Skip to content

T
TencentOS Tiny

不穿格子衫的农民 / TencentOS Tiny

通知 3
Star 0
Fork 0
T
TencentOS Tiny

前往新版Gitcode，体验更适合开发者的 AI 搜索 >>

提交 620bdd62 编写于 作者: M morixinguan
浏览文件
操作

add at device ml302 && ml302 test demo && modify bearpi bsp bug

上级 04f980f0
展开全部 隐藏空白更改
内联 并排
Showing with 3300 addition and 2126 deletion
board/BearPi_STM32L431RC/BSP/Hardware/BH1750/BH1750.c
浏览文件 @ 620bdd62
......@@ -40,7 +40,7 @@ void BH1750_Start(void)
* 参 数: 无
* 返 回 值: 光强值
***************************************************************/
float BH1750_Convert(void)
__weak float BH1750_Convert(void)
{
BH1750_Start();
HAL_Delay(180);
......
board/BearPi_STM32L431RC/BSP/Hardware/BH1750/bh1750.h
浏览文件 @ 620bdd62
......@@ -30,7 +30,7 @@ typedef struct
void BH1750_Init(void); //IO初始化，
void BH1750_Start(void); //上电，设置清除数据寄存器
//void BH1750_Read(void); //连续的读取内部寄存器数据
float BH1750_Convert(void);
__weak float BH1750_Convert(void);
#endif
......
board/BearPi_STM32L431RC/KEIL/hello_world/DebugConfig/TencentOS_tiny_STM32L431RCTx.dbgconf 已删除 100644 → 0
浏览文件 @ 04f980f0
// File: STM32L43x_44x_45x_46x.dbgconf
// Version: 1.0.0
// Note: refer to STM32L43xxx STM32L44xxx STM32L45xxx STM32L46xxx Reference manual (RM0394)
// refer to STM32L431xx, STM32L432xx, STM32L433xx, STM32L442xx, STM32L443xx, STM32L451xx, STM32L452xx, STM32L462xx datasheets
// <<< Use Configuration Wizard in Context Menu >>>
// <h> Debug MCU configuration register (DBGMCU_CR)
// <o0.2> DBG_STANDBY
// <i> Debug Standby mode
// <i> 0: (FCLK=Off, HCLK=Off) The whole digital part is unpowered.
// <i> 1: (FCLK=On, HCLK=On) The digital part is not unpowered and FCLK and HCLK are provided by the internal RC oscillator which remains active
// <o0.1> DBG_STOP
// <i> Debug Stop mode
// <i> 0: (FCLK=Off, HCLK=Off) In STOP mode, the clock controller disables all clocks (including HCLK and FCLK).
// <i> 1: (FCLK=On, HCLK=On) When entering STOP mode, FCLK and HCLK are provided by the internal RC oscillator which remains active in STOP mode.
// <o0.0> DBG_SLEEP
// <i> Debug Sleep mode
// <i> 0: (FCLK=On, HCLK=Off) In Sleep mode, FCLK is clocked by the system clock as previously configured by the software while HCLK is disabled.
// <i> 1: (FCLK=On, HCLK=On) When entering Sleep mode, HCLK is fed by the same clock that is provided to FCLK (system clock as previously configured by the software).
