- 07 3月, 2012 5 次提交
-
-
由 Mark Brown 提交于
If we do use regmap then regmap will take care of things for us. We actually already have this check at a higher level for the current users but this makes sure we do the right thing in the future too if we need to. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@ti.com>
-
由 Liam Girdwood 提交于
Currently not all DAPM widget IO ops are holding their component mutex (codec or platform). Make sure this is now held for DAPM widget IO operations. Signed-off-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Liam Girdwood 提交于
Add mutex support for platform IO operations. e.g. can be used for platform DAPM widget IO ops. Signed-off-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Stephen Warren 提交于
Fixes the following warning: sound/soc/tegra/tegra_alc5632.c: In function 'tegra_alc5632_asoc_init': sound/soc/tegra/tegra_alc5632.c:118:6: warning: unused variable 'ret' [-Wunused-variable] Signed-off-by: NStephen Warren <swarren@wwwdotorg.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Liam Girdwood 提交于
Remove printk(KERN_WARNING) and use dev_warn() instead. Signed-off-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 06 3月, 2012 14 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound由 Takashi Iwai 提交于
A few more ASoC updates, the main one is the move of the audmux driver from arch/arm into sound/soc. There's also some general driver specific tweaks and fixes.
-
由 Richard Zhao 提交于
It adds device tree probe support for imx-audmux driver. Signed-off-by: NRichard Zhao <richard.zhao@linaro.org> Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Axel Lin 提交于
commit 891271c2 "ASoC: Convert wm8804 to direct regmap API usage" only converts wm8804_spi_probe to use regmap_init_spi. This patch adds missing regmap_init_i2c in wm8804_i2c_probe. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Save a little RAM. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
The default pm_runtime status is enabled which is what we want. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
When we are out of system sleep always use audio mode for jack detection in order to avoid potential performance issues handing off between modes. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Shawn Guo 提交于
Currently ASoC:imx uses menuconfig option SND_IMX_SOC selects imx-ssi driver, and it works because all the machine driver covered by the menuconfig need to build imx-ssi driver in. However, it will not work any more if we have a imx based machine driver going into the menuconfig while working with fsl_ssi driver (sound/soc/fsl/fsl_ssi.c) rather than imx-ssi one. The patch adds an explicit Kconfig option SND_SOC_IMX_SSI for imx-ssi driver, so that it can be selected independently from the menuconfig option SND_IMX_SOC. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Shawn Guo 提交于
Currently the imx-ssi.c[h] accommodates the imx-pcm common bits which are shared between imx-pcm-dma-mx2 and imx-pcm-fiq drivers. It assumes that imx-pcm-dma-mx2 and imx-pcm-fiq will always be used together with imx-ssi driver. However this becomes untrue when we see that driver sound/soc/fsl/fsl_ssi could possibly work with imx-pcm-dma-mx2 too. The patch moves the imx-pcm common bits from imx-ssi.c[h] into new files imx-pcm.c[h], and let imx-pcm-dma-mx2 and imx-pcm-fiq drivers build it in, so that imx-pcm-dma-mx2 can work with no dependency on imx-ssi driver. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Shawn Guo 提交于
It renames the legacy name mxc used in audmux function and macro to imx. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Shawn Guo 提交于
As audmux becomes a platform driver and its callers are all ASoC machine drivers, there is no reason to keep it in arch folder, so move it to sound/soc/imx. One bonus point would be those ASoC machine drivers stop including mach/audmux.h, since it's been moved to sound/soc/imx/imx-audmux.h. This should be a move to the right direction in terms of single kernel image goal. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Richard Zhao 提交于
It coverts audmux to a platform driver, so that it can be moved into sound/soc/imx and adopt device tree support later. Signed-off-by: NRichard Zhao <richard.zhao@linaro.org> Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Shawn Guo 提交于
It merges audmux-v1 and audmux-v2 under arch/arm/plat-mxc into one. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Shawn Guo 提交于
It moves phycore audmux configuration call from board file into ASoC machine driver phycore-ac97 to ease converting audmux into a platform driver later. It moves phycore audmux configuration call from board file into ASoC machine driver phycore-ac97, so that it gets aligned with wm1133-ev1 and mx27vis-aic32x4, and more importantly it will ease the moving of audmux into sound/soc/imx as a platform driver later. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Shawn Guo 提交于
It moves eukrea audmux configuration call from board file into ASoC machine driver eukrea-tlv320, so that it gets aligned wm1133-ev1 and mx27vis-aic32x4, and more importantly it will ease the moving of audmux into sound/soc/imx as a platform driver later. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 05 3月, 2012 2 次提交
-
-
由 Mark Brown 提交于
The information was not otherwise visible. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@ti.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound由 Takashi Iwai 提交于
This has been a very active release for ASoC, as well as the usual raft of bugfixes and driver updates there's quite a few framework enhancements. Most are either small or are laying the groundwork for user visible features (especially dynamic PCM), the most directly visible change is the dmaengine library. There's also a bunch of regmap API enhancements pulled into the tree so that either the framework or drivers can take advantage of the new features. Changes include: - Support for widgets not associated with a CODEC, an important part of the dynamic PCM framework. - A library factoring out the common code shared by dmaengine based DMA drivers contributed by Lars-Peter Clausen. This will save a lot of code and make it much easier to deploy enhancements to dmaengine. - Support for binary controls, used for providing runtime configuration of algorithm coefficients. - A new DAPM widget type for regulator supplies allowing drivers for devices that can power down unused supplies while active to do without any per-driver code. - DAPM widgets for DAIs, initially giving a speed boost for playback startup and shutdown and also the basis for CODEC<->CODEC DAI link support. - Support for specifying the number of significant bits on audio interfaces, useful for allowing applications to know how much effort to put into generating data for a larger sample format. - Conversion of the FSI driver used on some SH processors to DMAEngine. - New CODEC drivers for Maxim MAX9768 and Wolfson Microelectronics WM2200.
