au1xxx-ide.c 17.5 KB
Newer Older
P
Pete Popov 已提交
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
/*
 * BRIEF MODULE DESCRIPTION
 * AMD Alchemy Au1xxx IDE interface routines over the Static Bus
 *
 * Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
 *
 * This program is free software; you can redistribute it and/or modify it under
 * the terms of the GNU General Public License as published by the Free Software
 * Foundation; either version 2 of the License, or (at your option) any later
 * version.
 *
 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
 * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
 *       Interface and Linux Device Driver" Application Note.
 */
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
J
Jordan Crouse 已提交
34
#include <linux/platform_device.h>
P
Pete Popov 已提交
35 36
#include <linux/init.h>
#include <linux/ide.h>
S
Sergei Shtylyov 已提交
37
#include <linux/scatterlist.h>
P
Pete Popov 已提交
38 39 40 41 42 43

#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
#include <asm/mach-au1x00/au1xxx_ide.h>

#define DRV_NAME	"au1200-ide"
J
Jordan Crouse 已提交
44
#define DRV_AUTHOR	"Enrico Walther <enrico.walther@amd.com> / Pete Popov <ppopov@embeddedalley.com>"
P
Pete Popov 已提交
45

J
Jordan Crouse 已提交
46 47
/* enable the burstmode in the dbdma */
#define IDE_AU1XXX_BURSTMODE	1
P
Pete Popov 已提交
48

J
Jordan Crouse 已提交
49 50
static _auide_hwif auide_hwif;
static int dbdma_init_done;
P
Pete Popov 已提交
51

52 53
static int auide_ddma_init(_auide_hwif *auide);

P
Pete Popov 已提交
54 55
#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA)

J
Jordan Crouse 已提交
56
void auide_insw(unsigned long port, void *addr, u32 count)
P
Pete Popov 已提交
57
{
J
Jordan Crouse 已提交
58 59 60
	_auide_hwif *ahwif = &auide_hwif;
	chan_tab_t *ctp;
	au1x_ddma_desc_t *dp;
P
Pete Popov 已提交
61

J
Jordan Crouse 已提交
62 63 64 65 66 67 68 69 70 71
	if(!put_dest_flags(ahwif->rx_chan, (void*)addr, count << 1, 
			   DDMA_FLAGS_NOIE)) {
		printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__);
		return;
	}
	ctp = *((chan_tab_t **)ahwif->rx_chan);
	dp = ctp->cur_ptr;
	while (dp->dscr_cmd0 & DSCR_CMD0_V)
		;
	ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp);
P
Pete Popov 已提交
72 73
}

J
Jordan Crouse 已提交
74
void auide_outsw(unsigned long port, void *addr, u32 count)
P
Pete Popov 已提交
75
{
J
Jordan Crouse 已提交
76 77 78
	_auide_hwif *ahwif = &auide_hwif;
	chan_tab_t *ctp;
	au1x_ddma_desc_t *dp;
P
Pete Popov 已提交
79

J
Jordan Crouse 已提交
80 81 82 83 84 85 86 87 88 89
	if(!put_source_flags(ahwif->tx_chan, (void*)addr,
			     count << 1, DDMA_FLAGS_NOIE)) {
		printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__);
		return;
	}
	ctp = *((chan_tab_t **)ahwif->tx_chan);
	dp = ctp->cur_ptr;
	while (dp->dscr_cmd0 & DSCR_CMD0_V)
		;
	ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp);
P
Pete Popov 已提交
90 91 92 93
}

#endif

94
static void au1xxx_set_pio_mode(ide_drive_t *drive, const u8 pio)
P
Pete Popov 已提交
95
{
96
	int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2);
J
Jordan Crouse 已提交
97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153

	/* set pio mode! */
	switch(pio) {
	case 0:
		mem_sttime = SBC_IDE_TIMING(PIO0);

		/* set configuration for RCS2# */
		mem_stcfg |= TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_PIO0_TCSOE | SBC_IDE_PIO0_TOECS;
		break;

	case 1:
		mem_sttime = SBC_IDE_TIMING(PIO1);