// </h>
DbgMCU_CR = 0x00000007;
// <h> Debug MCU APB1 freeze register1 (DBGMCU_APB1FZR1)
// <o0.31> DBG_LPTIM1_STOP
// <i> LPTIM1 counter stopped when core is halted
// <i> 0: The counter clock of LPTIM1 is fed even if the core is halted
// <i> 1: The counter clock of LPTIM1 is stopped when the core is halted
// <o0.25> DBG_CAN_STOP
// <i> bxCAN1 stopped when core is halted
// <i> 0: Same behavior as in normal mode
// <i> 1: The bxCAN1 receive registers are frozen
// <o0.23> DBG_I2C3_STOP
// <i> I2C3 SMBUS timeout counter stopped when core is halted
// <i> 0: Same behavior as in normal mode
// <i> 1: The I2C3 SMBus timeout is frozen
// <o0.22> DBG_I2C2_STOP
// <i> I2C2 SMBUS timeout counter stopped when core is halted
// <i> 0: Same behavior as in normal mode
// <i> 1: The I2C2 SMBus timeout is frozen
// <o0.21> DBG_I2C1_STOP
// <i> I2C1 SMBUS timeout counter stopped when core is halted
// <i> 0: Same behavior as in normal mode
// <i> 1: The I2C1 SMBus timeout is frozen
// <o0.12> DBG_IWDG_STOP
// <i> Independent watchdog counter stopped when core is halted
// <i> 0: The independent watchdog counter clock continues even if the core is halted
// <i> 1: The independent watchdog counter clock is stopped when the core is halted
// <o0.11> DBG_WWDG_STOP
// <i> Window watchdog counter stopped when core is halted
// <i> 0: The window watchdog counter clock continues even if the core is halted
// <i> 1: The window watchdog counter clock is stopped when the core is halted
// <o0.10> DBG_RTC_STOP
// <i> RTC counter stopped when core is halted
// <i> 0: The clock of the RTC counter is fed even if the core is halted
// <i> 1: The clock of the RTC counter is stopped when the core is halted
// <o0.5> DBG_TIM7_STOP
// <i> TIM7 counter stopped when core is halted
// <i> 0: The counter clock of TIM7 is fed even if the core is halted
// <i> 1: The counter clock of TIM7 is stopped when the core is halted
// <o0.4> DBG_TIM6_STOP
// <i> TIM6 counter stopped when core is halted
// <i> 0: The counter clock of TIM6 is fed even if the core is halted
// <i> 1: The counter clock of TIM6 is stopped when the core is halted
// <o0.0> DBG_TIM2_STOP
// <i> TIM2 counter stopped when core is halted
// <i> 0: The counter clock of TIM2 is fed even if the core is halted
// <i> 1: The counter clock of TIM2 is stopped when the core is halted
// </h>
DbgMCU_APB1_Fz1 = 0x00000000;
// <h> Debug MCU APB1 freeze register 2 (DBGMCU_APB1FZR2)
// <o0.5> DBG_LPTIM2_STOP
// <i> LPTIM2 counter stopped when core is halted
// <i> 0: The counter clock of LPTIM2 is fed even if the core is halted
// <i> 1: The counter clock of LPTIM2 is stopped when the core is halted
// </h>
DbgMCU_APB1_Fz2 = 0x00000000;
// <h> Debug MCU APB2 freeze register (DBGMCU_APB2FZR)
// <o0.17> DBG_TIM16_STOP
// <i> TIM16 counter stopped when core is halted
// <i> 0: The clock of the TIM16 counter is fed even if the core is halted
// <i> 1: The clock of the TIM16 counter is stopped when the core is halted
// <o0.16> DBG_TIM15_STOP
// <i> TIM15 counter stopped when core is halted
// <i> 0: The clock of the TIM15 counter is fed even if the core is halted
// <i> 1: The clock of the TIM15 counter is stopped when the core is halted
// <o0.11> DBG_TIM1_STOP
// <i> TIM1 counter stopped when core is halted
// <i> 0: The clock of the TIM1 counter is fed even if the core is halted
// <i> 1: The clock of the TIM1 counter is stopped when the core is halted
// </h>
DbgMCU_APB2_Fz = 0x00000000;
// </h>
// <<< end of configuration section >>>
\ No newline at end of file
board/BearPi_STM32L431RC/KEIL/hello_world/RTE/_TencentOS_tiny/RTE_Components.h 已删除 100644 → 0
浏览文件 @ 04f980f0
/*
* Auto generated Run-Time-Environment Component Configuration File
* *** Do not modify ! ***
*
* Project: 'BearPi_STM32L31RC'
* Target: 'TencentOS_tiny'
*/
#ifndef RTE_COMPONENTS_H
#define RTE_COMPONENTS_H
/*
* Define the Device Header File:
*/
#define CMSIS_device_header "stm32l4xx.h"
#endif /* RTE_COMPONENTS_H */
