Skip to content

R
rt-thread

wwsmg1 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 1
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 dc107998 编写于 作者: wuyangyong's avatar wuyangyong
浏览文件
操作

update STM32F10x_StdPeriph_Lib_V3.5.0 

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1511 bbd45198-f89e-11dd-88c7-29a3b14d5316
上级 4f963844
展开全部 隐藏空白更改
内联 并排
Showing with 7119 addition and 4875 deletion
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_cl.s
浏览文件 @ dc107998
/**
******************************************************************************
* @file startup_stm32f10x_cl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x Connectivity line Devices vector table for Atollic
* toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR
* address.
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_cl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Connectivity line Devices vector table for Atollic
* toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR
* address.
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -469,4 +470,4 @@ g_pfnVectors:
.weak OTG_FS_IRQHandler
.thumb_set OTG_FS_IRQHandler ,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_hd.s
浏览文件 @ dc107998
/**
******************************************************************************
* @file startup_stm32f10x_hd.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x High Density Devices vector table for Atollic toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address,
* - Configure the clock system
* - Configure external SRAM mounted on STM3210E-EVAL board
* to be used as data memory (optional, to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_hd.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x High Density Devices vector table for Atollic toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address,
* - Configure the clock system
* - Configure external SRAM mounted on STM3210E-EVAL board
* to be used as data memory (optional, to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -465,4 +466,4 @@ g_pfnVectors:
.weak DMA2_Channel4_5_IRQHandler
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_hd_vl.s
浏览文件 @ dc107998
/**
******************************************************************************
* @file startup_stm32f10x_hd_vl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x High Density Value Line Devices vector table for Atollic toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Configure external SRAM mounted on STM32100E-EVAL board
* to be used as data memory (optional, to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_hd_vl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x High Density Value Line Devices vector table for Atollic
* toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Configure external SRAM mounted on STM32100E-EVAL board
* to be used as data memory (optional, to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -191,7 +193,7 @@ g_pfnVectors:
.word TIM14_IRQHandler
.word 0
.word 0
.word FSMC_IRQHandler
.word 0
.word 0
.word TIM5_IRQHandler
.word SPI3_IRQHandler
......@@ -412,9 +414,6 @@ g_pfnVectors:
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak FSMC_IRQHandler
.thumb_set FSMC_IRQHandler,Default_Handler
.weak TIM5_IRQHandler
.thumb_set TIM5_IRQHandler,Default_Handler
......@@ -448,5 +447,5 @@ g_pfnVectors:
.weak DMA2_Channel5_IRQHandler
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_ld.s
浏览文件 @ dc107998
/**
******************************************************************************
* @file startup_stm32f10x_ld.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x Low Density Devices vector table for Atollic toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address.
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_ld.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Low Density Devices vector table for Atollic toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address.
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -343,4 +344,4 @@ g_pfnVectors:
.weak USBWakeUp_IRQHandler
.thumb_set USBWakeUp_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_ld_vl.s
浏览文件 @ dc107998
/**
******************************************************************************
* @file startup_stm32f10x_ld_vl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x Low Density Value Line Devices vector table for Atollic toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_ld_vl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Low Density Value Line Devices vector table for Atollic toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -387,5 +388,5 @@ g_pfnVectors:
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_md.s
浏览文件 @ dc107998
/**
******************************************************************************
* @file startup_stm32f10x_md.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x Medium Density Devices vector table for Atollic toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_md.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Medium Density Devices vector table for Atollic toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -358,5 +359,5 @@ g_pfnVectors:
.weak USBWakeUp_IRQHandler
.thumb_set USBWakeUp_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_md_vl.s
浏览文件 @ dc107998
/**
******************************************************************************
* @file startup_stm32f10x_md_vl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x Medium Density Value Line Devices vector table for Atollic toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_md_vl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Medium Density Value Line Devices vector table for Atollic
* toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -402,5 +404,5 @@ g_pfnVectors:
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_xl.s
浏览文件 @ dc107998
/**
******************************************************************************
* @file startup_stm32f10x_xl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x XL-Density Devices vector table for TrueSTUDIO toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system and the external SRAM mounted on
* STM3210E-EVAL board to be used as data memory (optional,
* to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_xl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x XL-Density Devices vector table for TrueSTUDIO toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system and the external SRAM mounted on
* STM3210E-EVAL board to be used as data memory (optional,
* to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -463,4 +464,4 @@ g_pfnVectors:
.weak DMA2_Channel4_5_IRQHandler
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_cl.s
浏览文件 @ dc107998
;******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_cl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Connectivity line devices vector table for MDK-ARM
;* toolchain.
;* This module performs:
......@@ -365,4 +365,4 @@ __user_initial_stackheap
END
;******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE*****
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_hd.s
浏览文件 @ dc107998
;******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_hd.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x High Density Devices vector table for MDK-ARM
;* toolchain.
