Skip to content

R
rt-thread

在你之后 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 2
Star 0
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 3d4e5e1f 编写于 作者: B bernard.xiong@gmail.com
浏览文件
操作

update library to 3.5.0; update project file to Keil4. 

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1557 bbd45198-f89e-11dd-88c7-29a3b14d5316
上级 311e6695
展开全部 隐藏空白更改
内联 并排
Showing with 6175 addition and 6183 deletion
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_cl.s
浏览文件 @ 3d4e5e1f
/**
******************************************************************************
* @file startup_stm32f10x_cl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x Connectivity line Devices vector table for Atollic
* toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR
* address.
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_cl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Connectivity line Devices vector table for Atollic
* toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR
* address.
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -469,4 +470,4 @@ g_pfnVectors:
.weak OTG_FS_IRQHandler
.thumb_set OTG_FS_IRQHandler ,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_hd.s
浏览文件 @ 3d4e5e1f
/**
******************************************************************************
* @file startup_stm32f10x_hd.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x High Density Devices vector table for Atollic toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address,
* - Configure the clock system
* - Configure external SRAM mounted on STM3210E-EVAL board
* to be used as data memory (optional, to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_hd.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x High Density Devices vector table for Atollic toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address,
* - Configure the clock system
* - Configure external SRAM mounted on STM3210E-EVAL board
* to be used as data memory (optional, to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -465,4 +466,4 @@ g_pfnVectors:
.weak DMA2_Channel4_5_IRQHandler
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_hd_vl.s
浏览文件 @ 3d4e5e1f
/**
******************************************************************************
* @file startup_stm32f10x_hd_vl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x High Density Value Line Devices vector table for Atollic toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Configure external SRAM mounted on STM32100E-EVAL board
* to be used as data memory (optional, to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_hd_vl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x High Density Value Line Devices vector table for Atollic
* toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Configure external SRAM mounted on STM32100E-EVAL board
* to be used as data memory (optional, to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -191,7 +193,7 @@ g_pfnVectors:
.word TIM14_IRQHandler
.word 0
.word 0
.word FSMC_IRQHandler
.word 0
.word 0
.word TIM5_IRQHandler
.word SPI3_IRQHandler
......@@ -412,9 +414,6 @@ g_pfnVectors:
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak FSMC_IRQHandler
.thumb_set FSMC_IRQHandler,Default_Handler
.weak TIM5_IRQHandler
.thumb_set TIM5_IRQHandler,Default_Handler
......@@ -448,5 +447,5 @@ g_pfnVectors:
.weak DMA2_Channel5_IRQHandler
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_ld.s
浏览文件 @ 3d4e5e1f
/**
******************************************************************************
* @file startup_stm32f10x_ld.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x Low Density Devices vector table for Atollic toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address.
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_ld.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Low Density Devices vector table for Atollic toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address.
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -343,4 +344,4 @@ g_pfnVectors:
.weak USBWakeUp_IRQHandler
.thumb_set USBWakeUp_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_ld_vl.s
浏览文件 @ 3d4e5e1f
/**
******************************************************************************
* @file startup_stm32f10x_ld_vl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x Low Density Value Line Devices vector table for Atollic toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_ld_vl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Low Density Value Line Devices vector table for Atollic toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -387,5 +388,5 @@ g_pfnVectors:
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_md.s
浏览文件 @ 3d4e5e1f
/**
******************************************************************************
* @file startup_stm32f10x_md.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x Medium Density Devices vector table for Atollic toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_md.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Medium Density Devices vector table for Atollic toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -358,5 +359,5 @@ g_pfnVectors:
.weak USBWakeUp_IRQHandler
.thumb_set USBWakeUp_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_md_vl.s
浏览文件 @ 3d4e5e1f
/**
******************************************************************************
* @file startup_stm32f10x_md_vl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x Medium Density Value Line Devices vector table for Atollic toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_md_vl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Medium Density Value Line Devices vector table for Atollic
* toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -402,5 +404,5 @@ g_pfnVectors:
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_xl.s
浏览文件 @ 3d4e5e1f
/**
******************************************************************************
* @file startup_stm32f10x_xl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x XL-Density Devices vector table for TrueSTUDIO toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system and the external SRAM mounted on
* STM3210E-EVAL board to be used as data memory (optional,
* to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_xl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x XL-Density Devices vector table for TrueSTUDIO toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system and the external SRAM mounted on
* STM3210E-EVAL board to be used as data memory (optional,
* to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -463,4 +464,4 @@ g_pfnVectors:
.weak DMA2_Channel4_5_IRQHandler
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_cl.s
浏览文件 @ 3d4e5e1f
;******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_cl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Connectivity line devices vector table for MDK-ARM
;* toolchain.
;* This module performs:
......@@ -365,4 +365,4 @@ __user_initial_stackheap
END
;******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE*****
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_hd.s
浏览文件 @ 3d4e5e1f
;******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_hd.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x High Density Devices vector table for MDK-ARM
;* toolchain.
;* This module performs:
......@@ -355,4 +355,4 @@ __user_initial_stackheap
END
;******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE*****
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_hd_vl.s
浏览文件 @ 3d4e5e1f
;******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_hd_vl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x High Density Value Line Devices vector table
;* for MDK-ARM toolchain.
;* This module performs:
......@@ -126,7 +126,7 @@ __Vectors DCD __initial_sp ; Top of Stack
DCD TIM14_IRQHandler ; TIM14
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD FSMC_IRQHandler ; FSMC
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD TIM5_IRQHandler ; TIM5
DCD SPI3_IRQHandler ; SPI3
......@@ -244,7 +244,6 @@ Default_Handler PROC
EXPORT TIM12_IRQHandler [WEAK]
EXPORT TIM13_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT FSMC_IRQHandler [WEAK]
EXPORT TIM5_IRQHandler [WEAK]
EXPORT SPI3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
......@@ -299,7 +298,6 @@ CEC_IRQHandler
TIM12_IRQHandler
TIM13_IRQHandler
TIM14_IRQHandler
FSMC_IRQHandler
TIM5_IRQHandler
SPI3_IRQHandler
UART4_IRQHandler
......@@ -345,4 +343,4 @@ __user_initial_stackheap
END
;******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE*****
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_ld.s
浏览文件 @ 3d4e5e1f
;******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_ld.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Low Density Devices vector table for MDK-ARM
;* toolchain.
;* This module performs:
......@@ -294,4 +294,4 @@ __user_initial_stackheap
END
;******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE*****
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_ld_vl.s
浏览文件 @ 3d4e5e1f
;******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_ld_vl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Low Density Value Line Devices vector table
;* for MDK-ARM toolchain.
;* This module performs:
......@@ -301,4 +301,4 @@ __user_initial_stackheap
END
;******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE*****
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_md.s
浏览文件 @ 3d4e5e1f
;******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_md.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Medium Density Devices vector table for MDK-ARM
;* toolchain.
;* This module performs:
......@@ -304,4 +304,4 @@ __user_initial_stackheap
END
;******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE*****
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_md_vl.s
浏览文件 @ 3d4e5e1f
;******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_md_vl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Medium Density Value Line Devices vector table
;* for MDK-ARM toolchain.
;* This module performs:
......@@ -312,4 +312,4 @@ __user_initial_stackheap
END
;******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE*****
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_xl.s
浏览文件 @ 3d4e5e1f
;******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_xl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x XL-Density Devices vector table for MDK-ARM
;* toolchain.
;* This module performs:
......@@ -355,4 +355,4 @@ __user_initial_stackheap
END
;******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE*****
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_cl.s
浏览文件 @ 3d4e5e1f
/**
******************************************************************************
* @file startup_stm32f10x_cl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x Connectivity line Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR
* address.
