提交 5fb24b81 编写于 作者: L Linus Torvalds

Merge branch 'for_linus' of...

Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86:
  dell-laptop: Toggle the unsupported hardware killswitch
  thinkpad_acpi: Always report scancodes for hotkeys
  acer-wmi: Fix capitalisation of GUID
  platform/x86: ideapad-laptop depends on INPUT
  platform: x86: acer-wmi: world-writable sysfs threeg file
  platform: x86: asus_acpi: world-writable procfs files
  platform: x86: tc1100-wmi: world-writable sysfs wireless and jogdial files
  platform-drivers: x86: pmic: Use request_irq instead of chained handler
  platform-drivers: x86: pmic: Use irq_chip buslock mechanism
  platform-drivers: x86: Convert pmic to new irq_chip functions
  platform-drivers: x86: pmic: Fix up bogus irq hackery
......@@ -227,7 +227,7 @@ config SONYPI_COMPAT
config IDEAPAD_LAPTOP
tristate "Lenovo IdeaPad Laptop Extras"
depends on ACPI
depends on RFKILL
depends on RFKILL && INPUT
select INPUT_SPARSEKMAP
help
This is a driver for the rfkill switches on Lenovo IdeaPad netbooks.
......
......@@ -84,7 +84,7 @@ MODULE_LICENSE("GPL");
*/
#define AMW0_GUID1 "67C3371D-95A3-4C37-BB61-DD47B491DAAB"
#define AMW0_GUID2 "431F16ED-0C2B-444C-B267-27DEB140CF9C"
#define WMID_GUID1 "6AF4F258-B401-42fd-BE91-3D4AC2D7C0D3"
#define WMID_GUID1 "6AF4F258-B401-42FD-BE91-3D4AC2D7C0D3"
#define WMID_GUID2 "95764E09-FB56-4e83-B31A-37761F60994A"
#define WMID_GUID3 "61EF69EA-865C-4BC3-A502-A0DEBA0CB531"
......@@ -1280,7 +1280,7 @@ static ssize_t set_bool_threeg(struct device *dev,
return -EINVAL;
return count;
}
static DEVICE_ATTR(threeg, S_IWUGO | S_IRUGO | S_IWUSR, show_bool_threeg,
static DEVICE_ATTR(threeg, S_IRUGO | S_IWUSR, show_bool_threeg,
set_bool_threeg);
static ssize_t show_interface(struct device *dev, struct device_attribute *attr,
......
......@@ -1081,14 +1081,8 @@ static int asus_hotk_add_fs(struct acpi_device *device)
struct proc_dir_entry *proc;
mode_t mode;
/*
* If parameter uid or gid is not changed, keep the default setting for
* our proc entries (-rw-rw-rw-) else, it means we care about security,
* and then set to -rw-rw----
*/
if ((asus_uid == 0) && (asus_gid == 0)) {
mode = S_IFREG | S_IRUGO | S_IWUGO;
mode = S_IFREG | S_IRUGO | S_IWUSR | S_IWGRP;
} else {
mode = S_IFREG | S_IRUSR | S_IRGRP | S_IWUSR | S_IWGRP;
printk(KERN_WARNING " asus_uid and asus_gid parameters are "
......
......@@ -290,9 +290,12 @@ static int dell_rfkill_set(void *data, bool blocked)
dell_send_request(buffer, 17, 11);
/* If the hardware switch controls this radio, and the hardware
switch is disabled, don't allow changing the software state */
switch is disabled, don't allow changing the software state.