;* This module performs:
......@@ -355,4 +355,4 @@ __user_initial_stackheap
END
;******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE*****
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_hd_vl.s
浏览文件 @ dc107998
;******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_hd_vl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x High Density Value Line Devices vector table
;* for MDK-ARM toolchain.
;* This module performs:
......@@ -126,7 +126,7 @@ __Vectors DCD __initial_sp ; Top of Stack
DCD TIM14_IRQHandler ; TIM14
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD FSMC_IRQHandler ; FSMC
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD TIM5_IRQHandler ; TIM5
DCD SPI3_IRQHandler ; SPI3
......@@ -244,7 +244,6 @@ Default_Handler PROC
EXPORT TIM12_IRQHandler [WEAK]
EXPORT TIM13_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT FSMC_IRQHandler [WEAK]
EXPORT TIM5_IRQHandler [WEAK]
EXPORT SPI3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
......@@ -299,7 +298,6 @@ CEC_IRQHandler
TIM12_IRQHandler
TIM13_IRQHandler
TIM14_IRQHandler
FSMC_IRQHandler
TIM5_IRQHandler
SPI3_IRQHandler
UART4_IRQHandler
......@@ -345,4 +343,4 @@ __user_initial_stackheap
END
;******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE*****
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_ld.s
浏览文件 @ dc107998
;******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_ld.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Low Density Devices vector table for MDK-ARM
;* toolchain.
;* This module performs:
......@@ -294,4 +294,4 @@ __user_initial_stackheap
END
;******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE*****
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_ld_vl.s
浏览文件 @ dc107998
;******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_ld_vl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Low Density Value Line Devices vector table
;* for MDK-ARM toolchain.
;* This module performs:
......@@ -301,4 +301,4 @@ __user_initial_stackheap
END
;******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE*****
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_md.s
浏览文件 @ dc107998
;******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_md.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Medium Density Devices vector table for MDK-ARM
;* toolchain.
;* This module performs:
......@@ -304,4 +304,4 @@ __user_initial_stackheap
END
;******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE*****
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_md_vl.s
浏览文件 @ dc107998
;******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_md_vl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Medium Density Value Line Devices vector table
;* for MDK-ARM toolchain.
;* This module performs:
......@@ -312,4 +312,4 @@ __user_initial_stackheap
END
;******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE*****
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_xl.s
浏览文件 @ dc107998
;******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_xl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x XL-Density Devices vector table for MDK-ARM
;* toolchain.
;* This module performs:
......@@ -355,4 +355,4 @@ __user_initial_stackheap
END
;******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE*****
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_cl.s
浏览文件 @ dc107998
/**
******************************************************************************
* @file startup_stm32f10x_cl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x Connectivity line Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR
* address.
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_cl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Connectivity line Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR
* address.
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -464,4 +465,4 @@ g_pfnVectors:
.weak OTG_FS_IRQHandler
.thumb_set OTG_FS_IRQHandler ,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_hd.s
浏览文件 @ dc107998
/**
******************************************************************************
* @file startup_stm32f10x_hd.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x High Density Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system and the external SRAM mounted on
* STM3210E-EVAL board to be used as data memory (optional,
* to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_hd.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x High Density Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system and the external SRAM mounted on
* STM3210E-EVAL board to be used as data memory (optional,
* to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -461,4 +462,4 @@ g_pfnVectors:
.weak DMA2_Channel4_5_IRQHandler
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_hd_vl.s
浏览文件 @ dc107998
/**
******************************************************************************
* @file startup_stm32f10x_hd_vl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x High Density Value Line Devices vector table for RIDE7
* toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system and the external SRAM mounted on
* STM32100E-EVAL board to be used as data memory (optional,
* to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_hd_vl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x High Density Value Line Devices vector table for RIDE7
* toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system and the external SRAM mounted on
* STM32100E-EVAL board to be used as data memory (optional,
* to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -187,7 +188,7 @@ g_pfnVectors:
.word TIM14_IRQHandler
.word 0
.word 0
.word FSMC_IRQHandler
.word 0
.word 0
.word TIM5_IRQHandler
.word SPI3_IRQHandler
......@@ -405,9 +406,6 @@ g_pfnVectors:
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak FSMC_IRQHandler
.thumb_set FSMC_IRQHandler,Default_Handler
.weak TIM5_IRQHandler
.thumb_set TIM5_IRQHandler,Default_Handler
......@@ -441,4 +439,4 @@ g_pfnVectors:
.weak DMA2_Channel5_IRQHandler
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_ld.s
浏览文件 @ dc107998
/**
******************************************************************************
* @file startup_stm32f10x_ld.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x Low Density Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_ld.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Low Density Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -339,4 +340,4 @@ g_pfnVectors:
.weak USBWakeUp_IRQHandler
.thumb_set USBWakeUp_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_ld_vl.s
浏览文件 @ dc107998
/**
******************************************************************************
* @file startup_stm32f10x_ld_vl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x Low Density Value Line Devices vector table for RIDE7
* toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_ld_vl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Low Density Value Line Devices vector table for RIDE7
* toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -379,4 +380,4 @@ g_pfnVectors:
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_md.s
浏览文件 @ dc107998
/**
******************************************************************************
* @file startup_stm32f10x_md.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x Medium Density Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_md.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Medium Density Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -354,4 +355,4 @@ g_pfnVectors:
.weak USBWakeUp_IRQHandler
.thumb_set USBWakeUp_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_md_vl.s
浏览文件 @ dc107998
/**
******************************************************************************
* @file startup_stm32f10x_md_vl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x Medium Density Value Line Devices vector table for RIDE7
* toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_md_vl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Medium Density Value Line Devices vector table for RIDE7
* toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -395,4 +396,4 @@ g_pfnVectors:
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_xl.s
浏览文件 @ dc107998
/**
******************************************************************************
* @file startup_stm32f10x_xl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x XL-Density Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system and the external SRAM mounted on
* STM3210E-EVAL board to be used as data memory (optional,
* to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_xl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x XL-Density Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system and the external SRAM mounted on
* STM3210E-EVAL board to be used as data memory (optional,
* to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -461,4 +462,4 @@ g_pfnVectors:
.weak DMA2_Channel4_5_IRQHandler
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_cl.s
浏览文件 @ dc107998
;/******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics *******************
;* File Name : startup_stm32f10x_cl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Connectivity line devices vector table for
;* EWARM5.x toolchain.
;* EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Configure the clock system
......@@ -20,7 +20,7 @@
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************/
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
......@@ -504,4 +504,4 @@ OTG_FS_IRQHandler
B OTG_FS_IRQHandler
END
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_hd.s
浏览文件 @ dc107998
;/******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_hd.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Description : STM32F10x High Density Devices vector table for EWARM5.x
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x High Density Devices vector table for EWARM
;* toolchain.
;* This module performs:
;* - Set the initial SP
......@@ -21,7 +21,7 @@
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************/
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
......@@ -493,4 +493,4 @@ DMA2_Channel4_5_IRQHandler
END
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_hd_vl.s
浏览文件 @ dc107998
;/******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_hd_vl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x High Density Value Line Devices vector table
;* for EWARM5.x toolchain.
;* for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Configure the clock system and the external SRAM
......@@ -22,7 +22,7 @@
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************/
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
......@@ -119,7 +119,7 @@ __vector_table
DCD TIM14_IRQHandler ; TIM14
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD FSMC_IRQHandler ; FSMC
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD TIM5_IRQHandler ; TIM5
DCD SPI3_IRQHandler ; SPI3
......@@ -402,11 +402,6 @@ TIM13_IRQHandler
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK FSMC_IRQHandler
SECTION .text:CODE:REORDER(1)
FSMC_IRQHandler
B FSMC_IRQHandler
PUBWEAK TIM5_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM5_IRQHandler
......@@ -463,4 +458,4 @@ DMA2_Channel5_IRQHandler
B DMA2_Channel5_IRQHandler
END
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_ld.s
浏览文件 @ dc107998
;/******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_ld.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Description : STM32F10x Low Density Devices vector table for EWARM5.x
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Low Density Devices vector table for EWARM
;* toolchain.
;* This module performs:
;* - Set the initial SP
......@@ -20,7 +20,7 @@
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************/
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
......@@ -363,4 +363,4 @@ USBWakeUp_IRQHandler
B USBWakeUp_IRQHandler
END
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_ld_vl.s
浏览文件 @ dc107998
;/******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_ld_vl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Low Density Value Line Devices vector table
;* for EWARM5.x toolchain.
;* for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Configure the clock system
......@@ -20,7 +20,7 @@
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************/
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
......@@ -366,4 +366,4 @@ TIM7_IRQHandler
B TIM7_IRQHandler
END
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_md.s
浏览文件 @ dc107998
;/******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_md.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Medium Density Devices vector table for
;* EWARM5.x toolchain.
;* EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Configure the clock system
......@@ -20,7 +20,7 @@
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************/
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
......@@ -388,4 +388,4 @@ USBWakeUp_IRQHandler
B USBWakeUp_IRQHandler
END
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_md_vl.s
浏览文件 @ dc107998
;/******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_md_vl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Medium Density Value Line Devices vector table
;* for EWARM5.x toolchain.
;* for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Configure the clock system
......@@ -20,7 +20,7 @@
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************/
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
......@@ -391,4 +391,4 @@ TIM7_IRQHandler
B TIM7_IRQHandler
END
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_xl.s
浏览文件 @ dc107998
;/******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_xl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Description : STM32F10x XL-Density Devices vector table for EWARM5.x
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x XL-Density Devices vector table for EWARM
;* toolchain.
;* This module performs:
;* - Set the initial SP
......@@ -21,7 +21,7 @@
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************/
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
......@@ -493,4 +493,4 @@ DMA2_Channel4_5_IRQHandler
END
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.h
浏览文件 @ dc107998
......@@ -2,10 +2,11 @@
******************************************************************************
* @file system_stm32f10x.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Header File.