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_cl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Connectivity line Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR
* address.
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -464,4 +465,4 @@ g_pfnVectors:
.weak OTG_FS_IRQHandler
.thumb_set OTG_FS_IRQHandler ,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_hd.s
浏览文件 @ 3d4e5e1f
/**
******************************************************************************
* @file startup_stm32f10x_hd.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x High Density Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system and the external SRAM mounted on
* STM3210E-EVAL board to be used as data memory (optional,
* to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_hd.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x High Density Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system and the external SRAM mounted on
* STM3210E-EVAL board to be used as data memory (optional,
* to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -461,4 +462,4 @@ g_pfnVectors:
.weak DMA2_Channel4_5_IRQHandler
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_hd_vl.s
浏览文件 @ 3d4e5e1f
/**
******************************************************************************
* @file startup_stm32f10x_hd_vl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x High Density Value Line Devices vector table for RIDE7
* toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system and the external SRAM mounted on
* STM32100E-EVAL board to be used as data memory (optional,
* to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_hd_vl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x High Density Value Line Devices vector table for RIDE7
* toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system and the external SRAM mounted on
* STM32100E-EVAL board to be used as data memory (optional,
* to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -187,7 +188,7 @@ g_pfnVectors:
.word TIM14_IRQHandler
.word 0
.word 0
.word FSMC_IRQHandler
.word 0
.word 0
.word TIM5_IRQHandler
.word SPI3_IRQHandler
......@@ -405,9 +406,6 @@ g_pfnVectors:
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak FSMC_IRQHandler
.thumb_set FSMC_IRQHandler,Default_Handler
.weak TIM5_IRQHandler
.thumb_set TIM5_IRQHandler,Default_Handler
......@@ -441,4 +439,4 @@ g_pfnVectors:
.weak DMA2_Channel5_IRQHandler
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_ld.s
浏览文件 @ 3d4e5e1f
/**
******************************************************************************
* @file startup_stm32f10x_ld.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x Low Density Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_ld.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Low Density Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -339,4 +340,4 @@ g_pfnVectors:
.weak USBWakeUp_IRQHandler
.thumb_set USBWakeUp_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_ld_vl.s
浏览文件 @ 3d4e5e1f
/**
******************************************************************************
* @file startup_stm32f10x_ld_vl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x Low Density Value Line Devices vector table for RIDE7
* toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_ld_vl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Low Density Value Line Devices vector table for RIDE7
* toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -379,4 +380,4 @@ g_pfnVectors:
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_md.s
浏览文件 @ 3d4e5e1f
/**
******************************************************************************
* @file startup_stm32f10x_md.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x Medium Density Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_md.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Medium Density Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -354,4 +355,4 @@ g_pfnVectors:
.weak USBWakeUp_IRQHandler
.thumb_set USBWakeUp_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_md_vl.s
浏览文件 @ 3d4e5e1f
/**
******************************************************************************
* @file startup_stm32f10x_md_vl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x Medium Density Value Line Devices vector table for RIDE7
* toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_md_vl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Medium Density Value Line Devices vector table for RIDE7
* toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -395,4 +396,4 @@ g_pfnVectors:
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_xl.s
浏览文件 @ 3d4e5e1f
/**
******************************************************************************
* @file startup_stm32f10x_xl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x XL-Density Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system and the external SRAM mounted on
* STM3210E-EVAL board to be used as data memory (optional,
* to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
******************************************************************************
* @file startup_stm32f10x_xl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x XL-Density Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system and the external SRAM mounted on
* STM3210E-EVAL board to be used as data memory (optional,
* to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
......@@ -461,4 +462,4 @@ g_pfnVectors:
.weak DMA2_Channel4_5_IRQHandler
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_cl.s
浏览文件 @ 3d4e5e1f
;/******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics *******************
;* File Name : startup_stm32f10x_cl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Connectivity line devices vector table for
;* EWARM5.x toolchain.
;* EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Configure the clock system
......@@ -20,7 +20,7 @@
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************/
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
......@@ -504,4 +504,4 @@ OTG_FS_IRQHandler
B OTG_FS_IRQHandler
END
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_hd.s
浏览文件 @ 3d4e5e1f
;/******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_hd.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Description : STM32F10x High Density Devices vector table for EWARM5.x
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x High Density Devices vector table for EWARM
;* toolchain.
;* This module performs:
;* - Set the initial SP
......@@ -21,7 +21,7 @@
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************/
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
......@@ -493,4 +493,4 @@ DMA2_Channel4_5_IRQHandler
END
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_hd_vl.s
浏览文件 @ 3d4e5e1f
;/******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_hd_vl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x High Density Value Line Devices vector table
;* for EWARM5.x toolchain.
;* for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Configure the clock system and the external SRAM
......@@ -22,7 +22,7 @@
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************/
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
......@@ -119,7 +119,7 @@ __vector_table
DCD TIM14_IRQHandler ; TIM14
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD FSMC_IRQHandler ; FSMC
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD TIM5_IRQHandler ; TIM5
DCD SPI3_IRQHandler ; SPI3
......@@ -402,11 +402,6 @@ TIM13_IRQHandler
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK FSMC_IRQHandler
SECTION .text:CODE:REORDER(1)
FSMC_IRQHandler
B FSMC_IRQHandler
PUBWEAK TIM5_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM5_IRQHandler
......@@ -463,4 +458,4 @@ DMA2_Channel5_IRQHandler
B DMA2_Channel5_IRQHandler
END
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_ld.s
浏览文件 @ 3d4e5e1f
;/******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_ld.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Description : STM32F10x Low Density Devices vector table for EWARM5.x
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Low Density Devices vector table for EWARM
;* toolchain.
;* This module performs:
;* - Set the initial SP
......@@ -20,7 +20,7 @@
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************/
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
......@@ -363,4 +363,4 @@ USBWakeUp_IRQHandler
B USBWakeUp_IRQHandler
END
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_ld_vl.s
浏览文件 @ 3d4e5e1f
;/******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_ld_vl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Low Density Value Line Devices vector table
;* for EWARM5.x toolchain.
;* for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Configure the clock system
......@@ -20,7 +20,7 @@
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************/
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
......@@ -366,4 +366,4 @@ TIM7_IRQHandler
B TIM7_IRQHandler
END
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_md.s
浏览文件 @ 3d4e5e1f
;/******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_md.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Medium Density Devices vector table for
;* EWARM5.x toolchain.
;* EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Configure the clock system
......@@ -20,7 +20,7 @@
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************/
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
......@@ -388,4 +388,4 @@ USBWakeUp_IRQHandler
B USBWakeUp_IRQHandler
END
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_md_vl.s
浏览文件 @ 3d4e5e1f
;/******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_md_vl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Medium Density Value Line Devices vector table
;* for EWARM5.x toolchain.
;* for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Configure the clock system
......@@ -20,7 +20,7 @@
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************/
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
......@@ -391,4 +391,4 @@ TIM7_IRQHandler
B TIM7_IRQHandler
END
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_xl.s
浏览文件 @ 3d4e5e1f
;/******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_xl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Description : STM32F10x XL-Density Devices vector table for EWARM5.x
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x XL-Density Devices vector table for EWARM
;* toolchain.
;* This module performs:
;* - Set the initial SP
......@@ -21,7 +21,7 @@
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************/
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
......@@ -493,4 +493,4 @@ DMA2_Channel4_5_IRQHandler
END
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.h
浏览文件 @ 3d4e5e1f
......@@ -2,10 +2,11 @@
******************************************************************************
* @file system_stm32f10x.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Header File.
