- 02 7月, 2017 1 次提交
-
-
由 Matthew Draper 提交于
This reverts commit 3420a145, reversing changes made to afb66a5a.
-
- 01 7月, 2017 1 次提交
-
-
由 Kir Shatrov 提交于
-
- 24 5月, 2017 1 次提交
-
-
由 Koichi ITO 提交于
-
- 11 5月, 2017 1 次提交
-
-
由 Akira Matsuda 提交于
Because we don't need to load tasks for DBs that we don't use for the current app. Also, these Tasks classes load AR::Base in their class level, and so immediately kick :active_record on_load hooks. This used to happen when we were loading tasks, not when we run a task.
-
- 27 4月, 2017 1 次提交
-
-
由 bogdanvlviv 提交于
Set consistent type cast ENV["VERBOSE"]: ENV["VERBOSE"] is true if it not equal "false"
-
- 27 3月, 2017 1 次提交
-
-
由 Philippe Guay 提交于
Add stronger assertions to rake migration tasks to make sure the user is providing a numeric VERSION An empty string was getting converted to version = 0. This would in turn pass the presence check. Address linting warning Add test for rake task and refactor code to meet expectations In particular passing VERSION=0 should not raise an error. Addressed Comments for PR #28485. Trimmed empty lines + change of wording for error message Adjust test for change of wording in error message Change condition to follow rails idioms
-
- 12 1月, 2017 1 次提交
-
-
由 Akira Matsuda 提交于
(I personally prefer writing one string in one line no matter how long it is, though)
-
- 04 1月, 2017 1 次提交
-
-
由 Rafael Mendonça França 提交于
-
- 02 1月, 2017 1 次提交
-
-
由 Kir Shatrov 提交于
Today `rake db:schema:cache:dump` only supports dumping cache for a single connection (`ActiveRecord::Base.connection`). This doesn't work for apps with multiple databases. This PR makes `DatabaseTasks` to provide an API for dumping schema cache for any connection.
-
- 30 12月, 2016 1 次提交
-
-
由 Rafael Mendonça França 提交于
-
- 23 12月, 2016 1 次提交
-
-
由 Kir Shatrov 提交于
Without this patch it's impossible to pass extra flags to mysqldump/pg_dump when running `rake db:structure:dump` or `load` The following config variables (`structure_load_flags` and `structure_dump_flags`) make it better configurable.
-
- 29 10月, 2016 1 次提交
-
-
由 Rafael Mendonça França 提交于
-
- 08 8月, 2016 1 次提交
-
-
由 Xavier Noria 提交于
Some case expressions remain, need to think about those ones.
-
- 07 8月, 2016 3 次提交
-
-
由 Xavier Noria 提交于
-
由 Xavier Noria 提交于
-
由 Xavier Noria 提交于
The current code base is not uniform. After some discussion, we have chosen to go with double quotes by default.
-
- 25 5月, 2016 2 次提交
-
-
由 Arthur Neves 提交于
-
由 Arthur Neves 提交于
Instead of passing a separete name variable, we can make the resolver merge a name on the config, and use that before creating the Specification.
-
- 07 5月, 2016 1 次提交
-
-
由 Arthur Neves 提交于
-
- 06 5月, 2016 2 次提交
-
-
由 Arthur Neves 提交于
-
由 Arthur Neves 提交于
-
- 18 4月, 2016 1 次提交
-
-
由 bogdanvlviv 提交于
-
- 25 3月, 2016 1 次提交
-
-
由 Chris Arcand 提交于
Without clearing the caches afterward, removals done in migrations would not be reflected in a separate task in the same process. That is, given a table with a migration to remove a column, the schema cache would still reflect that a table has that in something such as the 'db:seed' task: `rake db:migrate db:seed` (A common thing to do in a script for a project ala `bin/setup`) vs `rake db:migrate && rake db:seed` (Two processes) The first would not reflect that the column was removed. The second would (cache reset).
-
- 15 3月, 2016 1 次提交
-
-
由 Rafael Mendonça França 提交于
This reverts a334425c. The main reason is that now the workflow is inconsistent when using spring. When using spring `RAILS_ENV` is always set, so only one database is created. This means that in development `bin/rake db:create` and `bundle exec rake db:create` have different results. It also breaks the `bin/setup` script since `bin/rake db:setup db:test:prepare` will fail.
