Otherwise you can do things like

# mkdir .snap/foo
# cd .snap/foo/.snap
# ls
<badness>
Signed-off-by: NSage Weil <sage@newdream.net>

The standby logic used to be pretty dependent on the work requeueing
behavior that changed when we switched to WQ_NON_REENTRANT.  It was also
very fragile.

Restructure things so that:
 - We clear WRITE_PENDING when we set STANDBY.  This ensures we will
   requeue work when we wake up later.
 - con_work backs off if STANDBY is set.  There is nothing to do if we are
   in standby.
 - clear_standby() helper is called by both con_send() and con_keepalive(),
   the two actions that can wake us up again.  Move the connect_seq++
   logic here.
Signed-off-by: NSage Weil <sage@newdream.net>

There was some broken keepalive code using a dead variable.  Shift to using
the proper bit flag.
Signed-off-by: NSage Weil <sage@newdream.net>

With commit f363e45f we replaced a bunch of hacky workqueue mutual
exclusion logic with the WQ_NON_REENTRANT flag.  One pieces of fallout is
that the exponential backoff breaks in certain cases:

 * con_work attempts to connect.
 * we get an immediate failure, and the socket state change handler queues
   immediate work.
 * con_work calls con_fault, we decide to back off, but can't queue delayed
   work.

In this case, we add a BACKOFF bit to make con_work reschedule delayed work
next time it runs (which should be immediately).
Signed-off-by: NSage Weil <sage@newdream.net>

If we mark the connection CLOSED we will give up trying to reconnect to
this server instance.  That is appropriate for things like a protocol
version mismatch that won't change until the server is restarted, at which
point we'll get a new addr and reconnect.  An authorization failure like
this is probably due to the server not properly rotating it's secret keys,
however, and should be treated as transient so that the normal backoff and
retry behavior kicks in.
Signed-off-by: NSage Weil <sage@newdream.net>

get_user_pages() can return fewer pages than we ask for.  We were returning
a bogus pointer/error code in that case.  Instead, loop until we get all
the pages we want or get an error we can return to the caller.
Signed-off-by: NSage Weil <sage@newdream.net>

First, this was racy anyway: d_release isn't called until well after the
dentry is unhashed.  Second, this runs afoul of the recent dcache change
that clears d_parent prior to calling d_release (949854d0), causing a NULL
pointer dereference.
Signed-off-by: NSage Weil <sage@newdream.net>

Do not set the I_COMPLETE flag on directories until we resolve races with
dcache pruning.
Signed-off-by: NSage Weil <sage@newdream.net>

This reverts commit 97d79b40.

This fails to account for d_parent changes due to rename or disconnected
dentries due to submounts or NFS reexports.
Signed-off-by: NSage Weil <sage@newdream.net>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
  eCryptfs: Copy up lower inode attrs in getattr
  ecryptfs: read on a directory should return EISDIR if not supported
  eCryptfs: Handle NULL nameidata pointers
  eCryptfs: Revert "dont call lookup_one_len to avoid NULL nameidata"

The current code does not follow Intel documentation: It misses some things
and does other, undocumented things. This causes wrong backlight values in
certain conditions. Instead of adding tricky code handling badly documented
and rare corner cases, don't handle combination mode specially at all. This
way PCI_LBPC is never touched and weird things shouldn't happen.

If combination mode is enabled, then the only downside is that changing the
brightness has a greater granularity (the LBPC value), but LBPC is at most
254 and the maximum is in the thousands, so this is no real functional loss.

A potential problem with not handling combined mode is that a brightness of
max * PCI_LBPC is not bright enough. However, this is very unlikely because
from the documentation LBPC seems to act as a scaling factor and doesn't look
like it's supposed to be changed after boot. The value at boot should always
result in a bright enough screen.

IMPORTANT: However, although usually the above is true, it may not be when
people ran an older (2.6.37) kernel which messed up the LBPC register, and
they are unlucky enough to have a BIOS that saves and restores the LBPC value.
Then a good kernel may seem to not work: Max brightness isn't bright enough.
If this happens people should boot back into the old kernel, set brightness
to the maximum, and then reboot. After that everything should be fine.