******************************************************************************
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -14,7 +15,7 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
......@@ -94,4 +95,4 @@ extern void SystemCoreClockUpdate(void);
/**
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/SConscript
浏览文件 @ 3d4e5e1f
......@@ -2,9 +2,13 @@ import rtconfig
Import('RTT_ROOT')
from building import *
# get current directory
cwd = GetCurrentDir()
# The set of source files associated with this SConscript file.
src = Split("""
CMSIS/CM3/CoreSupport/core_cm3.c
CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.c
STM32F10x_StdPeriph_Driver/src/stm32f10x_crc.c
STM32F10x_StdPeriph_Driver/src/stm32f10x_rcc.c
STM32F10x_StdPeriph_Driver/src/stm32f10x_wwdg.c
......@@ -30,11 +34,30 @@ STM32F10x_StdPeriph_Driver/src/stm32f10x_cec.c
STM32F10x_StdPeriph_Driver/src/misc.c
""")
path = [RTT_ROOT + '/bsp/stm3210/Libraries/STM32F10x_StdPeriph_Driver/inc',
RTT_ROOT + '/bsp/stm3210/Libraries/CMSIS/CM3/CoreSupport',
RTT_ROOT + '/bsp/stm3210/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x']
# starupt scripts for each STM32 kind
startup_scripts = {}
startup_scripts['STM32F10X_CL'] = 'startup_stm32f10x_cl.s'
startup_scripts['STM32F10X_HD'] = 'startup_stm32f10x_hd.s'
startup_scripts['STM32F10X_HD_VL'] = 'startup_stm32f10x_hd_vl.s'
startup_scripts['STM32F10X_LD'] = 'startup_stm32f10x_ld.s'
startup_scripts['STM32F10X_LD_VL'] = 'startup_stm32f10x_ld_vl.s'
startup_scripts['STM32F10X_MD'] = 'startup_stm32f10x_md.s'
startup_scripts['STM32F10X_MD_VL'] = 'startup_stm32f10x_md_vl.s'
startup_scripts['STM32F10X_XL'] = 'startup_stm32f10x_xl.s'
# add for startup script
if rtconfig.CROSS_TOOL == 'gcc':
src = src + ['CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/' + startup_scripts[rtconfig.STM32_TYPE]]
elif rtconfig.CROSS_TOOL == 'keil':
src = src + ['CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/' + startup_scripts[rtconfig.STM32_TYPE]]
elif rtconfig.CROSS_TOOL == 'iar':
src = src + ['CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/' + startup_scripts[rtconfig.STM32_TYPE]]
path = [cwd + '/STM32F10x_StdPeriph_Driver/inc',
cwd + '/CMSIS/CM3/CoreSupport',
cwd + '/CMSIS/CM3/DeviceSupport/ST/STM32F10x']
CPPDEFINES = ['USE_STDPERIPH_DRIVER', rtconfig.STM32_TYPE]
group = DefineGroup('STM32_StdPeriph', src, depend = [''], CPPPATH = path)
group = DefineGroup('STM32_StdPeriph', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES)
Return('group')
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/misc.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file misc.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the miscellaneous
* firmware library functions (add-on to CMSIS functions).
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __MISC_H
......@@ -216,4 +217,4 @@ void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_adc.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_adc.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the ADC firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_ADC_H
......@@ -479,4 +480,4 @@ void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_bkp.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_bkp.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the BKP firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_BKP_H
......@@ -191,4 +192,4 @@ void BKP_ClearITPendingBit(void);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_cec.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_cec.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the CEC firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_CEC_H
......@@ -101,7 +102,7 @@ typedef struct
*/
/** @defgroup CEC_Own_Addres
/** @defgroup CEC_Own_Address
* @{
*/
#define IS_CEC_ADDRESS(ADDRESS) ((ADDRESS) < 0x10)
......@@ -206,4 +207,4 @@ void CEC_ClearITPendingBit(uint16_t CEC_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_crc.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_crc.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the CRC firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_CRC_H
......@@ -90,4 +91,4 @@ uint8_t CRC_GetIDRegister(void);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dac.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_dac.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the DAC firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_DAC_H
......@@ -200,7 +201,7 @@ typedef struct
* @}
*/
/** @defgroup DAC_data_alignement
/** @defgroup DAC_data_alignment
* @{
*/
......@@ -313,4 +314,4 @@ void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dbgmcu.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_dbgmcu.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the DBGMCU
* firmware library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_DBGMCU_H
......@@ -115,4 +116,4 @@ void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dma.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_dma.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the DMA firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_DMA_H
......@@ -413,10 +414,10 @@ void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState);
void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState);
void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber);
uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx);
FlagStatus DMA_GetFlagStatus(uint32_t DMA_FLAG);
void DMA_ClearFlag(uint32_t DMA_FLAG);
ITStatus DMA_GetITStatus(uint32_t DMA_IT);
void DMA_ClearITPendingBit(uint32_t DMA_IT);
FlagStatus DMA_GetFlagStatus(uint32_t DMAy_FLAG);
void DMA_ClearFlag(uint32_t DMAy_FLAG);
ITStatus DMA_GetITStatus(uint32_t DMAy_IT);
void DMA_ClearITPendingBit(uint32_t DMAy_IT);
#ifdef __cplusplus
}
......@@ -435,4 +436,4 @@ void DMA_ClearITPendingBit(uint32_t DMA_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_exti.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_exti.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the EXTI firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_EXTI_H
......@@ -180,4 +181,4 @@ void EXTI_ClearITPendingBit(uint32_t EXTI_Line);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_flash.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_flash.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the FLASH
* firmware library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_FLASH_H
......@@ -422,4 +423,4 @@ FLASH_Status FLASH_BootConfig(uint16_t FLASH_BOOT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_fsmc.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_fsmc.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the FSMC firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_FSMC_H
......@@ -76,7 +77,7 @@ typedef struct
to the memory before getting the first data.
The value of this parameter depends on the memory type as shown below:
- It must be set to 0 in case of a CRAM
- It is don’t care in asynchronous NOR, SRAM or ROM accesses
- It is don't care in asynchronous NOR, SRAM or ROM accesses
- It may assume a value between 0 and 0xF in NOR Flash memories
with synchronous burst mode enable */
......@@ -729,4 +730,4 @@ void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_gpio.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_gpio.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the GPIO
* firmware library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_GPIO_H
......@@ -195,7 +196,7 @@ typedef enum
#define GPIO_Remap_SWJ_NoJTRST ((uint32_t)0x00300100) /*!< Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST */
#define GPIO_Remap_SWJ_JTAGDisable ((uint32_t)0x00300200) /*!< JTAG-DP Disabled and SW-DP Enabled */
#define GPIO_Remap_SWJ_Disable ((uint32_t)0x00300400) /*!< Full SWJ Disabled (JTAG-DP + SW-DP) */
#define GPIO_Remap_SPI3 ((uint32_t)0x00201000) /*!< SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices) */
#define GPIO_Remap_SPI3 ((uint32_t)0x00201100) /*!< SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices) */
#define GPIO_Remap_TIM2ITR1_PTP_SOF ((uint32_t)0x00202000) /*!< Ethernet PTP output or USB OTG SOF (Start of Frame) connected
to TIM2 Internal Trigger 1 for calibration
(only for Connectivity line devices) */
......@@ -381,4 +382,4 @@ void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_i2c.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_i2c.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the I2C firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_I2C_H
......@@ -190,6 +191,18 @@ typedef struct
* @}
*/
/** @defgroup I2C_NCAK_position
* @{
*/
#define I2C_NACKPosition_Next ((uint16_t)0x0800)
#define I2C_NACKPosition_Current ((uint16_t)0xF7FF)
#define IS_I2C_NACK_POSITION(POSITION) (((POSITION) == I2C_NACKPosition_Next) || \
((POSITION) == I2C_NACKPosition_Current))
/**
* @}
*/
/** @defgroup I2C_interrupts_definition
* @{
*/
......@@ -433,7 +446,7 @@ typedef struct
* the end of the byte transmission. The two events I2C_EVENT_SLAVE_BYTE_TRANSMITTED and
* I2C_EVENT_SLAVE_BYTE_TRANSMITTING are similar. The second one can optionally be
* used when the user software doesn't guarantee the EV3 is managed before the
* current byte end of tranfer.