board/BearPi_STM32L431RC/KEIL/hello_world/obj/TencentOS_tiny.sct 已删除 100644 → 0
浏览文件 @ 04f980f0
; *************************************************************
; *** Scatter-Loading Description File generated by uVision ***
; *************************************************************
LR_IROM1 0x08000000 0x00040000 { ; load region size_region
ER_IROM1 0x08000000 0x00040000 { ; load address = execution address
*.o (RESET, +First)
*(InRoot$$Sections)
.ANY (+RO)
.ANY (+XO)
}
RW_IRAM1 0x20000000 0x00010000 { ; RW data
.ANY (+RW +ZI)
}
}
board/BearPi_STM32L431RC/KEIL/tcp_through_ml302_4g_cat_1_module/startup_stm32l431xx.s 0 → 100644
浏览文件 @ 620bdd62
;********************** COPYRIGHT(c) 2017 STMicroelectronics ******************
;* File Name : startup_stm32l431xx.s
;* Author : MCD Application Team
;* Description : STM32L431xx Ultra Low Power devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M4 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x100
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x100
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window WatchDog
DCD PVD_PVM_IRQHandler ; PVD/PVM1/PVM2/PVM3/PVM4 through EXTI Line detection
DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line0
DCD EXTI1_IRQHandler ; EXTI Line1
DCD EXTI2_IRQHandler ; EXTI Line2
DCD EXTI3_IRQHandler ; EXTI Line3
DCD EXTI4_IRQHandler ; EXTI Line4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
DCD ADC1_IRQHandler ; ADC1
DCD CAN1_TX_IRQHandler ; CAN1 TX
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; External Line[15:10]
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SDMMC1_IRQHandler ; SDMMC1
DCD 0 ; Reserved
DCD SPI3_IRQHandler ; SPI3
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
DCD TIM7_IRQHandler ; TIM7
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3
DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD COMP_IRQHandler ; COMP Interrupt
DCD LPTIM1_IRQHandler ; LP TIM1 interrupt
DCD LPTIM2_IRQHandler ; LP TIM2 interrupt
DCD 0 ; Reserved
DCD DMA2_Channel6_IRQHandler ; DMA2 Channel 6
DCD DMA2_Channel7_IRQHandler ; DMA2 Channel 7
DCD LPUART1_IRQHandler ; LP UART1 interrupt
DCD QUADSPI_IRQHandler ; Quad SPI global interrupt
DCD I2C3_EV_IRQHandler ; I2C3 event
DCD I2C3_ER_IRQHandler ; I2C3 error
DCD SAI1_IRQHandler ; Serial Audio Interface 1 global interrupt
DCD 0 ; Reserved
DCD SWPMI1_IRQHandler ; Serial Wire Interface 1 global interrupt
DCD TSC_IRQHandler ; Touch Sense Controller global interrupt
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD RNG_IRQHandler ; RNG global interrupt
DCD FPU_IRQHandler ; FPU
DCD CRS_IRQHandler ; CRS interrupt
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_PVM_IRQHandler [WEAK]
EXPORT TAMP_STAMP_IRQHandler [WEAK]
EXPORT RTC_WKUP_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_IRQHandler [WEAK]
EXPORT EXTI1_IRQHandler [WEAK]
EXPORT EXTI2_IRQHandler [WEAK]
EXPORT EXTI3_IRQHandler [WEAK]
EXPORT EXTI4_IRQHandler [WEAK]
EXPORT DMA1_Channel1_IRQHandler [WEAK]
EXPORT DMA1_Channel2_IRQHandler [WEAK]
EXPORT DMA1_Channel3_IRQHandler [WEAK]
EXPORT DMA1_Channel4_IRQHandler [WEAK]
EXPORT DMA1_Channel5_IRQHandler [WEAK]
EXPORT DMA1_Channel6_IRQHandler [WEAK]
EXPORT DMA1_Channel7_IRQHandler [WEAK]
EXPORT ADC1_IRQHandler [WEAK]
EXPORT CAN1_TX_IRQHandler [WEAK]
EXPORT CAN1_RX0_IRQHandler [WEAK]
EXPORT CAN1_RX1_IRQHandler [WEAK]
EXPORT CAN1_SCE_IRQHandler [WEAK]
EXPORT EXTI9_5_IRQHandler [WEAK]
EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT I2C1_EV_IRQHandler [WEAK]
EXPORT I2C1_ER_IRQHandler [WEAK]
EXPORT I2C2_EV_IRQHandler [WEAK]
EXPORT I2C2_ER_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_IRQHandler [WEAK]
EXPORT EXTI15_10_IRQHandler [WEAK]
EXPORT RTC_Alarm_IRQHandler [WEAK]
EXPORT SDMMC1_IRQHandler [WEAK]
EXPORT SPI3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT DMA2_Channel1_IRQHandler [WEAK]
EXPORT DMA2_Channel2_IRQHandler [WEAK]
EXPORT DMA2_Channel3_IRQHandler [WEAK]
EXPORT DMA2_Channel4_IRQHandler [WEAK]
