deeplabv3p.py

#copyright (c) 2020 PaddlePaddle Authors. All Rights Reserve.
#
#Licensed under the Apache License, Version 2.0 (the "License");
#you may not use this file except in compliance with the License.
#You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
#Unless required by applicable law or agreed to in writing, software
#distributed under the License is distributed on an "AS IS" BASIS,
#WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#See the License for the specific language governing permissions and
#limitations under the License.

from __future__ import absolute_import
import os.path as osp
import numpy as np
import tqdm
import math
import cv2
import paddle.fluid as fluid
import paddlex.utils.logging as logging
import paddlex
from collections import OrderedDict
from .base import BaseAPI
from .utils.seg_eval import ConfusionMatrix
from .utils.visualize import visualize_segmentation


class DeepLabv3p(BaseAPI):
    """实现DeepLabv3+网络的构建并进行训练、评估、预测和模型导出。

    Args:
        num_classes (int): 类别数。
        backbone (str): DeepLabv3+的backbone网络，实现特征图的计算，取值范围为['Xception65', 'Xception41',
            'MobileNetV2_x0.25', 'MobileNetV2_x0.5', 'MobileNetV2_x1.0', 'MobileNetV2_x1.5',
            'MobileNetV2_x2.0']。默认'MobileNetV2_x1.0'。
        output_stride (int): backbone 输出特征图相对于输入的下采样倍数，一般取值为8或16。默认16。
        aspp_with_sep_conv (bool):  在asspp模块是否采用separable convolutions。默认True。
        decoder_use_sep_conv (bool)： decoder模块是否采用separable convolutions。默认True。
        encoder_with_aspp (bool): 是否在encoder阶段采用aspp模块。默认True。
        enable_decoder (bool): 是否使用decoder模块。默认True。
        use_bce_loss (bool): 是否使用bce loss作为网络的损失函数，只能用于两类分割。可与dice loss同时使用。默认False。
        use_dice_loss (bool): 是否使用dice loss作为网络的损失函数，只能用于两类分割，可与bce loss同时使用，
            当use_bce_loss和use_dice_loss都为False时，使用交叉熵损失函数。默认False。
        class_weight (list/str): 交叉熵损失函数各类损失的权重。当class_weight为list的时候，长度应为
            num_classes。当class_weight为str时， weight.lower()应为'dynamic'，这时会根据每一轮各类像素的比重
            自行计算相应的权重，每一类的权重为：每类的比例 * num_classes。class_weight取默认值None时，各类的权重1，
            即平时使用的交叉熵损失函数。
        ignore_index (int): label上忽略的值，label为ignore_index的像素不参与损失函数的计算。默认255。
    Raises:
        ValueError: use_bce_loss或use_dice_loss为真且num_calsses > 2。
        ValueError: backbone取值不在['Xception65', 'Xception41', 'MobileNetV2_x0.25',
            'MobileNetV2_x0.5', 'MobileNetV2_x1.0', 'MobileNetV2_x1.5', 'MobileNetV2_x2.0']之内。
        ValueError: class_weight为list, 但长度不等于num_class。
                class_weight为str, 但class_weight.low()不等于dynamic。
        TypeError: class_weight不为None时，其类型不是list或str。
    """

    def __init__(self,
                 num_classes=2,
                 backbone='MobileNetV2_x1.0',
                 output_stride=16,
                 aspp_with_sep_conv=True,
                 decoder_use_sep_conv=True,
                 encoder_with_aspp=True,
                 enable_decoder=True,
                 use_bce_loss=False,
                 use_dice_loss=False,
                 class_weight=None,
                 ignore_index=255):
        self.init_params = locals()
        super(DeepLabv3p, self).__init__('segmenter')
        # dice_loss或bce_loss只适用两类分割中
        if num_classes > 2 and (use_bce_loss or use_dice_loss):
            raise ValueError(
                "dice loss and bce loss is only applicable to binary classfication"
            )

        self.output_stride = output_stride

        if backbone not in [
                'Xception65', 'Xception41', 'MobileNetV2_x0.25',
                'MobileNetV2_x0.5', 'MobileNetV2_x1.0', 'MobileNetV2_x1.5',
                'MobileNetV2_x2.0'
        ]:
            raise ValueError(
                "backbone: {} is set wrong. it should be one of "
                "('Xception65', 'Xception41', 'MobileNetV2_x0.25', 'MobileNetV2_x0.5',"
                " 'MobileNetV2_x1.0', 'MobileNetV2_x1.5', 'MobileNetV2_x2.0')".
                format(backbone))