* current byte end of transfer.
* - EV3_2: When the master sends a NACK in order to tell slave that data transmission
* shall end (before sending the STOP condition). In this case slave has to stop sending
* data bytes and expect a Stop condition on the bus.
......@@ -536,6 +549,7 @@ uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx);
void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction);
uint16_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register);
void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
void I2C_NACKPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_NACKPosition);
void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, uint16_t I2C_SMBusAlert);
void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState);
void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition);
......@@ -577,10 +591,10 @@ void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle);
* @note
* For error management, it is advised to use the following functions:
* - I2C_ITConfig() to configure and enable the error interrupts (I2C_IT_ERR).
* - I2Cx_ER_IRQHandler() which is called when the error interurpt occurs.
* - I2Cx_ER_IRQHandler() which is called when the error interrupt occurs.
* Where x is the peripheral instance (I2C1, I2C2 ...)
* - I2C_GetFlagStatus() or I2C_GetITStatus() to be called into I2Cx_ER_IRQHandler()
* in order to determine which error occured.
* in order to determine which error occurred.
* - I2C_ClearFlag() or I2C_ClearITPendingBit() and/or I2C_SoftwareResetCmd()
* and/or I2C_GenerateStop() in order to clear the error flag and source,
* and return to correct communication status.
......@@ -667,4 +681,4 @@ void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_iwdg.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_iwdg.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the IWDG
* firmware library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_IWDG_H
......@@ -136,4 +137,4 @@ FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_pwr.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_pwr.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the PWR firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_PWR_H
......@@ -152,4 +153,4 @@ void PWR_ClearFlag(uint32_t PWR_FLAG);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rcc.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_rcc.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the RCC firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_RCC_H
......@@ -723,4 +724,4 @@ void RCC_ClearITPendingBit(uint8_t RCC_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rtc.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_rtc.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the RTC firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_RTC_H
......@@ -131,4 +132,4 @@ void RTC_ClearITPendingBit(uint16_t RTC_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_sdio.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_sdio.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the SDIO firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_SDIO_H
......@@ -189,7 +190,7 @@ typedef struct
*/
/** @defgroup SDIO_Interrupt_soucres
/** @defgroup SDIO_Interrupt_sources
* @{
*/
......@@ -527,4 +528,4 @@ void SDIO_ClearITPendingBit(uint32_t SDIO_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_spi.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_spi.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the SPI firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_SPI_H
......@@ -339,7 +340,7 @@ typedef struct
* @}
*/
/** @defgroup SPI_NSS_internal_software_mangement
/** @defgroup SPI_NSS_internal_software_management
* @{
*/
......@@ -483,4 +484,4 @@ void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_tim.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_tim.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the TIM firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_TIM_H
......@@ -44,7 +45,7 @@
/**
* @brief TIM Time Base Init structure definition
* @note This sturcture is used with all TIMx except for TIM6 and TIM7.
* @note This structure is used with all TIMx except for TIM6 and TIM7.
*/
typedef struct
......@@ -132,7 +133,7 @@ typedef struct
/**
* @brief BDTR structure definition
* @note This sturcture is used only with TIM1 and TIM8.
* @note This structure is used only with TIM1 and TIM8.
*/
typedef struct
......@@ -669,42 +670,42 @@ typedef struct
* @{
*/
#define TIM_DMABurstLength_1Byte ((uint16_t)0x0000)
#define TIM_DMABurstLength_2Bytes ((uint16_t)0x0100)
#define TIM_DMABurstLength_3Bytes ((uint16_t)0x0200)
#define TIM_DMABurstLength_4Bytes ((uint16_t)0x0300)
#define TIM_DMABurstLength_5Bytes ((uint16_t)0x0400)
#define TIM_DMABurstLength_6Bytes ((uint16_t)0x0500)
#define TIM_DMABurstLength_7Bytes ((uint16_t)0x0600)
#define TIM_DMABurstLength_8Bytes ((uint16_t)0x0700)
#define TIM_DMABurstLength_9Bytes ((uint16_t)0x0800)
#define TIM_DMABurstLength_10Bytes ((uint16_t)0x0900)
#define TIM_DMABurstLength_11Bytes ((uint16_t)0x0A00)
#define TIM_DMABurstLength_12Bytes ((uint16_t)0x0B00)
#define TIM_DMABurstLength_13Bytes ((uint16_t)0x0C00)
#define TIM_DMABurstLength_14Bytes ((uint16_t)0x0D00)
#define TIM_DMABurstLength_15Bytes ((uint16_t)0x0E00)
#define TIM_DMABurstLength_16Bytes ((uint16_t)0x0F00)
#define TIM_DMABurstLength_17Bytes ((uint16_t)0x1000)
#define TIM_DMABurstLength_18Bytes ((uint16_t)0x1100)
#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABurstLength_1Byte) || \
((LENGTH) == TIM_DMABurstLength_2Bytes) || \
((LENGTH) == TIM_DMABurstLength_3Bytes) || \
((LENGTH) == TIM_DMABurstLength_4Bytes) || \
((LENGTH) == TIM_DMABurstLength_5Bytes) || \
((LENGTH) == TIM_DMABurstLength_6Bytes) || \
((LENGTH) == TIM_DMABurstLength_7Bytes) || \
((LENGTH) == TIM_DMABurstLength_8Bytes) || \
((LENGTH) == TIM_DMABurstLength_9Bytes) || \
((LENGTH) == TIM_DMABurstLength_10Bytes) || \
((LENGTH) == TIM_DMABurstLength_11Bytes) || \
((LENGTH) == TIM_DMABurstLength_12Bytes) || \
((LENGTH) == TIM_DMABurstLength_13Bytes) || \
((LENGTH) == TIM_DMABurstLength_14Bytes) || \
((LENGTH) == TIM_DMABurstLength_15Bytes) || \
((LENGTH) == TIM_DMABurstLength_16Bytes) || \
((LENGTH) == TIM_DMABurstLength_17Bytes) || \
((LENGTH) == TIM_DMABurstLength_18Bytes))
#define TIM_DMABurstLength_1Transfer ((uint16_t)0x0000)
#define TIM_DMABurstLength_2Transfers ((uint16_t)0x0100)
#define TIM_DMABurstLength_3Transfers ((uint16_t)0x0200)
#define TIM_DMABurstLength_4Transfers ((uint16_t)0x0300)
#define TIM_DMABurstLength_5Transfers ((uint16_t)0x0400)
#define TIM_DMABurstLength_6Transfers ((uint16_t)0x0500)
#define TIM_DMABurstLength_7Transfers ((uint16_t)0x0600)
#define TIM_DMABurstLength_8Transfers ((uint16_t)0x0700)
#define TIM_DMABurstLength_9Transfers ((uint16_t)0x0800)
#define TIM_DMABurstLength_10Transfers ((uint16_t)0x0900)
#define TIM_DMABurstLength_11Transfers ((uint16_t)0x0A00)
#define TIM_DMABurstLength_12Transfers ((uint16_t)0x0B00)
#define TIM_DMABurstLength_13Transfers ((uint16_t)0x0C00)
#define TIM_DMABurstLength_14Transfers ((uint16_t)0x0D00)
#define TIM_DMABurstLength_15Transfers ((uint16_t)0x0E00)
#define TIM_DMABurstLength_16Transfers ((uint16_t)0x0F00)
#define TIM_DMABurstLength_17Transfers ((uint16_t)0x1000)
#define TIM_DMABurstLength_18Transfers ((uint16_t)0x1100)
#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABurstLength_1Transfer) || \
((LENGTH) == TIM_DMABurstLength_2Transfers) || \
((LENGTH) == TIM_DMABurstLength_3Transfers) || \
((LENGTH) == TIM_DMABurstLength_4Transfers) || \
((LENGTH) == TIM_DMABurstLength_5Transfers) || \
