- 01 4月, 2016 6 次提交
-
-
由 Alexander Graf 提交于
Some of the code in arch/arm/cpu/armv7/sunxi is actually armv7 specific, while most of it is just generic code that could as well be used on an AArch64 SoC. Move all files that are not really tied to armv7 into a new mach-sunxi directory. Signed-off-by: NAlexander Graf <agraf@suse.de> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Chen-Yu Tsai 提交于
This provides the minimal changes to the H8Homlet v2 dts to enable USB in U-boot. It is not what will be submitted to the kernel. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Chen-Yu Tsai 提交于
This provides the minimal changes to the Cubietruck Plus dts to enable USB in U-boot. It is not what will be submitted to the kernel. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Chen-Yu Tsai 提交于
This provides the minimal changes to the A83T dtsi to enable USB in U-boot. It is not what will be submitted to the kernel. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Chen-Yu Tsai 提交于
The Cubietruck Plus uses all 3 USB controllers: - USB OTG functions are provided by the musb USB OTG controller - Onboard SATA is provied by a USB-SATA bridge connected to USB1 - The USB host ports on the board are provided by an HSIC USB hub FLDO1 is set to 1.2V for HSIC. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Chen-Yu Tsai 提交于
The h8_homlet_v2 has 2 USB host ports, one connected to the OTG controller, one connected to the EHCI/OHCI pair. Also provide the card detect pin for MMC. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
- 31 3月, 2016 18 次提交
-
-
由 Chen-Yu Tsai 提交于
We have a separate compatible for almost each SoC. Add one for the A83T. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Chen-Yu Tsai 提交于
We have a separate compatible for almost each SoC. Add one for the A83T. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Chen-Yu Tsai 提交于
The A83T has 3 PHYs, the last one being HSIC, which has 2 clocks. Also there is only 1 OHCI. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Chen-Yu Tsai 提交于
The A83T has 3 USB PHYs: 1 for USB OTG, 1 for standard USB 1.1/2.0 host, 1 for USB HSIC. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Chen-Yu Tsai 提交于
DLDO4 supplies power to the PD pins, and the AC200 Ethernet PHY / composite video encoder. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Chen-Yu Tsai 提交于
The schematics of the h8_homlet_v2 show DCDC1 set to 3.3V. Some Allwinner-based boards set it to 3.0V to conserve power. Since the h8_homlet_v2 is a set-top box board with external power, there is no such requirement. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Chen-Yu Tsai 提交于
The FLDOs on AXP818 PMIC normally provide power to CPUS and USB HSIC PHY on the A83T/H8. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Chen-Yu Tsai 提交于
DCDC5 is designed to supply VCC-DRAM, which is normally 1.5V for DDR3, 1.35V for DDR3L, and 1.2V for LPDDR3. Also remove CONFIG_AXP_DCDC5_VOLT from h8_homlet_v2_defconfig. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Chen-Yu Tsai 提交于
AXP818 supports VBUS drive function, even though the manual does not mention it. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Chen-Yu Tsai 提交于
VBUS drive is supported on AXP221 and later PMICs. Rework the macros so we can support this on later PMICs without too much work. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Chen-Yu Tsai 提交于
Like the Allwinner A33 SoC, the A83T is missing the config register from the musb USB DRD hardware block. Use a known working value for it. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Chen-Yu Tsai 提交于
axp818_init() is declared, but never defined. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Hans de Goede 提交于
LDO3 and LDO4 are used to power port E resp. port G, which are exposed on gpio headers, so enable them at 2.8V as specified in the schematic. Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Michael Haas 提交于
Force master mode on the A20-OLinuXino-Lime2. This change is required to get a reliable link at gigabit speeds. Signed-off-by: NMichael Haas <haas@computerlinguist.org> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Michael Haas 提交于
Force master mode for 1000BASE-T operation on the A20-Olimex-SOM-EVB. Karsten Merker reports that this change is necessary to get a reliable link at gigabit speeds. Signed-off-by: NMichael Haas <haas@computerlinguist.org> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Michael Haas 提交于