******************************************************************************
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -14,7 +15,7 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
......@@ -94,4 +95,4 @@ extern void SystemCoreClockUpdate(void);
/**
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/STM32F10x_StdPeriph_Driver/inc/misc.h
浏览文件 @ dc107998
......@@ -2,12 +2,12 @@
******************************************************************************
* @file misc.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the miscellaneous
* firmware library functions (add-on to CMSIS functions).
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __MISC_H
......@@ -216,4 +217,4 @@ void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_adc.h
浏览文件 @ dc107998
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_adc.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the ADC firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_ADC_H
......@@ -479,4 +480,4 @@ void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_bkp.h
浏览文件 @ dc107998
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_bkp.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the BKP firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_BKP_H
......@@ -191,4 +192,4 @@ void BKP_ClearITPendingBit(void);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_cec.h
浏览文件 @ dc107998
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_cec.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the CEC firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_CEC_H
......@@ -101,7 +102,7 @@ typedef struct
*/
/** @defgroup CEC_Own_Addres
/** @defgroup CEC_Own_Address
* @{
*/
#define IS_CEC_ADDRESS(ADDRESS) ((ADDRESS) < 0x10)
......@@ -206,4 +207,4 @@ void CEC_ClearITPendingBit(uint16_t CEC_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_crc.h
浏览文件 @ dc107998
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_crc.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the CRC firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_CRC_H
......@@ -90,4 +91,4 @@ uint8_t CRC_GetIDRegister(void);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dac.h
浏览文件 @ dc107998
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_dac.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the DAC firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_DAC_H
......@@ -200,7 +201,7 @@ typedef struct
* @}
*/
/** @defgroup DAC_data_alignement
/** @defgroup DAC_data_alignment
* @{
*/
......@@ -313,4 +314,4 @@ void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dbgmcu.h
浏览文件 @ dc107998
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_dbgmcu.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the DBGMCU
* firmware library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_DBGMCU_H
......@@ -115,4 +116,4 @@ void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dma.h
浏览文件 @ dc107998
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_dma.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the DMA firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_DMA_H
......@@ -413,10 +414,10 @@ void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState);
void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState);
void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber);
uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx);
FlagStatus DMA_GetFlagStatus(uint32_t DMA_FLAG);
void DMA_ClearFlag(uint32_t DMA_FLAG);
ITStatus DMA_GetITStatus(uint32_t DMA_IT);
void DMA_ClearITPendingBit(uint32_t DMA_IT);
FlagStatus DMA_GetFlagStatus(uint32_t DMAy_FLAG);
void DMA_ClearFlag(uint32_t DMAy_FLAG);
ITStatus DMA_GetITStatus(uint32_t DMAy_IT);
void DMA_ClearITPendingBit(uint32_t DMAy_IT);
#ifdef __cplusplus
}
......@@ -435,4 +436,4 @@ void DMA_ClearITPendingBit(uint32_t DMA_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_exti.h
浏览文件 @ dc107998
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_exti.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the EXTI firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_EXTI_H
......@@ -180,4 +181,4 @@ void EXTI_ClearITPendingBit(uint32_t EXTI_Line);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_flash.h
浏览文件 @ dc107998
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_flash.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the FLASH
* firmware library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_FLASH_H
......@@ -422,4 +423,4 @@ FLASH_Status FLASH_BootConfig(uint16_t FLASH_BOOT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_fsmc.h
浏览文件 @ dc107998
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_fsmc.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the FSMC firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_FSMC_H
......@@ -76,7 +77,7 @@ typedef struct
to the memory before getting the first data.
The value of this parameter depends on the memory type as shown below:
- It must be set to 0 in case of a CRAM
- It is don’t care in asynchronous NOR, SRAM or ROM accesses
- It is don't care in asynchronous NOR, SRAM or ROM accesses
- It may assume a value between 0 and 0xF in NOR Flash memories
with synchronous burst mode enable */
......@@ -729,4 +730,4 @@ void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_gpio.h
浏览文件 @ dc107998
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_gpio.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the GPIO
* firmware library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_GPIO_H
......@@ -195,7 +196,7 @@ typedef enum
#define GPIO_Remap_SWJ_NoJTRST ((uint32_t)0x00300100) /*!< Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST */
#define GPIO_Remap_SWJ_JTAGDisable ((uint32_t)0x00300200) /*!< JTAG-DP Disabled and SW-DP Enabled */
#define GPIO_Remap_SWJ_Disable ((uint32_t)0x00300400) /*!< Full SWJ Disabled (JTAG-DP + SW-DP) */
#define GPIO_Remap_SPI3 ((uint32_t)0x00201000) /*!< SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices) */
#define GPIO_Remap_SPI3 ((uint32_t)0x00201100) /*!< SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices) */
#define GPIO_Remap_TIM2ITR1_PTP_SOF ((uint32_t)0x00202000) /*!< Ethernet PTP output or USB OTG SOF (Start of Frame) connected
to TIM2 Internal Trigger 1 for calibration
(only for Connectivity line devices) */
......@@ -381,4 +382,4 @@ void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_i2c.h
浏览文件 @ dc107998
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_i2c.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the I2C firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_I2C_H
......@@ -190,6 +191,18 @@ typedef struct
* @}
*/
/** @defgroup I2C_NCAK_position
* @{
*/
#define I2C_NACKPosition_Next ((uint16_t)0x0800)
#define I2C_NACKPosition_Current ((uint16_t)0xF7FF)
#define IS_I2C_NACK_POSITION(POSITION) (((POSITION) == I2C_NACKPosition_Next) || \
((POSITION) == I2C_NACKPosition_Current))
/**
* @}
*/
/** @defgroup I2C_interrupts_definition
* @{
*/
......@@ -433,7 +446,7 @@ typedef struct
* the end of the byte transmission. The two events I2C_EVENT_SLAVE_BYTE_TRANSMITTED and
* I2C_EVENT_SLAVE_BYTE_TRANSMITTING are similar. The second one can optionally be
* used when the user software doesn't guarantee the EV3 is managed before the
* current byte end of tranfer.