If the hardware switch is reported as not supported, always
fire the SMI to toggle the killswitch. */
if ((hwswitch_state & BIT(hwswitch_bit)) &&
!(buffer->output[1] & BIT(16))) {
!(buffer->output[1] & BIT(16)) &&
(buffer->output[1] & BIT(0))) {
ret = -EINVAL;
goto out;
}
......@@ -398,6 +401,23 @@ static const struct file_operations dell_debugfs_fops = {
static void dell_update_rfkill(struct work_struct *ignored)
{
int status;
get_buffer();
dell_send_request(buffer, 17, 11);
status = buffer->output[1];
release_buffer();
/* if hardware rfkill is not supported, set it explicitly */
if (!(status & BIT(0))) {
if (wifi_rfkill)
dell_rfkill_set((void *)1, !((status & BIT(17)) >> 17));
if (bluetooth_rfkill)
dell_rfkill_set((void *)2, !((status & BIT(18)) >> 18));
if (wwan_rfkill)
dell_rfkill_set((void *)3, !((status & BIT(19)) >> 19));
}
if (wifi_rfkill)
dell_rfkill_query(wifi_rfkill, (void *)1);
if (bluetooth_rfkill)
......
......@@ -60,69 +60,20 @@ enum pmic_gpio_register {
#define GPOSW_DOU 0x08
#define GPOSW_RDRV 0x30
#define GPIO_UPDATE_TYPE 0x80000000
#define NUM_GPIO 24
struct pmic_gpio_irq {
spinlock_t lock;
u32 trigger[NUM_GPIO];
u32 dirty;
struct work_struct work;
};
struct pmic_gpio {
struct mutex buslock;
struct gpio_chip chip;
struct pmic_gpio_irq irqtypes;
void *gpiointr;
int irq;
unsigned irq_base;
unsigned int update_type;
u32 trigger_type;
};
static void pmic_program_irqtype(int gpio, int type)
{
if (type & IRQ_TYPE_EDGE_RISING)
intel_scu_ipc_update_register(GPIO0 + gpio, 0x20, 0x20);
else
intel_scu_ipc_update_register(GPIO0 + gpio, 0x00, 0x20);
if (type & IRQ_TYPE_EDGE_FALLING)
intel_scu_ipc_update_register(GPIO0 + gpio, 0x10, 0x10);
else
intel_scu_ipc_update_register(GPIO0 + gpio, 0x00, 0x10);
};
static void pmic_irqtype_work(struct work_struct *work)
{
struct pmic_gpio_irq *t =
container_of(work, struct pmic_gpio_irq, work);
unsigned long flags;
int i;
u16 type;
spin_lock_irqsave(&t->lock, flags);
/* As we drop the lock, we may need multiple scans if we race the
pmic_irq_type function */
while (t->dirty) {
/*
* For each pin that has the dirty bit set send an IPC
* message to configure the hardware via the PMIC
*/
for (i = 0; i < NUM_GPIO; i++) {
if (!(t->dirty & (1 << i)))
continue;
t->dirty &= ~(1 << i);
/* We can't trust the array entry or dirty
once the lock is dropped */
type = t->trigger[i];
spin_unlock_irqrestore(&t->lock, flags);
pmic_program_irqtype(i, type);
spin_lock_irqsave(&t->lock, flags);
}
}
spin_unlock_irqrestore(&t->lock, flags);
}
static int pmic_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
if (offset > 8) {
......@@ -190,25 +141,24 @@ static void pmic_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
1 << (offset - 16));
}
static int pmic_irq_type(unsigned irq, unsigned type)
/*
* This is called from genirq with pg->buslock locked and
* irq_desc->lock held. We can not access the scu bus here, so we
* store the change and update in the bus_sync_unlock() function below
*/
static int pmic_irq_type(struct irq_data *data, unsigned type)
{
struct pmic_gpio *pg = get_irq_chip_data(irq);
u32 gpio = irq - pg->irq_base;
unsigned long flags;
struct pmic_gpio *pg = irq_data_get_irq_chip_data(data);
u32 gpio = data->irq - pg->irq_base;
if (gpio >= pg->chip.ngpio)
return -EINVAL;
spin_lock_irqsave(&pg->irqtypes.lock, flags);
pg->irqtypes.trigger[gpio] = type;
pg->irqtypes.dirty |= (1 << gpio);
spin_unlock_irqrestore(&pg->irqtypes.lock, flags);
