Convert CONFIG_ARCH_EARLY_INIT_R to Kconfig

This converts the following to Kconfig: CONFIG_ARCH_EARLY_INIT_R Signed-off-by: N Simon Glass <sjg@chromium.org>

Convert CONFIG_ARCH_EARLY_INIT_R to Kconfig
This converts the following to Kconfig: CONFIG_ARCH_EARLY_INIT_R Signed-off-by: N Simon Glass <sjg@chromium.org>
a421192f · Simon Glass · Tom Rini · d02f5ea3 · a421192f · a421192f
34 changed file
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -12,6 +12,7 @@ config ARC
 	bool "ARC architecture"
 	select HAVE_PRIVATE_LIBGCC
 	select SUPPORT_OF_CONTROL
+	select ARCH_EARLY_INIT_R

 config ARM
 	bool "ARM architecture"

--- a/arch/arc/include/asm/config.h
+++ b/arch/arc/include/asm/config.h
@@ -8,7 +8,6 @@
 #define __ASM_ARC_CONFIG_H_

 #define CONFIG_SYS_BOOT_RAMDISK_HIGH
-#define CONFIG_ARCH_EARLY_INIT_R

 #define CONFIG_LMB


--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -607,6 +607,7 @@ config ARCH_SOCFPGA
 	select DM_SPI_FLASH
 	select DM_SPI
 	select ENABLE_ARM_SOC_BOOT0_HOOK
+	select ARCH_EARLY_INIT_R

 config TARGET_CM_T43
 	bool "Support cm_t43"

--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -5,6 +5,7 @@ config ARCH_LS1012A
 	select SYS_FSL_DDR_BE
 	select SYS_FSL_MMDC
 	select SYS_FSL_ERRATUM_A010315
+	select ARCH_EARLY_INIT_R

 config ARCH_LS1043A
 	bool
@@ -22,6 +23,7 @@ config ARCH_LS1043A
 	select SYS_FSL_ERRATUM_A010539
 	select SYS_FSL_HAS_DDR3
 	select SYS_FSL_HAS_DDR4
+	select ARCH_EARLY_INIT_R

 config ARCH_LS1046A
 	bool
@@ -38,6 +40,7 @@ config ARCH_LS1046A
 	select SYS_FSL_ERRATUM_A010539
 	select SYS_FSL_HAS_DDR4
 	select SYS_FSL_SRDS_2
+	select ARCH_EARLY_INIT_R

 config ARCH_LS2080A
 	bool
@@ -62,6 +65,7 @@ config ARCH_LS2080A
 	select SYS_FSL_ERRATUM_A009803
 	select SYS_FSL_ERRATUM_A009942
 	select SYS_FSL_ERRATUM_A010165
+	select ARCH_EARLY_INIT_R

 config FSL_LSCH2
 	bool

--- a/common/Kconfig
+++ b/common/Kconfig
@@ -399,4 +399,17 @@ config DISPLAY_BOARDINFO
 	  when U-Boot starts up. The board function checkboard() is called
 	  to do this.

+menu "Start-up hooks"
+
+config ARCH_EARLY_INIT_R
+	bool "Call arch-specific init soon after relocation"
+	default y if X86
+	help
+	  With this option U-Boot will call arch_early_init_r() soon after
+	  relocation. Driver model is running by this point, and the cache
+	  is on. Note that board_early_init_r() is called first, if
+	  enabled. This can be used to set up architecture-specific devices.
+
+endmenu
+
 source "common/spl/Kconfig"
--- a/configs/bayleybay_defconfig
+++ b/configs/bayleybay_defconfig
@@ -17,6 +17,7 @@ CONFIG_FIT=y
 CONFIG_BOOTSTAGE=y
 CONFIG_BOOTSTAGE_REPORT=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
+# CONFIG_ARCH_EARLY_INIT_R is not set
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_CPU=y
 # CONFIG_CMD_IMLS is not set

--- a/configs/cougarcanyon2_defconfig
+++ b/configs/cougarcanyon2_defconfig
@@ -4,6 +4,7 @@ CONFIG_DEFAULT_DEVICE_TREE="cougarcanyon2"
 CONFIG_TARGET_COUGARCANYON2=y
 CONFIG_CONSOLE_MUX=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
+# CONFIG_ARCH_EARLY_INIT_R is not set
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

--- a/configs/dfi-bt700-q7x-151_defconfig
+++ b/configs/dfi-bt700-q7x-151_defconfig
@@ -16,6 +16,7 @@ CONFIG_FIT_SIGNATURE=y
 CONFIG_BOOTSTAGE=y
 CONFIG_BOOTSTAGE_REPORT=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
+# CONFIG_ARCH_EARLY_INIT_R is not set
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_CPU=y
 # CONFIG_CMD_IMLS is not set

