- 13 1月, 2016 3 次提交
-
-
由 Simon Glass 提交于
Most driver model PCI functions have a dm_ prefix. At some point, when the old code is converted to driver model and the old functions are removed, we will drop that prefix. For consistency, we should use the dm_ prefix for all driver model functions. Update pci_bus_find_bdf() accordingly. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Simon Glass 提交于
Most driver model PCI functions have a dm_ prefix. At some point, when the old code is converted to driver model and the old functions are removed, we will drop that prefix. For consistency, we should use the dm_ prefix for all driver model functions. Update pci_get_bdf() accordingly. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Simon Glass 提交于
We don't want people changing the legacy PCI files while migration is in progress. Update the file headers to indicate that. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
- 12 1月, 2016 3 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
Due to a limitation removed in an earlier patch, USB tests were not seeing all the devices. Update the tests to pass now that all devices are visible. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Fabio Estevam 提交于
Update my email address to the NXP account. Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
-
- 10 1月, 2016 4 次提交
-
-
-
由 Otavio Salvador 提交于
'sf command' should receive the length in sector boundaries, so fix it accordingly. Also, show the steps to set the server and board IP addresses for making the steps clearer. Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br> Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>
-
由 Fabio Estevam 提交于
We currently support various versions of Solidrun mx6 boards, so remove the obsolete comment. Reported-by: NJon Nettleton <jon.nettleton@gmail.com> Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com> Reviewed-by: NStefano Babic <sbabic@denx.de>
-
由 Fabio Estevam 提交于
Since commit 59370f3f ("net: phy: delay only if reset handler is registered") Ethernet is no longer functional: Booting from net ... FEC Waiting for PHY auto negotiation to complete......... TIMEOUT ! BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 This commit does not have an issue in itself, but it revelead a problem with the Ethernet initialization. As per the AR8035 datasheet: "For a reliable power on reset, suggest to keep asserting the reset low long enough (10ms) to ensure the clock is stable and clock-to-reset 1ms requirement is satisfied." So do as suggested and keep the reset low for 10ms. Also add a 100us delay after deasserting the reset line to guarantee that the PHY ID can be read correctly and the Atheros PHY can be loaded as per Troy Kisky's suggestion. Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com> Tested-by: NTom Rini <trini@konsulko.com>
-
- 09 1月, 2016 1 次提交
-
-
- 08 1月, 2016 29 次提交
-
-
-
由 Bin Meng 提交于
When trying to access non-existent/unsupported PCI devices in ls_pcie_read_config(), when ls_pcie_addr_valid() fails it returns error code and fills in the result with 0xffffffff manually. But it really should return zero to upper layer codes. Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Bin Meng 提交于
When trying to access non-existent/unsupported PCI devices in imx_pcie_read_config(), when imx_pcie_addr_valid() fails it returns error code and fills in the result with 0xffffffff manually. But it really should return zero to upper layer codes. Reported-by: NFabio Estevam <fabio.estevam@nxp.com> Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Tested-by: NFabio Estevam <fabio.estevam@nxp.com>
-
由 David Müller (ELSOFT AG) 提交于
Signed-off-by: NDavid Müller <d.mueller@elsoft.ch>
-
由 Heiko Schocher 提交于
from linux commit ce8155f7a3d5: Perl 5.22 emits a deprecated message when "\C" is used in a regex. Perl 5.24 will disallow it altogether. Fix it by using [A-Z] instead of \C. >From linux adapted to U-Boot by: Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NAndre Przywara <andre.przywara@arm.com>
-
由 Rasmus Villemoes 提交于
Since 51209b1f ("Use common mtest iteration counting"), do_mem_mtest has always reported 0 errors and hence returned 0, even if errors were detected. Fix the helpers mem_test_alt() and mem_test_quick() to return the number of errors found. Signed-off-by: NRasmus Villemoes <rasmus.villemoes@prevas.dk>
-
由 Andy Fleming 提交于
If CONFIG_SYS_STDIO_DEREGISTER is not enabled, usb reset will fail every time. Enabling it allows usb reset to work. Signed-off-by: NAndy Fleming <afleming@gmail.com>
-
由 York Sun 提交于
Change from yorksun@freescale.com to york.sun@nxp.com. Signed-off-by: NYork Sun <york.sun@nxp.com>
-
由 Tom Rini 提交于
On these platforms we have many cases of boards that enable device model and GPIO support but do not enable OF_CONTROL and pass in a device tree with the binary. We need to bring in the platform data here as well. Tested on Beaglebone Black. Reported-by: NRobert Nelson <robertcnelson@gmail.com> Reported-by: NFrancisco Aguerre <franciscoaguerre@gmail.com> Reported-by: NJason Kridner <jkridner@beagleboard.org> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Michal Simek 提交于
Mark _debug_uart_init() as static to avoid sparse warning and inline it to debug_uart_init(). Reported-by: NThomas Chou <thomas@wytron.com.tw> Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Reviewed-by: NThomas Chou <thomas@wytron.com.tw> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Andre Przywara 提交于