EXPORT DMA2_Channel5_IRQHandler [WEAK]
EXPORT COMP_IRQHandler [WEAK]
EXPORT LPTIM1_IRQHandler [WEAK]
EXPORT LPTIM2_IRQHandler [WEAK]
EXPORT DMA2_Channel6_IRQHandler [WEAK]
EXPORT DMA2_Channel7_IRQHandler [WEAK]
EXPORT LPUART1_IRQHandler [WEAK]
EXPORT QUADSPI_IRQHandler [WEAK]
EXPORT I2C3_EV_IRQHandler [WEAK]
EXPORT I2C3_ER_IRQHandler [WEAK]
EXPORT SAI1_IRQHandler [WEAK]
EXPORT SWPMI1_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT RNG_IRQHandler [WEAK]
EXPORT FPU_IRQHandler [WEAK]
EXPORT CRS_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_PVM_IRQHandler
TAMP_STAMP_IRQHandler
RTC_WKUP_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_IRQHandler
EXTI1_IRQHandler
EXTI2_IRQHandler
EXTI3_IRQHandler
EXTI4_IRQHandler
DMA1_Channel1_IRQHandler
DMA1_Channel2_IRQHandler
DMA1_Channel3_IRQHandler
DMA1_Channel4_IRQHandler
DMA1_Channel5_IRQHandler
DMA1_Channel6_IRQHandler
DMA1_Channel7_IRQHandler
ADC1_IRQHandler
CAN1_TX_IRQHandler
CAN1_RX0_IRQHandler
CAN1_RX1_IRQHandler
CAN1_SCE_IRQHandler
EXTI9_5_IRQHandler
TIM1_BRK_TIM15_IRQHandler
TIM1_UP_TIM16_IRQHandler
TIM1_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
I2C1_EV_IRQHandler
I2C1_ER_IRQHandler
I2C2_EV_IRQHandler
I2C2_ER_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_IRQHandler
EXTI15_10_IRQHandler
RTC_Alarm_IRQHandler
SDMMC1_IRQHandler
SPI3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
DMA2_Channel1_IRQHandler
DMA2_Channel2_IRQHandler
DMA2_Channel3_IRQHandler
DMA2_Channel4_IRQHandler
DMA2_Channel5_IRQHandler
COMP_IRQHandler
LPTIM1_IRQHandler
LPTIM2_IRQHandler
DMA2_Channel6_IRQHandler
DMA2_Channel7_IRQHandler
LPUART1_IRQHandler
QUADSPI_IRQHandler
I2C3_EV_IRQHandler
I2C3_ER_IRQHandler
SAI1_IRQHandler
SWPMI1_IRQHandler
TSC_IRQHandler
RNG_IRQHandler
FPU_IRQHandler
CRS_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
board/BearPi_STM32L431RC/KEIL/tcp_through_module/BearPi_STM32L31RC.uvoptx
浏览文件 @ 620bdd62
......@@ -10,7 +10,7 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc</tExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
......@@ -1087,6 +1087,18 @@
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>63</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\..\kernel\core\tos_stopwatch.c</PathWithFileName>
<FilenameWithoutPath>tos_stopwatch.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
......@@ -1097,7 +1109,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>63</FileNumber>
<FileNumber>64</FileNumber>
<FileType>2</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
......@@ -1109,7 +1121,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>64</FileNumber>
<FileNumber>65</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
......@@ -1121,7 +1133,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>65</FileNumber>
<FileNumber>66</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
......@@ -1141,7 +1153,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>9</GroupNumber>
<FileNumber>66</FileNumber>
<FileNumber>67</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
......@@ -1161,7 +1173,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>10</GroupNumber>
<FileNumber>67</FileNumber>
<FileNumber>68</FileNumber>
<FileType>5</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
......@@ -1181,7 +1193,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>11</GroupNumber>
<FileNumber>68</FileNumber>
<FileNumber>69</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
......@@ -1201,7 +1213,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>12</GroupNumber>
<FileNumber>69</FileNumber>
<FileNumber>70</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
......@@ -1211,18 +1223,6 @@
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>12</GroupNumber>
<FileNumber>70</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\..\net\at\src\tos_at_utils.c</PathWithFileName>
<FilenameWithoutPath>tos_at_utils.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>12</GroupNumber>
<FileNumber>71</FileNumber>
......