--- a/configs/efi-x86_defconfig
+++ b/configs/efi-x86_defconfig
@@ -5,6 +5,7 @@ CONFIG_TARGET_EFI=y
 CONFIG_FIT=y
 CONFIG_CONSOLE_MUX=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
+# CONFIG_ARCH_EARLY_INIT_R is not set
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_BOOTM is not set
 # CONFIG_CMD_IMLS is not set

--- a/configs/minnowmax_defconfig
+++ b/configs/minnowmax_defconfig
@@ -17,6 +17,7 @@ CONFIG_FIT_SIGNATURE=y
 CONFIG_BOOTSTAGE=y
 CONFIG_BOOTSTAGE_REPORT=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_ARCH_EARLY_INIT_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_CPU=y
 # CONFIG_CMD_IMLS is not set

--- a/configs/mvebu_db-88f3720_defconfig
+++ b/configs/mvebu_db-88f3720_defconfig
@@ -9,6 +9,7 @@ CONFIG_AHCI=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 # CONFIG_DISPLAY_CPUINFO is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_EARLY_INIT_R=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_SF=y

--- a/configs/mvebu_db-88f7040_defconfig
+++ b/configs/mvebu_db-88f7040_defconfig
@@ -9,6 +9,7 @@ CONFIG_AHCI=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 # CONFIG_DISPLAY_CPUINFO is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_EARLY_INIT_R=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

--- a/configs/mvebu_db-88f8040_defconfig
+++ b/configs/mvebu_db-88f8040_defconfig
@@ -9,6 +9,7 @@ CONFIG_AHCI=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 # CONFIG_DISPLAY_CPUINFO is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_EARLY_INIT_R=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

--- a/configs/qemu-x86_efi_payload32_defconfig
+++ b/configs/qemu-x86_efi_payload32_defconfig
@@ -6,6 +6,7 @@ CONFIG_FIT=y
 CONFIG_BOOTSTAGE=y
 CONFIG_BOOTSTAGE_REPORT=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_ARCH_EARLY_INIT_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_CPU=y
 # CONFIG_CMD_IMLS is not set

--- a/configs/qemu-x86_efi_payload64_defconfig
+++ b/configs/qemu-x86_efi_payload64_defconfig
@@ -6,6 +6,7 @@ CONFIG_FIT=y
 CONFIG_BOOTSTAGE=y
 CONFIG_BOOTSTAGE_REPORT=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_ARCH_EARLY_INIT_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_CPU=y
 # CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set

--- a/configs/rut_defconfig
+++ b/configs/rut_defconfig
@@ -22,6 +22,7 @@ CONFIG_BOOTDELAY=3
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 # CONFIG_DISPLAY_CPUINFO is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_EARLY_INIT_R=y
 CONFIG_SPL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300

--- a/configs/theadorable-x86-dfi-bt700_defconfig
+++ b/configs/theadorable-x86-dfi-bt700_defconfig
@@ -16,6 +16,7 @@ CONFIG_FIT_SIGNATURE=y
 CONFIG_BOOTSTAGE=y
 CONFIG_BOOTSTAGE_REPORT=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
+# CONFIG_ARCH_EARLY_INIT_R is not set
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_CPU=y
 # CONFIG_CMD_IMLS is not set

--- a/include/configs/conga-qeval20-qa3-e3845.h
+++ b/include/configs/conga-qeval20-qa3-e3845.h
@@ -15,7 +15,6 @@

 #define CONFIG_SYS_MONITOR_LEN		(1 << 20)
 #define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_ARCH_EARLY_INIT_R
 #define CONFIG_ARCH_MISC_INIT

 #define CONFIG_STD_DEVICES_SETTINGS     "stdin=serial\0" \

--- a/include/configs/crownbay.h
+++ b/include/configs/crownbay.h
@@ -15,7 +15,6 @@

 #define CONFIG_SYS_MONITOR_LEN		(1 << 20)
 #define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_ARCH_EARLY_INIT_R

 #define CONFIG_SMSC_LPC47M


--- a/include/configs/galileo.h
+++ b/include/configs/galileo.h
@@ -15,7 +15,6 @@

 #define CONFIG_SYS_MONITOR_LEN		(1 << 20)
 #define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_ARCH_EARLY_INIT_R
 #define CONFIG_ARCH_MISC_INIT

 /* ns16550 UART is memory-mapped in Quark SoC */

--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -89,8 +89,6 @@
 #define CONFIG_CMD_ENV
 #undef CONFIG_CMD_IMLS

-#define CONFIG_ARCH_EARLY_INIT_R
-
 #define CONFIG_SYS_HZ			1000

 #define CONFIG_HWCONFIG

--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -185,7 +185,6 @@

 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
-#define CONFIG_ARCH_EARLY_INIT_R