		/* set configuration for RCS2# */
		mem_stcfg |= TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_PIO1_TCSOE | SBC_IDE_PIO1_TOECS;
		break;

	case 2:
		mem_sttime = SBC_IDE_TIMING(PIO2);

		/* set configuration for RCS2# */
		mem_stcfg &= ~TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_PIO2_TCSOE | SBC_IDE_PIO2_TOECS;
		break;

	case 3:
		mem_sttime = SBC_IDE_TIMING(PIO3);

		/* set configuration for RCS2# */
		mem_stcfg &= ~TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_PIO3_TCSOE | SBC_IDE_PIO3_TOECS;

		break;

	case 4:
		mem_sttime = SBC_IDE_TIMING(PIO4);

		/* set configuration for RCS2# */
		mem_stcfg &= ~TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_PIO4_TCSOE | SBC_IDE_PIO4_TOECS;
		break;
	}

	au_writel(mem_sttime,MEM_STTIME2);
	au_writel(mem_stcfg,MEM_STCFG2);
P
Pete Popov 已提交
154 155
}

156
static void auide_set_dma_mode(ide_drive_t *drive, const u8 speed)
P
Pete Popov 已提交
157
{
158
	int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2);
P
Pete Popov 已提交
159

J
Jordan Crouse 已提交
160
	switch(speed) {
P
Pete Popov 已提交
161
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
J
Jordan Crouse 已提交
162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191
	case XFER_MW_DMA_2:
		mem_sttime = SBC_IDE_TIMING(MDMA2);

		/* set configuration for RCS2# */
		mem_stcfg &= ~TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_MDMA2_TCSOE | SBC_IDE_MDMA2_TOECS;

		break;
	case XFER_MW_DMA_1:
		mem_sttime = SBC_IDE_TIMING(MDMA1);

		/* set configuration for RCS2# */
		mem_stcfg &= ~TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_MDMA1_TCSOE | SBC_IDE_MDMA1_TOECS;

		break;
	case XFER_MW_DMA_0:
		mem_sttime = SBC_IDE_TIMING(MDMA0);

		/* set configuration for RCS2# */
		mem_stcfg |= TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_MDMA0_TCSOE | SBC_IDE_MDMA0_TOECS;

		break;
P
Pete Popov 已提交
192
#endif
J
Jordan Crouse 已提交
193
	}
194

J
Jordan Crouse 已提交
195 196
	au_writel(mem_sttime,MEM_STTIME2);
	au_writel(mem_stcfg,MEM_STCFG2);
P
Pete Popov 已提交
197 198 199 200 201 202
}

/*
 * Multi-Word DMA + DbDMA functions
 */

J
Jordan Crouse 已提交
203
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
P
Pete Popov 已提交
204 205
static int auide_build_dmatable(ide_drive_t *drive)
{
J
Jordan Crouse 已提交
206 207 208 209 210 211 212 213 214 215 216 217
	int i, iswrite, count = 0;
	ide_hwif_t *hwif = HWIF(drive);

	struct request *rq = HWGROUP(drive)->rq;

	_auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data;
	struct scatterlist *sg;

	iswrite = (rq_data_dir(rq) == WRITE);
	/* Save for interrupt context */
	ahwif->drive = drive;

218
	hwif->sg_nents = i = ide_build_sglist(drive, rq);
J
Jordan Crouse 已提交
219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249

	if (!i)
		return 0;

	/* fill the descriptors */
	sg = hwif->sg_table;
	while (i && sg_dma_len(sg)) {
		u32 cur_addr;
		u32 cur_len;

		cur_addr = sg_dma_address(sg);
		cur_len = sg_dma_len(sg);

		while (cur_len) {
			u32 flags = DDMA_FLAGS_NOIE;
			unsigned int tc = (cur_len < 0xfe00)? cur_len: 0xfe00;

			if (++count >= PRD_ENTRIES) {
				printk(KERN_WARNING "%s: DMA table too small\n",
				       drive->name);
				goto use_pio_instead;
			}

