- 23 10月, 2015 32 次提交
-
-
由 Julien Grall 提交于
Swiotlb is used on ARM64 to support DMA on platform where devices are not protected by an SMMU. Furthermore it's only enabled for DOM0. While Xen is always using 4KB page granularity in the stage-2 page table, Linux ARM64 may either use 4KB or 64KB. This means that a Linux page can be spanned accross multiple Xen page. The Swiotlb code has to validate that the buffer used for DMA is physically contiguous in the memory. As a Linux page can't be shared between local memory and foreign page by design (the balloon code always removing entirely a Linux page), the changes in the code are very minimal because we only need to check the first Xen PFN. Note that it may be possible to optimize the function check_page_physically_contiguous to avoid looping over every Xen PFN for local memory. Although I will let this optimization for a follow-up. Signed-off-by: NJulien Grall <julien.grall@citrix.com> Reviewed-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Julien Grall 提交于
With 64KB page granularity support, the frame number will be different. It will be easier to modify the behavior in a single place rather than in each caller. Signed-off-by: NJulien Grall <julien.grall@citrix.com> Reviewed-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Julien Grall 提交于
The hypercall interface is always using 4KB page granularity. This is requiring to use xen page definition macro when we deal with hypercall. Note that pfn_to_gfn is working with a Xen pfn (i.e 4KB). We may want to rename pfn_gfn to make this explicit. We also allocate a 64KB page for the shared page even though only the first 4KB is used. I don't think this is really important for now as it helps to have the pointer 4KB aligned (XENMEM_add_to_physmap is taking a Xen PFN). Signed-off-by: NJulien Grall <julien.grall@citrix.com> Reviewed-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Julien Grall 提交于
The hypercall interface (as well as the toolstack) is always using 4KB page granularity. When the toolstack is asking for mapping a series of guest PFN in a batch, it expects to have the page map contiguously in its virtual memory. When Linux is using 64KB page granularity, the privcmd driver will have to map multiple Xen PFN in a single Linux page. Note that this solution works on page granularity which is a multiple of 4KB. Signed-off-by: NJulien Grall <julien.grall@citrix.com> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Julien Grall 提交于
The PV network protocol is using 4KB page granularity. The goal of this patch is to allow a Linux using 64KB page granularity working as a network backend on a non-modified Xen. It's only necessary to adapt the ring size and break skb data in small chunk of 4KB. The rest of the code is relying on the grant table code. Signed-off-by: NJulien Grall <julien.grall@citrix.com> Reviewed-by: NWei Liu <wei.liu2@citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Julien Grall 提交于
The PV network protocol is using 4KB page granularity. The goal of this patch is to allow a Linux using 64KB page granularity using network device on a non-modified Xen. It's only necessary to adapt the ring size and break skb data in small chunk of 4KB. The rest of the code is relying on the grant table code. Note that we allocate a Linux page for each rx skb but only the first 4KB is used. We may improve the memory usage by extending the size of the rx skb. Signed-off-by: NJulien Grall <julien.grall@citrix.com> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Julien Grall 提交于
The PV block protocol is using 4KB page granularity. The goal of this patch is to allow a Linux using 64KB page granularity behaving as a block backend on a non-modified Xen. It's only necessary to adapt the ring size and the number of request per indirect frames. The rest of the code is relying on the grant table code. Note that the grant table code is allocating a Linux page per grant which will result to waste 6OKB for every grant when Linux is using 64KB page granularity. This could be improved by sharing the page between multiple grants. Signed-off-by: NJulien Grall <julien.grall@citrix.com> Acked-by: N"Roger Pau Monné" <roger.pau@citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Julien Grall 提交于
