulator"
	depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
674
	help
675
	    This driver supports TPS65912 voltage regulator chip.
676

677 678 679 680 681 682 683 684 685
config REGULATOR_TPS80031
	tristate "TI TPS80031/TPS80032 power regualtor driver"
	depends on MFD_TPS80031
	help
	  TPS80031/ TPS80032 Fully Integrated Power Management with Power
	  Path and Battery Charger. It has 5 configurable step-down
	  converters, 11 general purpose LDOs, VBUS generator and digital
	  output to control regulators.

686
config REGULATOR_TWL4030
687
	tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
688
	depends on TWL4030_CORE
689
	help
690 691
	  This driver supports the voltage regulators provided by
	  this family of companion chips.
692

693 694 695 696 697 698 699
config REGULATOR_VEXPRESS
	tristate "Versatile Express regulators"
	depends on VEXPRESS_CONFIG
	help
	  This driver provides support for voltage regulators available
	  on the ARM Ltd's Versatile Express platform.

700 701 702
config REGULATOR_WM831X
	tristate "Wolfson Microelectronics WM831x PMIC regulators"
	depends on MFD_WM831X
703
	help
704 705
	  Support the voltage and current regulators of the WM831x series
	  of PMIC devices.
706

707 708 709
config REGULATOR_WM8350
	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
	depends on MFD_WM8350
710
	help
711
	  This driver provides support for the voltage and current regulators
712
	  of the WM8350 AudioPlus PMIC.
713

714 715 716
config REGULATOR_WM8400
	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
	depends on MFD_WM8400
717
	help
718 719
	  This driver provides support for the voltage regulators of the
	  WM8400 AudioPlus PMIC.
720

721 722 723
config REGULATOR_WM8994
	tristate "Wolfson Microelectronics WM8994 CODEC"
	depends on MFD_WM8994
724
	help
725 726
	  This driver provides support for the voltage regulators on the
	  WM8994 CODEC.
727

728
endif
729