- 01 9月, 2021 11 次提交
-
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_MX7D Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Now that we have consistent usage, migrate this symbol to Kconfig. Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NRick Chen <rick@andestech.com>
-
由 Tom Rini 提交于
- In most of the codebase, we reference CONFIG_SYS_LOAD_ADDR and not CONFIG_LOADADDR. - Generally, CONFIG_SYS_LOADADDR is set to CONFIG_LOADADDR and then as noted, we use CONFIG_SYS_LOADADDR. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
All platforms define CONFIG_SYS_LOAD_ADDR, but only some define CONFIG_LOADADDR. Very very rarely are these not the same address, and qemu-ppce500 is one such case. However, based on reading the history of the code, this mismatched value was simply a copy-paste from other PowerPC platforms where it is this unused currently. Switch the code to use CONFIG_SYS_LOAD_ADDR and update the documentation. Cc: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
- Guard most of the options in drivers/ddr/fsl/Kconfig with SYS_FSL_DDR || SYS_FSL_MMDC. - Migrate FSL_DMA, DDR_ECC, DDR_ECC_CMD, and ECC_INIT_VIA_DDRCONTROLLER to Kconfig. - Clean up the logic for including the DDR_ECC_CMD code. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
As this symbol can either be a fixed value or the function get_board_ddr_clk, migration is tricky. Introduce a choice of DYNAMIC or STATIC_DDR_CLK_FREQ. If DYNAMIC, we continue to use the board defined get_board_ddr_clk function. If STATIC, set CONFIG_DDR_CLK_FREQ to that value and now include/clock_legacy.h contains the function prototype or defines get_board_ddr_clk() to that static value. Update callers to test for DYNAMIC or STATIC. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Move the symbol that controls building some JEDEC SPD support functions to Kconfig. This is required on the TI keystone 2 platforms and very frequently (but not always) used on large number of Freescale/NXP platforms, so use imply there. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Move this specific option to Kconfig. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
We have a number of CONFIG symbols to express the fixed size of system memory. For now, rename CONFIG_DDR_FIXED_SIZE to CONFIG_SYS_SDRAM_SIZE and adjust usage to match that CONFIG_SYS_SDRAM_SIZE expects the entire size rather than MiB. Cc: Marek Behún <marek.behun@nic.cz> Cc: Stefan Roese <sr@denx.de> Signed-off-by: NTom Rini <trini@konsulko.com> Acked-by: NMarek Behún <marek.behun@nic.cz>
-
由 Tom Rini 提交于
Move CONFIG_DDR_32BIT/64BIT to Kconfig as a choice for Armada XP platforms. Make 64bit the default as this mirrors the current code. Signed-off-by: NTom Rini <trini@konsulko.com> Acked-by: NMarek Behún <marek.behun@nic.cz> Reviewed-by: NStefan Roese <sr@denx.de>
-
- 31 8月, 2021 29 次提交
-
-
由 Tom Rini 提交于
These symbols are now either unused or were only used within the config file to determine other logic, which could be done in a way that doesn't further pollute the CONFIG namespace. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
- Begin merging some Kconfig migration, and CONFIG namespace cleanup series in. This gives us: - A number of I2C symbols migrated over - DWC2, i8042, altera_spi and a few other areas updated to use CFG not CONFIG for the concept of "configuration space" defines. - Rename CONFIG_EXTRA_ENV_BOARD_SETTINGS to EXTRA_ENV_BOARD_SETTINGS - Some dead code removal. - Rename a number of CONFIG symbols that were only referenced within the config header to not use CONFIG as a prefix.