For more information see the below links. This fixes bugs:

  http://bugzilla.kernel.org/show_bug.cgi?id=23472
  http://bugzilla.kernel.org/show_bug.cgi?id=25072Signed-off-by: NIndan Zupancic <indan@nul.nu>
Tested-by: NAlex Riesen <raa.lkml@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We force particular alignment when we generate attribute structures
when generation MODULE_VERSION() data and we need to make sure that
this alignment is followed when we iterate over these structures,
otherwise we may crash on platforms whose natural alignment is not
sizeof(void *), such as m68k.
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NDmitry Torokhov <dtor@vmware.com>
[ There are more issues here, but the fixes are incredibly ugly - Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86:
  dell-laptop: Toggle the unsupported hardware killswitch
  thinkpad_acpi: Always report scancodes for hotkeys
  acer-wmi: Fix capitalisation of GUID
  platform/x86: ideapad-laptop depends on INPUT
  platform: x86: acer-wmi: world-writable sysfs threeg file
  platform: x86: asus_acpi: world-writable procfs files
  platform: x86: tc1100-wmi: world-writable sysfs wireless and jogdial files
  platform-drivers: x86: pmic: Use request_irq instead of chained handler
  platform-drivers: x86: pmic: Use irq_chip buslock mechanism
  platform-drivers: x86: Convert pmic to new irq_chip functions
  platform-drivers: x86: pmic: Fix up bogus irq hackery

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  fixdep: Do not record dependency on the source file itself

Add fs/eventfd.c to filesystems docbook.
Make typo corrections in fs/eventfd.c.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update the "log_buf_len" description to use [KMG] syntax for the
buffer size.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The '[KMG]' suffix is commonly described after a number of kernel
parameter values documentation.  Explicitly state its semantics.
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Complete the crashkernel= kernel parameter documentation.
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Acked-by: NSimon Horman <horms@verge.net.au>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: keep reference to parent inode on ceph_dentry
  ceph: queue cap_snaps once per realm
  libceph: fix socket write error handling
  libceph: fix socket read error handling

Merge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung

* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S5PV210: Fix regulator names
  ARM: S5PV210: Update max8998_platform_data
  ARM: SAMSUNG: Drop exporting s3c24xx_ts_set_platdata
  ARM: S5P: Fix end address in memory resource information for UART devices
  ARM: S5P64X0: Cleanup map.h file
  ARM: S5P6442: Cleanup map.h file
  ARM: S5PC100: Clenaup map.h file
  ARM: S5PV210: Cleanup map.h file
  ARM: S5PV310: Cleanup map.h file

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] update cifs version
  cifs: Fix regression in LANMAN (LM) auth code
  cifs: fix handling of scopeid in cifs_convert_address

* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6745/1: kprobes insn decoding fix
  ARM: tlb: move noMMU tlb_flush() to asm/tlb.h
  ARM: tlb: delay page freeing for SMP and ARMv7 CPUs
  ARM: Keep exit text/data around for SMP_ON_UP
  ARM: Ensure predictable endian state on signal handler entry
  ARM: 6740/1: Place correctly notes section in the linker script
  ARM: 6700/1: SPEAr: Correct SOC config base address for spear320
  ARM: 6722/1: SPEAr: sp810: switch to slow mode before reset
  ARM: 6712/1: SPEAr: replace readl(), writel() with relaxed versions in uncompress.h
  ARM: 6720/1: SPEAr: Append UL to VMALLOC_END
  ARM: 6676/1: Correct the cpu_architecture() function for ARMv7
  ARM: 6739/1: update .gitignore for boot/compressed
  ARM: 6743/1: errata: interrupted ICALLUIS may prevent completion of broadcasted operation
  ARM: 6742/1: pmu: avoid setting IRQ affinity on UP systems
  ARM: 6741/1: errata: pl310 cache sync operation may be faulty

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] net: provide architecture specific NET_SKB_PAD
  [S390] atomic: use inline asm
  [S390] correct ipl parameter block safe guard
  [S390] atomic: use ACCESS_ONCE() for atomic_read()
  [S390] dasd: correct device table

Update version to 1.71 so we can more easily spot modules with the last two fixes
Signed-off-by: NSteve French <sfrench@us.ibm.com>

It is found on Dell Inspiron 1018 that the firmware reports that the hardware
killswitch is not supported. This makes the rfkill key not functional.

This patch forces the driver to toggle the firmware rfkill status in the case
that the hardware killswitch is indicated as unsupported by the firmware.
Signed-off-by: NKeng-Yu Lin <keng-yu.lin@canonical.com>
Tested-by: NAlessio Igor Bogani <abogani@texware.it>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Some thinkpad hotkeys report key codes like KEY_FN_F8 when something
like KEY_VOLUMEDOWN is desired. Always provide the scan codes in
addition to the key codes to assist with debugging these issues. Also
send the scan code before the key code to match what other drivers do,
as some userspace utilities expect this ordering.
Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

6AF4F258-B401-42fd-BE91-3D4AC2D7C0D3 needs to be
6AF4F258-B401-42FD-BE91-3D4AC2D7C0D3 to match the hardware alias.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Acked-by: NCarlos Corbacho <carlos@strangeworlds.co.uk>
Cc: stable@kernel.org