-
- 24 2月, 2016 1 次提交
-
-
由 Aaron Patterson 提交于
creating all databases mutates the connection pool. This patch restores the connection pool to the connection spec established before creating all databases. Fixes #23279
-
- 09 1月, 2016 2 次提交
-
-
由 yuuji.yaginuma 提交于
The error message has become a `DISABLE_DATABASE_ENVIRONMENT_CHECK`, modified to match the error message. ref: https://github.com/rails/rails/blob/master/activerecord/lib/active_record/migration.rb#L161
-
由 schneems 提交于
-
- 08 1月, 2016 3 次提交
-
-
由 schneems 提交于
Discussion: https://github.com/rails/rails/pull/22967#discussion_r49137035
-
由 schneems 提交于
Raise an error when a destructive action is made on a database where the current environment is different from the environment stored in the database.
-
由 schneems 提交于
This PR introduces a key/value type store to Active Record that can be used for storing internal values. It is an alternative implementation to #21237 cc @sgrif @matthewd. It is possible to run your tests against your production database by accident right now. While infrequently, but as an anecdotal data point, Heroku receives a non-trivial number of requests for a database restore due to this happening. In these cases the loss can be large. To prevent against running tests against production we can store the "environment" version that was used when migrating the database in a new internal table. Before executing tests we can see if the database is a listed in `protected_environments` and abort. There is a manual escape valve to force this check from happening with environment variable `DISABLE_DATABASE_ENVIRONMENT_CHECK=1`.
-
- 18 12月, 2015 1 次提交
-
-
由 David Heinemeier Hansson 提交于
Still more to do. Please assist!
-
- 21 10月, 2015 2 次提交
-
-
由 Jay Hayes 提交于
* If the drop task fails for a reason other than the database not existing, processing should end. This is indicated by a non-zero exit status. * Since the backtrace is already printed to screen, we forgo printing it again by using an explicit call to `exit`. *
⚠ This modifies the behavior of the db:create task slightly in that the stack trace is no longer printed by default. If the `--trace` option is used, it will print the trace _after_ the error message. -
由 Jay Hayes 提交于
* If the create task fails for a reason other than the database already existing, processing should end. This is indicated by a non-zero exit status. * Since the backtrace is already printed to screen, we forgo printing it again by using an explicit call to `exit`. *
⚠ This modifies the behavior of the db:create task slightly in that the stack trace is no longer printed by default. If the `--trace` option is used, it will print the trace _after_ the error message.
-
- 14 10月, 2015 2 次提交
-
-
由 Yves Senn 提交于
The focus of this change is to make the API more accessible. References to method and classes should be linked to make it easy to navigate around. This patch makes exzessiv use of `rdoc-ref:` to provide more readable docs. This makes it possible to document `ActiveRecord::Base#save` even though the method is within a separate module `ActiveRecord::Persistence`. The goal here is to bring the API closer to the actual code that you would write. This commit only deals with Active Record. The other gems will be updated accordingly but in different commits. The pass through Active Record is not completely finished yet. A follow up commit will change the spots I haven't yet had the time to update. /cc @fxn
-
由 Yves Senn 提交于
-
- 09 9月, 2015 1 次提交
-
-
由 Rafael Mendonça França 提交于
Usage was removed in 5c449553
-
- 07 9月, 2015 1 次提交
-
-
由 Tobias Bielohlawek 提交于
-
- 02 8月, 2015 1 次提交
-
-
由 starbelly 提交于
- Added run_cmd() class method to dry up Kernel.system() messages within this namespace and avoid shell expansion by passing a list of arguments instead of a string - Update structure_dump, structure_load, and related tests units to pass a list of params instead of using a string to avoid shell expansion
-
- 04 3月, 2015 1 次提交
-
-
由 James Cox 提交于
-
- 24 12月, 2014 1 次提交
-
-
由 Sean Griffin 提交于
This isn't Seattle.rb, @senny. ;)
-