* current byte end of transfer.
* - EV3_2: When the master sends a NACK in order to tell slave that data transmission
* shall end (before sending the STOP condition). In this case slave has to stop sending
* data bytes and expect a Stop condition on the bus.
......@@ -536,6 +549,7 @@ uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx);
void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction);
uint16_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register);
void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
void I2C_NACKPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_NACKPosition);
void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, uint16_t I2C_SMBusAlert);
void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState);
void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition);
......@@ -577,10 +591,10 @@ void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle);
* @note
* For error management, it is advised to use the following functions:
* - I2C_ITConfig() to configure and enable the error interrupts (I2C_IT_ERR).
* - I2Cx_ER_IRQHandler() which is called when the error interurpt occurs.
* - I2Cx_ER_IRQHandler() which is called when the error interrupt occurs.
* Where x is the peripheral instance (I2C1, I2C2 ...)
* - I2C_GetFlagStatus() or I2C_GetITStatus() to be called into I2Cx_ER_IRQHandler()
* in order to determine which error occured.
* in order to determine which error occurred.
* - I2C_ClearFlag() or I2C_ClearITPendingBit() and/or I2C_SoftwareResetCmd()
* and/or I2C_GenerateStop() in order to clear the error flag and source,
* and return to correct communication status.
......@@ -667,4 +681,4 @@ void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_iwdg.h
浏览文件 @ dc107998
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_iwdg.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the IWDG
* firmware library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_IWDG_H
......@@ -136,4 +137,4 @@ FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_pwr.h
浏览文件 @ dc107998
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_pwr.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the PWR firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_PWR_H
......@@ -152,4 +153,4 @@ void PWR_ClearFlag(uint32_t PWR_FLAG);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rcc.h
浏览文件 @ dc107998
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_rcc.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the RCC firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_RCC_H
......@@ -723,4 +724,4 @@ void RCC_ClearITPendingBit(uint8_t RCC_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rtc.h
浏览文件 @ dc107998
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_rtc.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the RTC firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_RTC_H
......@@ -131,4 +132,4 @@ void RTC_ClearITPendingBit(uint16_t RTC_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_sdio.h
浏览文件 @ dc107998
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_sdio.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the SDIO firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_SDIO_H
......@@ -189,7 +190,7 @@ typedef struct
*/
/** @defgroup SDIO_Interrupt_soucres
/** @defgroup SDIO_Interrupt_sources
* @{
*/
......@@ -527,4 +528,4 @@ void SDIO_ClearITPendingBit(uint32_t SDIO_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_spi.h
浏览文件 @ dc107998
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_spi.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the SPI firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_SPI_H
......@@ -339,7 +340,7 @@ typedef struct
* @}
*/
/** @defgroup SPI_NSS_internal_software_mangement
/** @defgroup SPI_NSS_internal_software_management
* @{
*/
......@@ -483,4 +484,4 @@ void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_tim.h
浏览文件 @ dc107998
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_tim.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the TIM firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_TIM_H
......@@ -44,7 +45,7 @@
/**
* @brief TIM Time Base Init structure definition
* @note This sturcture is used with all TIMx except for TIM6 and TIM7.
* @note This structure is used with all TIMx except for TIM6 and TIM7.
*/
typedef struct
......@@ -132,7 +133,7 @@ typedef struct
/**
* @brief BDTR structure definition
* @note This sturcture is used only with TIM1 and TIM8.
* @note This structure is used only with TIM1 and TIM8.
