Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: NPatrick Delaunay <patrick.delaunay73@gmail.com>

Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: NPatrick Delaunay <patrick.delaunay73@gmail.com>

This is not used in U-Boot, and the only usage calls a non-existent
function. Drop it.
Signed-off-by: NSimon Glass <sjg@chromium.org>

This is not used in U-Boot. Drop this option and associated dead code.
Signed-off-by: NSimon Glass <sjg@chromium.org>

This is not defined anywhere in U-Boot. Drop this dead code.
Signed-off-by: NSimon Glass <sjg@chromium.org>

This converts the following to Kconfig:
   CONFIG_ARCH_MISC_INIT
Signed-off-by: NSimon Glass <sjg@chromium.org>

This converts the following to Kconfig:
   CONFIG_ARCH_EARLY_INIT_R
Signed-off-by: NSimon Glass <sjg@chromium.org>

This is not defined by any board in U-Boot.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Move all of the status LED feature to drivers/led/Kconfig.
The LED status definitions were moved from the board configuration
files to the defconfig files.

TBD: Move all of the definitions in the include/status_led.h to the
relevant board's defconfig files.

Tested boards: CL-SOM-AM57x, CM-T335
Signed-off-by: NUri Mashiach <uri.mashiach@compulab.co.il>

Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
[York S: clean up scripts/config_whitelist.txt]
Reviewed-by: NYork Sun <york.sun@nxp.com>

Move symbol to Kconfig to cleanup configuration file.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Dropped becuase
- driver not used any board.
- no dm conversion.

Cc: Angelo Dureghello <angelo@sysam.it>
Cc: Richard Retanubun <richardretanubun@ruggedcom.com>
Signed-off-by: NJagan Teki <jagan@openedev.com>
Acked-by: NAngelo Dureghello <angelo@sysam.it>

There is no CONFIG_OF_PLATDATA, only CONFIG_SPL_OF_PLATDATA, so rename
the two references to CONFIG_OF_PLATDATA to CONFIG_SPL_OF_PLATDATA.
Signed-off-by: NTom Rini <trini@konsulko.com>

This re-syncs the MACH_TYPE_xxx values from the Linux Kernel v4.9
release.  In addition this removes all of the machine_arch_type and
machine_is_xxx logic that is unused in U-Boot.  This removal removes a
large number of otherwise unused CONFIG values from the list to be
converted.

Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NTom Rini <trini@konsulko.com>
Tested-by: NAdam Ford <aford173@gmail.com>

Dropped becuase
- driver and related configs not used any board.
- no dm conversion.

Cc: Heiko Schocher <hs@denx.de>
Cc: Sergey Kostanbaev <sergey.kostanbaev@gmail.com>
Signed-off-by: NJagan Teki <jagan@openedev.com>

Signed-off-by: NTom Rini <trini@konsulko.com>

Use Kconfig option SYS_PPC64 instead.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Use Kconfig option to select chassis version.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Use Kconfig option E6500 and clean up existing usage.
Signed-off-by: NYork Sun <york.sun@nxp.com>

These two macros are used for the same thing, the total number of DDR
controllers for a given SoC. Use SYS_NUM_DDR_CTRLS in Kconfig and
merge existing usage.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Use option NUM_DDR_CONTROLLERS in ddr Kconfig and clean up existing
usage in ls102xa and fsl-layerscape. Remove all powerpc macros in
config header and board header files.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Use Kconfig to select errata workaround.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Add option SYS_FSL_ERRATUM_ESDHC111, SYS_FSL_ERRATUM_ESDHC13,
SYS_FSL_ERRATUM_ESDHC135, SYS_FSL_ERRATUM_ESDHC_A001 to mmc Kconfig.
Move existing macros to related Kconfig.
Signed-off-by: NYork Sun <york.sun@nxp.com>
[trini: Migrate bk4r1]
Signed-off-by: NTom Rini <trini@konsulko.com>

Create driver/ddr/fsl/Kconfig and move existing options. Clean up
existing macros.
Signed-off-by: NYork Sun <york.sun@nxp.com>
[trini: Migrate sbc8641d, xpedite537x and MPC8536DS, run a moveconfig.py -s]
Signed-off-by: NTom Rini <trini@konsulko.com>

Use TARGET_T2081QDS from Kconfig instead.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Use TARGET_T2080RDB from Kconfig instead.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Use TARGET_T2080QDS from Kconfig instead.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Use TARGET_T1040QDS from Kconfig instead.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Use TARGET_T1024RDB from Kconfig instead.
Signed-off-by: NYork Sun <york.sun@nxp.com>
[trini: Get missing hunk in board/freescale/t102xrdb/ddr.c]
Signed-off-by: NTom Rini <trini@konsulko.com>

Use TARGET_T1023RDB from Kconfig instead.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Use Kconfig option to set little- or big-endian access to secure
boot and trust architecture.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Instead of define CONFIG_SYS_FSL_SEC_COMPAT in header files for PowerPC
and ARM SoCs, move it to Kconfig under the driver.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Use Kconfig SYS_PPC_E500_DEBUG_TLB and clean up existing macros.
Signed-off-by: NYork Sun <york.sun@nxp.com>
[trini: Migrate 8572]
Signed-off-by: NTom Rini <trini@konsulko.com>

Use Kconfig option for E500 and E500MC macros.
Signed-off-by: NYork Sun <york.sun@nxp.com>

armada100_spi.c and related env is zapping becuase
of "no DM conversion".

Cc: Ajay Bhargav <ajay.bhargav@einfochips.com>
Signed-off-by: NJagan Teki <jagan@openedev.com>

armada100_spi.c, related config options and related codes
are zapping becuase of "no DM conversion".

Cc: Werner Pfister <Pfister_Werner@intercontrol.de>
Signed-off-by: NJagan Teki <jagan@openedev.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

This is not used by any boards. Drop it.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Acked-by: NDavid Müller <d.mueller@elsoft.ch>
Reviewed-by: NJagan Teki <jagan@openedev.com>

This board has not been converted to DM_SERIAL by the deadline.
Remove it.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Acked-by: NDavid Müller <d.mueller@elsoft.ch>
Reviewed-by: NJagan Teki <jagan@openedev.com>

This board has not been converted to DM_SERIAL by the deadline.
Remove it.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Acked-by: NDavid Müller <d.mueller@elsoft.ch>

Use Kconfig instead of defining this macro in header file.
Signed-off-by: NYork Sun <york.sun@nxp.com>