Most platform/x86 drivers that use INPUT_SPARSEKMAP also depend on INPUT,
so do the same for ideapad-laptop.  This fixes a kconfig warning and
subsequent build errors when CONFIG_INPUT is disabled.

warning: (ACER_WMI && ASUS_LAPTOP && DELL_WMI && HP_WMI && PANASONIC_LAPTOP && IDEAPAD_LAPTOP && EEEPC_LAPTOP && EEEPC_WMI && MSI_WMI && TOPSTAR_LAPTOP && ACPI_TOSHIBA) selects INPUT_SPARSEKMAP which has unmet direct dependencies (!S390 && INPUT)

ERROR: "input_free_device" [drivers/platform/x86/ideapad-laptop.ko] undefined!
ERROR: "input_register_device" [drivers/platform/x86/ideapad-laptop.ko] undefined!
ERROR: "sparse_keymap_setup" [drivers/platform/x86/ideapad-laptop.ko] undefined!
ERROR: "input_allocate_device" [drivers/platform/x86/ideapad-laptop.ko] undefined!
ERROR: "input_unregister_device" [drivers/platform/x86/ideapad-laptop.ko] undefined!
ERROR: "sparse_keymap_free" [drivers/platform/x86/ideapad-laptop.ko] undefined!
ERROR: "sparse_keymap_report_event" [drivers/platform/x86/ideapad-laptop.ko] undefined!
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Don't allow everybody to write to hardware registers.
Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Don't allow everybody to change ACPI settings.  The comment says that it
is done deliberatelly, however, the comment before disp_proc_write()
says that at least one of these setting is experimental.
Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Don't allow everybody to change WMI settings.
Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

There is no need to install a chained handler for this hardware. This
is a plain x86 IOAPIC interrupt which is handled by the core code
perfectly fine. There is nothing special about demultiplexing these
gpio interrupts which justifies a custom hack. Replace it by a plain
old interrupt handler installed with request_irq. That makes the code
agnostic about the underlying primary interrupt hardware. The overhead
for this is minimal, but it gives us the advantage of accounting,
balancing and to detect interrupt storms. gpio interrupts are not
really that performance critical.

Patch fixups from akpm
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

LANMAN response length was changed to 16 bytes instead of 24 bytes.
Revert it back to 24 bytes.
Signed-off-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com>
CC: stable@kernel.org
Signed-off-by: NSteve French <sfrench@us.ibm.com>

The lower filesystem may do some type of inode revalidation during a
getattr call. eCryptfs should take advantage of that by copying the
lower inode attributes to the eCryptfs inode after a call to
vfs_getattr() on the lower inode.

I originally wrote this fix while working on eCryptfs on nfsv3 support,
but discovered it also fixed an eCryptfs on ext4 nanosecond timestamp
bug that was reported.

https://bugs.launchpad.net/bugs/613873

Cc: <stable@kernel.org>
Signed-off-by: NTyler Hicks <tyhicks@linux.vnet.ibm.com>

read() calls against a file descriptor connected to a directory are
incorrectly returning EINVAL rather than EISDIR:

  [EISDIR]
    [XSI] [Option Start] The fildes argument refers to a directory and the
    implementation does not allow the directory to be read using read()
    or pread(). The readdir() function should be used instead. [Option End]

This occurs because we do not have a .read operation defined for
ecryptfs directories.  Connect this up to generic_read_dir().

BugLink: http://bugs.launchpad.net/bugs/719691Signed-off-by: NAndy Whitcroft <apw@canonical.com>
Signed-off-by: NTyler Hicks <tyhicks@linux.vnet.ibm.com>

Allow for NULL nameidata pointers in eCryptfs create, lookup, and
d_revalidate functions.
Signed-off-by: NTyler Hicks <tyhicks@linux.vnet.ibm.com>

Marcin Slusarz says:

> In arch/arm/kernel/kprobes-decode.c there's a function
> arm_kprobe_decode_insn which does:
>
> } else if ((insn & 0x0e000000) == 0x0c400000) {
> ...
>
> This is always false, so code below is dead.
> I found this bug by coccinelle (http://coccinelle.lip6.fr/).
Reported-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

There's no need to noMMU to put tlb_flush() in asm/tlbflush.h - it's
part of the tlb shootdown interface.  Move it to asm/tlb.h instead, as
per x86.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

We need to delay freeing any mapped page on SMP and ARMv7 systems to
ensure that the data is not accessed by other CPUs, or is used for
speculative prefetch with ARMv7.  This includes not only mapped pages
but also pages used for the page tables themselves.

This avoids races with the MMU/other CPUs accessing pages after they've
been freed but before we've invalidated the TLB.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>