Skip to content

R
rt-thread

在你之后 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 2
Star 0
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 3d4e5e1f 编写于 作者: B bernard.xiong@gmail.com
浏览文件
操作

update library to 3.5.0; update project file to Keil4. 

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1557 bbd45198-f89e-11dd-88c7-29a3b14d5316
上级 311e6695
展开全部 显示空白变更内容
内联 并排
Showing with 6175 addition and 6183 deletion
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_cl.s
浏览文件 @ 3d4e5e1f
......@@ -2,8 +2,8 @@
******************************************************************************
* @file startup_stm32f10x_cl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Connectivity line Devices vector table for Atollic
* toolchain.
* This module performs:
......@@ -16,8 +16,8 @@
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -26,7 +26,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
......@@ -469,4 +470,4 @@ g_pfnVectors:
.weak OTG_FS_IRQHandler
.thumb_set OTG_FS_IRQHandler ,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_hd.s
浏览文件 @ 3d4e5e1f
......@@ -2,8 +2,8 @@
******************************************************************************
* @file startup_stm32f10x_hd.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x High Density Devices vector table for Atollic toolchain.
* This module performs:
* - Set the initial SP
......@@ -16,8 +16,8 @@
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -26,7 +26,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
......@@ -465,4 +466,4 @@ g_pfnVectors:
.weak DMA2_Channel4_5_IRQHandler
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_hd_vl.s
浏览文件 @ 3d4e5e1f
......@@ -2,9 +2,10 @@
******************************************************************************
* @file startup_stm32f10x_hd_vl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x High Density Value Line Devices vector table for Atollic toolchain.
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x High Density Value Line Devices vector table for Atollic
* toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
......@@ -16,8 +17,8 @@
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -26,7 +27,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
......@@ -191,7 +193,7 @@ g_pfnVectors:
.word TIM14_IRQHandler
.word 0
.word 0
.word FSMC_IRQHandler
.word 0
.word 0
.word TIM5_IRQHandler
.word SPI3_IRQHandler
......@@ -412,9 +414,6 @@ g_pfnVectors:
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak FSMC_IRQHandler
.thumb_set FSMC_IRQHandler,Default_Handler
.weak TIM5_IRQHandler
.thumb_set TIM5_IRQHandler,Default_Handler
......@@ -448,5 +447,5 @@ g_pfnVectors:
.weak DMA2_Channel5_IRQHandler
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_ld.s
浏览文件 @ 3d4e5e1f
......@@ -2,8 +2,8 @@
******************************************************************************
* @file startup_stm32f10x_ld.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Low Density Devices vector table for Atollic toolchain.
* This module performs:
* - Set the initial SP
......@@ -14,8 +14,8 @@
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -24,7 +24,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
......@@ -343,4 +344,4 @@ g_pfnVectors:
.weak USBWakeUp_IRQHandler
.thumb_set USBWakeUp_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_ld_vl.s
浏览文件 @ 3d4e5e1f
......@@ -2,8 +2,8 @@
******************************************************************************
* @file startup_stm32f10x_ld_vl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Low Density Value Line Devices vector table for Atollic toolchain.
* This module performs:
* - Set the initial SP
......@@ -14,8 +14,8 @@
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -24,7 +24,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
......@@ -387,5 +388,5 @@ g_pfnVectors:
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_md.s
浏览文件 @ 3d4e5e1f
......@@ -2,8 +2,8 @@
******************************************************************************
* @file startup_stm32f10x_md.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Medium Density Devices vector table for Atollic toolchain.
* This module performs:
* - Set the initial SP
......@@ -14,8 +14,8 @@
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -24,7 +24,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
......@@ -358,5 +359,5 @@ g_pfnVectors:
.weak USBWakeUp_IRQHandler
.thumb_set USBWakeUp_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_md_vl.s
浏览文件 @ 3d4e5e1f
......@@ -2,9 +2,10 @@
******************************************************************************
* @file startup_stm32f10x_md_vl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @brief STM32F10x Medium Density Value Line Devices vector table for Atollic toolchain.
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Medium Density Value Line Devices vector table for Atollic
* toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
......@@ -14,8 +15,8 @@
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -24,7 +25,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
......@@ -402,5 +404,5 @@ g_pfnVectors:
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_xl.s
浏览文件 @ 3d4e5e1f
......@@ -2,8 +2,8 @@
******************************************************************************
* @file startup_stm32f10x_xl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x XL-Density Devices vector table for TrueSTUDIO toolchain.
* This module performs:
* - Set the initial SP
......@@ -16,8 +16,8 @@
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -26,7 +26,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
......@@ -463,4 +464,4 @@ g_pfnVectors:
.weak DMA2_Channel4_5_IRQHandler
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_cl.s
浏览文件 @ 3d4e5e1f
;******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_cl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Connectivity line devices vector table for MDK-ARM
;* toolchain.
;* This module performs:
......@@ -365,4 +365,4 @@ __user_initial_stackheap
END
;******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE*****
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_hd.s
浏览文件 @ 3d4e5e1f
;******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_hd.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x High Density Devices vector table for MDK-ARM
;* toolchain.
;* This module performs:
......@@ -355,4 +355,4 @@ __user_initial_stackheap
END
;******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE*****
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_hd_vl.s
浏览文件 @ 3d4e5e1f
;******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_hd_vl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x High Density Value Line Devices vector table
;* for MDK-ARM toolchain.
;* This module performs:
......@@ -126,7 +126,7 @@ __Vectors DCD __initial_sp ; Top of Stack
DCD TIM14_IRQHandler ; TIM14
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD FSMC_IRQHandler ; FSMC
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD TIM5_IRQHandler ; TIM5
DCD SPI3_IRQHandler ; SPI3
......@@ -244,7 +244,6 @@ Default_Handler PROC
EXPORT TIM12_IRQHandler [WEAK]
EXPORT TIM13_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT FSMC_IRQHandler [WEAK]
EXPORT TIM5_IRQHandler [WEAK]
EXPORT SPI3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
......@@ -299,7 +298,6 @@ CEC_IRQHandler
TIM12_IRQHandler
TIM13_IRQHandler
TIM14_IRQHandler
FSMC_IRQHandler
TIM5_IRQHandler
SPI3_IRQHandler
UART4_IRQHandler
......@@ -345,4 +343,4 @@ __user_initial_stackheap
END
;******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE*****
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_ld.s
浏览文件 @ 3d4e5e1f
;******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_ld.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Low Density Devices vector table for MDK-ARM
;* toolchain.
;* This module performs:
......@@ -294,4 +294,4 @@ __user_initial_stackheap
END
;******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE*****
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_ld_vl.s
浏览文件 @ 3d4e5e1f
;******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_ld_vl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Low Density Value Line Devices vector table
;* for MDK-ARM toolchain.
;* This module performs:
......@@ -301,4 +301,4 @@ __user_initial_stackheap
END
;******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE*****
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_md.s
浏览文件 @ 3d4e5e1f
;******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_md.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Medium Density Devices vector table for MDK-ARM
;* toolchain.
;* This module performs:
......@@ -304,4 +304,4 @@ __user_initial_stackheap
END
;******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE*****
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_md_vl.s
浏览文件 @ 3d4e5e1f
;******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_md_vl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Medium Density Value Line Devices vector table
;* for MDK-ARM toolchain.
;* This module performs:
......@@ -312,4 +312,4 @@ __user_initial_stackheap
END
;******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE*****
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_xl.s
浏览文件 @ 3d4e5e1f
;******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_xl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x XL-Density Devices vector table for MDK-ARM
;* toolchain.
;* This module performs:
......@@ -355,4 +355,4 @@ __user_initial_stackheap
END
;******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE*****
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_cl.s
浏览文件 @ 3d4e5e1f
......@@ -2,8 +2,8 @@
******************************************************************************
* @file startup_stm32f10x_cl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Connectivity line Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
......@@ -15,8 +15,8 @@
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -25,7 +25,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
......@@ -464,4 +465,4 @@ g_pfnVectors:
.weak OTG_FS_IRQHandler
.thumb_set OTG_FS_IRQHandler ,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_hd.s
浏览文件 @ 3d4e5e1f
......@@ -2,8 +2,8 @@
******************************************************************************
* @file startup_stm32f10x_hd.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x High Density Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
......@@ -16,8 +16,8 @@
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -26,7 +26,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
......@@ -461,4 +462,4 @@ g_pfnVectors:
.weak DMA2_Channel4_5_IRQHandler
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_hd_vl.s
浏览文件 @ 3d4e5e1f
......@@ -2,8 +2,8 @@
******************************************************************************
* @file startup_stm32f10x_hd_vl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x High Density Value Line Devices vector table for RIDE7
* toolchain.
* This module performs:
......@@ -17,8 +17,8 @@
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -27,7 +27,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
......@@ -187,7 +188,7 @@ g_pfnVectors:
.word TIM14_IRQHandler
.word 0
.word 0
.word FSMC_IRQHandler
.word 0
.word 0
.word TIM5_IRQHandler
.word SPI3_IRQHandler
......@@ -405,9 +406,6 @@ g_pfnVectors:
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak FSMC_IRQHandler
.thumb_set FSMC_IRQHandler,Default_Handler
.weak TIM5_IRQHandler
.thumb_set TIM5_IRQHandler,Default_Handler
......@@ -441,4 +439,4 @@ g_pfnVectors:
.weak DMA2_Channel5_IRQHandler
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_ld.s
浏览文件 @ 3d4e5e1f
......@@ -2,8 +2,8 @@
******************************************************************************
* @file startup_stm32f10x_ld.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Low Density Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
......@@ -14,8 +14,8 @@
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -24,7 +24,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
......@@ -339,4 +340,4 @@ g_pfnVectors:
.weak USBWakeUp_IRQHandler
.thumb_set USBWakeUp_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_ld_vl.s
浏览文件 @ 3d4e5e1f
......@@ -2,8 +2,8 @@
******************************************************************************
* @file startup_stm32f10x_ld_vl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Low Density Value Line Devices vector table for RIDE7
* toolchain.
* This module performs:
......@@ -15,8 +15,8 @@
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -25,7 +25,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
......@@ -379,4 +380,4 @@ g_pfnVectors:
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_md.s
浏览文件 @ 3d4e5e1f
......@@ -2,8 +2,8 @@
******************************************************************************
* @file startup_stm32f10x_md.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Medium Density Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
......@@ -14,8 +14,8 @@
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -24,7 +24,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
......@@ -354,4 +355,4 @@ g_pfnVectors:
.weak USBWakeUp_IRQHandler
.thumb_set USBWakeUp_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_md_vl.s
浏览文件 @ 3d4e5e1f
......@@ -2,8 +2,8 @@
******************************************************************************
* @file startup_stm32f10x_md_vl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Medium Density Value Line Devices vector table for RIDE7
* toolchain.
* This module performs:
......@@ -15,8 +15,8 @@
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -25,7 +25,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
......@@ -395,4 +396,4 @@ g_pfnVectors:
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_xl.s
浏览文件 @ 3d4e5e1f
......@@ -2,8 +2,8 @@
******************************************************************************
* @file startup_stm32f10x_xl.s
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x XL-Density Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
......@@ -16,8 +16,8 @@
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
* @copy
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -26,7 +26,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
......@@ -461,4 +462,4 @@ g_pfnVectors:
.weak DMA2_Channel4_5_IRQHandler
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_cl.s
浏览文件 @ 3d4e5e1f
;/******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics *******************
;* File Name : startup_stm32f10x_cl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Connectivity line devices vector table for
;* EWARM5.x toolchain.
;* EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Configure the clock system
......@@ -20,7 +20,7 @@
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************/
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
......@@ -504,4 +504,4 @@ OTG_FS_IRQHandler
B OTG_FS_IRQHandler
END
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_hd.s
浏览文件 @ 3d4e5e1f
;/******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_hd.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Description : STM32F10x High Density Devices vector table for EWARM5.x
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x High Density Devices vector table for EWARM
;* toolchain.
;* This module performs:
;* - Set the initial SP
......@@ -21,7 +21,7 @@
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************/
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
......@@ -493,4 +493,4 @@ DMA2_Channel4_5_IRQHandler
END
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_hd_vl.s
浏览文件 @ 3d4e5e1f
;/******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_hd_vl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x High Density Value Line Devices vector table
;* for EWARM5.x toolchain.
;* for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Configure the clock system and the external SRAM
......@@ -22,7 +22,7 @@
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************/
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
......@@ -119,7 +119,7 @@ __vector_table
DCD TIM14_IRQHandler ; TIM14
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD FSMC_IRQHandler ; FSMC
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD TIM5_IRQHandler ; TIM5
DCD SPI3_IRQHandler ; SPI3
......@@ -402,11 +402,6 @@ TIM13_IRQHandler
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK FSMC_IRQHandler
SECTION .text:CODE:REORDER(1)
FSMC_IRQHandler
B FSMC_IRQHandler
PUBWEAK TIM5_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM5_IRQHandler
......@@ -463,4 +458,4 @@ DMA2_Channel5_IRQHandler
B DMA2_Channel5_IRQHandler
END
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_ld.s
浏览文件 @ 3d4e5e1f
;/******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_ld.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Description : STM32F10x Low Density Devices vector table for EWARM5.x
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Low Density Devices vector table for EWARM
;* toolchain.
;* This module performs:
;* - Set the initial SP
......@@ -20,7 +20,7 @@
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************/
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
......@@ -363,4 +363,4 @@ USBWakeUp_IRQHandler
B USBWakeUp_IRQHandler
END
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_ld_vl.s
浏览文件 @ 3d4e5e1f
;/******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_ld_vl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Low Density Value Line Devices vector table
;* for EWARM5.x toolchain.
;* for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Configure the clock system
......@@ -20,7 +20,7 @@
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************/
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
......@@ -366,4 +366,4 @@ TIM7_IRQHandler
B TIM7_IRQHandler
END
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_md.s
浏览文件 @ 3d4e5e1f
;/******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_md.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Medium Density Devices vector table for
;* EWARM5.x toolchain.
;* EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Configure the clock system
......@@ -20,7 +20,7 @@
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************/
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
......@@ -388,4 +388,4 @@ USBWakeUp_IRQHandler
B USBWakeUp_IRQHandler
END
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_md_vl.s
浏览文件 @ 3d4e5e1f
;/******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_md_vl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Medium Density Value Line Devices vector table
;* for EWARM5.x toolchain.
;* for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Configure the clock system
......@@ -20,7 +20,7 @@
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************/
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
......@@ -391,4 +391,4 @@ TIM7_IRQHandler
B TIM7_IRQHandler
END
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_xl.s
浏览文件 @ 3d4e5e1f
;/******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_xl.s
;* Author : MCD Application Team
;* Version : V3.4.0
;* Date : 10/15/2010
;* Description : STM32F10x XL-Density Devices vector table for EWARM5.x
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x XL-Density Devices vector table for EWARM
;* toolchain.
;* This module performs:
;* - Set the initial SP
......@@ -21,7 +21,7 @@
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************/
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
......@@ -493,4 +493,4 @@ DMA2_Channel4_5_IRQHandler
END
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.h
浏览文件 @ 3d4e5e1f
......@@ -2,10 +2,11 @@
******************************************************************************
* @file system_stm32f10x.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Header File.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -14,7 +15,7 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
......@@ -94,4 +95,4 @@ extern void SystemCoreClockUpdate(void);
/**
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/SConscript
浏览文件 @ 3d4e5e1f
......@@ -2,9 +2,13 @@ import rtconfig
Import('RTT_ROOT')
from building import *
# get current directory
cwd = GetCurrentDir()
# The set of source files associated with this SConscript file.
src = Split("""
CMSIS/CM3/CoreSupport/core_cm3.c
CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.c
STM32F10x_StdPeriph_Driver/src/stm32f10x_crc.c
STM32F10x_StdPeriph_Driver/src/stm32f10x_rcc.c
STM32F10x_StdPeriph_Driver/src/stm32f10x_wwdg.c
......@@ -30,11 +34,30 @@ STM32F10x_StdPeriph_Driver/src/stm32f10x_cec.c
STM32F10x_StdPeriph_Driver/src/misc.c
""")
path = [RTT_ROOT + '/bsp/stm3210/Libraries/STM32F10x_StdPeriph_Driver/inc',
RTT_ROOT + '/bsp/stm3210/Libraries/CMSIS/CM3/CoreSupport',
RTT_ROOT + '/bsp/stm3210/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x']
# starupt scripts for each STM32 kind
startup_scripts = {}
startup_scripts['STM32F10X_CL'] = 'startup_stm32f10x_cl.s'
startup_scripts['STM32F10X_HD'] = 'startup_stm32f10x_hd.s'
startup_scripts['STM32F10X_HD_VL'] = 'startup_stm32f10x_hd_vl.s'
startup_scripts['STM32F10X_LD'] = 'startup_stm32f10x_ld.s'
startup_scripts['STM32F10X_LD_VL'] = 'startup_stm32f10x_ld_vl.s'
startup_scripts['STM32F10X_MD'] = 'startup_stm32f10x_md.s'
startup_scripts['STM32F10X_MD_VL'] = 'startup_stm32f10x_md_vl.s'
startup_scripts['STM32F10X_XL'] = 'startup_stm32f10x_xl.s'
# add for startup script
if rtconfig.CROSS_TOOL == 'gcc':
src = src + ['CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/' + startup_scripts[rtconfig.STM32_TYPE]]
elif rtconfig.CROSS_TOOL == 'keil':
src = src + ['CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/' + startup_scripts[rtconfig.STM32_TYPE]]
elif rtconfig.CROSS_TOOL == 'iar':
src = src + ['CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/' + startup_scripts[rtconfig.STM32_TYPE]]
path = [cwd + '/STM32F10x_StdPeriph_Driver/inc',
cwd + '/CMSIS/CM3/CoreSupport',
cwd + '/CMSIS/CM3/DeviceSupport/ST/STM32F10x']
CPPDEFINES = ['USE_STDPERIPH_DRIVER', rtconfig.STM32_TYPE]
group = DefineGroup('STM32_StdPeriph', src, depend = [''], CPPPATH = path)
group = DefineGroup('STM32_StdPeriph', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES)
Return('group')
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/misc.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file misc.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the miscellaneous
* firmware library functions (add-on to CMSIS functions).
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,7 +16,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
......@@ -216,4 +217,4 @@ void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_adc.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_adc.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the ADC firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,7 +16,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
......@@ -479,4 +480,4 @@ void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_bkp.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_bkp.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the BKP firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,7 +16,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
......@@ -191,4 +192,4 @@ void BKP_ClearITPendingBit(void);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_cec.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_cec.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the CEC firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,7 +16,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
......@@ -101,7 +102,7 @@ typedef struct
*/
/** @defgroup CEC_Own_Addres
/** @defgroup CEC_Own_Address
* @{
*/
#define IS_CEC_ADDRESS(ADDRESS) ((ADDRESS) < 0x10)
......@@ -206,4 +207,4 @@ void CEC_ClearITPendingBit(uint16_t CEC_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_crc.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_crc.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the CRC firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,7 +16,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
......@@ -90,4 +91,4 @@ uint8_t CRC_GetIDRegister(void);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dac.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_dac.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the DAC firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,7 +16,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
......@@ -200,7 +201,7 @@ typedef struct
* @}
*/
/** @defgroup DAC_data_alignement
/** @defgroup DAC_data_alignment
* @{
*/
......@@ -313,4 +314,4 @@ void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dbgmcu.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_dbgmcu.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the DBGMCU
* firmware library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,7 +16,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
......@@ -115,4 +116,4 @@ void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dma.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_dma.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the DMA firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,7 +16,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
......@@ -413,10 +414,10 @@ void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState);
void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState);
void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber);
uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx);
FlagStatus DMA_GetFlagStatus(uint32_t DMA_FLAG);
void DMA_ClearFlag(uint32_t DMA_FLAG);
ITStatus DMA_GetITStatus(uint32_t DMA_IT);
void DMA_ClearITPendingBit(uint32_t DMA_IT);
FlagStatus DMA_GetFlagStatus(uint32_t DMAy_FLAG);
void DMA_ClearFlag(uint32_t DMAy_FLAG);
ITStatus DMA_GetITStatus(uint32_t DMAy_IT);
void DMA_ClearITPendingBit(uint32_t DMAy_IT);
#ifdef __cplusplus
}
......@@ -435,4 +436,4 @@ void DMA_ClearITPendingBit(uint32_t DMA_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_exti.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_exti.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the EXTI firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,7 +16,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
......@@ -180,4 +181,4 @@ void EXTI_ClearITPendingBit(uint32_t EXTI_Line);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_flash.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_flash.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the FLASH
* firmware library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,7 +16,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
......@@ -422,4 +423,4 @@ FLASH_Status FLASH_BootConfig(uint16_t FLASH_BOOT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_fsmc.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_fsmc.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the FSMC firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,7 +16,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
......@@ -76,7 +77,7 @@ typedef struct
to the memory before getting the first data.
The value of this parameter depends on the memory type as shown below:
- It must be set to 0 in case of a CRAM
- It is don’t care in asynchronous NOR, SRAM or ROM accesses
- It is don't care in asynchronous NOR, SRAM or ROM accesses
- It may assume a value between 0 and 0xF in NOR Flash memories
with synchronous burst mode enable */
......@@ -729,4 +730,4 @@ void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_gpio.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_gpio.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the GPIO
* firmware library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,7 +16,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
......@@ -195,7 +196,7 @@ typedef enum
#define GPIO_Remap_SWJ_NoJTRST ((uint32_t)0x00300100) /*!< Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST */
#define GPIO_Remap_SWJ_JTAGDisable ((uint32_t)0x00300200) /*!< JTAG-DP Disabled and SW-DP Enabled */
#define GPIO_Remap_SWJ_Disable ((uint32_t)0x00300400) /*!< Full SWJ Disabled (JTAG-DP + SW-DP) */
#define GPIO_Remap_SPI3 ((uint32_t)0x00201000) /*!< SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices) */
#define GPIO_Remap_SPI3 ((uint32_t)0x00201100) /*!< SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices) */
#define GPIO_Remap_TIM2ITR1_PTP_SOF ((uint32_t)0x00202000) /*!< Ethernet PTP output or USB OTG SOF (Start of Frame) connected
to TIM2 Internal Trigger 1 for calibration
(only for Connectivity line devices) */
......@@ -381,4 +382,4 @@ void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_i2c.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_i2c.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the I2C firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,7 +16,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
......@@ -190,6 +191,18 @@ typedef struct
* @}
*/
/** @defgroup I2C_NCAK_position
* @{
*/
#define I2C_NACKPosition_Next ((uint16_t)0x0800)
#define I2C_NACKPosition_Current ((uint16_t)0xF7FF)
#define IS_I2C_NACK_POSITION(POSITION) (((POSITION) == I2C_NACKPosition_Next) || \
((POSITION) == I2C_NACKPosition_Current))
/**
* @}
*/
/** @defgroup I2C_interrupts_definition
* @{
*/
......@@ -433,7 +446,7 @@ typedef struct
* the end of the byte transmission. The two events I2C_EVENT_SLAVE_BYTE_TRANSMITTED and
* I2C_EVENT_SLAVE_BYTE_TRANSMITTING are similar. The second one can optionally be
* used when the user software doesn't guarantee the EV3 is managed before the
* current byte end of tranfer.