			/* Lets enable intr for the last descriptor only */
			if (1==i)
				flags = DDMA_FLAGS_IE;
			else
				flags = DDMA_FLAGS_NOIE;

			if (iswrite) {
				if(!put_source_flags(ahwif->tx_chan, 
J
Jens Axboe 已提交
250
						     (void*) sg_virt(sg),
J
Jordan Crouse 已提交
251 252 253
						     tc, flags)) { 
					printk(KERN_ERR "%s failed %d\n", 
					       __FUNCTION__, __LINE__);
P
Pete Popov 已提交
254
				}
J
Jordan Crouse 已提交
255
			} else 
P
Pete Popov 已提交
256
			{
J
Jordan Crouse 已提交
257
				if(!put_dest_flags(ahwif->rx_chan, 
J
Jens Axboe 已提交
258
						   (void*) sg_virt(sg),
J
Jordan Crouse 已提交
259 260 261
						   tc, flags)) { 
					printk(KERN_ERR "%s failed %d\n", 
					       __FUNCTION__, __LINE__);
P
Pete Popov 已提交
262
				}
J
Jordan Crouse 已提交
263
			}
P
Pete Popov 已提交
264

J
Jordan Crouse 已提交
265 266 267
			cur_addr += tc;
			cur_len -= tc;
		}
J
Jens Axboe 已提交
268
		sg = sg_next(sg);
J
Jordan Crouse 已提交
269 270
		i--;
	}
P
Pete Popov 已提交
271

J
Jordan Crouse 已提交
272 273
	if (count)
		return 1;
P
Pete Popov 已提交
274

J
Jordan Crouse 已提交
275
 use_pio_instead:
276
	ide_destroy_dmatable(drive);
P
Pete Popov 已提交
277

J
Jordan Crouse 已提交
278
	return 0; /* revert to PIO for this request */
P
Pete Popov 已提交
279 280 281 282
}

static int auide_dma_end(ide_drive_t *drive)
{
J
Jordan Crouse 已提交
283
	ide_hwif_t *hwif = HWIF(drive);
P
Pete Popov 已提交
284

J
Jordan Crouse 已提交
285
	if (hwif->sg_nents) {
286
		ide_destroy_dmatable(drive);
J
Jordan Crouse 已提交
287 288
		hwif->sg_nents = 0;
	}
P
Pete Popov 已提交
289

J
Jordan Crouse 已提交
290
	return 0;
P
Pete Popov 已提交
291 292 293 294 295 296 297 298 299
}

static void auide_dma_start(ide_drive_t *drive )
{
}


static void auide_dma_exec_cmd(ide_drive_t *drive, u8 command)
{
J
Jordan Crouse 已提交
300 301 302
	/* issue cmd to drive */
	ide_execute_command(drive, command, &ide_dma_intr,
			    (2*WAIT_CMD), NULL);
P
Pete Popov 已提交
303 304 305
}

static int auide_dma_setup(ide_drive_t *drive)
J
Jordan Crouse 已提交
306 307
{       	
	struct request *rq = HWGROUP(drive)->rq;
P
Pete Popov 已提交
308

J
Jordan Crouse 已提交
309 310 311 312
	if (!auide_build_dmatable(drive)) {
		ide_map_sg(drive, rq);
		return 1;
	}
P
Pete Popov 已提交
313

J
Jordan Crouse 已提交
314 315
	drive->waiting_for_dma = 1;
	return 0;
P
Pete Popov 已提交
316 317
}

318
static u8 auide_mdma_filter(ide_drive_t *drive)
P
Pete Popov 已提交
319
{
320 321 322 323 324 325 326 327
	/*
	 * FIXME: ->white_list and ->black_list are based on completely bogus
	 * ->ide_dma_check implementation which didn't set neither the host
	 * controller timings nor the device for the desired transfer mode.
	 *
	 * They should be either removed or 0x00 MWDMA mask should be
	 * returned for devices on the ->black_list.
	 */
J
Jordan Crouse 已提交
328

329
	if (dbdma_init_done == 0) {
J
Jordan Crouse 已提交
330 331 332 333 334 335 336 337
		auide_hwif.white_list = ide_in_drive_list(drive->id,
							  dma_white_list);
		auide_hwif.black_list = ide_in_drive_list(drive->id,
							  dma_black_list);
		auide_hwif.drive = drive;
		auide_ddma_init(&auide_hwif);
		dbdma_init_done = 1;
	}
P
Pete Popov 已提交
338