*/
typedef struct
......@@ -669,42 +670,42 @@ typedef struct
* @{
*/
#define TIM_DMABurstLength_1Byte ((uint16_t)0x0000)
#define TIM_DMABurstLength_2Bytes ((uint16_t)0x0100)
#define TIM_DMABurstLength_3Bytes ((uint16_t)0x0200)
#define TIM_DMABurstLength_4Bytes ((uint16_t)0x0300)
#define TIM_DMABurstLength_5Bytes ((uint16_t)0x0400)
#define TIM_DMABurstLength_6Bytes ((uint16_t)0x0500)
#define TIM_DMABurstLength_7Bytes ((uint16_t)0x0600)
#define TIM_DMABurstLength_8Bytes ((uint16_t)0x0700)
#define TIM_DMABurstLength_9Bytes ((uint16_t)0x0800)
#define TIM_DMABurstLength_10Bytes ((uint16_t)0x0900)
#define TIM_DMABurstLength_11Bytes ((uint16_t)0x0A00)
#define TIM_DMABurstLength_12Bytes ((uint16_t)0x0B00)
#define TIM_DMABurstLength_13Bytes ((uint16_t)0x0C00)
#define TIM_DMABurstLength_14Bytes ((uint16_t)0x0D00)
#define TIM_DMABurstLength_15Bytes ((uint16_t)0x0E00)
#define TIM_DMABurstLength_16Bytes ((uint16_t)0x0F00)
#define TIM_DMABurstLength_17Bytes ((uint16_t)0x1000)
#define TIM_DMABurstLength_18Bytes ((uint16_t)0x1100)
#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABurstLength_1Byte) || \
((LENGTH) == TIM_DMABurstLength_2Bytes) || \
((LENGTH) == TIM_DMABurstLength_3Bytes) || \
((LENGTH) == TIM_DMABurstLength_4Bytes) || \
((LENGTH) == TIM_DMABurstLength_5Bytes) || \
((LENGTH) == TIM_DMABurstLength_6Bytes) || \
((LENGTH) == TIM_DMABurstLength_7Bytes) || \
((LENGTH) == TIM_DMABurstLength_8Bytes) || \
((LENGTH) == TIM_DMABurstLength_9Bytes) || \
((LENGTH) == TIM_DMABurstLength_10Bytes) || \
((LENGTH) == TIM_DMABurstLength_11Bytes) || \
((LENGTH) == TIM_DMABurstLength_12Bytes) || \
((LENGTH) == TIM_DMABurstLength_13Bytes) || \
((LENGTH) == TIM_DMABurstLength_14Bytes) || \
((LENGTH) == TIM_DMABurstLength_15Bytes) || \
((LENGTH) == TIM_DMABurstLength_16Bytes) || \
((LENGTH) == TIM_DMABurstLength_17Bytes) || \
((LENGTH) == TIM_DMABurstLength_18Bytes))
#define TIM_DMABurstLength_1Transfer ((uint16_t)0x0000)
#define TIM_DMABurstLength_2Transfers ((uint16_t)0x0100)
#define TIM_DMABurstLength_3Transfers ((uint16_t)0x0200)
#define TIM_DMABurstLength_4Transfers ((uint16_t)0x0300)
#define TIM_DMABurstLength_5Transfers ((uint16_t)0x0400)
#define TIM_DMABurstLength_6Transfers ((uint16_t)0x0500)
#define TIM_DMABurstLength_7Transfers ((uint16_t)0x0600)
#define TIM_DMABurstLength_8Transfers ((uint16_t)0x0700)
#define TIM_DMABurstLength_9Transfers ((uint16_t)0x0800)
#define TIM_DMABurstLength_10Transfers ((uint16_t)0x0900)
#define TIM_DMABurstLength_11Transfers ((uint16_t)0x0A00)
#define TIM_DMABurstLength_12Transfers ((uint16_t)0x0B00)
#define TIM_DMABurstLength_13Transfers ((uint16_t)0x0C00)
#define TIM_DMABurstLength_14Transfers ((uint16_t)0x0D00)
#define TIM_DMABurstLength_15Transfers ((uint16_t)0x0E00)
#define TIM_DMABurstLength_16Transfers ((uint16_t)0x0F00)
#define TIM_DMABurstLength_17Transfers ((uint16_t)0x1000)
#define TIM_DMABurstLength_18Transfers ((uint16_t)0x1100)
#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABurstLength_1Transfer) || \
((LENGTH) == TIM_DMABurstLength_2Transfers) || \
((LENGTH) == TIM_DMABurstLength_3Transfers) || \
((LENGTH) == TIM_DMABurstLength_4Transfers) || \
((LENGTH) == TIM_DMABurstLength_5Transfers) || \
((LENGTH) == TIM_DMABurstLength_6Transfers) || \
((LENGTH) == TIM_DMABurstLength_7Transfers) || \
((LENGTH) == TIM_DMABurstLength_8Transfers) || \
((LENGTH) == TIM_DMABurstLength_9Transfers) || \
((LENGTH) == TIM_DMABurstLength_10Transfers) || \
((LENGTH) == TIM_DMABurstLength_11Transfers) || \
((LENGTH) == TIM_DMABurstLength_12Transfers) || \
((LENGTH) == TIM_DMABurstLength_13Transfers) || \
((LENGTH) == TIM_DMABurstLength_14Transfers) || \
((LENGTH) == TIM_DMABurstLength_15Transfers) || \
((LENGTH) == TIM_DMABurstLength_16Transfers) || \
((LENGTH) == TIM_DMABurstLength_17Transfers) || \
((LENGTH) == TIM_DMABurstLength_18Transfers))
/**
* @}
*/
......@@ -866,7 +867,7 @@ typedef struct
* @}
*/
/** @defgroup TIM_Ouput_Compare_Preload_State
/** @defgroup TIM_Output_Compare_Preload_State
* @{
*/
......@@ -878,7 +879,7 @@ typedef struct
* @}
*/
/** @defgroup TIM_Ouput_Compare_Fast_State
/** @defgroup TIM_Output_Compare_Fast_State
* @{
*/
......@@ -891,7 +892,7 @@ typedef struct
* @}
*/