* current byte end of transfer.
* - EV3_2: When the master sends a NACK in order to tell slave that data transmission
* shall end (before sending the STOP condition). In this case slave has to stop sending
* data bytes and expect a Stop condition on the bus.
......@@ -536,6 +549,7 @@ uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx);
void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction);
uint16_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register);
void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
void I2C_NACKPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_NACKPosition);
void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, uint16_t I2C_SMBusAlert);
void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState);
void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition);
......@@ -577,10 +591,10 @@ void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle);
* @note
* For error management, it is advised to use the following functions:
* - I2C_ITConfig() to configure and enable the error interrupts (I2C_IT_ERR).
* - I2Cx_ER_IRQHandler() which is called when the error interurpt occurs.
* - I2Cx_ER_IRQHandler() which is called when the error interrupt occurs.
* Where x is the peripheral instance (I2C1, I2C2 ...)
* - I2C_GetFlagStatus() or I2C_GetITStatus() to be called into I2Cx_ER_IRQHandler()
* in order to determine which error occured.
* in order to determine which error occurred.
* - I2C_ClearFlag() or I2C_ClearITPendingBit() and/or I2C_SoftwareResetCmd()
* and/or I2C_GenerateStop() in order to clear the error flag and source,
* and return to correct communication status.
......@@ -667,4 +681,4 @@ void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_iwdg.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_iwdg.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the IWDG
* firmware library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,7 +16,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
......@@ -136,4 +137,4 @@ FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_pwr.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_pwr.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the PWR firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,7 +16,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
......@@ -152,4 +153,4 @@ void PWR_ClearFlag(uint32_t PWR_FLAG);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rcc.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_rcc.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the RCC firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,7 +16,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
......@@ -723,4 +724,4 @@ void RCC_ClearITPendingBit(uint8_t RCC_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rtc.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_rtc.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the RTC firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,7 +16,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
......@@ -131,4 +132,4 @@ void RTC_ClearITPendingBit(uint16_t RTC_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_sdio.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_sdio.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the SDIO firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,7 +16,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
......@@ -189,7 +190,7 @@ typedef struct
*/
/** @defgroup SDIO_Interrupt_soucres
/** @defgroup SDIO_Interrupt_sources
* @{
*/
......@@ -527,4 +528,4 @@ void SDIO_ClearITPendingBit(uint32_t SDIO_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_spi.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_spi.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the SPI firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,7 +16,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
......@@ -339,7 +340,7 @@ typedef struct
* @}
*/
/** @defgroup SPI_NSS_internal_software_mangement
/** @defgroup SPI_NSS_internal_software_management
* @{
*/
......@@ -483,4 +484,4 @@ void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_tim.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_tim.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the TIM firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,7 +16,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
......@@ -44,7 +45,7 @@
/**
* @brief TIM Time Base Init structure definition
* @note This sturcture is used with all TIMx except for TIM6 and TIM7.
* @note This structure is used with all TIMx except for TIM6 and TIM7.
*/
typedef struct
......@@ -132,7 +133,7 @@ typedef struct
/**
* @brief BDTR structure definition
* @note This sturcture is used only with TIM1 and TIM8.
* @note This structure is used only with TIM1 and TIM8.
*/
typedef struct
......@@ -669,42 +670,42 @@ typedef struct
* @{
*/
#define TIM_DMABurstLength_1Byte ((uint16_t)0x0000)
#define TIM_DMABurstLength_2Bytes ((uint16_t)0x0100)
#define TIM_DMABurstLength_3Bytes ((uint16_t)0x0200)
#define TIM_DMABurstLength_4Bytes ((uint16_t)0x0300)
#define TIM_DMABurstLength_5Bytes ((uint16_t)0x0400)
#define TIM_DMABurstLength_6Bytes ((uint16_t)0x0500)
#define TIM_DMABurstLength_7Bytes ((uint16_t)0x0600)
#define TIM_DMABurstLength_8Bytes ((uint16_t)0x0700)
#define TIM_DMABurstLength_9Bytes ((uint16_t)0x0800)
#define TIM_DMABurstLength_10Bytes ((uint16_t)0x0900)
#define TIM_DMABurstLength_11Bytes ((uint16_t)0x0A00)
#define TIM_DMABurstLength_12Bytes ((uint16_t)0x0B00)
#define TIM_DMABurstLength_13Bytes ((uint16_t)0x0C00)
#define TIM_DMABurstLength_14Bytes ((uint16_t)0x0D00)
#define TIM_DMABurstLength_15Bytes ((uint16_t)0x0E00)
#define TIM_DMABurstLength_16Bytes ((uint16_t)0x0F00)
#define TIM_DMABurstLength_17Bytes ((uint16_t)0x1000)
#define TIM_DMABurstLength_18Bytes ((uint16_t)0x1100)
#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABurstLength_1Byte) || \
((LENGTH) == TIM_DMABurstLength_2Bytes) || \
((LENGTH) == TIM_DMABurstLength_3Bytes) || \
((LENGTH) == TIM_DMABurstLength_4Bytes) || \
((LENGTH) == TIM_DMABurstLength_5Bytes) || \
((LENGTH) == TIM_DMABurstLength_6Bytes) || \
((LENGTH) == TIM_DMABurstLength_7Bytes) || \
((LENGTH) == TIM_DMABurstLength_8Bytes) || \
((LENGTH) == TIM_DMABurstLength_9Bytes) || \
((LENGTH) == TIM_DMABurstLength_10Bytes) || \
((LENGTH) == TIM_DMABurstLength_11Bytes) || \
((LENGTH) == TIM_DMABurstLength_12Bytes) || \
((LENGTH) == TIM_DMABurstLength_13Bytes) || \
((LENGTH) == TIM_DMABurstLength_14Bytes) || \
((LENGTH) == TIM_DMABurstLength_15Bytes) || \
((LENGTH) == TIM_DMABurstLength_16Bytes) || \
((LENGTH) == TIM_DMABurstLength_17Bytes) || \
((LENGTH) == TIM_DMABurstLength_18Bytes))
#define TIM_DMABurstLength_1Transfer ((uint16_t)0x0000)
#define TIM_DMABurstLength_2Transfers ((uint16_t)0x0100)
#define TIM_DMABurstLength_3Transfers ((uint16_t)0x0200)
#define TIM_DMABurstLength_4Transfers ((uint16_t)0x0300)
#define TIM_DMABurstLength_5Transfers ((uint16_t)0x0400)
#define TIM_DMABurstLength_6Transfers ((uint16_t)0x0500)
#define TIM_DMABurstLength_7Transfers ((uint16_t)0x0600)
#define TIM_DMABurstLength_8Transfers ((uint16_t)0x0700)
#define TIM_DMABurstLength_9Transfers ((uint16_t)0x0800)
#define TIM_DMABurstLength_10Transfers ((uint16_t)0x0900)
#define TIM_DMABurstLength_11Transfers ((uint16_t)0x0A00)
#define TIM_DMABurstLength_12Transfers ((uint16_t)0x0B00)
#define TIM_DMABurstLength_13Transfers ((uint16_t)0x0C00)
#define TIM_DMABurstLength_14Transfers ((uint16_t)0x0D00)
#define TIM_DMABurstLength_15Transfers ((uint16_t)0x0E00)
#define TIM_DMABurstLength_16Transfers ((uint16_t)0x0F00)
#define TIM_DMABurstLength_17Transfers ((uint16_t)0x1000)
#define TIM_DMABurstLength_18Transfers ((uint16_t)0x1100)
#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABurstLength_1Transfer) || \
((LENGTH) == TIM_DMABurstLength_2Transfers) || \
((LENGTH) == TIM_DMABurstLength_3Transfers) || \
((LENGTH) == TIM_DMABurstLength_4Transfers) || \
((LENGTH) == TIM_DMABurstLength_5Transfers) || \
((LENGTH) == TIM_DMABurstLength_6Transfers) || \
((LENGTH) == TIM_DMABurstLength_7Transfers) || \
((LENGTH) == TIM_DMABurstLength_8Transfers) || \
((LENGTH) == TIM_DMABurstLength_9Transfers) || \
((LENGTH) == TIM_DMABurstLength_10Transfers) || \
((LENGTH) == TIM_DMABurstLength_11Transfers) || \
((LENGTH) == TIM_DMABurstLength_12Transfers) || \
((LENGTH) == TIM_DMABurstLength_13Transfers) || \
((LENGTH) == TIM_DMABurstLength_14Transfers) || \
((LENGTH) == TIM_DMABurstLength_15Transfers) || \
((LENGTH) == TIM_DMABurstLength_16Transfers) || \
((LENGTH) == TIM_DMABurstLength_17Transfers) || \
((LENGTH) == TIM_DMABurstLength_18Transfers))
/**
* @}
*/
......@@ -866,7 +867,7 @@ typedef struct
* @}
*/
/** @defgroup TIM_Ouput_Compare_Preload_State
/** @defgroup TIM_Output_Compare_Preload_State
* @{
*/
......@@ -878,7 +879,7 @@ typedef struct
* @}
*/
/** @defgroup TIM_Ouput_Compare_Fast_State
/** @defgroup TIM_Output_Compare_Fast_State
* @{
*/
......@@ -891,7 +892,7 @@ typedef struct
* @}
*/
/** @defgroup TIM_Ouput_Compare_Clear_State
/** @defgroup TIM_Output_Compare_Clear_State
* @{
*/
......@@ -1008,6 +1009,32 @@ typedef struct
* @}
*/
/** @defgroup TIM_Legacy
* @{
*/
#define TIM_DMABurstLength_1Byte TIM_DMABurstLength_1Transfer
#define TIM_DMABurstLength_2Bytes TIM_DMABurstLength_2Transfers
#define TIM_DMABurstLength_3Bytes TIM_DMABurstLength_3Transfers
#define TIM_DMABurstLength_4Bytes TIM_DMABurstLength_4Transfers
#define TIM_DMABurstLength_5Bytes TIM_DMABurstLength_5Transfers
#define TIM_DMABurstLength_6Bytes TIM_DMABurstLength_6Transfers
#define TIM_DMABurstLength_7Bytes TIM_DMABurstLength_7Transfers
#define TIM_DMABurstLength_8Bytes TIM_DMABurstLength_8Transfers
#define TIM_DMABurstLength_9Bytes TIM_DMABurstLength_9Transfers
#define TIM_DMABurstLength_10Bytes TIM_DMABurstLength_10Transfers
#define TIM_DMABurstLength_11Bytes TIM_DMABurstLength_11Transfers
#define TIM_DMABurstLength_12Bytes TIM_DMABurstLength_12Transfers
#define TIM_DMABurstLength_13Bytes TIM_DMABurstLength_13Transfers
#define TIM_DMABurstLength_14Bytes TIM_DMABurstLength_14Transfers
#define TIM_DMABurstLength_15Bytes TIM_DMABurstLength_15Transfers
#define TIM_DMABurstLength_16Bytes TIM_DMABurstLength_16Transfers
#define TIM_DMABurstLength_17Bytes TIM_DMABurstLength_17Transfers
#define TIM_DMABurstLength_18Bytes TIM_DMABurstLength_18Transfers
/**
* @}
*/
/**
* @}
*/
......@@ -1134,4 +1161,4 @@ void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_usart.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_usart.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the USART
* firmware library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,7 +16,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
......@@ -408,4 +409,4 @@ void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_wwdg.h
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file stm32f10x_wwdg.h
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the WWDG firmware
* library.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,7 +16,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
......@@ -111,4 +112,4 @@ void WWDG_ClearFlag(void);
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/misc.c
浏览文件 @ 3d4e5e1f
......@@ -2,12 +2,12 @@
******************************************************************************
* @file misc.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the miscellaneous firmware functions (add-on
* to CMSIS functions).