In many parts of the computing world having a unique MAC address sitting in some on-NIC storage is considered the normal case. Remove the warning to not scare the user unnecessarily. This applies to Highbank/Midway and ARM's Juno, for instance. Besides that this fixes the formatting on Midway, for instance, which currently looks like: ... Net: xgmac0 Warning: xgmac0 using MAC address from net device , xgmac1 Warning: xgmac1 using MAC address from net device ... Signed-off-by: NAndre Przywara <andre.przywara@arm.com>
-
由 Andre Przywara 提交于
The default kernel load offset for an arm64 kernel is 0x80000, so U-Boot takes cares of moving the loaded kernel to a matching memory location just before booting it. Since we run with caches off, this takes a while for any decently sized kernel - with no output explaining the reason for the delay (unless one uses a DEBUG build). By adjusting the default load offset for Juno and VFP to be 512K aligned in the first place we can skip this copying and boot much faster. Tested on Juno. Signed-off-by: NAndre Przywara <andre.przywara@arm.com> Reviewed-by: NLinus Walleij <linus.walleij@linaro.org> Tested-by: NRyan Harkin <ryan.harkin@linaro.org>
-
由 Aneesh Bansal 提交于
The compilation of u-boot-dtb.img should be controlled by CONFIG_OF_CONTROL and not CONFIG_DM. CONFIG_DM may be defined even without Device Tree requirement. This was added in commit 947cee11. Signed-off-by: NRuchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: NAneesh Bansal <aneesh.bansal@freescale.com> CC: Alison Wang <alison.wang@freescale.com>
-
由 Robert P. J. Day 提交于
Correct mismatched comment on #endif to agree with its #if defined(). Also add some missing #endif comments for consistency, take out extraneous blank lines for readability. rday
-
由 Robert P. J. Day 提交于
First (small) pass at tidying up the README file, including: * remove references to obsolete CREDITS file * remove (some) references to obsolete boards.cfg file * remove at least one reference to a "scrapped" board * cut down unnecessarily detailed directory hierarchy * bunch of grammar and spelling tweaks Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
-
由 Robert P. J. Day 提交于
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
-
由 Robert P. J. Day 提交于
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca> Acked-by: NThomas Chou <thomas@wytron.com.tw>
-
-
由 Simon Glass 提交于
Various updates did not make it through to this board. Also the instructions for building a SPI image are no-longer correct. Fix these so that Jerry can boot to a prompt again. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
There is an unnecessary sector count displayed. Drop it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This feature was dropped at some point. Restore it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Joe Hershberger 提交于
Introduced in 45b47734 (net/arp: account for ARP delay, avoid duplicate packets on timeout) Check the arp timeout and adjust the timeout start time before the call to eth_recv() so that the sandbox driver has the opportunity to adjust the sandbox timer after the new start time has been recorded. Also, change the adjustment amount by 11 seconds instead of exactly the 10 seconds that the ping timout is expecting since the timeout check is looking for the time elapsed to be greater than but not equal to the specified delay. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> Reviewed-by: NStefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Przemyslaw Marczak 提交于
Commit: dm: core: Enable optional use of fdt_translate_address() Enables use of this function as default, but after this it's not possible to get dev address for the case in which: '#size-cells == 0' This causes errors when getting address for some GPIOs, for which the '#size-cells' is set to 0. Example error: '__of_translate_address: Bad cell count for gpx0' Allowing for that case by modifying the macro 'OF_CHECK_COUNTS', (called from )__of_translate_address(), fixes the issue. Now, this macro doesn't check, that '#size-cells' is greater than 0. This is possible from the specification point of view, but I'm not sure that it doesn't introduce a regression for other configs. Please test and share the results. Tested-on: Odroid U3, Odroid X2, Odroid XU3, Sandbox. Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de> Tested-by: NJaehoon Chung <jh80.chung@samsung.com> Tested-by: NLukasz Majewski <l.majewski@samsung.com>
-
由 Simon Glass 提交于
At present USB keyboards are not properly removed with driver model. Add the code to handle this. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NMarek Vasut <marex@denx.de>
-
-
由 Simon Glass 提交于
The current limit of 5 is not enough for the driver model USB tests. Really we should not have a limit but the driver model code still uses the usb_dev_desc[] array, which has a limit. Increasing the limit by 2 should not bother anyone. Adjust it. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NMarek Vasut <marex@denx.de>
-
由 Simon Glass 提交于
This subsystem has been broken since commit: 4efad20a sf: Update status reg check in spi_flash_cmd_wait_ready There has so far been no response from the maintainer, and a release is imminent. For now, let's just disable the tests. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
When 'ethrotate' variable is set to 'no' and 'ethact' variable is already set to an ethernet device, we should stick to 'ethact'. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Acked-by: NSimon Glass <sjg@chromium.org> Tested-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
In eth_current_changed(), the call to eth_get_dev() below has a side effect of rotating ethernet device if uc_priv->current == NULL. This is not what we want when 'ethrotate' variable is 'no'. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Acked-by: NSimon Glass <sjg@chromium.org> Tested-by: NSimon Glass <sjg@chromium.org>
-