/** @defgroup TIM_Ouput_Compare_Clear_State
/** @defgroup TIM_Output_Compare_Clear_State
* @{
*/
......@@ -1008,6 +1009,32 @@ typedef struct
* @}
*/
/** @defgroup TIM_Legacy
* @{
*/
#define TIM_DMABurstLength_1Byte TIM_DMABurstLength_1Transfer
#define TIM_DMABurstLength_2Bytes TIM_DMABurstLength_2Transfers
#define TIM_DMABurstLength_3Bytes TIM_DMABurstLength_3Transfers
#define TIM_DMABurstLength_4Bytes TIM_DMABurstLength_4Transfers
#define TIM_DMABurstLength_5Bytes TIM_DMABurstLength_5Transfers
#define TIM_DMABurstLength_6Bytes TIM_DMABurstLength_6Transfers
#define TIM_DMABurstLength_7Bytes TIM_DMABurstLength_7Transfers
#define TIM_DMABurstLength_8Bytes TIM_DMABurstLength_8Transfers
#define TIM_DMABurstLength_9Bytes TIM_DMABurstLength_9Transfers
#define TIM_DMABurstLength_10Bytes TIM_DMABurstLength_10Transfers
#define TIM_DMABurstLength_11Bytes TIM_DMABurstLength_11Transfers
#define TIM_DMABurstLength_12Bytes TIM_DMABurstLength_12Transfers
#define TIM_DMABurstLength_13Bytes TIM_DMABurstLength_13Transfers
#define TIM_DMABurstLength_14Bytes TIM_DMABurstLength_14Transfers
#define TIM_DMABurstLength_15Bytes TIM_DMABurstLength_15Transfers
#define TIM_DMABurstLength_16Bytes TIM_DMABurstLength_16Transfers
#define TIM_DMABurstLength_17Bytes TIM_DMABurstLength_17Transfers
#define TIM_DMABurstLength_18Bytes TIM_DMABurstLength_18Transfers
/**
* @}
*/
/**
* @}
*/
......@@ -1134,4 +1161,4 @@ void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_usart.h
浏览文件 @ dc107998
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_usart.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the USART
* firmware library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_USART_H
......@@ -408,4 +409,4 @@ void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_wwdg.h
浏览文件 @ dc107998
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_wwdg.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the WWDG firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_WWDG_H
......@@ -111,4 +112,4 @@ void WWDG_ClearFlag(void);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/STM32F10x_StdPeriph_Driver/src/misc.c
浏览文件 @ dc107998
......@@ -2,12 +2,12 @@
******************************************************************************
* @file misc.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the miscellaneous firmware functions (add-on
* to CMSIS functions).
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "misc.h"
......@@ -103,9 +104,9 @@ void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup)
/**
* @brief Initializes the NVIC peripheral according to the specified
* parameters in the NVIC_InitStruct.
* parameters in the NVIC_InitStruct.
* @param NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains
* the configuration information for the specified NVIC peripheral.
* the configuration information for the specified NVIC peripheral.
* @retval None
*/
void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct)
......@@ -148,7 +149,8 @@ void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct)
* This parameter can be one of the following values:
* @arg NVIC_VectTab_RAM
* @arg NVIC_VectTab_FLASH
* @param Offset: Vector Table base offset field. This value must be a multiple of 0x100.
* @param Offset: Vector Table base offset field. This value must be a multiple
* of 0x200.
* @retval None
*/
void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset)
......@@ -220,4 +222,4 @@ void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_adc.c
浏览文件 @ dc107998
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_adc.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the ADC firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,8 +15,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_adc.h"
......@@ -208,10 +209,10 @@ void ADC_DeInit(ADC_TypeDef* ADCx)
/**
* @brief Initializes the ADCx peripheral according to the specified parameters
* in the ADC_InitStruct.
* in the ADC_InitStruct.
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
* @param ADC_InitStruct: pointer to an ADC_InitTypeDef structure that contains
* the configuration information for the specified ADC peripheral.
* the configuration information for the specified ADC peripheral.