((LENGTH) == TIM_DMABurstLength_6Transfers) || \
((LENGTH) == TIM_DMABurstLength_7Transfers) || \
((LENGTH) == TIM_DMABurstLength_8Transfers) || \
((LENGTH) == TIM_DMABurstLength_9Transfers) || \
((LENGTH) == TIM_DMABurstLength_10Transfers) || \
((LENGTH) == TIM_DMABurstLength_11Transfers) || \
((LENGTH) == TIM_DMABurstLength_12Transfers) || \
((LENGTH) == TIM_DMABurstLength_13Transfers) || \
((LENGTH) == TIM_DMABurstLength_14Transfers) || \
((LENGTH) == TIM_DMABurstLength_15Transfers) || \
((LENGTH) == TIM_DMABurstLength_16Transfers) || \
((LENGTH) == TIM_DMABurstLength_17Transfers) || \
((LENGTH) == TIM_DMABurstLength_18Transfers))
/**
* @}
*/
......@@ -866,7 +867,7 @@ typedef struct
* @}
*/
/** @defgroup TIM_Ouput_Compare_Preload_State
/** @defgroup TIM_Output_Compare_Preload_State
* @{
*/
......@@ -878,7 +879,7 @@ typedef struct
* @}
*/
/** @defgroup TIM_Ouput_Compare_Fast_State
/** @defgroup TIM_Output_Compare_Fast_State
* @{
*/
......@@ -891,7 +892,7 @@ typedef struct
* @}
*/
/** @defgroup TIM_Ouput_Compare_Clear_State
/** @defgroup TIM_Output_Compare_Clear_State
* @{
*/
......@@ -1008,6 +1009,32 @@ typedef struct
* @}
*/
/** @defgroup TIM_Legacy
* @{
*/
#define TIM_DMABurstLength_1Byte TIM_DMABurstLength_1Transfer
#define TIM_DMABurstLength_2Bytes TIM_DMABurstLength_2Transfers
#define TIM_DMABurstLength_3Bytes TIM_DMABurstLength_3Transfers
#define TIM_DMABurstLength_4Bytes TIM_DMABurstLength_4Transfers
#define TIM_DMABurstLength_5Bytes TIM_DMABurstLength_5Transfers
#define TIM_DMABurstLength_6Bytes TIM_DMABurstLength_6Transfers
#define TIM_DMABurstLength_7Bytes TIM_DMABurstLength_7Transfers
#define TIM_DMABurstLength_8Bytes TIM_DMABurstLength_8Transfers
#define TIM_DMABurstLength_9Bytes TIM_DMABurstLength_9Transfers
#define TIM_DMABurstLength_10Bytes TIM_DMABurstLength_10Transfers
#define TIM_DMABurstLength_11Bytes TIM_DMABurstLength_11Transfers
#define TIM_DMABurstLength_12Bytes TIM_DMABurstLength_12Transfers
#define TIM_DMABurstLength_13Bytes TIM_DMABurstLength_13Transfers
#define TIM_DMABurstLength_14Bytes TIM_DMABurstLength_14Transfers
#define TIM_DMABurstLength_15Bytes TIM_DMABurstLength_15Transfers
#define TIM_DMABurstLength_16Bytes TIM_DMABurstLength_16Transfers
#define TIM_DMABurstLength_17Bytes TIM_DMABurstLength_17Transfers
#define TIM_DMABurstLength_18Bytes TIM_DMABurstLength_18Transfers
/**
* @}
*/
/**
* @}
*/
......@@ -1134,4 +1161,4 @@ void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_usart.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_usart.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the USART
* firmware library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_USART_H
......@@ -408,4 +409,4 @@ void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_wwdg.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_wwdg.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the WWDG firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_WWDG_H
......@@ -111,4 +112,4 @@ void WWDG_ClearFlag(void);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/misc.c
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file misc.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the miscellaneous firmware functions (add-on
* to CMSIS functions).
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,8 +16,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "misc.h"
......@@ -103,9 +104,9 @@ void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup)
/**
* @brief Initializes the NVIC peripheral according to the specified
* parameters in the NVIC_InitStruct.
* parameters in the NVIC_InitStruct.
* @param NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains
* the configuration information for the specified NVIC peripheral.
* the configuration information for the specified NVIC peripheral.
* @retval None
*/
void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct)
......@@ -148,7 +149,8 @@ void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct)
* This parameter can be one of the following values:
* @arg NVIC_VectTab_RAM
* @arg NVIC_VectTab_FLASH
* @param Offset: Vector Table base offset field. This value must be a multiple of 0x100.
* @param Offset: Vector Table base offset field. This value must be a multiple
* of 0x200.
* @retval None
*/
void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset)
......@@ -220,4 +222,4 @@ void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_adc.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_adc.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the ADC firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,8 +15,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_adc.h"
......@@ -208,10 +209,10 @@ void ADC_DeInit(ADC_TypeDef* ADCx)
/**
* @brief Initializes the ADCx peripheral according to the specified parameters
* in the ADC_InitStruct.
* in the ADC_InitStruct.
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
* @param ADC_InitStruct: pointer to an ADC_InitTypeDef structure that contains
* the configuration information for the specified ADC peripheral.
* the configuration information for the specified ADC peripheral.
* @retval None
*/
void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct)
......@@ -379,7 +380,7 @@ void ADC_ResetCalibration(ADC_TypeDef* ADCx)
{
/* Check the parameters */
assert_param(IS_ADC_ALL_PERIPH(ADCx));
/* Resets the selected ADC calibartion registers */
/* Resets the selected ADC calibration registers */
ADCx->CR2 |= CR2_RSTCAL_Set;
}
......@@ -499,10 +500,10 @@ FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx)
/**
* @brief Configures the discontinuous mode for the selected ADC regular
* group channel.
* group channel.
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
* @param Number: specifies the discontinuous mode regular channel
* count value. This number must be between 1 and 8.
* count value. This number must be between 1 and 8.
* @retval None
*/
void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number)
......@@ -525,11 +526,11 @@ void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number)
/**
* @brief Enables or disables the discontinuous mode on regular group
* channel for the specified ADC
* channel for the specified ADC
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
* @param NewState: new state of the selected ADC discontinuous mode
* on regular group channel.
* This parameter can be: ENABLE or DISABLE.
* on regular group channel.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
......@@ -551,7 +552,7 @@ void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
/**
* @brief Configures for the selected ADC regular channel its corresponding
* rank in the sequencer and its sample time.
* rank in the sequencer and its sample time.
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
* @param ADC_Channel: the ADC channel to configure.
* This parameter can be one of the following values:
......@@ -724,7 +725,7 @@ uint32_t ADC_GetDualModeConversionValue(void)
/**
* @brief Enables or disables the selected ADC automatic injected group
* conversion after regular one.
* conversion after regular one.
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
* @param NewState: new state of the selected ADC auto injected conversion
* This parameter can be: ENABLE or DISABLE.
......@@ -749,10 +750,10 @@ void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
/**
* @brief Enables or disables the discontinuous mode for injected group
* channel for the specified ADC
* channel for the specified ADC
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
* @param NewState: new state of the selected ADC discontinuous mode
* on injected group channel.