        if class_weight is not None:
            if isinstance(class_weight, list):
                if len(class_weight) != num_classes:
                    raise ValueError(
                        "Length of class_weight should be equal to number of classes"
                    )
            elif isinstance(class_weight, str):
                if class_weight.lower() != 'dynamic':
                    raise ValueError(
                        "if class_weight is string, must be dynamic!")
            else:
                raise TypeError(
                    'Expect class_weight is a list or string but receive {}'.
                    format(type(class_weight)))

        self.backbone = backbone
        self.num_classes = num_classes
        self.use_bce_loss = use_bce_loss
        self.use_dice_loss = use_dice_loss
        self.class_weight = class_weight
        self.ignore_index = ignore_index
        self.aspp_with_sep_conv = aspp_with_sep_conv
        self.decoder_use_sep_conv = decoder_use_sep_conv
        self.encoder_with_aspp = encoder_with_aspp
        self.enable_decoder = enable_decoder
        self.labels = None
        self.sync_bn = True
        self.fixed_input_shape = None

    def _get_backbone(self, backbone):
        def mobilenetv2(backbone):
            # backbone: xception结构配置
            # output_stride：下采样倍数
            # end_points: mobilenetv2的block数
            # decode_point: 从mobilenetv2中引出分支所在block数, 作为decoder输入
            if '0.25' in backbone:
                scale = 0.25
            elif '0.5' in backbone:
                scale = 0.5
            elif '1.0' in backbone:
                scale = 1.0
            elif '1.5' in backbone:
                scale = 1.5
            elif '2.0' in backbone:
                scale = 2.0
            end_points = 18
            decode_points = 4
            return paddlex.cv.nets.MobileNetV2(
                scale=scale,
                output_stride=self.output_stride,
                end_points=end_points,
                decode_points=decode_points)

        def xception(backbone):
            # decode_point: 从Xception中引出分支所在block数，作为decoder输入
            # end_point：Xception的block数
            if '65' in backbone:
                decode_points = 2
                end_points = 21
                layers = 65
            if '41' in backbone:
                decode_points = 2
                end_points = 13
                layers = 41
            if '71' in backbone:
                decode_points = 3
                end_points = 23
                layers = 71
            return paddlex.cv.nets.Xception(
                layers=layers,
                output_stride=self.output_stride,
                end_points=end_points,
                decode_points=decode_points)

        if 'Xception' in backbone:
            return xception(backbone)
        elif 'MobileNetV2' in backbone:
            return mobilenetv2(backbone)

    def build_net(self, mode='train'):
        model = paddlex.cv.nets.segmentation.DeepLabv3p(
            self.num_classes,
            mode=mode,
            backbone=self._get_backbone(self.backbone),
            output_stride=self.output_stride,
            aspp_with_sep_conv=self.aspp_with_sep_conv,
            decoder_use_sep_conv=self.decoder_use_sep_conv,
            encoder_with_aspp=self.encoder_with_aspp,
            enable_decoder=self.enable_decoder,
            use_bce_loss=self.use_bce_loss,
            use_dice_loss=self.use_dice_loss,
            class_weight=self.class_weight,
            ignore_index=self.ignore_index,
            fixed_input_shape=self.fixed_input_shape)
        inputs = model.generate_inputs()
        model_out = model.build_net(inputs)
        outputs = OrderedDict()
        if mode == 'train':
            self.optimizer.minimize(model_out)
            outputs['loss'] = model_out
        else:
            outputs['pred'] = model_out[0]
            outputs['logit'] = model_out[1]
        return inputs, outputs

    def default_optimizer(self,
                          learning_rate,
                          num_epochs,
                          num_steps_each_epoch,
                          lr_decay_power=0.9):
        decay_step = num_epochs * num_steps_each_epoch
        lr_decay = fluid.layers.polynomial_decay(
            learning_rate,
            decay_step,
            end_learning_rate=0,
            power=lr_decay_power)
        optimizer = fluid.optimizer.Momentum(
            lr_decay,
            momentum=0.9,
            regularization=fluid.regularizer.L2Decay(
                regularization_coeff=4e-05))
        return optimizer

    def train(self,
              num_epochs,
              train_dataset,
              train_batch_size=2,
              eval_dataset=None,
              save_interval_epochs=1,
              log_interval_steps=2,
              save_dir='output',
              pretrain_weights='IMAGENET',
              optimizer=None,
              learning_rate=0.01,
              lr_decay_power=0.9,
              use_vdl=False,
              sensitivities_file=None,
              eval_metric_loss=0.05,
              early_stop=False,
              early_stop_patience=5,
              resume_checkpoint=None):
        """训练。