The PV block protocol is using 4KB page granularity. The goal of this patch is to allow a Linux using 64KB page granularity using block device on a non-modified Xen. The block API is using segment which should at least be the size of a Linux page. Therefore, the driver will have to break the page in chunk of 4K before giving the page to the backend. When breaking a 64KB segment in 4KB chunks, it is possible that some chunks are empty. As the PV protocol always require to have data in the chunk, we have to count the number of Xen page which will be in use and avoid sending empty chunks. Note that, a pre-defined number of grants are reserved before preparing the request. This pre-defined number is based on the number and the maximum size of the segments. If each segment contains a very small amount of data, the driver may reserve too many grants (16 grants is reserved per segment with 64KB page granularity). Furthermore, in the case of persistent grants we allocate one Linux page per grant although only the first 4KB of the page will be effectively in use. This could be improved by sharing the page with multiple grants. Signed-off-by: NJulien Grall <julien.grall@citrix.com> Acked-by: NRoger Pau Monné <roger.pau@citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Julien Grall 提交于
The Xen interface is using 4KB page granularity. This means that each grant is 4KB. The current implementation allocates a Linux page per grant. On Linux using 64KB page granularity, only the first 4KB of the page will be used. We could decrease the memory wasted by sharing the page with multiple grant. It will require some care with the {Set,Clear}ForeignPage macro. Note that no changes has been made in the x86 code because both Linux and Xen will only use 4KB page granularity. Signed-off-by: NJulien Grall <julien.grall@citrix.com> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Reviewed-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Julien Grall 提交于
Only use the first 4KB of the page to store the events channel info. It means that we will waste 60KB every time we allocate page for: * control block: a page is allocating per CPU * event array: a page is allocating everytime we need to expand it I think we can reduce the memory waste for the 2 areas by: * control block: sharing between multiple vCPUs. Although it will require some bookkeeping in order to not free the page when the CPU goes offline and the other CPUs sharing the page still there * event array: always extend the array event by 64K (i.e 16 4K chunk). That would require more care when we fail to expand the event channel. Signed-off-by: NJulien Grall <julien.grall@citrix.com> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Reviewed-by: NStefano Stabellini <stefano.stabellini@citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Julien Grall 提交于
For ARM64 guests, Linux is able to support either 64K or 4K page granularity. Although, the hypercall interface is always based on 4K page granularity. With 64K page granularity, a single page will be spread over multiple Xen frame. To avoid splitting the page into 4K frame, take advantage of the extent_order field to directly allocate/free chunk of the Linux page size. Note that PVMMU is only used for PV guest (which is x86) and the page granularity is always 4KB. Some BUILD_BUG_ON has been added to ensure that because the code has not been modified. Signed-off-by: NJulien Grall <julien.grall@citrix.com> Reviewed-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Julien Grall 提交于
The console ring is always based on the page granularity of Xen. Signed-off-by: NJulien Grall <julien.grall@citrix.com> Reviewed-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Julien Grall 提交于
All the ring (xenstore, and PV rings) are always based on the page granularity of Xen. Signed-off-by: NJulien Grall <julien.grall@citrix.com> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Reviewed-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Julien Grall 提交于
On ARM all dma-capable devices on a same platform may not be protected by an IOMMU. The DMA requests have to use the BFN (i.e MFN on ARM) in order to use correctly the device. While the DOM0 memory is allocated in a 1:1 fashion (PFN == MFN), grant mapping will screw this contiguous mapping. When Linux is using 64KB page granularitary, the page may be split accross multiple non-contiguous MFN (Xen is using 4KB page granularity). Therefore a DMA request will likely fail. Checking that a 64KB page is using contiguous MFN is tedious. For now, always says that biovec are not mergeable. Signed-off-by: NJulien Grall <julien.grall@citrix.com> Reviewed-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Julien Grall 提交于
Prepare the code to support 64KB page granularity. The first implementation will use a full Linux page per indirect and persistent grant. When non-persistent grant is used, each page of a bio request may be split in multiple grant. Furthermore, the field page of the grant structure is only used to copy data from persistent grant or indirect grant. Avoid to set it for other use case as it will have no meaning given the page will be split in multiple grant. Provide 2 functions, to setup indirect grant, the other for bio page. Signed-off-by: NJulien Grall <julien.grall@citrix.com> Acked-by: NRoger Pau Monné <roger.pau@citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Julien Grall 提交于