J
Jordan Crouse 已提交
339
	/* Is the drive in our DMA black list? */
340
	if (auide_hwif.black_list)
J
Jordan Crouse 已提交
341
		printk(KERN_WARNING "%s: Disabling DMA for %s (blacklisted)\n",
342
				    drive->name, drive->id->model);
J
Jordan Crouse 已提交
343

344 345 346
	return drive->hwif->mwdma_mask;
}

P
Pete Popov 已提交
347
static int auide_dma_test_irq(ide_drive_t *drive)
J
Jordan Crouse 已提交
348 349 350
{	
	if (drive->waiting_for_dma == 0)
		printk(KERN_WARNING "%s: ide_dma_test_irq \
P
Pete Popov 已提交
351 352
                                     called while not waiting\n", drive->name);

J
Jordan Crouse 已提交
353 354
	/* If dbdma didn't execute the STOP command yet, the
	 * active bit is still set
P
Pete Popov 已提交
355
	 */
J
Jordan Crouse 已提交
356 357 358
	drive->waiting_for_dma++;
	if (drive->waiting_for_dma >= DMA_WAIT_TIMEOUT) {
		printk(KERN_WARNING "%s: timeout waiting for ddma to \
P
Pete Popov 已提交
359
                                     complete\n", drive->name);
J
Jordan Crouse 已提交
360 361 362 363
		return 1;
	}
	udelay(10);
	return 0;
P
Pete Popov 已提交
364 365
}

366
static void auide_dma_host_set(ide_drive_t *drive, int on)
P
Pete Popov 已提交
367 368 369
{
}

370
static void auide_dma_lost_irq(ide_drive_t *drive)
P
Pete Popov 已提交
371
{
J
Jordan Crouse 已提交
372
	printk(KERN_ERR "%s: IRQ lost\n", drive->name);
P
Pete Popov 已提交
373 374
}

375
static void auide_ddma_tx_callback(int irq, void *param)
P
Pete Popov 已提交
376
{
J
Jordan Crouse 已提交
377 378
	_auide_hwif *ahwif = (_auide_hwif*)param;
	ahwif->drive->waiting_for_dma = 0;
P
Pete Popov 已提交
379 380
}

381
static void auide_ddma_rx_callback(int irq, void *param)
P
Pete Popov 已提交
382
{
J
Jordan Crouse 已提交
383 384 385 386 387
	_auide_hwif *ahwif = (_auide_hwif*)param;
	ahwif->drive->waiting_for_dma = 0;
}

#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
P
Pete Popov 已提交
388

J
Jordan Crouse 已提交
389 390 391 392 393 394 395 396 397
static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 devwidth, u32 flags)
{
	dev->dev_id          = dev_id;
	dev->dev_physaddr    = (u32)AU1XXX_ATA_PHYS_ADDR;
	dev->dev_intlevel    = 0;
	dev->dev_intpolarity = 0;
	dev->dev_tsize       = tsize;
	dev->dev_devwidth    = devwidth;
	dev->dev_flags       = flags;
P
Pete Popov 已提交
398
}
J
Jordan Crouse 已提交
399 400
  
#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
P
Pete Popov 已提交
401

402
static void auide_dma_timeout(ide_drive_t *drive)
P
Pete Popov 已提交
403
{
404
	ide_hwif_t *hwif = HWIF(drive);
P
Pete Popov 已提交
405

J
Jordan Crouse 已提交
406
	printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name);
P
Pete Popov 已提交
407

408 409
	if (hwif->ide_dma_test_irq(drive))
		return;
P
Pete Popov 已提交
410

411
	hwif->ide_dma_end(drive);
P
Pete Popov 已提交
412
}
J
Jordan Crouse 已提交
413
					
P
Pete Popov 已提交
414

J
Jordan Crouse 已提交
415 416 417 418 419
static int auide_ddma_init(_auide_hwif *auide) {
	
	dbdev_tab_t source_dev_tab, target_dev_tab;
	u32 dev_id, tsize, devwidth, flags;
	ide_hwif_t *hwif = auide->hwif;
P
Pete Popov 已提交
420