        Args:
            num_epochs (int): 训练迭代轮数。
            train_dataset (paddlex.datasets): 训练数据读取器。
            train_batch_size (int): 训练数据batch大小。同时作为验证数据batch大小。默认为2。
            eval_dataset (paddlex.datasets): 评估数据读取器。
            save_interval_epochs (int): 模型保存间隔（单位：迭代轮数）。默认为1。
            log_interval_steps (int): 训练日志输出间隔（单位：迭代次数）。默认为2。
            save_dir (str): 模型保存路径。默认'output'。
            pretrain_weights (str): 若指定为路径时，则加载路径下预训练模型；若为字符串'IMAGENET'，
                则自动下载在ImageNet图片数据上预训练的模型权重；若为None，则不使用预训练模型。默认'IMAGENET。
            optimizer (paddle.fluid.optimizer): 优化器。当该参数为None时，使用默认的优化器：使用
                fluid.optimizer.Momentum优化方法，polynomial的学习率衰减策略。
            learning_rate (float): 默认优化器的初始学习率。默认0.01。
            lr_decay_power (float): 默认优化器学习率衰减指数。默认0.9。
            use_vdl (bool): 是否使用VisualDL进行可视化。默认False。
            sensitivities_file (str): 若指定为路径时，则加载路径下敏感度信息进行裁剪；若为字符串'DEFAULT'，
                则自动下载在ImageNet图片数据上获得的敏感度信息进行裁剪；若为None，则不进行裁剪。默认为None。
            eval_metric_loss (float): 可容忍的精度损失。默认为0.05。
            early_stop (bool): 是否使用提前终止训练策略。默认值为False。
            early_stop_patience (int): 当使用提前终止训练策略时，如果验证集精度在`early_stop_patience`个epoch内
                连续下降或持平，则终止训练。默认值为5。
            resume_checkpoint (str): 恢复训练时指定上次训练保存的模型路径。若为None，则不会恢复训练。默认值为None。

        Raises:
            ValueError: 模型从inference model进行加载。
        """
        if not self.trainable:
            raise ValueError("Model is not trainable from load_model method.")

        self.labels = train_dataset.labels

        if optimizer is None:
            num_steps_each_epoch = train_dataset.num_samples // train_batch_size
            optimizer = self.default_optimizer(
                learning_rate=learning_rate,
                num_epochs=num_epochs,
                num_steps_each_epoch=num_steps_each_epoch,
                lr_decay_power=lr_decay_power)

        self.optimizer = optimizer
        # 构建训练、验证、预测网络
        self.build_program()
        # 初始化网络权重
        self.net_initialize(
            startup_prog=fluid.default_startup_program(),
            pretrain_weights=pretrain_weights,
            save_dir=save_dir,
            sensitivities_file=sensitivities_file,
            eval_metric_loss=eval_metric_loss,
            resume_checkpoint=resume_checkpoint)
        # 训练
        self.train_loop(
            num_epochs=num_epochs,
            train_dataset=train_dataset,
            train_batch_size=train_batch_size,
            eval_dataset=eval_dataset,
            save_interval_epochs=save_interval_epochs,
            log_interval_steps=log_interval_steps,
            save_dir=save_dir,
            use_vdl=use_vdl,
            early_stop=early_stop,
            early_stop_patience=early_stop_patience)

    def evaluate(self,
                 eval_dataset,
                 batch_size=1,
                 epoch_id=None,
                 return_details=False):
        """评估。

        Args:
            eval_dataset (paddlex.datasets): 评估数据读取器。
            batch_size (int): 评估时的batch大小。默认1。
            epoch_id (int): 当前评估模型所在的训练轮数。
            return_details (bool): 是否返回详细信息。默认False。