-
由 Tom Rini 提交于
While the Kconfig language seems to accept either form of whitespace, we use a space throughout the project, except in these spots. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Rather than using CONFIG namespace for logic internal to include/configs/astro_mcf5373l.h to select ASTRO_ID (and populate the default environment), strip CONFIG from the various options used and set. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Update the comment here to refer to PCI_CONFIG_ADDRESS rather than CONFIG_ADDRESS. Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Tom Rini 提交于
The value CONFIG_ALTERA_SPI_IDLE_VAL is never re-defined by a board. Rename this to ALTERA_SPI_IDLE_VAL. Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Tom Rini 提交于
This driver is currently unused. Remove. Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Tom Rini 提交于
This removes a number of spots of dead code based on symbols that start with CONFIG_[0-9] or CONFIG_A. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This driver uses the CONFIG namespace to set the chips internal CONFIG namespace related bits. However, CONFIG is reserved for the top-level Kconfig based configuration system. Use CFG as the namespace here instead to avoid pollution. Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Tom Rini 提交于
There are an assortment of hard-coded CONFIG_BOOTCOMMAND options in some board headers. Rework these so that they do not add to the CONFIG namespace. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Migrate CONFIG_GICV2 and CONFIG_GICV3 to Kconfig. We still have the GIC related registers that need to be handled more cleanly but start by moving this symbol to Kconfig. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This driver uses the CONFIG namespace to set the chips internal CONFIG namespace related bits. However, CONFIG is reserved for the top-level Kconfig based configuration system. Use CFG as the namespace here instead to avoid pollution. Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Tom Rini 提交于
The platforms this code was for have been removed, drop this support code as well. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
These sections are no longer relevant, remove. Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_I2C_SET_DEFAULT_BUS_NUM CONFIG_I2C_DEFAULT_BUS_NUMBER Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Remove the irrelevant section from the README and remove the non-functional SPL-undef section. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
- As there are no boards that use different values for speed / slave on different buses, use a single option. - Switch to using the common SYS_I2C_SPEED / SYS_I2C_SLAVE options. - Introduce _HAS_ options for additional buses as only the first one is common to all users. - Convert all remaining symbols to Kconfig. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
- Migrate SYS_I2C_SH and related defines to Kconfig - Remove currently unused SYS_I2C_SH related defines - Cleanup related README section. Cc: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_SYS_I2C_MXC CONFIG_SYS_I2C_MXC_I2C1 CONFIG_SYS_I2C_MXC_I2C2 CONFIG_SYS_I2C_MXC_I2C3 CONFIG_SYS_I2C_MXC_I2C4 Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_SYS_I2C_SPEED CONFIG_SYS_I2C_SLAVE Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
There are no longer any cases where we are neither SYS_I2C_LEGACY nor DM_I2C. Remove these code paths. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This driver and it's only user are converted to DM_I2C, remove legacy code. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
The omap24xx I2C driver uses its own CONFIG namespace for common I2C variables. Rather than convert more of them to Kconfig, rename these to the common I2C ones and remove the entirely unused functionality. As part of this, we make the am335x_shc platforms consistent with their intended speed values. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
On this platform, we have DM_I2C and SPL_DM_I2C always enabled. Remove legacy options. Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: NTom Rini <trini@konsulko.com> Acked-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Tom Rini 提交于
On this platform, we have DM_I2C and SPL_DM_I2C always enabled. Remove legacy options. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
There are no users of more than 1 i2c bus in the non-DM case currently. Remove the additional defines for this. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Convert SYS_I2C_EARLY_INIT to Kconfig, and make it depend on SPL_SYS_I2C_LEGACY. Remove the weak implementation as it's either something that needs to exist for real, or shouldn't be called. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig. Next, as you cannot have SYS_I2C_LEGACY and DM_I2C at the same time, introduce CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only in SPL. Finally, for some PowerPC cases we also need CONFIG_TPL_SYS_I2C_LEGACY support. Convert all of the existing users to one or more symbols. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Currently the legacy software i2c support is only used for a single bus. Remove all of the extra and unused support. Also update the README to not reference that, and finish removing some already badly auto-edited related text. Signed-off-by: NTom Rini <trini@konsulko.com>
-