J
Jordan Crouse 已提交
421
	dev_id   = AU1XXX_ATA_DDMA_REQ;
P
Pete Popov 已提交
422

J
Jordan Crouse 已提交
423 424 425 426 427 428 429 430 431 432 433
	if (auide->white_list || auide->black_list) {
		tsize    = 8;
		devwidth = 32;
	}
	else { 
		tsize    = 1;
		devwidth = 16;
		
		printk(KERN_ERR "au1xxx-ide: %s is not on ide driver whitelist.\n",auide_hwif.drive->id->model);
		printk(KERN_ERR "            please read 'Documentation/mips/AU1xxx_IDE.README'");
	}
P
Pete Popov 已提交
434

J
Jordan Crouse 已提交
435 436
#ifdef IDE_AU1XXX_BURSTMODE 
	flags = DEV_FLAGS_SYNC | DEV_FLAGS_BURSTABLE;
P
Pete Popov 已提交
437
#else
J
Jordan Crouse 已提交
438
	flags = DEV_FLAGS_SYNC;
P
Pete Popov 已提交
439 440
#endif

J
Jordan Crouse 已提交
441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474
	/* setup dev_tab for tx channel */
	auide_init_dbdma_dev( &source_dev_tab,
			      dev_id,
			      tsize, devwidth, DEV_FLAGS_OUT | flags);
 	auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );

	auide_init_dbdma_dev( &source_dev_tab,
			      dev_id,
			      tsize, devwidth, DEV_FLAGS_IN | flags);
 	auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
	
	/* We also need to add a target device for the DMA */
	auide_init_dbdma_dev( &target_dev_tab,
			      (u32)DSCR_CMD0_ALWAYS,
			      tsize, devwidth, DEV_FLAGS_ANYUSE);
	auide->target_dev_id = au1xxx_ddma_add_device(&target_dev_tab);	
 
	/* Get a channel for TX */
	auide->tx_chan = au1xxx_dbdma_chan_alloc(auide->target_dev_id,
						 auide->tx_dev_id,
						 auide_ddma_tx_callback,
						 (void*)auide);
 
	/* Get a channel for RX */
	auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id,
						 auide->target_dev_id,
						 auide_ddma_rx_callback,
						 (void*)auide);

	auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan,
							     NUM_DESCRIPTORS);
	auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan,
							     NUM_DESCRIPTORS);
 
475
	hwif->dmatable_cpu = dma_alloc_coherent(hwif->dev,
J
Jordan Crouse 已提交
476 477 478 479 480 481 482 483
						PRD_ENTRIES * PRD_BYTES,        /* 1 Page */
						&hwif->dmatable_dma, GFP_KERNEL);
	
	au1xxx_dbdma_start( auide->tx_chan );
	au1xxx_dbdma_start( auide->rx_chan );
 
	return 0;
} 
P
Pete Popov 已提交
484
#else
J
Jordan Crouse 已提交
485 486 487 488 489
 
static int auide_ddma_init( _auide_hwif *auide )
{
	dbdev_tab_t source_dev_tab;
	int flags;
P
Pete Popov 已提交
490

J
Jordan Crouse 已提交
491 492 493 494
#ifdef IDE_AU1XXX_BURSTMODE 
	flags = DEV_FLAGS_SYNC | DEV_FLAGS_BURSTABLE;
#else
	flags = DEV_FLAGS_SYNC;
P
Pete Popov 已提交
495 496
#endif

J
Jordan Crouse 已提交
497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528
	/* setup dev_tab for tx channel */
	auide_init_dbdma_dev( &source_dev_tab,
			      (u32)DSCR_CMD0_ALWAYS,
			      8, 32, DEV_FLAGS_OUT | flags);
 	auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );

	auide_init_dbdma_dev( &source_dev_tab,
			      (u32)DSCR_CMD0_ALWAYS,
			      8, 32, DEV_FLAGS_IN | flags);
 	auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
	
	/* Get a channel for TX */
	auide->tx_chan = au1xxx_dbdma_chan_alloc(DSCR_CMD0_ALWAYS,
						 auide->tx_dev_id,
						 NULL,
						 (void*)auide);
 