* on injected group channel.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
......@@ -813,10 +814,10 @@ void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_External
/**
* @brief Enables or disables the ADCx injected channels conversion through
* external trigger
* external trigger
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
* @param NewState: new state of the selected ADC external trigger start of
* injected conversion.
* injected conversion.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
......@@ -839,7 +840,7 @@ void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState
/**
* @brief Enables or disables the selected ADC start of the injected
* channels conversion.
* channels conversion.
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
* @param NewState: new state of the selected ADC software start injected conversion.
* This parameter can be: ENABLE or DISABLE.
......@@ -891,7 +892,7 @@ FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx)
/**
* @brief Configures for the selected ADC injected channel its corresponding
* rank in the sequencer and its sample time.
* rank in the sequencer and its sample time.
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
* @param ADC_Channel: the ADC channel to configure.
* This parameter can be one of the following values:
......@@ -1065,7 +1066,7 @@ uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedC
/**
* @brief Enables or disables the analog watchdog on single/all regular
* or injected channels
* or injected channels
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
* @param ADC_AnalogWatchdog: the ADC analog watchdog configuration.
* This parameter can be one of the following values:
......@@ -1270,7 +1271,7 @@ ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT)
}
/**
* @brief Clears the ADCxs interrupt pending bits.
* @brief Clears the ADCx's interrupt pending bits.
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
* @param ADC_IT: specifies the ADC interrupt pending bit to clear.
* This parameter can be any combination of the following values:
......@@ -1303,4 +1304,4 @@ void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_bkp.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_bkp.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the BKP firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,8 +15,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_bkp.h"
......@@ -304,4 +305,4 @@ void BKP_ClearITPendingBit(void)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_cec.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_cec.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the CEC firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,8 +15,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_cec.h"
......@@ -277,7 +278,7 @@ void CEC_EndOfMessageCmd(FunctionalState NewState)
* @arg CEC_FLAG_SBE: Start Bit Error
* @arg CEC_FLAG_ACKE: Block Acknowledge Error
* @arg CEC_FLAG_LINE: Line Error
* @arg CEC_FLAG_TBTFE: Tx Block Transfer Finsihed Error
* @arg CEC_FLAG_TBTFE: Tx Block Transfer Finished Error
* @arg CEC_FLAG_TEOM: Tx End Of Message
* @arg CEC_FLAG_TERR: Tx Error
* @arg CEC_FLAG_TBTRF: Tx Byte Transfer Request or Block Transfer Finished
......@@ -429,4 +430,4 @@ void CEC_ClearITPendingBit(uint16_t CEC_IT)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_crc.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_crc.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the CRC firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,8 +15,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_crc.h"
......@@ -156,4 +157,4 @@ uint8_t CRC_GetIDRegister(void)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dac.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_dac.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the DAC firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,8 +15,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_dac.h"
......@@ -104,13 +105,13 @@ void DAC_DeInit(void)
/**
* @brief Initializes the DAC peripheral according to the specified
* parameters in the DAC_InitStruct.
* parameters in the DAC_InitStruct.
* @param DAC_Channel: the selected DAC channel.
* This parameter can be one of the following values:
* @arg DAC_Channel_1: DAC Channel1 selected
* @arg DAC_Channel_2: DAC Channel2 selected
* @param DAC_InitStruct: pointer to a DAC_InitTypeDef structure that
* contains the configuration information for the specified DAC channel.
* contains the configuration information for the specified DAC channel.
* @retval None
*/
void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct)
......@@ -126,8 +127,8 @@ void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct)
tmpreg1 = DAC->CR;
/* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */
tmpreg1 &= ~(CR_CLEAR_MASK << DAC_Channel);
/* Configure for the selected DAC channel: buffer output, trigger, wave genration,
mask/amplitude for wave genration */
/* Configure for the selected DAC channel: buffer output, trigger, wave generation,
mask/amplitude for wave generation */
/* Set TSELx and TENx bits according to DAC_Trigger value */
/* Set WAVEx bits according to DAC_WaveGeneration value */
/* Set MAMPx bits according to DAC_LFSRUnmask_TriangleAmplitude value */
......@@ -143,7 +144,7 @@ void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct)
/**
* @brief Fills each DAC_InitStruct member with its default value.
* @param DAC_InitStruct : pointer to a DAC_InitTypeDef structure which will
* be initialized.
* be initialized.
* @retval None
*/
void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct)
......@@ -330,11 +331,11 @@ void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalSt
/**
* @brief Set the specified data holding register value for DAC channel1.
* @param DAC_Align: Specifies the data alignement for DAC channel1.
* @param DAC_Align: Specifies the data alignment for DAC channel1.
* This parameter can be one of the following values:
* @arg DAC_Align_8b_R: 8bit right data alignement selected
* @arg DAC_Align_12b_L: 12bit left data alignement selected
* @arg DAC_Align_12b_R: 12bit right data alignement selected
* @arg DAC_Align_8b_R: 8bit right data alignment selected
* @arg DAC_Align_12b_L: 12bit left data alignment selected
* @arg DAC_Align_12b_R: 12bit right data alignment selected
* @param Data : Data to be loaded in the selected data holding register.
* @retval None
*/
......@@ -355,11 +356,11 @@ void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data)
/**
* @brief Set the specified data holding register value for DAC channel2.
* @param DAC_Align: Specifies the data alignement for DAC channel2.
* @param DAC_Align: Specifies the data alignment for DAC channel2.
* This parameter can be one of the following values:
* @arg DAC_Align_8b_R: 8bit right data alignement selected
* @arg DAC_Align_12b_L: 12bit left data alignement selected
* @arg DAC_Align_12b_R: 12bit right data alignement selected
* @arg DAC_Align_8b_R: 8bit right data alignment selected
* @arg DAC_Align_12b_L: 12bit left data alignment selected
* @arg DAC_Align_12b_R: 12bit right data alignment selected
* @param Data : Data to be loaded in the selected data holding register.
* @retval None
*/
......@@ -381,11 +382,11 @@ void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data)
/**
* @brief Set the specified data holding register value for dual channel
* DAC.
* @param DAC_Align: Specifies the data alignement for dual channel DAC.
* @param DAC_Align: Specifies the data alignment for dual channel DAC.
* This parameter can be one of the following values:
* @arg DAC_Align_8b_R: 8bit right data alignement selected
* @arg DAC_Align_12b_L: 12bit left data alignement selected
* @arg DAC_Align_12b_R: 12bit right data alignement selected
* @arg DAC_Align_8b_R: 8bit right data alignment selected
* @arg DAC_Align_12b_L: 12bit left data alignment selected
* @arg DAC_Align_12b_R: 12bit right data alignment selected
* @param Data2: Data for DAC Channel2 to be loaded in the selected data
* holding register.
* @param Data1: Data for DAC Channel1 to be loaded in the selected data
......@@ -419,7 +420,7 @@ void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1)
}
/**
* @brief Returns the last data output value of the selected DAC cahnnel.
* @brief Returns the last data output value of the selected DAC channel.
* @param DAC_Channel: the selected DAC channel.
* This parameter can be one of the following values:
* @arg DAC_Channel_1: DAC Channel1 selected
......@@ -534,7 +535,7 @@ ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT)
}
/**
* @brief Clears the DAC channelxs interrupt pending bits.
* @brief Clears the DAC channelx's interrupt pending bits.
* @param DAC_Channel: the selected DAC channel.
* This parameter can be one of the following values:
* @arg DAC_Channel_1: DAC Channel1 selected
......@@ -567,4 +568,4 @@ void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dbgmcu.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_dbgmcu.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the DBGMCU firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,8 +15,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_dbgmcu.h"
......@@ -158,4 +159,4 @@ void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dma.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_dma.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the DMA firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,8 +15,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_dma.h"
......@@ -99,7 +100,7 @@
/**
* @brief Deinitializes the DMAy Channelx registers to their default reset
* values.