All the usage of the field pfn are done using the same idiom: pfn_to_page(grant->pfn) This will return always the same page. Store directly the page in the grant to clean up the code. Signed-off-by: NJulien Grall <julien.grall@citrix.com> Acked-by: NRoger Pau Monné <roger.pau@citrix.com> Reviewed-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Julien Grall 提交于
Currently, blkif_queue_request has 2 distinct execution path: - Send a discard request - Send a read/write request The function is also allocating grants to use for generating the request. Although, this is only used for read/write request. Rather than having a function with 2 distinct execution path, separate the function in 2. This will also remove one level of tabulation. Signed-off-by: NJulien Grall <julien.grall@citrix.com> Reviewed-by: NRoger Pau Monné <roger.pau@citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Julien Grall 提交于
Many PV drivers contain the idiom: pfn = page_to_gfn(...) /* Or similar */ gnttab_grant_foreign_access_ref Replace it by a new helper. Note that when Linux is using a different page granularity than Xen, the helper only gives access to the first 4KB grant. This is useful where drivers are allocating a full Linux page for each grant. Also include xen/interface/grant_table.h rather than xen/grant_table.h in asm/page.h for x86 to fix a compilation issue [1]. Only the former is useful in order to get the structure definition. [1] Interdependency between asm/page.h and xen/grant_table.h which result to page_mfn not being defined when necessary. Signed-off-by: NJulien Grall <julien.grall@citrix.com> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Reviewed-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Julien Grall 提交于
Currently, a grant is always based on the Xen page granularity (i.e 4KB). When Linux is using a different page granularity, a single page will be split between multiple grants. The new helpers will be in charge of splitting the Linux page into grants and call a function given by the caller on each grant. Also provide an helper to count the number of grants within a given contiguous region. Note that the x86/include/asm/xen/page.h is now including xen/interface/grant_table.h rather than xen/grant_table.h. It's necessary because xen/grant_table.h depends on asm/xen/page.h and will break the compilation. Furthermore, only definition in interface/grant_table.h is required. Signed-off-by: NJulien Grall <julien.grall@citrix.com> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Reviewed-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Julien Grall 提交于
The Xen hypercall interface is always using 4K page granularity on ARM and x86 architecture. With the incoming support of 64K page granularity for ARM64 guest, it won't be possible to re-use the Linux page definition in Xen drivers. Introduce Xen page definition helpers based on the Linux page definition. They have exactly the same name but prefixed with XEN_/xen_ prefix. Also modify xen_page_to_gfn to use new Xen page definition. Signed-off-by: NJulien Grall <julien.grall@citrix.com> Reviewed-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Julien Grall 提交于
They are not used in common code expect in one place in balloon.c which is only compiled when Linux is using PV MMU. It's not the case on ARM. Rather than worrying how to handle the 64KB case, drop them. Signed-off-by: NJulien Grall <julien.grall@citrix.com> Reviewed-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Julien Grall 提交于
The skb doesn't change within the function. Therefore it's only necessary to check if we need GSO once at the beginning. Signed-off-by: NJulien Grall <julien.grall@citrix.com> Acked-by: NWei Liu <wei.liu2@citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 David Vrabel 提交于
Pages returned by alloc_xenballooned_pages() will be used for grant mapping which will call set_phys_to_machine() (in PV guests). Ballooned pages are set as INVALID_P2M_ENTRY in the p2m and thus may be using the (shared) missing tables and a subsequent set_phys_to_machine() will need to allocate new tables. Since the grant mapping may be done from a context that cannot sleep, the p2m entries must already be allocated. Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Reviewed-by: NDaniel Kiper <daniel.kiper@oracle.com>
-
由 David Vrabel 提交于
Rename alloc_p2m() to xen_alloc_p2m_entry() and export it. This is useful for ensuring that a p2m entry is allocated (i.e., not a shared missing or identity entry) so that subsequent set_phys_to_machine() calls will require no further allocations. Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Reviewed-by: NDaniel Kiper <daniel.kiper@oracle.com> --- v3: - Make xen_alloc_p2m_entry() a nop on auto-xlate guests.