	/* Get a channel for RX */
	auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id,
						 DSCR_CMD0_ALWAYS,
						 NULL,
						 (void*)auide);
 
	auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan,
							     NUM_DESCRIPTORS);
	auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan,
							     NUM_DESCRIPTORS);
 
	au1xxx_dbdma_start( auide->tx_chan );
	au1xxx_dbdma_start( auide->rx_chan );
 	
	return 0;
P
Pete Popov 已提交
529
}
J
Jordan Crouse 已提交
530
#endif
P
Pete Popov 已提交
531 532 533

static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif)
{
J
Jordan Crouse 已提交
534 535 536 537 538 539 540 541 542 543
	int i;
	unsigned long *ata_regs = hw->io_ports;

	/* FIXME? */
	for (i = 0; i < IDE_CONTROL_OFFSET; i++) {
		*ata_regs++ = ahwif->regbase + (i << AU1XXX_ATA_REG_OFFSET);
	}

	/* set the Alternative Status register */
	*ata_regs = ahwif->regbase + (14 << AU1XXX_ATA_REG_OFFSET);
P
Pete Popov 已提交
544 545
}

546 547 548
static const struct ide_port_info au1xxx_port_info = {
	.host_flags		= IDE_HFLAG_POST_SET_MODE |
				  IDE_HFLAG_NO_DMA | /* no SFF-style DMA */
549
				  IDE_HFLAG_NO_IO_32BIT |
550 551 552 553 554 555 556
				  IDE_HFLAG_UNMASK_IRQS,
	.pio_mask		= ATA_PIO4,
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
	.mwdma_mask		= ATA_MWDMA2,
#endif
};

P
Pete Popov 已提交
557 558 559
static int au_ide_probe(struct device *dev)
{
	struct platform_device *pdev = to_platform_device(dev);
J
Jordan Crouse 已提交
560 561
	_auide_hwif *ahwif = &auide_hwif;
	ide_hwif_t *hwif;
P
Pete Popov 已提交
562 563
	struct resource *res;
	int ret = 0;
564
	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
565
	hw_regs_t hw;
P
Pete Popov 已提交
566 567

#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
J
Jordan Crouse 已提交
568
	char *mode = "MWDMA2";
P
Pete Popov 已提交
569
#elif defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA)
J
Jordan Crouse 已提交
570
	char *mode = "PIO+DDMA(offload)";
P
Pete Popov 已提交
571 572
#endif

J
Jordan Crouse 已提交
573
	memset(&auide_hwif, 0, sizeof(_auide_hwif));
P
Pete Popov 已提交
574 575 576 577 578 579 580
	ahwif->irq = platform_get_irq(pdev, 0);

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);

	if (res == NULL) {
		pr_debug("%s %d: no base address\n", DRV_NAME, pdev->id);
		ret = -ENODEV;
581 582 583 584 585
		goto out;
	}
	if (ahwif->irq < 0) {
		pr_debug("%s %d: no IRQ\n", DRV_NAME, pdev->id);
		ret = -ENODEV;
P
Pete Popov 已提交
586 587 588
		goto out;
	}

589 590
	if (!request_mem_region(res->start, res->end - res->start + 1,
				pdev->name)) {
P
Pete Popov 已提交
591
		pr_debug("%s: request_mem_region failed\n", DRV_NAME);
J
Jordan Crouse 已提交
592
		ret =  -EBUSY;
P
Pete Popov 已提交
593
		goto out;
J
Jordan Crouse 已提交
594
	}
P
Pete Popov 已提交
595

596
	ahwif->regbase = (u32)ioremap(res->start, res->end - res->start + 1);
P
Pete Popov 已提交
597 598 599 600 601
	if (ahwif->regbase == 0) {
		ret = -ENOMEM;
		goto out;
	}