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -16,7 +16,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
......@@ -148,7 +149,8 @@ void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct)
* This parameter can be one of the following values:
* @arg NVIC_VectTab_RAM
* @arg NVIC_VectTab_FLASH
* @param Offset: Vector Table base offset field. This value must be a multiple of 0x100.
* @param Offset: Vector Table base offset field. This value must be a multiple
* of 0x200.
* @retval None
*/
void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset)
......@@ -220,4 +222,4 @@ void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_adc.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_adc.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the ADC firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,7 +15,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
......@@ -379,7 +380,7 @@ void ADC_ResetCalibration(ADC_TypeDef* ADCx)
{
/* Check the parameters */
assert_param(IS_ADC_ALL_PERIPH(ADCx));
/* Resets the selected ADC calibartion registers */
/* Resets the selected ADC calibration registers */
ADCx->CR2 |= CR2_RSTCAL_Set;
}
......@@ -1270,7 +1271,7 @@ ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT)
}
/**
* @brief Clears the ADCxs interrupt pending bits.
* @brief Clears the ADCx's interrupt pending bits.
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
* @param ADC_IT: specifies the ADC interrupt pending bit to clear.
* This parameter can be any combination of the following values:
......@@ -1303,4 +1304,4 @@ void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_bkp.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_bkp.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the BKP firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,7 +15,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
......@@ -304,4 +305,4 @@ void BKP_ClearITPendingBit(void)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_cec.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_cec.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the CEC firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,7 +15,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
......@@ -277,7 +278,7 @@ void CEC_EndOfMessageCmd(FunctionalState NewState)
* @arg CEC_FLAG_SBE: Start Bit Error
* @arg CEC_FLAG_ACKE: Block Acknowledge Error
* @arg CEC_FLAG_LINE: Line Error
* @arg CEC_FLAG_TBTFE: Tx Block Transfer Finsihed Error
* @arg CEC_FLAG_TBTFE: Tx Block Transfer Finished Error
* @arg CEC_FLAG_TEOM: Tx End Of Message
* @arg CEC_FLAG_TERR: Tx Error
* @arg CEC_FLAG_TBTRF: Tx Byte Transfer Request or Block Transfer Finished
......@@ -429,4 +430,4 @@ void CEC_ClearITPendingBit(uint16_t CEC_IT)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_crc.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_crc.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the CRC firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,7 +15,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
......@@ -156,4 +157,4 @@ uint8_t CRC_GetIDRegister(void)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dac.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_dac.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the DAC firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,7 +15,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
......@@ -126,8 +127,8 @@ void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct)
tmpreg1 = DAC->CR;
/* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */
tmpreg1 &= ~(CR_CLEAR_MASK << DAC_Channel);
/* Configure for the selected DAC channel: buffer output, trigger, wave genration,
mask/amplitude for wave genration */
/* Configure for the selected DAC channel: buffer output, trigger, wave generation,
mask/amplitude for wave generation */
/* Set TSELx and TENx bits according to DAC_Trigger value */
/* Set WAVEx bits according to DAC_WaveGeneration value */
/* Set MAMPx bits according to DAC_LFSRUnmask_TriangleAmplitude value */
......@@ -330,11 +331,11 @@ void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalSt
/**
* @brief Set the specified data holding register value for DAC channel1.
* @param DAC_Align: Specifies the data alignement for DAC channel1.
* @param DAC_Align: Specifies the data alignment for DAC channel1.
* This parameter can be one of the following values:
* @arg DAC_Align_8b_R: 8bit right data alignement selected
* @arg DAC_Align_12b_L: 12bit left data alignement selected
* @arg DAC_Align_12b_R: 12bit right data alignement selected
* @arg DAC_Align_8b_R: 8bit right data alignment selected
* @arg DAC_Align_12b_L: 12bit left data alignment selected
* @arg DAC_Align_12b_R: 12bit right data alignment selected
* @param Data : Data to be loaded in the selected data holding register.
* @retval None
*/
......@@ -355,11 +356,11 @@ void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data)
/**
* @brief Set the specified data holding register value for DAC channel2.
* @param DAC_Align: Specifies the data alignement for DAC channel2.
* @param DAC_Align: Specifies the data alignment for DAC channel2.
* This parameter can be one of the following values:
* @arg DAC_Align_8b_R: 8bit right data alignement selected
* @arg DAC_Align_12b_L: 12bit left data alignement selected
* @arg DAC_Align_12b_R: 12bit right data alignement selected
* @arg DAC_Align_8b_R: 8bit right data alignment selected
* @arg DAC_Align_12b_L: 12bit left data alignment selected
* @arg DAC_Align_12b_R: 12bit right data alignment selected
* @param Data : Data to be loaded in the selected data holding register.
* @retval None
*/
......@@ -381,11 +382,11 @@ void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data)
/**
* @brief Set the specified data holding register value for dual channel
* DAC.
* @param DAC_Align: Specifies the data alignement for dual channel DAC.
* @param DAC_Align: Specifies the data alignment for dual channel DAC.
* This parameter can be one of the following values:
* @arg DAC_Align_8b_R: 8bit right data alignement selected
* @arg DAC_Align_12b_L: 12bit left data alignement selected
* @arg DAC_Align_12b_R: 12bit right data alignement selected
* @arg DAC_Align_8b_R: 8bit right data alignment selected
* @arg DAC_Align_12b_L: 12bit left data alignment selected
* @arg DAC_Align_12b_R: 12bit right data alignment selected
* @param Data2: Data for DAC Channel2 to be loaded in the selected data
* holding register.
* @param Data1: Data for DAC Channel1 to be loaded in the selected data
......@@ -419,7 +420,7 @@ void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1)
}
/**
* @brief Returns the last data output value of the selected DAC cahnnel.
* @brief Returns the last data output value of the selected DAC channel.
* @param DAC_Channel: the selected DAC channel.
* This parameter can be one of the following values:
* @arg DAC_Channel_1: DAC Channel1 selected
......@@ -534,7 +535,7 @@ ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT)
}
/**
* @brief Clears the DAC channelxs interrupt pending bits.
* @brief Clears the DAC channelx's interrupt pending bits.
* @param DAC_Channel: the selected DAC channel.
* This parameter can be one of the following values:
* @arg DAC_Channel_1: DAC Channel1 selected
......@@ -567,4 +568,4 @@ void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dbgmcu.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_dbgmcu.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the DBGMCU firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,7 +15,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
......@@ -158,4 +159,4 @@ void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dma.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_dma.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the DMA firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,7 +15,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
......@@ -377,7 +378,7 @@ uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx)
/**
* @brief Checks whether the specified DMAy Channelx flag is set or not.
* @param DMA_FLAG: specifies the flag to check.
* @param DMAy_FLAG: specifies the flag to check.
* This parameter can be one of the following values:
* @arg DMA1_FLAG_GL1: DMA1 Channel1 global flag.
* @arg DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag.
......@@ -427,17 +428,18 @@ uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx)
* @arg DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag.
* @arg DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag.
* @arg DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag.
* @retval The new state of DMA_FLAG (SET or RESET).
* @retval The new state of DMAy_FLAG (SET or RESET).
*/
FlagStatus DMA_GetFlagStatus(uint32_t DMA_FLAG)
FlagStatus DMA_GetFlagStatus(uint32_t DMAy_FLAG)
{
FlagStatus bitstatus = RESET;
uint32_t tmpreg = 0;
/* Check the parameters */
assert_param(IS_DMA_GET_FLAG(DMA_FLAG));
assert_param(IS_DMA_GET_FLAG(DMAy_FLAG));
/* Calculate the used DMA */
if ((DMA_FLAG & FLAG_Mask) != (uint32_t)RESET)
/* Calculate the used DMAy */
if ((DMAy_FLAG & FLAG_Mask) != (uint32_t)RESET)
{
/* Get DMA2 ISR register value */
tmpreg = DMA2->ISR ;
......@@ -448,25 +450,25 @@ FlagStatus DMA_GetFlagStatus(uint32_t DMA_FLAG)
tmpreg = DMA1->ISR ;
}
/* Check the status of the specified DMA flag */
if ((tmpreg & DMA_FLAG) != (uint32_t)RESET)
/* Check the status of the specified DMAy flag */
if ((tmpreg & DMAy_FLAG) != (uint32_t)RESET)
{
/* DMA_FLAG is set */
/* DMAy_FLAG is set */
bitstatus = SET;
}
else
{
/* DMA_FLAG is reset */
/* DMAy_FLAG is reset */
bitstatus = RESET;
}
/* Return the DMA_FLAG status */
/* Return the DMAy_FLAG status */
return bitstatus;
}
/**
* @brief Clears the DMAy Channelx's pending flags.
* @param DMA_FLAG: specifies the flag to clear.
* @param DMAy_FLAG: specifies the flag to clear.
* This parameter can be any combination (for the same DMA) of the following values:
* @arg DMA1_FLAG_GL1: DMA1 Channel1 global flag.
* @arg DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag.
......@@ -518,27 +520,27 @@ FlagStatus DMA_GetFlagStatus(uint32_t DMA_FLAG)
* @arg DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag.
* @retval None
*/
void DMA_ClearFlag(uint32_t DMA_FLAG)
void DMA_ClearFlag(uint32_t DMAy_FLAG)
{
/* Check the parameters */
assert_param(IS_DMA_CLEAR_FLAG(DMA_FLAG));
/* Calculate the used DMA */
assert_param(IS_DMA_CLEAR_FLAG(DMAy_FLAG));
if ((DMA_FLAG & FLAG_Mask) != (uint32_t)RESET)
/* Calculate the used DMAy */
if ((DMAy_FLAG & FLAG_Mask) != (uint32_t)RESET)
{
/* Clear the selected DMA flags */
DMA2->IFCR = DMA_FLAG;
/* Clear the selected DMAy flags */
DMA2->IFCR = DMAy_FLAG;
}
else
{
/* Clear the selected DMA flags */
DMA1->IFCR = DMA_FLAG;
/* Clear the selected DMAy flags */
DMA1->IFCR = DMAy_FLAG;
}
}
/**
* @brief Checks whether the specified DMAy Channelx interrupt has occurred or not.