-
- 04 3月, 2012 12 次提交
-
-
由 Denis 'GNUtoo' Carikli 提交于
Without that fix the wm8753 SPI initialization fails, and then produces a kernel panic during boot with the following call trace: Unable to handle kernel paging request at virtual address 37386d9b [<c01ccafc>] (regmap_get_val_bytes+0x0/0x14) from [<c0243dfc>] (snd_soc_codec_set_cache_io+0x9c/0xcc) [<c0243dfc>] (snd_soc_codec_set_cache_io+0x9c/0xcc) from [<c0244a4c>] (wm8753_probe+0x5c/0x1c4) [<c0244a4c>] (wm8753_probe+0x5c/0x1c4) from [<c023bb24>] (soc_probe_codec+0x174/0x284) [<c023bb24>] (soc_probe_codec+0x174/0x284) from [<c023c2c0>] (snd_soc_instantiate_cards+0x68c/0xe28) [<c023c2c0>] (snd_soc_instantiate_cards+0x68c/0xe28) from [<c023d278>] (snd_soc_register_card+0x240/0x2d4) [<c023d278>] (snd_soc_register_card+0x240/0x2d4) from [<c023d330>] (soc_probe+0x24/0x40) [<c023d330>] (soc_probe+0x24/0x40) from [<c01c3900>] (platform_drv_probe+0x14/0x18) [...] The commit d3398ff0 ( ASoC: Convert WM8753 to direct regmap API usage ) introduced the problem. Thanks to Lars-Peter Clausen for helping me a bit during the debugging. Signed-off-by: NDenis 'GNUtoo' Carikli <GNUtoo@no-log.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
There's now core code which falls back to global CODEC operations for DAI calls that needs to be able to tell if it's dealing with a CPU or CODEC DAI and given the small number of DAIs in a typical system and overall memory usage pattern saving a pointer per DAI is really not worth the effort. Reported-by: NIan Lartey <ian@opensource.wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@ti.com>
-
由 Shawn Guo 提交于
It moves and renames sgtl5000 device tree binding document to make it aligned with other codecs. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Shawn Guo 提交于
SND_SOC_AC97_BUS is selected to enable the AC97 support in soc-core. Rather than selecting the option under SND_IMX_SOC, it's better to leave the selection to individual machine driver which knows if AC97 support is needed or not. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Shawn Guo 提交于
It's not necessary for imx-pcm-dma-mx2 to access imx_ssi.dma_params for burstsize initialization. Instead, it can just be done in imx-ssi probe function once. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Push everything through one function for active use cases, should be no practical effect. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
If we're not doing jackdet it's not needed. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Normally this will have no effect as we set detection up at system startup before DAPM syncs take effect, this will only be useful if the system enables and disables detection at runtime. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
The WM1811 DC servo is able to run much faster than previous devices so the benefit of skipping calibration is not useful. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Using snd_soc_write() means we always write to the register even if it already contains the newly calculated value. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 03 3月, 2012 2 次提交
-
-
由 Mark Brown 提交于
snd_soc_register_card() has been available and strongly preferred since 2.6.38 but we're still seeing new drivers using it and the conversion rate for older machines has been low. Help address both issues by logging a warning when the soc-audio device probes. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@ti.com>
-
由 Liam Girdwood 提交于
Make sure we cleanup the platform debugfs when probe fails. Signed-off-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 02 3月, 2012 5 次提交
-
-
由 Lars-Peter Clausen 提交于
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Tested-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NVinod Koul <vinod.koul@linux.intel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Lars-Peter Clausen 提交于
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Tested-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NVinod Koul <vinod.koul@linux.intel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Lars-Peter Clausen 提交于
This patch adds a set of functions which are intended to be used when implementing a dmaengine based sound PCM driver. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Tested-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NVinod Koul <vinod.koul@linux.intel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Class W mode with sidetone is not fully supported. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Don't debounce jack detection for inserted jacks, giving improved responsiveness. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-