J
Jordan Crouse 已提交
602 603 604
	/* FIXME:  This might possibly break PCMCIA IDE devices */

	hwif                            = &ide_hwifs[pdev->id];
P
Pete Popov 已提交
605

606 607
	memset(&hw, 0, sizeof(hw));
	auide_setup_ports(&hw, ahwif);
608
	hw.irq = ahwif->irq;
609
	hw.dev = dev;
610 611 612
	hw.chipset = ide_au1xxx;

	ide_init_port_hw(hwif, &hw);
P
Pete Popov 已提交
613

614 615
	hwif->dev = dev;

J
Jordan Crouse 已提交
616 617
	/* hold should be on in all cases */
	hwif->hold                      = 1;
618 619

	hwif->mmio  = 1;
J
Jordan Crouse 已提交
620 621 622 623 624 625 626 627

	/* If the user has selected DDMA assisted copies,
	   then set up a few local I/O function entry points 
	*/

#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA	
	hwif->INSW                      = auide_insw;
	hwif->OUTSW                     = auide_outsw;
P
Pete Popov 已提交
628
#endif
J
Jordan Crouse 已提交
629

630
	hwif->set_pio_mode		= &au1xxx_set_pio_mode;
631
	hwif->set_dma_mode		= &auide_set_dma_mode;
P
Pete Popov 已提交
632 633

#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
634
	hwif->dma_timeout		= &auide_dma_timeout;
J
Jordan Crouse 已提交
635

636 637
	hwif->mdma_filter		= &auide_mdma_filter;

638
	hwif->dma_host_set		= &auide_dma_host_set;
J
Jordan Crouse 已提交
639 640 641 642 643
	hwif->dma_exec_cmd              = &auide_dma_exec_cmd;
	hwif->dma_start                 = &auide_dma_start;
	hwif->ide_dma_end               = &auide_dma_end;
	hwif->dma_setup                 = &auide_dma_setup;
	hwif->ide_dma_test_irq          = &auide_dma_test_irq;
644
	hwif->dma_lost_irq		= &auide_dma_lost_irq;
645
#endif
J
Jordan Crouse 已提交
646 647 648 649 650
	hwif->select_data               = 0;    /* no chipset-specific code */
	hwif->config_data               = 0;    /* no chipset-specific code */

	auide_hwif.hwif                 = hwif;
	hwif->hwif_data                 = &auide_hwif;
P
Pete Popov 已提交
651

J
Jordan Crouse 已提交
652 653 654
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA           
	auide_ddma_init(&auide_hwif);
	dbdma_init_done = 1;
P
Pete Popov 已提交
655 656
#endif

657
	idx[0] = hwif->index;
658

659
	ide_device_add(idx, &au1xxx_port_info);
660

P
Pete Popov 已提交
661 662
	dev_set_drvdata(dev, hwif);

J
Jordan Crouse 已提交
663
	printk(KERN_INFO "Au1xxx IDE(builtin) configured for %s\n", mode );
P
Pete Popov 已提交
664

J
Jordan Crouse 已提交
665 666
 out:
	return ret;
P
Pete Popov 已提交
667 668 669 670 671 672 673
}

static int au_ide_remove(struct device *dev)
{
	struct platform_device *pdev = to_platform_device(dev);
	struct resource *res;
	ide_hwif_t *hwif = dev_get_drvdata(dev);
J
Jordan Crouse 已提交
674
	_auide_hwif *ahwif = &auide_hwif;
P
Pete Popov 已提交
675

676
	ide_unregister(hwif->index, 0, 0);
P
Pete Popov 已提交
677 678 679 680

	iounmap((void *)ahwif->regbase);

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
681
	release_mem_region(res->start, res->end - res->start + 1);
P
Pete Popov 已提交
682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697

	return 0;
}

static struct device_driver au1200_ide_driver = {
	.name		= "au1200-ide",
	.bus		= &platform_bus_type,
	.probe 		= au_ide_probe,
	.remove		= au_ide_remove,
};

static int __init au_ide_init(void)
{
	return driver_register(&au1200_ide_driver);
}

J
Jordan Crouse 已提交
698
static void __exit au_ide_exit(void)
P
Pete Popov 已提交
699 700 701 702 703 704 705 706 707
{
	driver_unregister(&au1200_ide_driver);
}

MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("AU1200 IDE driver");

module_init(au_ide_init);
module_exit(au_ide_exit);