        Returns:
            dict: 当return_details为False时，返回dict。包含关键字：'miou'、'category_iou'、'macc'、
                'category_acc'和'kappa'，分别表示平均iou、各类别iou、平均准确率、各类别准确率和kappa系数。
            tuple (metrics, eval_details)：当return_details为True时，增加返回dict (eval_details)，
                包含关键字：'confusion_matrix'，表示评估的混淆矩阵。
        """
        self.arrange_transforms(
            transforms=eval_dataset.transforms, mode='eval')
        total_steps = math.ceil(eval_dataset.num_samples * 1.0 / batch_size)
        conf_mat = ConfusionMatrix(self.num_classes, streaming=True)
        data_generator = eval_dataset.generator(
            batch_size=batch_size, drop_last=False)
        if not hasattr(self, 'parallel_test_prog'):
            self.parallel_test_prog = fluid.CompiledProgram(
                self.test_prog).with_data_parallel(
                    share_vars_from=self.parallel_train_prog)
        logging.info(
            "Start to evaluating(total_samples={}, total_steps={})...".format(
                eval_dataset.num_samples, total_steps))
        for step, data in tqdm.tqdm(
                enumerate(data_generator()), total=total_steps):
            images = np.array([d[0] for d in data])

            _, _, im_h, im_w = images.shape
            labels = list()
            for d in data:
                padding_label = np.zeros(
                    (1, im_h, im_w)).astype('int64') + self.ignore_index
                _, label_h, label_w = d[1].shape
                padding_label[:, :label_h, :label_w] = d[1]
                labels.append(padding_label)
            labels = np.array(labels)

            num_samples = images.shape[0]
            if num_samples < batch_size:
                num_pad_samples = batch_size - num_samples
                pad_images = np.tile(images[0:1], (num_pad_samples, 1, 1, 1))
                images = np.concatenate([images, pad_images])
            feed_data = {'image': images}
            outputs = self.exe.run(self.parallel_test_prog,
                                   feed=feed_data,
                                   fetch_list=list(self.test_outputs.values()),
                                   return_numpy=True)
            pred = outputs[0]
            if num_samples < batch_size:
                pred = pred[0:num_samples]

            mask = labels != self.ignore_index
            conf_mat.calculate(pred=pred, label=labels, ignore=mask)
            _, iou = conf_mat.mean_iou()

            logging.debug("[EVAL] Epoch={}, Step={}/{}, iou={}".format(
                epoch_id, step + 1, total_steps, iou))

        category_iou, miou = conf_mat.mean_iou()
        category_acc, macc = conf_mat.accuracy()

        metrics = OrderedDict(
            zip(['miou', 'category_iou', 'macc', 'category_acc', 'kappa'],
                [miou, category_iou, macc, category_acc, conf_mat.kappa()]))
        if return_details:
            eval_details = {
                'confusion_matrix': conf_mat.confusion_matrix.tolist()
            }
            return metrics, eval_details
        return metrics

    def predict(self, im_file, transforms=None):
        """预测。
        Args:
            img_file(str): 预测图像路径。
            transforms(paddlex.cv.transforms): 数据预处理操作。

        Returns:
            dict: 包含关键字'label_map'和'score_map', 'label_map'存储预测结果灰度图，
                像素值表示对应的类别，'score_map'存储各类别的概率，shape=(h, w, num_classes)
        """

        if transforms is None and not hasattr(self, 'test_transforms'):
            raise Exception("transforms need to be defined, now is None.")
        if transforms is not None:
            self.arrange_transforms(transforms=transforms, mode='test')
            im, im_info = transforms(im_file)
        else:
            self.arrange_transforms(
                transforms=self.test_transforms, mode='test')
            im, im_info = self.test_transforms(im_file)
        im = np.expand_dims(im, axis=0)
        result = self.exe.run(self.test_prog,
                              feed={'image': im},
                              fetch_list=list(self.test_outputs.values()),
                              use_program_cache=True)
        pred = result[0]
        pred = np.squeeze(pred).astype('uint8')
        logit = result[1]
        logit = np.squeeze(logit)
        logit = np.transpose(logit, (1, 2, 0))
        for info in im_info[::-1]:
            if info[0] == 'resize':
                w, h = info[1][1], info[1][0]
                pred = cv2.resize(pred, (w, h), cv2.INTER_NEAREST)
                logit = cv2.resize(logit, (w, h), cv2.INTER_LINEAR)
            elif info[0] == 'padding':
                w, h = info[1][1], info[1][0]
                pred = pred[0:h, 0:w]
                logit = logit[0:h, 0:w, :]
            else:
                raise Exception("Unexpected info '{}' in im_info".format(info[
                    0]))
        return {'label_map': pred, 'score_map': logit}