board/BearPi_STM32L431RC/KEIL/tcp_through_module/BearPi_STM32L31RC.uvprojx
浏览文件 @ 620bdd62
......@@ -10,13 +10,13 @@
<TargetName>TencentOS_tiny</TargetName>
<ToolsetNumber>0x4</ToolsetNumber>
<ToolsetName>ARM-ADS</ToolsetName>
<pCCUsed>5060750::V5.06 update 6 (build 750)::ARMCC</pCCUsed>
<pCCUsed>5060960::V5.06 update 7 (build 960)::ARMCC</pCCUsed>
<uAC6>0</uAC6>
<TargetOption>
<TargetCommonOption>
<Device>STM32L431RCTx</Device>
<Vendor>STMicroelectronics</Vendor>
<PackID>Keil.STM32L4xx_DFP.2.2.0</PackID>
<PackID>Keil.STM32L4xx_DFP.2.1.0</PackID>
<PackURL>http://www.keil.com/pack</PackURL>
<Cpu>IRAM(0x20000000-0x2000FFFF) IROM(0x8000000-0x803FFFF) CLOCK(8000000) FPU2 CPUTYPE("Cortex-M4")</Cpu>
<FlashUtilSpec></FlashUtilSpec>
......@@ -185,6 +185,7 @@
<uocXRam>0</uocXRam>
<RvdsVP>2</RvdsVP>
<RvdsMve>0</RvdsMve>
<RvdsCdeCp>0</RvdsCdeCp>
<hadIRAM2>0</hadIRAM2>
<hadIROM2>0</hadIROM2>
<StupSel>8</StupSel>
......@@ -351,7 +352,7 @@
<NoWarn>0</NoWarn>
<uSurpInc>0</uSurpInc>
<useXO>0</useXO>
<uClangAs>0</uClangAs>
<ClangAsOpt>4</ClangAsOpt>
<VariousControls>
<MiscControls></MiscControls>
<Define></Define>
......@@ -722,6 +723,11 @@
<FileType>1</FileType>
<FilePath>..\..\..\..\kernel\core\tos_ring_queue.c</FilePath>
</File>
<File>
<FileName>tos_stopwatch.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\kernel\core\tos_stopwatch.c</FilePath>
</File>
</Files>
</Group>
<Group>
......@@ -782,11 +788,6 @@
<FileType>1</FileType>
<FilePath>..\..\..\..\net\at\src\tos_at.c</FilePath>
</File>
<File>
<FileName>tos_at_utils.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\net\at\src\tos_at_utils.c</FilePath>
</File>
<File>
<FileName>sal_module_wrapper.c</FileName>
<FileType>1</FileType>
......@@ -824,4 +825,13 @@
<files/>
</RTE>
<LayerInfo>
<Layers>
<Layer>
<LayName>BearPi_STM32L31RC</LayName>
<LayPrjMark>1</LayPrjMark>
</Layer>
</Layers>
</LayerInfo>
</Project>
board/BearPi_STM32L431RC/KEIL/tencent_os_guilite_demo/RTE/_TencentOS_tiny/RTE_Components.h 已删除 100644 → 0
浏览文件 @ 04f980f0
/*
* Auto generated Run-Time-Environment Configuration File
* *** Do not modify ! ***
*
* Project: 'BearPi_STM32L31RC'
* Target: 'TencentOS_tiny'
*/
#ifndef RTE_COMPONENTS_H
#define RTE_COMPONENTS_H
/*
* Define the Device Header File:
*/
#define CMSIS_device_header "stm32l4xx.h"
#endif /* RTE_COMPONENTS_H */
board/BearPi_STM32L431RC/KEIL/tencent_os_stemwin_demo/RTE/_TencentOS_tiny/RTE_Components.h 已删除 100644 → 0
浏览文件 @ 04f980f0
/*
* Auto generated Run-Time-Environment Configuration File
* *** Do not modify ! ***
*
* Project: 'BearPi_STM32L31RC'
* Target: 'TencentOS_tiny'
*/
#ifndef RTE_COMPONENTS_H
#define RTE_COMPONENTS_H
/*
* Define the Device Header File:
*/
#define CMSIS_device_header "stm32l4xx.h"
#endif /* RTE_COMPONENTS_H */
board/BearPi_STM32L431RC/KEIL/tencent_os_stemwin_demo/STemWin_Config/OS/GUI_X_TOS.c
浏览文件 @ 620bdd62
......@@ -54,20 +54,13 @@ Purpose : This file provides emWin Interface with FreeRTOS
/* Includes ------------------------------------------------------------------*/
#include "GUI.h"
