* [libcpu][riscv]移除ch32中的冗余文件,使用common下的文件

* 修正cpuport.h宏定义

* 规范宏定义格式

【1】添加ch32v208-r0 bsp
【2】合并libcpu/riscv 下ch系列mcu的port文件

* [smart/aarch64] sync aarch64

* [rtdef] rename RT_WEAK attribute as rt_weak

* [rtdef] rename RT_USED attribute as rt_used

* [rtdef] rename RT_SECTION attribute as rt_section

* [rtdef] rename ALIGN attribute as rt_align

* [legacy] add RT_USED ALIGN RT_SECTION RT_WEAK as legacy support

* 添加了硬件spi驱动

* 修改ry命令，已便于自定义保存路径

* modified:   components/utilities/ymodem/ry_sy.c

* 修复从被动错误恢复后发送返回异常

* 修复在自动重传模式下,ACK异常阻塞线程
- 删除TX中断函数else分支。仅当RQCP位 置一才进入该中断
- 添加SCE中断函数中关于ACK_ERR的else判断。自动重传模式下会进入该判断,打断自动重传释放完成量。

* 增加对于CAN1与CAN2的SCE中断和TX中断的公共处理函数

* formatting格式化代码

* update struct can_filter_item and rt_can_msg
1. 对过滤器号和索引号结构体定义中同一名称hdr进行重命名hdr_bank和hdr_index,
以便准确区分.采用宏定义兼容以前变量名.
2. 添加接收标识rxfifo,已指明是哪个RXFIFO.

* 更正42M下的波特率

* 修复接收获取索引号错误

* 添加接收标识

* 更新注释

* 取消CANFD限制

* update struct can_filter_item and rt_can_msg

* replaced the judgement of RT_USING_XXX  with  BSP_USING, and add some tips in Konfig about soft_i2c

* 新增硬件定时器功能

* 新增定时器功能

* Update Kconfig

* Update bsp/wch/risc-v/Libraries/ch32_drivers/drv_hwtimer.h
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

* Update Kconfig

* 添加剩余的PWM设备，并为每个PWM设备添加条件编译，减少代码量

* Update drv_pwm.c

* 根据建议进行修改

* 已根据建议修改

* Update bsp/wch/risc-v/Libraries/ch32_drivers/drv_pwm.c
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

* Update bsp/wch/risc-v/Libraries/ch32_drivers/drv_pwm.h
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

* Update bsp/wch/risc-v/Libraries/ch32_drivers/drv_pwm.c
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

新增CH32V307的硬件定时器功能，并在CH32V307V-R1-1V0板卡上进行了测试。

* [bsp][ch32v307]添加了 pwm 驱动

CH32V307 添加can驱动。
CAN1和CAN2均可以使用，而且调整好波特率

* 修改RT_USING为BSP_USING

* Update SConscript

* Update SConscript
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

添加了 ch32v307 看门狗驱动，已在 ch32v307评估板验证；
修改了 rt-thread\bsp\wch\risc-v\ch32v307v-r1\board 目录下的 Kconfig 文件；
修改了 rt-thread\bsp\wch\risc-v\Libraries\ch32_drivers 目录下的 SConscript 文件；
添加了 rt-thread\bsp\wch\risc-v\Libraries\ch32_drivers 目录下的 drv_iwdt.c 文件；

添加了ch32v307的adc驱动，已在ch32v307评估班上对adc1ch5进行了验证，并修改了kconfig以及scons脚本，可以成功编译以及使用

* Update drv_usart.h

CH32V307的串口1外设是对接在APB2桥上，其他串口均对接在APB1桥上

已完全测试，并发现一个问题，已修正。

* 修改Kconfig的不足

* update gpio driver

* formatting code

ch569w-evt: add usbhs device mode driver

* usbd driver tested with cdc_vcom, internal loopback
  (can't run both MSH & usbd due to 16KB RAM limitation)
* reduce usrstack & main thread stack size for usbd test
* ch56x_uart.c : iron out UART0_PIN_ALT assignment

* add ch32v307 lib

* fix scons

add PWM driver, output checked with logic analyzer
spi_xfer() bug fix for cs_pin and message looping
uart pin_mode init moved to uart driver

* ch569w-evt : add spi master driver, SPI0 tested

* Update bsp/wch/risc-v/ch569w-evt/board/Kconfig

* Update bsp/wch/risc-v/ch569w-evt/board/Kconfig
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

WCH CH569W-R0-1v0 evt board bsp port, first version

dev/test under Ubuntu 20.04
toolchain from MounRiver_Studio_Community_Linux_x64_V120

tested drivers : SysTick, gpio, gpio interrupt, uart1 (RX interrupt, TX polling)

libcpu/risc-v/SConscript :
group includes rtconfig.CPU only if folder exists

libcpu/risc-v/common/cpuport.c/rt_hw_context_switch_interrupt() :
make it RT_WEAK for customization

feat: move MRS demo source to bsp and libraries folder

feat: update Sconscript

feat: modify SConstruct in the bsp

feat: use the rtconfig.py of gd32vf103v-eval bsp to modify

feat: use the MRS's rtconfig.h temoporarily

feat: update Kconfig files

feat: use the MRS's .ld and rename as link.lds

feat: add ch32v1 porting folder

perf: remove board/system_ch32v10x.c

fix: define SOC_ARM_SERIES_CH32V103 in rtconfig.h

fix: add some neccessary macros in rtconfig.h

perf: use the menuconfig to generate rtconfig.h

feat: add readme.md

fix: correct the bad encode in main.c

fix: include board.h in main.c

perf: check and update README.md

perf: remove ch32f10x_port_cn.md

feat: ignore the standard libraries's CI checking

feat: add sdk_dist.py

fix: correct some style errors again

perf: simply the board/kconfig

fix: format ch32v103r-evt

fix: format drvs and libcpu