提交 56cea3f1 编写于 作者: S Shawn Guo 提交者: Mark Brown

ASoC: imx: add an explicit Kconfig option for imx-ssi driver

Currently ASoC:imx uses menuconfig option SND_IMX_SOC selects imx-ssi
driver, and it works because all the machine driver covered by the
menuconfig need to build imx-ssi driver in.  However, it will not work
any more if we have a imx based machine driver going into the menuconfig
while working with fsl_ssi driver (sound/soc/fsl/fsl_ssi.c) rather than
imx-ssi one.

The patch adds an explicit Kconfig option SND_SOC_IMX_SSI for imx-ssi
driver, so that it can be selected independently from the menuconfig
option SND_IMX_SOC.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
上级 4762fbab
......@@ -8,6 +8,9 @@ menuconfig SND_IMX_SOC
if SND_IMX_SOC
config SND_SOC_IMX_SSI
tristate
config SND_SOC_IMX_PCM
tristate
......@@ -30,6 +33,7 @@ config SND_MXC_SOC_WM1133_EV1
select SND_SOC_WM8350
select SND_MXC_SOC_FIQ
select SND_SOC_IMX_AUDMUX
select SND_SOC_IMX_SSI
help
Enable support for audio on the i.MX31ADS with the WM1133-EV1
PMIC board with WM8835x fitted.
......@@ -40,6 +44,7 @@ config SND_SOC_MX27VIS_AIC32X4
select SND_SOC_TLV320AIC32X4
select SND_MXC_SOC_MX2
select SND_SOC_IMX_AUDMUX
select SND_SOC_IMX_SSI
help
Say Y if you want to add support for SoC audio on Visstrim SM10
board with TLV320AIC32X4 codec.
......@@ -51,6 +56,7 @@ config SND_SOC_PHYCORE_AC97
select SND_SOC_WM9712
select SND_MXC_SOC_FIQ
select SND_SOC_IMX_AUDMUX
select SND_SOC_IMX_SSI
help
Say Y if you want to add support for SoC audio on Phytec phyCORE
and phyCARD boards in AC97 mode
......@@ -65,6 +71,7 @@ config SND_SOC_EUKREA_TLV320
select SND_SOC_TLV320AIC23
select SND_MXC_SOC_FIQ
select SND_SOC_IMX_AUDMUX
select SND_SOC_IMX_SSI
help
Enable I2S based access to the TLV320AIC23B codec attached
to the SSI interface
......
# i.MX Platform Support
snd-soc-imx-objs := imx-ssi.o
snd-soc-imx-ssi-objs := imx-ssi.o
snd-soc-imx-audmux-objs := imx-audmux.o
obj-$(CONFIG_SND_IMX_SOC) += snd-soc-imx.o
obj-$(CONFIG_SND_SOC_IMX_SSI) += snd-soc-imx-ssi.o
obj-$(CONFIG_SND_SOC_IMX_AUDMUX) += snd-soc-imx-audmux.o
obj-$(CONFIG_SND_SOC_IMX_PCM) += snd-soc-imx-pcm.o
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册