* values.
* @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and
* x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
* @retval None
......@@ -191,11 +192,11 @@ void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx)
/**
* @brief Initializes the DMAy Channelx according to the specified
* parameters in the DMA_InitStruct.
* parameters in the DMA_InitStruct.
* @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and
* x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
* @param DMA_InitStruct: pointer to a DMA_InitTypeDef structure that
* contains the configuration information for the specified DMA Channel.
* contains the configuration information for the specified DMA Channel.
* @retval None
*/
void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct)
......@@ -252,7 +253,7 @@ void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruc
/**
* @brief Fills each DMA_InitStruct member with its default value.
* @param DMA_InitStruct : pointer to a DMA_InitTypeDef structure which will
* be initialized.
* be initialized.
* @retval None
*/
void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct)
......@@ -361,11 +362,11 @@ void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNum
/**
* @brief Returns the number of remaining data units in the current
* DMAy Channelx transfer.
* DMAy Channelx transfer.
* @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and
* x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
* @retval The number of remaining data units in the current DMAy Channelx
* transfer.
* transfer.
*/
uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx)
{
......@@ -377,7 +378,7 @@ uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx)
/**
* @brief Checks whether the specified DMAy Channelx flag is set or not.
* @param DMA_FLAG: specifies the flag to check.
* @param DMAy_FLAG: specifies the flag to check.
* This parameter can be one of the following values:
* @arg DMA1_FLAG_GL1: DMA1 Channel1 global flag.
* @arg DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag.
......@@ -427,17 +428,18 @@ uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx)
* @arg DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag.
* @arg DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag.
* @arg DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag.
* @retval The new state of DMA_FLAG (SET or RESET).
* @retval The new state of DMAy_FLAG (SET or RESET).
*/
FlagStatus DMA_GetFlagStatus(uint32_t DMA_FLAG)
FlagStatus DMA_GetFlagStatus(uint32_t DMAy_FLAG)
{
FlagStatus bitstatus = RESET;
uint32_t tmpreg = 0;
/* Check the parameters */
assert_param(IS_DMA_GET_FLAG(DMA_FLAG));
assert_param(IS_DMA_GET_FLAG(DMAy_FLAG));
/* Calculate the used DMA */
if ((DMA_FLAG & FLAG_Mask) != (uint32_t)RESET)
/* Calculate the used DMAy */
if ((DMAy_FLAG & FLAG_Mask) != (uint32_t)RESET)
{
/* Get DMA2 ISR register value */
tmpreg = DMA2->ISR ;
......@@ -448,25 +450,25 @@ FlagStatus DMA_GetFlagStatus(uint32_t DMA_FLAG)
tmpreg = DMA1->ISR ;
}
/* Check the status of the specified DMA flag */
if ((tmpreg & DMA_FLAG) != (uint32_t)RESET)
/* Check the status of the specified DMAy flag */
if ((tmpreg & DMAy_FLAG) != (uint32_t)RESET)
{
/* DMA_FLAG is set */
/* DMAy_FLAG is set */
bitstatus = SET;
}
else
{
/* DMA_FLAG is reset */
/* DMAy_FLAG is reset */
bitstatus = RESET;
}
/* Return the DMA_FLAG status */
/* Return the DMAy_FLAG status */
return bitstatus;
}
/**
* @brief Clears the DMAy Channelx's pending flags.
* @param DMA_FLAG: specifies the flag to clear.
* @param DMAy_FLAG: specifies the flag to clear.
* This parameter can be any combination (for the same DMA) of the following values:
* @arg DMA1_FLAG_GL1: DMA1 Channel1 global flag.
* @arg DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag.
......@@ -518,27 +520,27 @@ FlagStatus DMA_GetFlagStatus(uint32_t DMA_FLAG)
* @arg DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag.
* @retval None
*/
void DMA_ClearFlag(uint32_t DMA_FLAG)
void DMA_ClearFlag(uint32_t DMAy_FLAG)
{
/* Check the parameters */
assert_param(IS_DMA_CLEAR_FLAG(DMA_FLAG));
/* Calculate the used DMA */
assert_param(IS_DMA_CLEAR_FLAG(DMAy_FLAG));
if ((DMA_FLAG & FLAG_Mask) != (uint32_t)RESET)
/* Calculate the used DMAy */
if ((DMAy_FLAG & FLAG_Mask) != (uint32_t)RESET)
{
/* Clear the selected DMA flags */
DMA2->IFCR = DMA_FLAG;
/* Clear the selected DMAy flags */
DMA2->IFCR = DMAy_FLAG;
}
else
{
/* Clear the selected DMA flags */
DMA1->IFCR = DMA_FLAG;
/* Clear the selected DMAy flags */
DMA1->IFCR = DMAy_FLAG;
}
}
/**
* @brief Checks whether the specified DMAy Channelx interrupt has occurred or not.
* @param DMA_IT: specifies the DMA interrupt source to check.
* @param DMAy_IT: specifies the DMAy interrupt source to check.
* This parameter can be one of the following values:
* @arg DMA1_IT_GL1: DMA1 Channel1 global interrupt.
* @arg DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt.
......@@ -588,36 +590,37 @@ void DMA_ClearFlag(uint32_t DMA_FLAG)
* @arg DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt.
* @arg DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt.
* @arg DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt.
* @retval The new state of DMA_IT (SET or RESET).
* @retval The new state of DMAy_IT (SET or RESET).
*/
ITStatus DMA_GetITStatus(uint32_t DMA_IT)
ITStatus DMA_GetITStatus(uint32_t DMAy_IT)
{
ITStatus bitstatus = RESET;
uint32_t tmpreg = 0;
/* Check the parameters */
assert_param(IS_DMA_GET_IT(DMA_IT));
assert_param(IS_DMA_GET_IT(DMAy_IT));
/* Calculate the used DMA */
if ((DMA_IT & FLAG_Mask) != (uint32_t)RESET)
if ((DMAy_IT & FLAG_Mask) != (uint32_t)RESET)
{
/* Get DMA2 ISR register value */
tmpreg = DMA2->ISR ;
tmpreg = DMA2->ISR;
}
else
{
/* Get DMA1 ISR register value */
tmpreg = DMA1->ISR ;
tmpreg = DMA1->ISR;
}
/* Check the status of the specified DMA interrupt */
if ((tmpreg & DMA_IT) != (uint32_t)RESET)
/* Check the status of the specified DMAy interrupt */
if ((tmpreg & DMAy_IT) != (uint32_t)RESET)
{
/* DMA_IT is set */
/* DMAy_IT is set */
bitstatus = SET;
}
else
{
/* DMA_IT is reset */
/* DMAy_IT is reset */
bitstatus = RESET;
}
/* Return the DMA_IT status */
......@@ -625,8 +628,8 @@ ITStatus DMA_GetITStatus(uint32_t DMA_IT)
}
/**
* @brief Clears the DMAy Channelxs interrupt pending bits.
* @param DMA_IT: specifies the DMA interrupt pending bit to clear.
* @brief Clears the DMAy Channelx's interrupt pending bits.
* @param DMAy_IT: specifies the DMAy interrupt pending bit to clear.
* This parameter can be any combination (for the same DMA) of the following values:
* @arg DMA1_IT_GL1: DMA1 Channel1 global interrupt.
* @arg DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt.
......@@ -678,21 +681,21 @@ ITStatus DMA_GetITStatus(uint32_t DMA_IT)
* @arg DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt.