-
由 David Vrabel 提交于
alloc_xenballooned_pages() is used to get ballooned pages to back foreign mappings etc. Instead of having to balloon out real pages, use (if supported) hotplugged memory. This makes more memory available to the guest and reduces fragmentation in the p2m. This is only enabled if the xen.balloon.hotplug_unpopulated sysctl is set to 1. This sysctl defaults to 0 in case the udev rules to automatically online hotplugged memory do not exist. Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Reviewed-by: NDaniel Kiper <daniel.kiper@oracle.com> --- v3: - Add xen.balloon.hotplug_unpopulated sysctl to enable use of hotplug for unpopulated pages.
-
由 David Vrabel 提交于
All users of alloc_xenballoon_pages() wanted low memory pages, so remove the option for high memory. Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Reviewed-by: NDaniel Kiper <daniel.kiper@oracle.com>
-
由 David Vrabel 提交于
Now that we track the total number of pages (included hotplugged regions), it is easy to determine if more memory needs to be hotplugged. Add a new BP_WAIT state to signal that the balloon process needs to wait until kicked by the memory add notifier (when the new section is onlined by userspace). Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Reviewed-by: NDaniel Kiper <daniel.kiper@oracle.com> --- v3: - Return BP_WAIT if enough sections are already hotplugged. v2: - New BP_WAIT status after adding new memory sections.
-
由 David Vrabel 提交于
The stats used for memory hotplug make no sense and are fiddled with in odd ways. Remove them and introduce total_pages to track the total number of pages (both populated and unpopulated) including those within hotplugged regions (note that this includes not yet onlined pages). This will be used in a subsequent commit (xen/balloon: only hotplug additional memory if required) when deciding whether additional memory needs to be hotplugged. Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Reviewed-by: NDaniel Kiper <daniel.kiper@oracle.com>
-
由 David Vrabel 提交于
Instead of placing hotplugged memory at the end of RAM (which may conflict with PCI devices or reserved regions) use allocate_resource() to get a new, suitably aligned resource that does not conflict. Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Reviewed-by: NDaniel Kiper <daniel.kiper@oracle.com> --- v3: - Remove stale comment.
-
由 David Vrabel 提交于
During setup, discard RAM regions that are above the maximum reservation (instead of marking them as E820_UNUSABLE). This allows hotplug memory to be placed at these addresses. Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Reviewed-by: NDaniel Kiper <daniel.kiper@oracle.com>
-
由 David Vrabel 提交于
Commit 0bb599fd (xen: remove scratch frames for ballooned pages and m2p override) removed the use of the scratch page for ballooned out pages. Remove some left over function definitions. Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Reviewed-by: NDaniel Kiper <daniel.kiper@oracle.com>
-
由 David Vrabel 提交于
Add add_memory_resource() to add memory using an existing "System RAM" resource. This is useful if the memory region is being located by finding a free resource slot with allocate_resource(). Xen guests will make use of this in their balloon driver to hotplug arbitrary amounts of memory in response to toolstack requests. Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Reviewed-by: NDaniel Kiper <daniel.kiper@oracle.com> Reviewed-by: NTang Chen <tangchen@cn.fujitsu.com>
-
- 19 10月, 2015 2 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: "Here are some bugfixes for the I2C subsystem. Kieran found a flaw in the recently renewed wake irq handling. Mika handled a user bug report where the ACPI info turned out to be unusable. I updated MAINTAINERS so that such bug reports will sooner get to the right people. Geert pointed me to a problem of some i2c drivers regarding PM which I fixed" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: designware: Do not use parameters from ACPI on Dell Inspiron 7348 MAINTAINERS: add maintainers for Synopsis Designware I2C drivers i2c: designware-platdrv: enable RuntimePM before registering to the core i2c: s3c2410: enable RuntimePM before registering to the core i2c: rcar: enable RuntimePM before registering to the core i2c: return probe deferred status on dev_pm_domain_attach