schedule_work(&pg->irqtypes.work);
pg->trigger_type = type;
pg->update_type = gpio | GPIO_UPDATE_TYPE;
return 0;
}
static int pmic_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
{
struct pmic_gpio *pg = container_of(chip, struct pmic_gpio, chip);
......@@ -217,38 +167,32 @@ static int pmic_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
}
/* the gpiointr register is read-clear, so just do nothing. */
static void pmic_irq_unmask(unsigned irq)
{
};
static void pmic_irq_unmask(struct irq_data *data) { }
static void pmic_irq_mask(unsigned irq)
{
};
static void pmic_irq_mask(struct irq_data *data) { }
static struct irq_chip pmic_irqchip = {
.name = "PMIC-GPIO",
.mask = pmic_irq_mask,
.unmask = pmic_irq_unmask,
.set_type = pmic_irq_type,
.irq_mask = pmic_irq_mask,
.irq_unmask = pmic_irq_unmask,
.irq_set_type = pmic_irq_type,
};
static void pmic_irq_handler(unsigned irq, struct irq_desc *desc)
static irqreturn_t pmic_irq_handler(int irq, void *data)
{
struct pmic_gpio *pg = (struct pmic_gpio *)get_irq_data(irq);
struct pmic_gpio *pg = data;
u8 intsts = *((u8 *)pg->gpiointr + 4);
int gpio;
irqreturn_t ret = IRQ_NONE;
for (gpio = 0; gpio < 8; gpio++) {
if (intsts & (1 << gpio)) {
pr_debug("pmic pin %d triggered\n", gpio);
generic_handle_irq(pg->irq_base + gpio);
ret = IRQ_HANDLED;
}
}
if (desc->chip->irq_eoi)
desc->chip->irq_eoi(irq_get_irq_data(irq));
else
dev_warn(pg->chip.dev, "missing EOI handler for irq %d\n", irq);
return ret;
}
static int __devinit platform_pmic_gpio_probe(struct platform_device *pdev)
......@@ -297,8 +241,7 @@ static int __devinit platform_pmic_gpio_probe(struct platform_device *pdev)
pg->chip.can_sleep = 1;
pg->chip.dev = dev;
INIT_WORK(&pg->irqtypes.work, pmic_irqtype_work);
spin_lock_init(&pg->irqtypes.lock);
mutex_init(&pg->buslock);
pg->chip.dev = dev;
retval = gpiochip_add(&pg->chip);
......@@ -306,8 +249,13 @@ static int __devinit platform_pmic_gpio_probe(struct platform_device *pdev)
printk(KERN_ERR "%s: Can not add pmic gpio chip.\n", __func__);
goto err;
}
set_irq_data(pg->irq, pg);
set_irq_chained_handler(pg->irq, pmic_irq_handler);
retval = request_irq(pg->irq, pmic_irq_handler, 0, "pmic", pg);
if (retval) {
printk(KERN_WARNING "pmic: Interrupt request failed\n");
goto err;
}
for (i = 0; i < 8; i++) {
set_irq_chip_and_handler_name(i + pg->irq_base, &pmic_irqchip,
handle_simple_irq, "demux");
......
......@@ -162,7 +162,7 @@ set_bool_##value(struct device *dev, struct device_attribute *attr, \
return -EINVAL; \
return count; \
} \
static DEVICE_ATTR(value, S_IWUGO | S_IRUGO | S_IWUSR, \
static DEVICE_ATTR(value, S_IRUGO | S_IWUSR, \
show_bool_##value, set_bool_##value);
show_set_bool(wireless, TC1100_INSTANCE_WIRELESS);
......
......@@ -2275,16 +2275,12 @@ static void tpacpi_input_send_key(const unsigned int scancode)
if (keycode != KEY_RESERVED) {
mutex_lock(&tpacpi_inputdev_send_mutex);
input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN, scancode);
input_report_key(tpacpi_inputdev, keycode, 1);
if (keycode == KEY_UNKNOWN)
input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN,
scancode);
input_sync(tpacpi_inputdev);
input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN, scancode);
input_report_key(tpacpi_inputdev, keycode, 0);
if (keycode == KEY_UNKNOWN)
input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN,
scancode);
input_sync(tpacpi_inputdev);
mutex_unlock(&tpacpi_inputdev_send_mutex);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册