* @retval None
*/
void DMA_ClearITPendingBit(uint32_t DMA_IT)
void DMA_ClearITPendingBit(uint32_t DMAy_IT)
{
/* Check the parameters */
assert_param(IS_DMA_CLEAR_IT(DMA_IT));
assert_param(IS_DMA_CLEAR_IT(DMAy_IT));
/* Calculate the used DMA */
if ((DMA_IT & FLAG_Mask) != (uint32_t)RESET)
/* Calculate the used DMAy */
if ((DMAy_IT & FLAG_Mask) != (uint32_t)RESET)
{
/* Clear the selected DMA interrupt pending bits */
DMA2->IFCR = DMA_IT;
/* Clear the selected DMAy interrupt pending bits */
DMA2->IFCR = DMAy_IT;
}
else
{
/* Clear the selected DMA interrupt pending bits */
DMA1->IFCR = DMA_IT;
/* Clear the selected DMAy interrupt pending bits */
DMA1->IFCR = DMAy_IT;
}
}
......@@ -708,4 +711,4 @@ void DMA_ClearITPendingBit(uint32_t DMA_IT)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_exti.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_exti.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the EXTI firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,8 +15,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_exti.h"
......@@ -92,9 +93,9 @@ void EXTI_DeInit(void)
/**
* @brief Initializes the EXTI peripheral according to the specified
* parameters in the EXTI_InitStruct.
* parameters in the EXTI_InitStruct.
* @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure
* that contains the configuration information for the EXTI peripheral.
* that contains the configuration information for the EXTI peripheral.
* @retval None
*/
void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct)
......@@ -150,7 +151,7 @@ void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct)
/**
* @brief Fills each EXTI_InitStruct member with its reset value.
* @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure which will
* be initialized.
* be initialized.
* @retval None
*/
void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct)
......@@ -200,7 +201,7 @@ FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line)
}
/**
* @brief Clears the EXTIs line pending flags.
* @brief Clears the EXTI's line pending flags.
* @param EXTI_Line: specifies the EXTI lines flags to clear.
* This parameter can be any combination of EXTI_Linex where x can be (0..19).
* @retval None
......@@ -240,7 +241,7 @@ ITStatus EXTI_GetITStatus(uint32_t EXTI_Line)
}
/**
* @brief Clears the EXTIs line pending bits.
* @brief Clears the EXTI's line pending bits.
* @param EXTI_Line: specifies the EXTI lines to clear.
* This parameter can be any combination of EXTI_Linex where x can be (0..19).
* @retval None
......@@ -265,4 +266,4 @@ void EXTI_ClearITPendingBit(uint32_t EXTI_Line)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_fsmc.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_fsmc.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the FSMC firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,8 +15,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_fsmc.h"
......@@ -89,7 +90,7 @@
/**
* @brief Deinitializes the FSMC NOR/SRAM Banks registers to their default
* reset values.
* reset values.
* @param FSMC_Bank: specifies the FSMC Bank to be used
* This parameter can be one of the following values:
* @arg FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1
......@@ -166,10 +167,10 @@ void FSMC_PCCARDDeInit(void)
/**
* @brief Initializes the FSMC NOR/SRAM Banks according to the specified
* parameters in the FSMC_NORSRAMInitStruct.
* parameters in the FSMC_NORSRAMInitStruct.
* @param FSMC_NORSRAMInitStruct : pointer to a FSMC_NORSRAMInitTypeDef
* structure that contains the configuration information for
* the FSMC NOR/SRAM specified Banks.
* structure that contains the configuration information for
* the FSMC NOR/SRAM specified Banks.
* @retval None
*/
void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct)
......@@ -252,9 +253,10 @@ void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct)
/**
* @brief Initializes the FSMC NAND Banks according to the specified
* parameters in the FSMC_NANDInitStruct.
* parameters in the FSMC_NANDInitStruct.
* @param FSMC_NANDInitStruct : pointer to a FSMC_NANDInitTypeDef
* structure that contains the configuration information for the FSMC NAND specified Banks.
* structure that contains the configuration information for the FSMC
* NAND specified Banks.
* @retval None
*/
void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct)
......@@ -317,9 +319,10 @@ void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct)
/**
* @brief Initializes the FSMC PCCARD Bank according to the specified
* parameters in the FSMC_PCCARDInitStruct.
* parameters in the FSMC_PCCARDInitStruct.
* @param FSMC_PCCARDInitStruct : pointer to a FSMC_PCCARDInitTypeDef
* structure that contains the configuration information for the FSMC PCCARD Bank.
* structure that contains the configuration information for the FSMC
* PCCARD Bank.
* @retval None
*/
void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct)
......@@ -371,7 +374,7 @@ void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct)
/**
* @brief Fills each FSMC_NORSRAMInitStruct member with its default value.
* @param FSMC_NORSRAMInitStruct: pointer to a FSMC_NORSRAMInitTypeDef
* structure which will be initialized.
* structure which will be initialized.
* @retval None
*/
void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct)
......@@ -409,7 +412,7 @@ void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct)
/**
* @brief Fills each FSMC_NANDInitStruct member with its default value.
* @param FSMC_NANDInitStruct: pointer to a FSMC_NANDInitTypeDef
* structure which will be initialized.
* structure which will be initialized.
* @retval None
*/
void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct)
......@@ -435,7 +438,7 @@ void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct)
/**
* @brief Fills each FSMC_PCCARDInitStruct member with its default value.
* @param FSMC_PCCARDInitStruct: pointer to a FSMC_PCCARDInitTypeDef
* structure which will be initialized.
* structure which will be initialized.
* @retval None
*/
void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct)
......@@ -728,7 +731,7 @@ FlagStatus FSMC_GetFlagStatus(uint32_t FSMC_Bank, uint32_t FSMC_FLAG)
}
/**
* @brief Clears the FSMCs pending flags.
* @brief Clears the FSMC's pending flags.
* @param FSMC_Bank: specifies the FSMC Bank to be used
* This parameter can be one of the following values:
* @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
......@@ -814,7 +817,7 @@ ITStatus FSMC_GetITStatus(uint32_t FSMC_Bank, uint32_t FSMC_IT)
}
/**
* @brief Clears the FSMCs interrupt pending bits.
* @brief Clears the FSMC's interrupt pending bits.
* @param FSMC_Bank: specifies the FSMC Bank to be used
* This parameter can be one of the following values:
* @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
......@@ -860,4 +863,4 @@ void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_iwdg.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_iwdg.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the IWDG firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,8 +15,9 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
*/
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_iwdg.h"
......@@ -186,4 +187,4 @@ FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/SConscript
浏览文件 @ 3d4e5e1f
此差异已折叠。
bsp/stm32f107/project.uvopt
浏览文件 @ 3d4e5e1f
此差异已折叠。
bsp/stm32f107/project.uvproj
浏览文件 @ 3d4e5e1f
此差异已折叠。
bsp/stm32f107/rtconfig.h
浏览文件 @ 3d4e5e1f
此差异已折叠。
bsp/stm32f107/rtconfig.py
浏览文件 @ 3d4e5e1f
此差异已折叠。
bsp/stm32f107/stm32f10x_it.c
浏览文件 @ 3d4e5e1f
此差异已折叠。
bsp/stm32f107/system_stm32f10x.c 已删除 100644 → 0
浏览文件 @ 311e6695
此差异已折叠。
bsp/stm32f107/template.Uv2 已删除 100644 → 0
浏览文件 @ 311e6695
此差异已折叠。
bsp/stm32f107/template.uvopt 0 → 100644
浏览文件 @ 3d4e5e1f
此差异已折叠。
bsp/stm32f107/template.uvproj 0 → 100644
浏览文件 @ 3d4e5e1f
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或