* @param DMA_IT: specifies the DMA interrupt source to check.
* @param DMAy_IT: specifies the DMAy interrupt source to check.
* This parameter can be one of the following values:
* @arg DMA1_IT_GL1: DMA1 Channel1 global interrupt.
* @arg DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt.
......@@ -588,36 +590,37 @@ void DMA_ClearFlag(uint32_t DMA_FLAG)
* @arg DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt.
* @arg DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt.
* @arg DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt.
* @retval The new state of DMA_IT (SET or RESET).
* @retval The new state of DMAy_IT (SET or RESET).
*/
ITStatus DMA_GetITStatus(uint32_t DMA_IT)
ITStatus DMA_GetITStatus(uint32_t DMAy_IT)
{
ITStatus bitstatus = RESET;
uint32_t tmpreg = 0;
/* Check the parameters */
assert_param(IS_DMA_GET_IT(DMA_IT));
assert_param(IS_DMA_GET_IT(DMAy_IT));
/* Calculate the used DMA */
if ((DMA_IT & FLAG_Mask) != (uint32_t)RESET)
if ((DMAy_IT & FLAG_Mask) != (uint32_t)RESET)
{
/* Get DMA2 ISR register value */
tmpreg = DMA2->ISR ;
tmpreg = DMA2->ISR;
}
else
{
/* Get DMA1 ISR register value */
tmpreg = DMA1->ISR ;
tmpreg = DMA1->ISR;
}
/* Check the status of the specified DMA interrupt */
if ((tmpreg & DMA_IT) != (uint32_t)RESET)
/* Check the status of the specified DMAy interrupt */
if ((tmpreg & DMAy_IT) != (uint32_t)RESET)
{
/* DMA_IT is set */
/* DMAy_IT is set */
bitstatus = SET;
}
else
{
/* DMA_IT is reset */
/* DMAy_IT is reset */
bitstatus = RESET;
}
/* Return the DMA_IT status */
......@@ -625,8 +628,8 @@ ITStatus DMA_GetITStatus(uint32_t DMA_IT)
}
/**
* @brief Clears the DMAy Channelxs interrupt pending bits.
* @param DMA_IT: specifies the DMA interrupt pending bit to clear.
* @brief Clears the DMAy Channelx's interrupt pending bits.
* @param DMAy_IT: specifies the DMAy interrupt pending bit to clear.
* This parameter can be any combination (for the same DMA) of the following values:
* @arg DMA1_IT_GL1: DMA1 Channel1 global interrupt.
* @arg DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt.
......@@ -678,21 +681,21 @@ ITStatus DMA_GetITStatus(uint32_t DMA_IT)
* @arg DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt.
* @retval None
*/
void DMA_ClearITPendingBit(uint32_t DMA_IT)
void DMA_ClearITPendingBit(uint32_t DMAy_IT)
{
/* Check the parameters */
assert_param(IS_DMA_CLEAR_IT(DMA_IT));
assert_param(IS_DMA_CLEAR_IT(DMAy_IT));
/* Calculate the used DMA */
if ((DMA_IT & FLAG_Mask) != (uint32_t)RESET)
/* Calculate the used DMAy */
if ((DMAy_IT & FLAG_Mask) != (uint32_t)RESET)
{
/* Clear the selected DMA interrupt pending bits */
DMA2->IFCR = DMA_IT;
/* Clear the selected DMAy interrupt pending bits */
DMA2->IFCR = DMAy_IT;
}
else
{
/* Clear the selected DMA interrupt pending bits */
DMA1->IFCR = DMA_IT;
/* Clear the selected DMAy interrupt pending bits */
DMA1->IFCR = DMAy_IT;
}
}
......@@ -708,4 +711,4 @@ void DMA_ClearITPendingBit(uint32_t DMA_IT)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_exti.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_exti.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the EXTI firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,7 +15,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
......@@ -200,7 +201,7 @@ FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line)
}
/**
* @brief Clears the EXTIs line pending flags.
* @brief Clears the EXTI's line pending flags.
* @param EXTI_Line: specifies the EXTI lines flags to clear.
* This parameter can be any combination of EXTI_Linex where x can be (0..19).
* @retval None
......@@ -240,7 +241,7 @@ ITStatus EXTI_GetITStatus(uint32_t EXTI_Line)
}
/**
* @brief Clears the EXTIs line pending bits.
* @brief Clears the EXTI's line pending bits.
* @param EXTI_Line: specifies the EXTI lines to clear.
* This parameter can be any combination of EXTI_Linex where x can be (0..19).
* @retval None
......@@ -265,4 +266,4 @@ void EXTI_ClearITPendingBit(uint32_t EXTI_Line)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_flash.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_flash.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the FLASH firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,7 +15,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
......@@ -1226,7 +1227,7 @@ uint32_t FLASH_GetUserOptionByte(void)
*/
uint32_t FLASH_GetWriteProtectionOptionByte(void)
{
/* Return the Falsh write protection Register value */
/* Return the Flash write protection Register value */
return (uint32_t)(FLASH->WRPR);
}
......@@ -1428,7 +1429,7 @@ FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG)
}
/**
* @brief Clears the FLASH’s pending flags.
* @brief Clears the FLASH's pending flags.
* @note This function can be used for all STM32F10x devices.
* - For STM32F10X_XL devices, this function clears Bank1 or Bank2’s pending flags
* - For other devices, it clears Bank1’s pending flags.
......@@ -1587,7 +1588,7 @@ FLASH_Status FLASH_GetBank2Status(void)
* to complete or a TIMEOUT to occur.
* - For all other devices it waits for a Flash operation to complete
* or a TIMEOUT to occur.
* @param Timeout: FLASH progamming Timeout
* @param Timeout: FLASH programming Timeout
* @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
*/
......@@ -1615,7 +1616,7 @@ FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout)
* @brief Waits for a Flash operation on Bank1 to complete or a TIMEOUT to occur.
* @note This function can be used for all STM32F10x devices,
* it is equivalent to FLASH_WaitForLastOperation.
* @param Timeout: FLASH progamming Timeout
* @param Timeout: FLASH programming Timeout
* @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
*/
......@@ -1643,7 +1644,7 @@ FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout)
/**
* @brief Waits for a Flash operation on Bank2 to complete or a TIMEOUT to occur.
* @note This function can be used only for STM32F10x_XL density devices.
* @param Timeout: FLASH progamming Timeout
* @param Timeout: FLASH programming Timeout
* @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
*/
......@@ -1680,4 +1681,4 @@ FLASH_Status FLASH_WaitForLastBank2Operation(uint32_t Timeout)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_fsmc.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_fsmc.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the FSMC firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,7 +15,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
......@@ -254,7 +255,8 @@ void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct)
* @brief Initializes the FSMC NAND Banks according to the specified
* parameters in the FSMC_NANDInitStruct.
* @param FSMC_NANDInitStruct : pointer to a FSMC_NANDInitTypeDef
* structure that contains the configuration information for the FSMC NAND specified Banks.
* structure that contains the configuration information for the FSMC
* NAND specified Banks.
* @retval None
*/
void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct)
......@@ -319,7 +321,8 @@ void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct)
* @brief Initializes the FSMC PCCARD Bank according to the specified
* parameters in the FSMC_PCCARDInitStruct.
* @param FSMC_PCCARDInitStruct : pointer to a FSMC_PCCARDInitTypeDef
* structure that contains the configuration information for the FSMC PCCARD Bank.
* structure that contains the configuration information for the FSMC
* PCCARD Bank.
* @retval None
*/
void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct)
......@@ -728,7 +731,7 @@ FlagStatus FSMC_GetFlagStatus(uint32_t FSMC_Bank, uint32_t FSMC_FLAG)
}
/**
* @brief Clears the FSMCs pending flags.
* @brief Clears the FSMC's pending flags.
* @param FSMC_Bank: specifies the FSMC Bank to be used
* This parameter can be one of the following values:
* @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
......@@ -814,7 +817,7 @@ ITStatus FSMC_GetITStatus(uint32_t FSMC_Bank, uint32_t FSMC_IT)
}
/**
* @brief Clears the FSMCs interrupt pending bits.
* @brief Clears the FSMC's interrupt pending bits.
* @param FSMC_Bank: specifies the FSMC Bank to be used
* This parameter can be one of the following values:
* @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
......@@ -860,4 +863,4 @@ void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_gpio.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the GPIO firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,7 +15,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
......@@ -519,6 +520,8 @@ void GPIO_EventOutputCmd(FunctionalState NewState)
* @arg GPIO_Remap_SWJ_JTAGDisable : JTAG-DP Disabled and SW-DP Enabled
* @arg GPIO_Remap_SWJ_Disable : Full SWJ Disabled (JTAG-DP + SW-DP)
* @arg GPIO_Remap_SPI3 : SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices)
* When the SPI3/I2S3 is remapped using this function, the SWJ is configured
* to Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST.
* @arg GPIO_Remap_TIM2ITR1_PTP_SOF : Ethernet PTP output or USB OTG SOF (Start of Frame) connected
* to TIM2 Internal Trigger 1 for calibration (only for Connectivity line devices)
* If the GPIO_Remap_TIM2ITR1_PTP_SOF is enabled the TIM2 ITR1 is connected to
......@@ -644,4 +647,4 @@ void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_i2c.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_i2c.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the I2C firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,7 +15,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
......@@ -671,6 +672,46 @@ void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
}
}
/**
* @brief Selects the specified I2C NACK position in master receiver mode.
* This function is useful in I2C Master Receiver mode when the number
* of data to be received is equal to 2. In this case, this function
* should be called (with parameter I2C_NACKPosition_Next) before data
* reception starts,as described in the 2-byte reception procedure
* recommended in Reference Manual in Section: Master receiver.
* @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
* @param I2C_NACKPosition: specifies the NACK position.
* This parameter can be one of the following values:
* @arg I2C_NACKPosition_Next: indicates that the next byte will be the last
* received byte.
* @arg I2C_NACKPosition_Current: indicates that current byte is the last
* received byte.
*
* @note This function configures the same bit (POS) as I2C_PECPositionConfig()
* but is intended to be used in I2C mode while I2C_PECPositionConfig()
* is intended to used in SMBUS mode.
*
* @retval None
*/
void I2C_NACKPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_NACKPosition)
{
/* Check the parameters */
assert_param(IS_I2C_ALL_PERIPH(I2Cx));
assert_param(IS_I2C_NACK_POSITION(I2C_NACKPosition));
/* Check the input parameter */
if (I2C_NACKPosition == I2C_NACKPosition_Next)
{
/* Next byte in shift register is the last received byte */
I2Cx->CR1 |= I2C_NACKPosition_Next;
}
else
{
/* Current byte in shift register is the last received byte */
I2Cx->CR1 &= I2C_NACKPosition_Current;
}
}
/**
* @brief Drives the SMBusAlert pin high or low for the specified I2C.
* @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
......@@ -728,6 +769,11 @@ void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState)
* This parameter can be one of the following values:
* @arg I2C_PECPosition_Next: indicates that the next byte is PEC
* @arg I2C_PECPosition_Current: indicates that current byte is PEC
*
* @note This function configures the same bit (POS) as I2C_NACKPositionConfig()
* but is intended to be used in SMBUS mode while I2C_NACKPositionConfig()
* is intended to used in I2C mode.