* @retval None
*/
void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct)
......@@ -379,7 +380,7 @@ void ADC_ResetCalibration(ADC_TypeDef* ADCx)
{
/* Check the parameters */
assert_param(IS_ADC_ALL_PERIPH(ADCx));
/* Resets the selected ADC calibartion registers */
/* Resets the selected ADC calibration registers */
ADCx->CR2 |= CR2_RSTCAL_Set;
}
......@@ -499,10 +500,10 @@ FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx)
/**
* @brief Configures the discontinuous mode for the selected ADC regular
* group channel.
* group channel.
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
* @param Number: specifies the discontinuous mode regular channel
* count value. This number must be between 1 and 8.
* count value. This number must be between 1 and 8.
* @retval None
*/
void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number)
......@@ -525,11 +526,11 @@ void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number)
/**
* @brief Enables or disables the discontinuous mode on regular group
* channel for the specified ADC
* channel for the specified ADC
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
* @param NewState: new state of the selected ADC discontinuous mode
* on regular group channel.
* This parameter can be: ENABLE or DISABLE.
* on regular group channel.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
......@@ -551,7 +552,7 @@ void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
/**
* @brief Configures for the selected ADC regular channel its corresponding
* rank in the sequencer and its sample time.
* rank in the sequencer and its sample time.
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
* @param ADC_Channel: the ADC channel to configure.
* This parameter can be one of the following values:
......@@ -724,7 +725,7 @@ uint32_t ADC_GetDualModeConversionValue(void)
/**
* @brief Enables or disables the selected ADC automatic injected group
* conversion after regular one.
* conversion after regular one.
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
* @param NewState: new state of the selected ADC auto injected conversion
* This parameter can be: ENABLE or DISABLE.
......@@ -749,10 +750,10 @@ void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
/**
* @brief Enables or disables the discontinuous mode for injected group
* channel for the specified ADC
* channel for the specified ADC
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
* @param NewState: new state of the selected ADC discontinuous mode
* on injected group channel.
* on injected group channel.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
......@@ -813,10 +814,10 @@ void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_External
/**
* @brief Enables or disables the ADCx injected channels conversion through
* external trigger
* external trigger
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
* @param NewState: new state of the selected ADC external trigger start of
* injected conversion.
* injected conversion.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
......@@ -839,7 +840,7 @@ void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState
/**
* @brief Enables or disables the selected ADC start of the injected
* channels conversion.
* channels conversion.
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
* @param NewState: new state of the selected ADC software start injected conversion.
* This parameter can be: ENABLE or DISABLE.
......@@ -891,7 +892,7 @@ FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx)
/**
* @brief Configures for the selected ADC injected channel its corresponding
* rank in the sequencer and its sample time.
* rank in the sequencer and its sample time.
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
* @param ADC_Channel: the ADC channel to configure.
* This parameter can be one of the following values:
......@@ -1065,7 +1066,7 @@ uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedC
/**
* @brief Enables or disables the analog watchdog on single/all regular
* or injected channels
* or injected channels
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
* @param ADC_AnalogWatchdog: the ADC analog watchdog configuration.
* This parameter can be one of the following values:
......@@ -1270,7 +1271,7 @@ ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT)
}
/**
* @brief Clears the ADCxs interrupt pending bits.
* @brief Clears the ADCx's interrupt pending bits.
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
* @param ADC_IT: specifies the ADC interrupt pending bit to clear.
* This parameter can be any combination of the following values:
......@@ -1303,4 +1304,4 @@ void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_bkp.c
浏览文件 @ dc107998
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_bkp.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the BKP firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,8 +15,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_bkp.h"
......@@ -304,4 +305,4 @@ void BKP_ClearITPendingBit(void)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_cec.c
浏览文件 @ dc107998
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_cec.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the CEC firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,8 +15,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_cec.h"
......@@ -277,7 +278,7 @@ void CEC_EndOfMessageCmd(FunctionalState NewState)
* @arg CEC_FLAG_SBE: Start Bit Error
* @arg CEC_FLAG_ACKE: Block Acknowledge Error
* @arg CEC_FLAG_LINE: Line Error
* @arg CEC_FLAG_TBTFE: Tx Block Transfer Finsihed Error
* @arg CEC_FLAG_TBTFE: Tx Block Transfer Finished Error
* @arg CEC_FLAG_TEOM: Tx End Of Message
* @arg CEC_FLAG_TERR: Tx Error
* @arg CEC_FLAG_TBTRF: Tx Byte Transfer Request or Block Transfer Finished
......@@ -429,4 +430,4 @@ void CEC_ClearITPendingBit(uint16_t CEC_IT)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_crc.c
浏览文件 @ dc107998
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_crc.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the CRC firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,8 +15,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_crc.h"
......@@ -156,4 +157,4 @@ uint8_t CRC_GetIDRegister(void)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f10x/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dbgmcu.c
浏览文件 @ dc107998
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_dbgmcu.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the DBGMCU firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,8 +15,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_dbgmcu.h"
......@@ -158,4 +159,4 @@ void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或