-
- 18 10月, 2015 1 次提交
-
-
由 Mika Westerberg 提交于
ACPI SSCN/FMCN methods were originally added because then the platform can provide the most accurate HCNT/LCNT values to the driver. However, this seems not to be true for Dell Inspiron 7348 where using these causes the touchpad to fail in boot: i2c_hid i2c-DLL0675:00: failed to retrieve report from device. i2c_designware INT3433:00: i2c_dw_handle_tx_abort: lost arbitration i2c_hid i2c-DLL0675:00: failed to retrieve report from device. i2c_designware INT3433:00: controller timed out The values received from ACPI are (in fast mode): HCNT: 72 LCNT: 160 this translates to following timings (input clock is 100MHz on Broadwell): tHIGH: 720 ns (spec min 600 ns) tLOW: 1600 ns (spec min 1300 ns) Bus period: 2920 ns (assuming 300 ns tf and tr) Bus speed: 342.5 kHz Both tHIGH and tLOW are within the I2C specification. The calculated values when ACPI parameters are not used are (in fast mode): HCNT: 87 LCNT: 159 which translates to: tHIGH: 870 ns (spec min 600 ns) tLOW: 1590 ns (spec min 1300 ns) Bus period 3060 ns (assuming 300 ns tf and tr) Bus speed 326.8 kHz These values are also within the I2C specification. Since both ACPI and calculated values meet the I2C specification timing requirements it is hard to say why the touchpad does not function properly with the ACPI values except that the bus speed is higher in this case (but still well below the max 400kHz). Solve this by adding DMI quirk to the driver that disables using ACPI parameters on this particulare machine. Reported-by: NPavel Roskin <plroskin@gmail.com> Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com> Tested-by: NPavel Roskin <plroskin@gmail.com> Signed-off-by: NWolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
-
- 17 10月, 2015 5 次提交
-
-
由 Linus Torvalds 提交于
Merge branches 'irq-urgent-for-linus' and 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq/timer fixes from Thomas Gleixner: "irq: a fix for the new hierarchical MSI interrupt handling which unbreaks PCI=n configurations. timers: a fix for the new hrtimer clock offset update mechanism to ensure that the boot time offset is respected" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/msi: Do not use pci_msi_[un]mask_irq as default methods * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Increment clock_was_set_seq in timekeeping_init()
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input fixes from Dmitry Torokhov: "Just two small fixups to ads7846 touchscreen controller driver and Cypress touchpad driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: cyapa - fix the copy paste error on electrodes_rx value Input: ads7846 - correct the value got from SPI
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux由 Linus Torvalds 提交于
Pull clk fix from Stephen Boyd: "Just one revert for Armada XP devices: the conversion to of_clk_get_parent_name() wasn't a direct translation, so we revert back to of_clk_get() + __clk_get_name(). We could make of_clk_get_parent_name() more robust, but that may have unintended side-effects, so we'll do that in the next version" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: Partially revert "clk: mvebu: Convert to clk_hw based provider APIs"
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm由 Linus Torvalds 提交于
Pull device mapper fixes from Mike Snitzer: "Two DM target error path cleanup fixes (one for stable in DM thinp and one for a v4.3-rc5 thinko in DM snapshot)" * tag 'dm-4.3-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm thin: fix missing pool reference count decrement in pool_ctr error path dm snapshot persistent: fix missing cleanup in persistent_ctr error path
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "I have two more bug fixes for btrfs. My commit fixes a bug we hit last week at FB, a combination of lots of hard links and an admin command to resolve inode numbers. Dave is adding checks to make sure balance on current kernels ignores filters it doesn't understand. The penalty for being wrong is just doing more work (not crashing etc), but it's a good fix" * 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: fix use after free iterating extrefs btrfs: check unsupported filters in balance arguments
-