*
* @retval None
*/
void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition)
......@@ -748,7 +794,7 @@ void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition)
}
/**
* @brief Enables or disables the PEC value calculation of the transfered bytes.
* @brief Enables or disables the PEC value calculation of the transferred bytes.
* @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
* @param NewState: new state of the I2Cx PEC value calculation.
* This parameter can be: ENABLE or DISABLE.
......@@ -878,7 +924,7 @@ void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle)
* It returns SUCCESS if the current status includes the given flags
* and returns ERROR if one or more flags are missing in the current status.
* - When to use:
* - This function is suitable for most applciations as well as for startup
* - This function is suitable for most applications as well as for startup
* activity since the events are fully described in the product reference manual
* (RM0008).
* - It is also suitable for users who need to define their own events.
......@@ -892,7 +938,7 @@ void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle)
* @note
* For error management, it is advised to use the following functions:
* - I2C_ITConfig() to configure and enable the error interrupts (I2C_IT_ERR).
* - I2Cx_ER_IRQHandler() which is called when the error interurpt occurs.
* - I2Cx_ER_IRQHandler() which is called when the error interrupt occurs.
* Where x is the peripheral instance (I2C1, I2C2 ...)
* - I2C_GetFlagStatus() or I2C_GetITStatus() to be called into I2Cx_ER_IRQHandler()
* in order to determine which error occured.
......@@ -907,9 +953,9 @@ void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle)
* by 16 bits and concatenated to Status Register 1).
* - When to use:
* - This function is suitable for the same applications above but it allows to
* overcome the mentionned limitation of I2C_GetFlagStatus() function.
* overcome the mentioned limitation of I2C_GetFlagStatus() function.
* The returned value could be compared to events already defined in the
* library (stm32f10x_i2c.h) or to custom values defiend by user.
* library (stm32f10x_i2c.h) or to custom values defined by user.
* - This function is suitable when multiple flags are monitored at the same time.
* - At the opposite of I2C_CheckEvent() function, this function allows user to
* choose when an event is accepted (when all events flags are set and no
......@@ -977,7 +1023,7 @@ void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle)
* @note: For detailed description of Events, please refer to section
* I2C_Events in stm32f10x_i2c.h file.
*
* @retval An ErrorStatus enumuration value:
* @retval An ErrorStatus enumeration value:
* - SUCCESS: Last event is equal to the I2C_EVENT
* - ERROR: Last event is different from the I2C_EVENT
*/
......@@ -1079,8 +1125,8 @@ uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx)
* @arg I2C_FLAG_STOPF: Stop detection flag (Slave mode)
* @arg I2C_FLAG_ADD10: 10-bit header sent flag (Master mode)
* @arg I2C_FLAG_BTF: Byte transfer finished flag
* @arg I2C_FLAG_ADDR: Address sent flag (Master mode) ADSL
* Address matched flag (Slave mode)ENDAD
* @arg I2C_FLAG_ADDR: Address sent flag (Master mode) "ADSL"
* Address matched flag (Slave mode)"ENDA"
* @arg I2C_FLAG_SB: Start bit flag (Master mode)
* @retval The new state of I2C_FLAG (SET or RESET).
*/
......@@ -1192,8 +1238,8 @@ void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG)
* @arg I2C_IT_STOPF: Stop detection flag (Slave mode)
* @arg I2C_IT_ADD10: 10-bit header sent flag (Master mode)
* @arg I2C_IT_BTF: Byte transfer finished flag
* @arg I2C_IT_ADDR: Address sent flag (Master mode) ADSL
* Address matched flag (Slave mode)ENDAD
* @arg I2C_IT_ADDR: Address sent flag (Master mode) "ADSL"
* Address matched flag (Slave mode)"ENDAD"
* @arg I2C_IT_SB: Start bit flag (Master mode)
* @retval The new state of I2C_IT (SET or RESET).
*/
......@@ -1282,4 +1328,4 @@ void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_iwdg.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_iwdg.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the IWDG firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,7 +15,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
......@@ -186,4 +187,4 @@ FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_pwr.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_pwr.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the PWR firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,7 +15,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
......@@ -303,4 +304,4 @@ void PWR_ClearFlag(uint32_t PWR_FLAG)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rcc.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_rcc.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the RCC firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,7 +15,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
......@@ -867,7 +868,7 @@ void RCC_LSICmd(FunctionalState NewState)
/**
* @brief Configures the RTC clock (RTCCLK).
* @note Once the RTC clock is selected it cant be changed unless the Backup domain is reset.
* @note Once the RTC clock is selected it can't be changed unless the Backup domain is reset.
* @param RCC_RTCCLKSource: specifies the RTC clock source.
* This parameter can be one of the following values:
* @arg RCC_RTCCLKSource_LSE: LSE selected as RTC clock
......@@ -1419,7 +1420,7 @@ ITStatus RCC_GetITStatus(uint8_t RCC_IT)
}
/**
* @brief Clears the RCCs interrupt pending bits.
* @brief Clears the RCC's interrupt pending bits.
* @param RCC_IT: specifies the interrupt pending bit to clear.
*
* For @b STM32_Connectivity_line_devices, this parameter can be any combination
......@@ -1466,4 +1467,4 @@ void RCC_ClearITPendingBit(uint8_t RCC_IT)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rtc.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_rtc.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the RTC firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,7 +15,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
......@@ -259,7 +260,7 @@ FlagStatus RTC_GetFlagStatus(uint16_t RTC_FLAG)
}
/**
* @brief Clears the RTCs pending flags.
* @brief Clears the RTC's pending flags.
* @param RTC_FLAG: specifies the flag to clear.
* This parameter can be any combination of the following values:
* @arg RTC_FLAG_RSF: Registers Synchronized flag. This flag is cleared only after
......@@ -274,12 +275,12 @@ void RTC_ClearFlag(uint16_t RTC_FLAG)
/* Check the parameters */
assert_param(IS_RTC_CLEAR_FLAG(RTC_FLAG));
/* Clear the coressponding RTC flag */
/* Clear the corresponding RTC flag */
RTC->CRL &= (uint16_t)~RTC_FLAG;
}
/**
* @brief Checks whether the specified RTC interrupt has occured or not.
* @brief Checks whether the specified RTC interrupt has occurred or not.
* @param RTC_IT: specifies the RTC interrupts sources to check.
* This parameter can be one of the following values:
* @arg RTC_IT_OW: Overflow interrupt
......@@ -306,7 +307,7 @@ ITStatus RTC_GetITStatus(uint16_t RTC_IT)
}
/**
* @brief Clears the RTCs interrupt pending bits.
* @brief Clears the RTC's interrupt pending bits.
* @param RTC_IT: specifies the interrupt pending bit to clear.
* This parameter can be any combination of the following values:
* @arg RTC_IT_OW: Overflow interrupt
......@@ -319,7 +320,7 @@ void RTC_ClearITPendingBit(uint16_t RTC_IT)
/* Check the parameters */
assert_param(IS_RTC_IT(RTC_IT));
/* Clear the coressponding RTC pending bit */
/* Clear the corresponding RTC pending bit */
RTC->CRL &= (uint16_t)~RTC_IT;
}
......@@ -335,4 +336,4 @@ void RTC_ClearITPendingBit(uint16_t RTC_IT)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_sdio.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_sdio.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the SDIO firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,7 +15,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
......@@ -550,7 +551,7 @@ void SDIO_StopSDIOReadWait(FunctionalState NewState)
/**
* @brief Sets one of the two options of inserting read wait interval.
* @param SDIO_ReadWaitMode: SD I/O Read Wait operation mode.
* This parametre can be:
* This parameter can be:
* @arg SDIO_ReadWaitMode_CLK: Read Wait control by stopping SDIOCLK
* @arg SDIO_ReadWaitMode_DATA2: Read Wait control using SDIO_DATA2
* @retval None
......@@ -757,7 +758,7 @@ ITStatus SDIO_GetITStatus(uint32_t SDIO_IT)
}
/**
* @brief Clears the SDIOs interrupt pending bits.
* @brief Clears the SDIO's interrupt pending bits.
* @param SDIO_IT: specifies the interrupt pending bit to clear.
* This parameter can be one or a combination of the following values:
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
......@@ -795,4 +796,4 @@ void SDIO_ClearITPendingBit(uint32_t SDIO_IT)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_spi.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_spi.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the SPI firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,7 +15,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
......@@ -283,7 +284,7 @@ void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct)
/* Get the value of the PLL3 multiplier */
if((tmp > 5) && (tmp < 15))
{
/* Multplier is between 8 and 14 (value 15 is forbidden) */
/* Multiplier is between 8 and 14 (value 15 is forbidden) */
tmp += 2;
}
else
......@@ -316,7 +317,7 @@ void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct)
sourceclock = RCC_Clocks.SYSCLK_Frequency;
#endif /* STM32F10X_CL */
/* Compute the Real divider depending on the MCLK output state with a flaoting point */
/* Compute the Real divider depending on the MCLK output state with a floating point */
if(I2S_InitStruct->I2S_MCLKOutput == I2S_MCLKOutput_Enable)
{
/* MCLK output is enabled */
......@@ -328,7 +329,7 @@ void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct)
tmp = (uint16_t)(((((sourceclock / (32 * packetlength)) *10 ) / I2S_InitStruct->I2S_AudioFreq)) + 5);
}
/* Remove the flaoting point */
/* Remove the floating point */
tmp = tmp / 10;
/* Check the parity of the divider */
......@@ -653,7 +654,7 @@ void SPI_TransmitCRC(SPI_TypeDef* SPIx)
}
/**
* @brief Enables or disables the CRC value calculation of the transfered bytes.
* @brief Enables or disables the CRC value calculation of the transferred bytes.
* @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
* @param NewState: new state of the SPIx CRC value calculation.
* This parameter can be: ENABLE or DISABLE.
......@@ -866,7 +867,7 @@ ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT)
* @param SPIx: where x can be
* - 1, 2 or 3 in SPI mode
* @param SPI_I2S_IT: specifies the SPI interrupt pending bit to clear.
* This function clears only CRCERR intetrrupt pending bit.
* This function clears only CRCERR interrupt pending bit.
* @note
* - OVR (OverRun Error) interrupt pending bit is cleared by software
* sequence: a read operation to SPI_DR register (SPI_I2S_ReceiveData())
......@@ -904,4 +905,4 @@ void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_tim.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_tim.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the TIM firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,7 +15,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
......@@ -218,7 +219,8 @@ void TIM_DeInit(TIM_TypeDef* TIMx)
* the specified parameters in the TIM_TimeBaseInitStruct.
* @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
* @param TIM_TimeBaseInitStruct: pointer to a TIM_TimeBaseInitTypeDef
* structure that contains the configuration information for the specified TIM peripheral.
* structure that contains the configuration information for the
* specified TIM peripheral.
