提交 8446f659 编写于 作者: B Bartlomiej Zolnierkiewicz

au1xxx-ide: use ide_tune_dma()

* Remove needless setting of drive->using_dma from auide_dma_check().

* Split off auide_mdma_filter() from auide_dma_check().

* Use ide_tune_dma() in auide_dma_check(), this fixes following issues:
  - device's DMA capability bit not being checked
  - device not being checked against generic DMA blacklist
  - transfer mode not being set on device/host

* Add PIO autotune fallback to auide_dma_check().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
上级 8c91abf8
......@@ -351,11 +351,18 @@ static int auide_dma_setup(ide_drive_t *drive)
return 0;
}
static int auide_dma_check(ide_drive_t *drive)
static u8 auide_mdma_filter(ide_drive_t *drive)
{
u8 speed = ide_max_dma_mode(drive);
/*
* FIXME: ->white_list and ->black_list are based on completely bogus
* ->ide_dma_check implementation which didn't set neither the host
* controller timings nor the device for the desired transfer mode.
*
* They should be either removed or 0x00 MWDMA mask should be
* returned for devices on the ->black_list.
*/
if( dbdma_init_done == 0 ){
if (dbdma_init_done == 0) {
auide_hwif.white_list = ide_in_drive_list(drive->id,
dma_white_list);
auide_hwif.black_list = ide_in_drive_list(drive->id,
......@@ -366,21 +373,20 @@ static int auide_dma_check(ide_drive_t *drive)
}
/* Is the drive in our DMA black list? */
if ( auide_hwif.black_list ) {
drive->using_dma = 0;
/* Borrowed the warning message from ide-dma.c */
if (auide_hwif.black_list)
printk(KERN_WARNING "%s: Disabling DMA for %s (blacklisted)\n",
drive->name, drive->id->model);
}
else
drive->using_dma = 1;
drive->name, drive->id->model);
if (drive->autodma && (speed & XFER_MODE) != XFER_PIO)
return drive->hwif->mwdma_mask;
}
static int auide_dma_check(ide_drive_t *drive)
{
if (ide_tune_dma(drive))
return 0;
ide_set_max_pio(drive);
return -1;
}
......@@ -692,6 +698,8 @@ static int au_ide_probe(struct device *dev)
hwif->dma_off_quietly = &auide_dma_off_quietly;
hwif->dma_timeout = &auide_dma_timeout;
hwif->mdma_filter = &auide_mdma_filter;
hwif->ide_dma_check = &auide_dma_check;
hwif->dma_exec_cmd = &auide_dma_exec_cmd;
hwif->dma_start = &auide_dma_start;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册