- 20 2月, 2019 1 次提交
-
-
由 A C SREEDHAR REDDY 提交于
-
- 18 2月, 2019 2 次提交
-
-
由 Me No Dev 提交于
-
由 lbernstone 提交于
* An example to read high frequency analog data using i2s_adc * Changed random() to use Lemire's method for bounding
-
- 15 2月, 2019 1 次提交
-
-
由 Kevin M Fitzgerald 提交于
-
- 14 2月, 2019 13 次提交
-
-
由 Me No Dev 提交于
* Update IDF to abea9e4c0 * Update esptool * Enable PSRAM for PICO D4 * Enable APP_ROLLBACK_ENABLE
-
由 Nguyen Hong Thiet 提交于
-
由 Jeroen88 提交于
-
由 chuck todd 提交于
@tread-Qualitrol discovered this error.
-
由 HanCheol Cho 提交于
-
由 lbernstone 提交于
-
由 Patrick Van Oosterwijck 提交于
-
由 Stanimir-Petev 提交于
In Board.txt file added board revision submenu to distinguish the different revisions of the same board. By selecting different revision in the Arduino menu different value of the predefined macro will be applied which is used inside the pins_arduino.h file to make different defines and values for the specific revision. In addition to this esp32-poe pin definitions is added ethernet power enable pin and also defined macro: BOARD_HAS_1BIT_SDMMC
-
由 Joey Babcock 提交于
* Clarified comments and debug messages Made debug messages and comments easier to understand/grammatical fixes * few more fixes
-
由 boarchuz 提交于
* Add timeout to WiFiClient.connect() * Changed default handling
-
由 Verkehrsrot 提交于
* Board T-Beam: Update pins_arduino.h DAC2 is not wired, only DAC1 is -> corrected LORA pins 27 + 19 are only wired on pcb, but not connected to header -> deleted * Update pins_arduino.h Button and LED added
-
由 zhaoyanbai 提交于
* fix log error code format * remove useless condition in if statement
-
由 Marco G. Maia 提交于
* add missing EEPROM lib to CMakeLists.txt, moved the EEPROM files to proper directory * add missing EEPROM lib to CMakeLists.txt, moved the EEPROM files to proper directory
-
- 27 1月, 2019 1 次提交
-
-
由 me-no-dev 提交于
-
- 23 1月, 2019 1 次提交
-
-
由 zhaoyanbai 提交于
-
- 22 1月, 2019 9 次提交
-
-
由 Neal MIller 提交于
* Webserver fix logging (#1) * Change logging to use esp32-hal-log.h fixes #2355 * adjust log parameter output positions, reduce lines The DEBUG_ESP method used less lines than I originally set `log_v` to use when displaying the details of the received params ("@" and "=" indexes, and File info on a single line)
-
由 HanCheol Cho 提交于
-
由 Tanishq Jasoria 提交于
Executing python2 get.py behind proxy give error "IOError: [Errno socket error] [SSL: UNKNOWN_PROTOCOL] unknown protocol (_ssl.c:590)"
-
由 Matthew Chase Whittemore 提交于
Pin 2 is not found on the [Adafruit docs](https://learn.adafruit.com/adafruit-huzzah32-esp32-feather) for this board and 33 was suggested in #1586 as a fix. I've tried this locally on my board and it is working correctly.
-
由 Otto Winter 提交于
* Fix BananaPi-BIT DAC definition * Update t-beam too
-
由 chuck todd 提交于
* I2C debugging and Log Dump Explaination Create a help file for I2C debugging and interpretation of log dumps * Update i2c_debugging.md version * add formatting, file locations
-
由 lbernstone 提交于
* An example to read high frequency analog data using i2s_adc * HiFreq_ADC.ino
-
由 me-no-dev 提交于
-
由 me-no-dev 提交于
-
- 14 1月, 2019 1 次提交
-
-
- 12 1月, 2019 1 次提交
-
-
由 me-no-dev 提交于
-
- 11 1月, 2019 3 次提交
-
-
由 Me No Dev 提交于
Add download counter for releases
-
由 Me No Dev 提交于
-
由 chuck todd 提交于
The i2c peripheral will hang if a READ request is issued with a zero data length. The peripheral drops into a continuous timeout interrupt response. The STOP command can not be set out to the I2C bus. The SLAVE device correctly ACK'd the address byte, with READ bit set, it has control of the SDA pin. The ESP32 send out the next SCL HIGH pulse but, since the SLAVE is in READ Mode, and the First bit it is sending happened to be a ZERO, the ESP32 cannot send the STOP. When it releases SDA during the SCL HIGH, the pin does not change state. The pin stays low because the SLAVE is outputing a LOW! The ESP32 drops into a perminent WAIT state waiting for SDA to go HIGH (the STOP). **esp32-hal-i2c.c** * add databuff length checks to `i2cRead()` and `i2cWrite()`
-
- 10 1月, 2019 6 次提交
-
-
由 Ivan Kravets 提交于
-
由 Ivan Kravets 提交于
-
由 me-no-dev 提交于
-
由 lbernstone 提交于
-
由 me-no-dev 提交于
-
由 Me No Dev 提交于
* Update IDF to e931fe9 and add esp-face * Fix PIO builds fail because of sketch size * Fix example build failing for Arduino
-
- 09 1月, 2019 1 次提交
-
-
由 dragon-engineer 提交于
* Added ESP32 FM DevKit * Added ESP32 FM DevKit variant Fixed pin definitions for unused pins.
-