* @retval None
*/
void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct)
......@@ -326,7 +328,7 @@ void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
/* Set the Output N State */
tmpccer |= TIM_OCInitStruct->TIM_OutputNState;
/* Reset the Ouput Compare and Output Compare N IDLE State */
/* Reset the Output Compare and Output Compare N IDLE State */
tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS1));
tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS1N));
......@@ -409,7 +411,7 @@ void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
/* Set the Output N State */
tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 4);
/* Reset the Ouput Compare and Output Compare N IDLE State */
/* Reset the Output Compare and Output Compare N IDLE State */
tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS2));
tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS2N));
......@@ -489,7 +491,7 @@ void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
/* Set the Output N State */
tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 8);
/* Reset the Ouput Compare and Output Compare N IDLE State */
/* Reset the Output Compare and Output Compare N IDLE State */
tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS3));
tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS3N));
/* Set the Output Idle state */
......@@ -556,7 +558,7 @@ void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
if((TIMx == TIM1) || (TIMx == TIM8))
{
assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState));
/* Reset the Ouput Compare IDLE State */
/* Reset the Output Compare IDLE State */
tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS4));
/* Set the Output Idle state */
tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 6);
......@@ -762,7 +764,7 @@ void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct)
/**
* @brief Fills each TIM_ICInitStruct member with its default value.
* @param TIM_ICInitStruct : pointer to a TIM_ICInitTypeDef structure which will
* @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure which will
* be initialized.
* @retval None
*/
......@@ -915,7 +917,7 @@ void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource)
}
/**
* @brief Configures the TIMxs DMA interface.
* @brief Configures the TIMx's DMA interface.
* @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 15, 16 or 17 to select
* the TIM peripheral.
* @param TIM_DMABase: DMA Base address.
......@@ -929,7 +931,7 @@ void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource)
* TIM_DMABase_DCR.
* @param TIM_DMABurstLength: DMA Burst length.
* This parameter can be one value between:
* TIM_DMABurstLength_1Byte and TIM_DMABurstLength_18Bytes.
* TIM_DMABurstLength_1Transfer and TIM_DMABurstLength_18Transfers.
* @retval None
*/
void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength)
......@@ -943,7 +945,7 @@ void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurs
}
/**
* @brief Enables or disables the TIMxs DMA Requests.
* @brief Enables or disables the TIMx's DMA Requests.
* @param TIMx: where x can be 1, 2, 3, 4, 5, 6, 7, 8, 15, 16 or 17
* to select the TIM peripheral.
* @param TIM_DMASource: specifies the DMA Request sources.
......@@ -979,7 +981,7 @@ void TIM_DMACmd(TIM_TypeDef* TIMx, uint16_t TIM_DMASource, FunctionalState NewSt
}
/**
* @brief Configures the TIMx interrnal Clock
* @brief Configures the TIMx internal Clock
* @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15
* to select the TIM peripheral.
* @retval None
......@@ -1250,11 +1252,11 @@ void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource)
* @arg TIM_EncoderMode_TI12: Counter counts on both TI1FP1 and TI2FP2 edges depending
* on the level of the other input.
* @param TIM_IC1Polarity: specifies the IC1 Polarity
* This parmeter can be one of the following values:
* This parameter can be one of the following values:
* @arg TIM_ICPolarity_Falling: IC Falling edge.
* @arg TIM_ICPolarity_Rising: IC Rising edge.
* @param TIM_IC2Polarity: specifies the IC2 Polarity
* This parmeter can be one of the following values:
* This parameter can be one of the following values:
* @arg TIM_ICPolarity_Falling: IC Falling edge.
* @arg TIM_ICPolarity_Rising: IC Rising edge.
* @retval None
......@@ -1795,7 +1797,7 @@ void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear)
* @brief Configures the TIMx channel 1 polarity.
* @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
* @param TIM_OCPolarity: specifies the OC1 Polarity
* This parmeter can be one of the following values:
* This parameter can be one of the following values:
* @arg TIM_OCPolarity_High: Output Compare active high
* @arg TIM_OCPolarity_Low: Output Compare active low
* @retval None
......@@ -1818,7 +1820,7 @@ void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity)
* @brief Configures the TIMx Channel 1N polarity.
* @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIM peripheral.
* @param TIM_OCNPolarity: specifies the OC1N Polarity
* This parmeter can be one of the following values:
* This parameter can be one of the following values:
* @arg TIM_OCNPolarity_High: Output Compare active high
* @arg TIM_OCNPolarity_Low: Output Compare active low
* @retval None
......@@ -1842,7 +1844,7 @@ void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity)
* @brief Configures the TIMx channel 2 polarity.
* @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
* @param TIM_OCPolarity: specifies the OC2 Polarity
* This parmeter can be one of the following values:
* This parameter can be one of the following values:
* @arg TIM_OCPolarity_High: Output Compare active high
* @arg TIM_OCPolarity_Low: Output Compare active low
* @retval None
......@@ -1865,7 +1867,7 @@ void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity)
* @brief Configures the TIMx Channel 2N polarity.
* @param TIMx: where x can be 1 or 8 to select the TIM peripheral.
* @param TIM_OCNPolarity: specifies the OC2N Polarity
* This parmeter can be one of the following values:
* This parameter can be one of the following values:
* @arg TIM_OCNPolarity_High: Output Compare active high
* @arg TIM_OCNPolarity_Low: Output Compare active low
* @retval None
......@@ -1889,7 +1891,7 @@ void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity)
* @brief Configures the TIMx channel 3 polarity.
* @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
* @param TIM_OCPolarity: specifies the OC3 Polarity
* This parmeter can be one of the following values:
* This parameter can be one of the following values:
* @arg TIM_OCPolarity_High: Output Compare active high
* @arg TIM_OCPolarity_Low: Output Compare active low
* @retval None
......@@ -1912,7 +1914,7 @@ void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity)
* @brief Configures the TIMx Channel 3N polarity.
* @param TIMx: where x can be 1 or 8 to select the TIM peripheral.
* @param TIM_OCNPolarity: specifies the OC3N Polarity
* This parmeter can be one of the following values:
* This parameter can be one of the following values:
* @arg TIM_OCNPolarity_High: Output Compare active high
* @arg TIM_OCNPolarity_Low: Output Compare active low
* @retval None
......@@ -1937,7 +1939,7 @@ void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity)
* @brief Configures the TIMx channel 4 polarity.
* @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
* @param TIM_OCPolarity: specifies the OC4 Polarity
* This parmeter can be one of the following values:
* This parameter can be one of the following values:
* @arg TIM_OCPolarity_High: Output Compare active high
* @arg TIM_OCPolarity_Low: Output Compare active low
* @retval None
......@@ -1960,7 +1962,7 @@ void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity)
* @brief Enables or disables the TIM Capture Compare Channel x.
* @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
* @param TIM_Channel: specifies the TIM Channel
* This parmeter can be one of the following values:
* This parameter can be one of the following values:
* @arg TIM_Channel_1: TIM Channel 1
* @arg TIM_Channel_2: TIM Channel 2
* @arg TIM_Channel_3: TIM Channel 3
......@@ -1991,7 +1993,7 @@ void TIM_CCxCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx)
* @brief Enables or disables the TIM Capture Compare Channel xN.
* @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIM peripheral.
* @param TIM_Channel: specifies the TIM Channel
* This parmeter can be one of the following values:
* This parameter can be one of the following values:
* @arg TIM_Channel_1: TIM Channel 1
* @arg TIM_Channel_2: TIM Channel 2
* @arg TIM_Channel_3: TIM Channel 3
......@@ -2018,19 +2020,19 @@ void TIM_CCxNCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN)
}
/**
* @brief Selects the TIM Ouput Compare Mode.
* @note This function disables the selected channel before changing the Ouput
* @brief Selects the TIM Output Compare Mode.
* @note This function disables the selected channel before changing the Output
* Compare Mode.
* User has to enable this channel using TIM_CCxCmd and TIM_CCxNCmd functions.
* @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
* @param TIM_Channel: specifies the TIM Channel
* This parmeter can be one of the following values:
* This parameter can be one of the following values:
* @arg TIM_Channel_1: TIM Channel 1
* @arg TIM_Channel_2: TIM Channel 2
* @arg TIM_Channel_3: TIM Channel 3
* @arg TIM_Channel_4: TIM Channel 4
* @param TIM_OCMode: specifies the TIM Output Compare Mode.
* This paramter can be one of the following values:
* This parameter can be one of the following values:
* @arg TIM_OCMode_Timing
* @arg TIM_OCMode_Active
* @arg TIM_OCMode_Toggle
......@@ -2133,7 +2135,7 @@ void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource)
}
/**
* @brief Enables or disables the TIMxs Hall sensor interface.
* @brief Enables or disables the TIMx's Hall sensor interface.
* @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
* @param NewState: new state of the TIMx Hall sensor interface.
* This parameter can be: ENABLE or DISABLE.
......@@ -2157,7 +2159,7 @@ void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState)
}
/**
* @brief Selects the TIMxs One Pulse Mode.
* @brief Selects the TIMx's One Pulse Mode.
* @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
* @param TIM_OPMode: specifies the OPM Mode to be used.
* This parameter can be one of the following values:
......@@ -2212,7 +2214,7 @@ void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource)
* @brief Selects the TIMx Slave Mode.
* @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
* @param TIM_SlaveMode: specifies the Timer Slave Mode.
* This paramter can be one of the following values:
* This parameter can be one of the following values:
* @arg TIM_SlaveMode_Reset: Rising edge of the selected trigger signal (TRGI) re-initializes
* the counter and triggers an update of the registers.
* @arg TIM_SlaveMode_Gated: The counter clock is enabled when the trigger signal (TRGI) is high.
......@@ -2235,7 +2237,7 @@ void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode)
* @brief Sets or Resets the TIMx Master/Slave Mode.
* @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
* @param TIM_MasterSlaveMode: specifies the Timer Master Slave Mode.
* This paramter can be one of the following values:
* This parameter can be one of the following values:
* @arg TIM_MasterSlaveMode_Enable: synchronization between the current timer
* and its slaves (through TRGO).
* @arg TIM_MasterSlaveMode_Disable: No action
......@@ -2885,4 +2887,4 @@ static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_usart.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_usart.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the USART firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,7 +15,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
......@@ -122,7 +123,8 @@
/**
* @brief Deinitializes the USARTx peripheral registers to their default reset values.
* @param USARTx: Select the USART or the UART peripheral.
* This parameter can be one of the following values: USART1, USART2, USART3, UART4 or UART5.
* This parameter can be one of the following values:
* USART1, USART2, USART3, UART4 or UART5.
* @retval None
*/
void USART_DeInit(USART_TypeDef* USARTx)
......@@ -167,7 +169,8 @@ void USART_DeInit(USART_TypeDef* USARTx)
* This parameter can be one of the following values:
* USART1, USART2, USART3, UART4 or UART5.
* @param USART_InitStruct: pointer to a USART_InitTypeDef structure
* that contains the configuration information for the specified USART peripheral.
* that contains the configuration information for the specified USART
* peripheral.
* @retval None
*/
void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct)
......@@ -293,7 +296,7 @@ void USART_StructInit(USART_InitTypeDef* USART_InitStruct)
* @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef
* structure that contains the configuration information for the specified
* USART peripheral.
* @note The Smart Card mode is not available for UART4 and UART5.
* @note The Smart Card and Synchronous modes are not available for UART4 and UART5.