/* RT-Thread include files */
//#include "cmsis_os.h"
#include "tos_k.h"
/*********************************************************************
*
* Global data
*/
//static osMutexId osMutex;
//static osSemaphoreId osSemaphore;
/*定义一个互斥锁*/
static k_mutex_t osMutex ;
/*定义一个信号量*/
static k_sem_t osSemaphore ;
/*********************************************************************
*
......@@ -82,13 +75,11 @@ and delay function. Default time unit (tick), normally is
int GUI_X_GetTime(void)
{
//return ((int) xTaskGetTickCount());
return (int)tos_systick_get();
}
void GUI_X_Delay(int ms)
{
//vTaskDelay( ms );
tos_sleep_ms(ms);
}
......@@ -140,51 +131,35 @@ void GUI_X_ExecIdle(void) {
#include <stdio.h>
void GUI_X_InitOS(void)
{
/*创建互斥信号量,用于资源共享*/
//osMutex = rt_mutex_create("osMutex", RT_IPC_FLAG_FIFO);
//RT_ASSERT(osMutex != RT_NULL);
/*创建信号量,用于事件触发*/
//osSemaphore = rt_sem_create("osSem", 0, RT_IPC_FLAG_FIFO);
//RT_ASSERT(osSemaphore != RT_NULL);
tos_mutex_create(&osMutex);
tos_sem_create(&osSemaphore,1);
}
void GUI_X_Unlock(void)
{
//osMutexRelease(osMutex);
//给出互斥量
tos_mutex_post(&osMutex);
}
void GUI_X_Lock(void)
{
//osMutexWait(osMutex , osWaitForever) ;
//获取互斥量
tos_mutex_pend(&osMutex);
}
/* Get Task handle */
U32 GUI_X_GetTaskId(void)
{
//return ((U32) osThreadGetId());
/*获取当前线程句柄*/
return (U32) tos_task_curr_task_get();
}
void GUI_X_WaitEvent (void)
{
// osSemaphoreWait(osSemaphore , osWaitForever) ;
/*获取信号量*/
tos_sem_pend(&osSemaphore,TOS_TIME_FOREVER);
}
void GUI_X_SignalEvent (void)
{
//osMutexRelease(osSemaphore);
/*给出信号量*/
tos_sem_post(&osSemaphore);
}
......
devices/ml302/Makefile 0 → 100644
浏览文件 @ 620bdd62
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
CFGFLAGS += -I$(QTOP)/net/at/include
CFGFLAGS += -I$(QTOP)/net/sal_module_wrapper
include ${QTOP}/qmk/generic/Make.tpl
devices/ml302/ml302.c 0 → 100644
浏览文件 @ 620bdd62
此差异已折叠。
devices/ml302/ml302.h 0 → 100644
浏览文件 @ 620bdd62
/*----------------------------------------------------------------------------
* Tencent is pleased to support the open source community by making TencentOS
* available.
*
* Copyright (C) 2019 THL A29 Limited, a Tencent company. All rights reserved.
* If you have downloaded a copy of the TencentOS binary from Tencent, please
* note that the TencentOS binary is licensed under the BSD 3-Clause License.
*
* If you have downloaded a copy of the TencentOS source code from Tencent,
* please note that TencentOS source code is licensed under the BSD 3-Clause
* License, except for the third-party components listed below which are
* subject to different license terms. Your integration of TencentOS into your
* own projects may require compliance with the BSD 3-Clause License, as well
* as the other licenses applicable to the third-party components included
* within TencentOS.
*---------------------------------------------------------------------------*/
#ifndef __ML302_H_
#define __ML302_H_
#include "tos_hal.h"
int ml302_sal_init(hal_uart_port_t uart_port);
#endif /* __ML302_H_ */
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或