 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		128

--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -158,7 +158,6 @@

 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
-#define CONFIG_ARCH_EARLY_INIT_R

 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		128

--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -175,7 +175,6 @@ unsigned long long get_qixis_addr(void);

 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
-#define CONFIG_ARCH_EARLY_INIT_R

 /* Physical Memory Map */
 /* fixme: these need to be checked against the board */

--- a/include/configs/minnowmax.h
+++ b/include/configs/minnowmax.h
@@ -14,7 +14,6 @@
 #include <configs/x86-common.h>

 #define CONFIG_SYS_MONITOR_LEN		(1 << 20)
-#define CONFIG_ARCH_EARLY_INIT_R
 #define CONFIG_ARCH_MISC_INIT

 #define CONFIG_SMSC_LPC47M

--- a/include/configs/mvebu_armada-8k.h
+++ b/include/configs/mvebu_armada-8k.h
@@ -13,7 +13,6 @@
 #define CONFIG_SYS_TCLK		250000000	/* 250MHz */

 #define CONFIG_DISPLAY_BOARDINFO_LATE
-#define CONFIG_ARCH_EARLY_INIT_R

 #define	CONFIG_SYS_TEXT_BASE	0x00000000


--- a/include/configs/mvebu_db-88f3720.h
+++ b/include/configs/mvebu_db-88f3720.h
@@ -11,7 +11,6 @@
 * High Level Configuration Options (easy to change)
 */
 #define CONFIG_DISPLAY_BOARDINFO_LATE
-#define CONFIG_ARCH_EARLY_INIT_R

 #define	CONFIG_SYS_TEXT_BASE	0x00000000


--- a/include/configs/qemu-x86.h
+++ b/include/configs/qemu-x86.h
@@ -14,7 +14,6 @@
 #include <configs/x86-common.h>

 #define CONFIG_SYS_MONITOR_LEN		(1 << 20)
-#define CONFIG_ARCH_EARLY_INIT_R

 #define CONFIG_STD_DEVICES_SETTINGS	"stdin=serial,i8042-kbd\0" \
 					"stdout=serial,vidconsole\0" \

--- a/include/configs/rut.h
+++ b/include/configs/rut.h
@@ -130,7 +130,6 @@
 #define CONFIG_OMAP3_SPI

 #define BOARD_LCD_RESET		115	/* Bank 3 pin 19 */
-#define CONFIG_ARCH_EARLY_INIT_R
 #define CONFIG_FORMIKE
 #define DISPL_PLL_SPREAD_SPECTRUM
 #endif

--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -16,7 +16,6 @@
 */
 #define CONFIG_DISPLAY_BOARDINFO_LATE
 #define CONFIG_ARCH_MISC_INIT
-#define CONFIG_ARCH_EARLY_INIT_R
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_CLOCKS


--- a/include/configs/som-6896.h
+++ b/include/configs/som-6896.h
@@ -23,8 +23,6 @@
 #define VIDEO_IO_OFFSET			0
 #define CONFIG_X86EMU_RAW_IO

-#define CONFIG_ARCH_EARLY_INIT_R
-
 #define CONFIG_STD_DEVICES_SETTINGS	"stdin=serial,usbkbd\0" \
 					"stdout=serial,vidconsole\0" \
 					"stderr=serial,vidconsole\0"

--- a/include/configs/som-db5800-som-6867.h
+++ b/include/configs/som-db5800-som-6867.h
@@ -15,7 +15,6 @@

 #define CONFIG_SYS_MONITOR_LEN		(1 << 20)
 #define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_ARCH_EARLY_INIT_R
 #define CONFIG_ARCH_MISC_INIT

 #define CONFIG_STD_DEVICES_SETTINGS	"stdin=serial,usbkbd\0" \

--- a/include/configs/x86-chromebook.h
+++ b/include/configs/x86-chromebook.h
@@ -40,8 +40,6 @@
 #define VIDEO_IO_OFFSET				0
 #define CONFIG_X86EMU_RAW_IO

-#define CONFIG_ARCH_EARLY_INIT_R
-
 #undef CONFIG_ENV_IS_NOWHERE
 #undef CONFIG_ENV_SIZE
 #define CONFIG_ENV_SIZE			0x1000

--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -109,7 +109,6 @@ CONFIG_AP_SH4A_4A
 CONFIG_ARCH_ADPAG101P
 CONFIG_ARCH_CPU_INIT
 CONFIG_ARCH_CSB226
-CONFIG_ARCH_EARLY_INIT_R
 CONFIG_ARCH_HAS_ILOG2_U32
 CONFIG_ARCH_HAS_ILOG2_U64
 CONFIG_ARCH_INNOKOM