* @retval None
*/
void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct)
......@@ -372,7 +375,7 @@ void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState)
* This parameter can be one of the following values:
* @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
* @arg USART_IT_LBD: LIN Break detection interrupt
* @arg USART_IT_TXE: Tansmit Data Register empty interrupt
* @arg USART_IT_TXE: Transmit Data Register empty interrupt
* @arg USART_IT_TC: Transmission complete interrupt
* @arg USART_IT_RXNE: Receive Data register not empty interrupt
* @arg USART_IT_IDLE: Idle line detection interrupt
......@@ -749,7 +752,7 @@ void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState)
* @param USARTx: Select the USART or the UART peripheral.
* This parameter can be one of the following values:
* USART1, USART2, USART3, UART4 or UART5.
* @param NewState: new state of the USART one bit sampling methode.
* @param NewState: new state of the USART one bit sampling method.
* This parameter can be: ENABLE or DISABLE.
* @note
* This function has to be called before calling USART_Init()
......@@ -775,11 +778,11 @@ void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState)
}
/**
* @brief Enables or disables the USART's one bit sampling methode.
* @brief Enables or disables the USART's one bit sampling method.
* @param USARTx: Select the USART or the UART peripheral.
* This parameter can be one of the following values:
* USART1, USART2, USART3, UART4 or UART5.
* @param NewState: new state of the USART one bit sampling methode.
* @param NewState: new state of the USART one bit sampling method.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
......@@ -802,7 +805,7 @@ void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState)
}
/**
* @brief Configures the USARTs IrDA interface.
* @brief Configures the USART's IrDA interface.
* @param USARTx: Select the USART or the UART peripheral.
* This parameter can be one of the following values:
* USART1, USART2, USART3, UART4 or UART5.
......@@ -823,7 +826,7 @@ void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode)
}
/**
* @brief Enables or disables the USARTs IrDA interface.
* @brief Enables or disables the USART's IrDA interface.
* @param USARTx: Select the USART or the UART peripheral.
* This parameter can be one of the following values:
* USART1, USART2, USART3, UART4 or UART5.
......@@ -998,7 +1001,7 @@ ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT)
}
/**
* @brief Clears the USARTxs interrupt pending bits.
* @brief Clears the USARTx's interrupt pending bits.
* @param USARTx: Select the USART or the UART peripheral.
* This parameter can be one of the following values:
* USART1, USART2, USART3, UART4 or UART5.
......@@ -1052,4 +1055,4 @@ void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_wwdg.c
浏览文件 @ 3d4e5e1f
......@@ -2,11 +2,11 @@
******************************************************************************
* @file stm32f10x_wwdg.c
* @author MCD Application Team
* @version V3.4.0
* @date 10/15/2010
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the WWDG firmware functions.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -15,7 +15,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
......@@ -220,4 +221,4 @@ void WWDG_ClearFlag(void)
* @}
*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
bsp/stm32f107/SConscript
浏览文件 @ 3d4e5e1f
......@@ -2,7 +2,7 @@ import rtconfig
Import('RTT_ROOT')
from building import *
src_bsp = ['application.c', 'startup.c', 'board.c', 'stm32f10x_it.c', 'system_stm32f10x.c']
src_bsp = ['application.c', 'startup.c', 'board.c', 'stm32f10x_it.c']
src_drv = ['usart.c', 'serial.c']
if GetDepend('RT_USING_DFS'):
......@@ -12,8 +12,8 @@ if GetDepend('RT_USING_LWIP'):
src_drv += ['stm32_eth.c']
src = src_bsp + src_drv
CPPPATH = [str(Dir('#'))]
CPPDEFINES = ['USE_STDPERIPH_DRIVER', rtconfig.STM32_TYPE]
CPPPATH = [GetCurrentDir()]
CPPDEFINES = []
group = DefineGroup('Startup', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES = CPPDEFINES)
Return('group')
bsp/stm32f107/project.uvopt
浏览文件 @ 3d4e5e1f
此差异已折叠。
bsp/stm32f107/project.uvproj
浏览文件 @ 3d4e5e1f
......@@ -117,7 +117,7 @@
<Simulator>
<UseSimulator>0</UseSimulator>
<LoadApplicationAtStartup>1</LoadApplicationAtStartup>
<RunToMain>0</RunToMain>
<RunToMain>1</RunToMain>
<RestoreBreakpoints>1</RestoreBreakpoints>
<RestoreWatchpoints>1</RestoreWatchpoints>
<RestoreMemoryDisplay>1</RestoreMemoryDisplay>
......@@ -160,7 +160,7 @@
<RunIndependent>0</RunIndependent>
<UpdateFlashBeforeDebugging>0</UpdateFlashBeforeDebugging>
<Capability>1</Capability>
<DriverSelection>4098</DriverSelection>
<DriverSelection>4099</DriverSelection>
</Flash1>
<Flash2>Segger\JL2CM3.dll</Flash2>
<Flash3>"" ()</Flash3>
......@@ -346,7 +346,7 @@
<MiscControls></MiscControls>
<Define>STM32F10X_CL, USE_STDPERIPH_DRIVER</Define>
<Undefine></Undefine>
<IncludePath>..\stm3210\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x;..\..\components\net\lwip\src\arch\include;..\..\components\finsh;..\..\components\net\lwip\src\include;.;..\..\components\net\lwip\src\include\ipv4;..\..\include;..\stm3210\Libraries\STM32F10x_StdPeriph_Driver\inc;..\..\components\net\lwip\src;..\..\libcpu\arm\common;..\stm3210\Libraries\CMSIS\CM3\CoreSupport;..\..\libcpu\arm\stm32;..\..\components\net\lwip\src\include\netif</IncludePath>
<IncludePath>Libraries\STM32F10x_StdPeriph_Driver\inc;..\..\components\net\lwip\src\arch\include;..\..\components\finsh;..\..\components\net\lwip\src\include;.;..\..\components\net\lwip\src\include\ipv4;..\..\include;Libraries\CMSIS\CM3\CoreSupport;..\..\components\net\lwip\src;..\..\libcpu\arm\common;..\..\libcpu\arm\stm32;..\..\components\net\lwip\src\include\netif;Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x</IncludePath>
</VariousControls>
</Cads>
<Aads>
......@@ -406,11 +406,6 @@
<FileType>1</FileType>
<FilePath>.\stm32f10x_it.c</FilePath>
</File>
<File>
<FileName>system_stm32f10x.c</FileName>
<FileType>1</FileType>
<FilePath>.\system_stm32f10x.c</FilePath>
</File>
<File>
<FileName>usart.c</FileName>
<FileType>1</FileType>
......@@ -521,11 +516,6 @@
<FileType>2</FileType>
<FilePath>..\..\libcpu\arm\stm32\context_rvds.S</FilePath>
</File>
<File>
<FileName>start_rvds.S</FileName>
<FileType>2</FileType>
<FilePath>..\..\libcpu\arm\stm32\start_rvds.S</FilePath>
</File>
<File>
<FileName>backtrace.c</FileName>
<FileType>1</FileType>
......@@ -801,6 +791,11 @@
<FileType>1</FileType>
<FilePath>Libraries\CMSIS\CM3\CoreSupport\core_cm3.c</FilePath>
</File>
<File>
<FileName>system_stm32f10x.c</FileName>
<FileType>1</FileType>
<FilePath>Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\system_stm32f10x.c</FilePath>
</File>
<File>
<FileName>stm32f10x_crc.c</FileName>
<FileType>1</FileType>
......@@ -916,6 +911,11 @@
<FileType>1</FileType>
<FilePath>Libraries\STM32F10x_StdPeriph_Driver\src\misc.c</FilePath>
</File>
<File>
<FileName>startup_stm32f10x_cl.s</FileName>
<FileType>2</FileType>
<FilePath>Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_cl.s</FilePath>
</File>
</Files>
</Group>
</Groups>
......
bsp/stm32f107/rtconfig.h
浏览文件 @ 3d4e5e1f
......@@ -75,13 +75,20 @@
/* SECTION: device filesystem */
/* #define RT_USING_DFS */
#define RT_USING_DFS_ELMFAT
#define RT_DFS_ELM_WORD_ACCESS
/* Reentrancy (thread safe) of the FatFs module. */
#define RT_DFS_ELM_REENTRANT
/* Number of volumes (logical drives) to be used. */
#define RT_DFS_ELM_DRIVES 2
/* #define RT_DFS_ELM_USE_LFN 1 */
#define RT_DFS_ELM_MAX_LFN 255
/* Maximum sector size to be handled. */
#define RT_DFS_ELM_MAX_SECTOR_SIZE 512
/* the max number of mounted filesystem */
#define DFS_FILESYSTEMS_MAX 2
/* the max number of opened files */
#define DFS_FD_MAX 4
/* the max number of cached sector */
#define DFS_CACHE_MAX_NUM 4
/* SECTION: lwip, a lighwight TCP/IP protocol stack */
#define RT_USING_LWIP
......
bsp/stm32f107/rtconfig.py
浏览文件 @ 3d4e5e1f
......@@ -3,15 +3,18 @@ ARCH='arm'
CPU='stm32'
CROSS_TOOL='keil'
# cross_tool provides the cross compiler
# EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR
if CROSS_TOOL == 'gcc':
PLATFORM = 'gcc'
EXEC_PATH = 'D:/SourceryGCC/bin'
EXEC_PATH = 'E:/Program Files/CodeSourcery/Sourcery G++ Lite/bin'
elif CROSS_TOOL == 'keil':
PLATFORM = 'armcc'
EXEC_PATH = 'E:/Keil'
elif CROSS_TOOL == 'iar':
PLATFORM = 'iar'
IAR_PATH = 'C:/Program Files/IAR Systems/Embedded Workbench 5.4 Evaluation_0'
IAR_PATH = 'E:/Program Files/IAR Systems/Embedded Workbench 6.0'
BUILD = 'debug'
STM32_TYPE = 'STM32F10X_CL'
......
bsp/stm32f107/stm32f10x_it.c
浏览文件 @ 3d4e5e1f
/**
******************************************************************************
* @file Project/Template/stm32f10x_it.c
* @file Project/STM32F10x_StdPeriph_Template/stm32f10x_it.c
* @author MCD Application Team
* @version V3.1.0
* @date 06/19/2009
* @version V3.5.0
* @date 08-April-2011
* @brief Main Interrupt Service Routines.
* This file provides template for all exceptions handler and
* peripherals interrupt service routine.
******************************************************************************
* @copy
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
......@@ -17,7 +17,8 @@
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
......@@ -49,19 +50,6 @@ void NMI_Handler(void)
{
}
/**
* @brief This function handles Hard Fault exception.
* @param None
* @retval None
*/
void HardFault_Handler(void)
{
/* Go to infinite loop when Hard Fault exception occurs */
while (1)
{
}
}
/**
* @brief This function handles Memory Manage exception.
* @param None
......@@ -119,6 +107,12 @@ void DebugMon_Handler(void)
{
}
void SysTick_Handler(void)
{
extern void rt_hw_timer_handler(void);
rt_hw_timer_handler();
}
/******************************************************************************/
/* STM32F10x Peripherals Interrupt Handlers */
/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */
......
bsp/stm32f107/system_stm32f10x.c 已删除 100644 → 0
浏览文件 @ 311e6695
此差异已折叠。
bsp/stm32f107/template.Uv2 已删除 100644 → 0
浏览文件 @ 311e6695
此差异已折叠。
bsp/stm32f107/template.uvopt 0 → 100644
浏览文件 @ 3d4e5e1f
此差异已折叠。
bsp/stm32f107/template.uvproj 0 → 100644
浏览文件 @ 3d4e5e1f
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或