* [rtc] use gmtime_r to replace gmtime

Reason: Interrupts were not cleaned up during initialization

* bug fixed gpio_mode_set miss gd32_spi->mosi_pin,gd32_spi->sck_pin
* feature,add gd32_spi's alt_func_num member for different spi periph's gpio
* feature,add spi3,spi4,and support multi spi devices
* feature,add rt_hw_spi_device_attach api
* tested on the gd32f450i-eval board

1. Add default rtconfig.h header.
2. Fix IP reset issue.
Co-authored-by: NWayne Lin <wclin@nuvoton.com>

* add arg for rt_usb_host_init call

1. Remove dfs_posix.h including for syncing 4.1.0.
2. Fix issue in crypto driver.
3. Add LVGLv81 supporting in NuMaker-M2354 BSP.
4. Update USB board menu in M480 BSP.

* Update drivers.

1. Improve LVGL avg FPS.
2. Sync configuration to 4.1.0.

* [Nuvoton] Update drivers.

1. Fix open-control order issue in CAN driver.
2. [N9H30] Improve N9H30 I2C busy-wait implementation.
3. [N9H30] Support 1024x600x32b LCD panel.
4. Move nu_packages menu into sub-menu of board.

* Update menu-option.

1. Set BOARD_USING_LCM is on by default.
2. Fix default value setting in choice-option.

* Fix control function in I2C driver.

* Add sdk_dist.py and ADC touching calibration function.
Co-authored-by: NWayne Lin <wclin@nuvoton.com>

1. Fix open-control order issue in CAN driver.
2. [N9H30] Improve N9H30 I2C busy-wait implementation.
3. [N9H30] Support 1024x600x32b LCD panel.
4. Move nu_packages menu into sub-menu of board.

* [console] 解决在没有定义RT_USING_DEVICE的情况下使用device报错的问题

* format codes

* [libc] 整理格式

* refresh projects

1. Improve LVGL avg FPS.
2. Sync configuration to 4.1.0.

1. Improve LVGL avg FPS.
2. Sync configuration to 4.1.0.

1. ARM9 EHCI timeout issue.
2. Sync mainstream.

(1) Support NK-N9H30 board.
(2) Change Mutex's flag to RT_IPC_FLAG_PRIO from RT_IPC_FLAG_FIFO.

1. Update module starting ordering.
2. Fix QSPI PDMA configuration.

1. Add NUC980 Chili board supporting.
2. Correct NuMicro.h including.
3. Implement rt_hw_us_delay system call function.
4. Move board.c to drv_common.c for M480 and M2354 series.

1. NUC980 platform: USBH, INPUTCAPTURE, SPINAND.
2. Correct enter-quad-mode routine in board_dec.c.
3. Use RT_ASSERT to catch system-call-exceptions.

1. Add 980 drv_usbd.
2. EMAC - move MDC CLK divider before EMAC initialization.
3. Correct NUC980 and M480 CAN RX_MSG_ID_INDEX definition.
4. add USBD cdc demo - vcom_echo.
5. mnt - add mount_table definition.

1. Fix porting driver.
2. Add NAU8822 audio codec driver.
3. Add NUC980 I2S porting driver.

1. Make up sources and bugfix.
2. Add nu_gpio_pin_get.
3. Add PM operator in USB host driver.
4. Support NUC980 stage 1 and add nk-980iot board.