This patch introduces CONFIG_RTL8211X_PHY_FORCE_MASTER. If this define is set, RTL8211x PHYs (except for the RTL8211F) will have their 1000BASE-T master/slave autonegotiation disabled and forced to master mode. This is helpful for PHYs like the RTL8211C which produce unstable links in slave mode. Such problems have been found on the A20-Olimex-SOM-EVB and A20-OLinuXino-Lime2. There is no proper way to identify affected PHYs in software as the RTL8211C shares its UID with the RTL8211B. Thus, this fix requires the introduction of an #ifdef. CC: fradav@gmail.com CC: merker@debian.org CC: hdegoede@redhat.com CC: ijc@hellion.org.uk CC: joe.hershberger@ni.com Signed-off-by: NMichael Haas <haas@computerlinguist.org> Tested-by: NKarsten Merker <merker@debian.org> Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Hans de Goede 提交于
As the need for various magic sram pokes has shown this maybe useful info to have. e.g. this shows one of my a23 tablets having an id of 1661 rather then the usual 1650 for the a23. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
由 Hans de Goede 提交于
I noticed that for certain SoC versions boot0 does a magic poke when build for A33. I'm not aware of this actually being necessary anywhere, but better safe then sorry. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
- 30 3月, 2016 3 次提交
-
-
-
-
由 Stephen Warren 提交于
This bit needs to be set for system suspend/resume to work. This setting will be documented in an updated TRM at some time in the future. Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
- 29 3月, 2016 13 次提交
-
-
由 Rai Harninder 提交于
This patch enable VID support for ls2080ardb platform. It uses the common VID driver. Signed-off-by: NRai Harninder <harninder.rai@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Qianyu Gong 提交于
Clock phase and polarity for DSPI flash need to be set. Signed-off-by: NGong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Mingkai Hu 提交于
Signed-off-by: NMingkai Hu <mingkai.hu@nxp.com> Signed-off-by: NGong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Mingkai Hu 提交于
Signed-off-by: NMingkai Hu <mingkai.hu@nxp.com> Signed-off-by: NGong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Saksham Jain 提交于
Use a pointer to pass image address to fsl_secboot_validate(), instead of using environmental variable "img_addr". Signed-off-by: NAneesh Bansal <aneesh.bansal@nxp.com> Signed-off-by: NSaksham Jain <saksham.jain@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Saksham Jain 提交于
In case of fatal failure during secure boot execution (e.g. header not found), reset is asserted to stop execution. If the RESET_REQ is not tied to HRESET, this allows the execution to continue. Add esbh_halt() after the reset to make sure execution stops. Signed-off-by: NAneesh Bansal <aneesh.bansal@nxp.com> Signed-off-by: NSaksham Jain <saksham.jain@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Saksham Jain 提交于
For secure boot, currently we were using fixed bootargs for all SoCs. This is not needed and we can use the bootargs which are used in non-secure boot. Signed-off-by: NAneesh Bansal <aneesh.bansal@nxp.com> Signed-off-by: NSaksham Jain <saksham.jain@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Saksham Jain 提交于
This commit solves CAAM coherency issue on ls2080. When caches are enabled and CAAM's DMA's AXI transcations are not made cacheable, Core reads/writes data from/to caches and CAAM does from main memory. This forces data flushes to synchronize various data structures. But even if any data in proximity of these structures is read by core, these structures again are fetched in caches. To avoid this problem, either all the data that CAAM accesses can be made cache line aligned or CAAM transcations can be made cacheable. So, this commit makes CAAM transcations as write back with write and read allocate. Signed-off-by: NSaksham Jain <saksham.jain@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Saksham Jain 提交于
When MMU is disabled, 64-bit write must be aligned at 64-bit boundary. Becaue the memory location is not guaranteed to be 64-bit aligned, the 64-bit write needs to be split into two 32-bit writes to avoid the alignment exception. Signed-off-by: NAneesh Bansal <aneesh.bansal@nxp.com> Signed-off-by: NSaksham Jain <saksham.jain@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Saksham Jain 提交于
During secure boot, SMMU is enabled on POR by SP bootrom. SMMU needs to be put in bypass mode in uboot to enable CAAM transcations to pass through. For non-secure boot, SP BootROM doesn't enable SMMU, which is in bypass mode out of reset. Signed-off-by: NAneesh Bansal <aneesh.bansal@nxp.com> Signed-off-by: NSaksham Jain <saksham.jain@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Saksham Jain 提交于
The GUR (DCFG) registers in CCSR space are in little endian format. Define a config CONFIG_SYS_FSL_CCSR_GUR_LE in arch/arm/include/asm/arch-fsl-layerscape/config.h Signed-off-by: NAneesh Bansal <aneesh.bansal@nxp.com> Signed-off-by: NSaksham Jain <saksham.jain@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Saksham Jain 提交于
"fdt_high" env variable was set to 0xcfffffff for secure boot. Change it to 0xa0000000 for LS2080 to be consistent with non-secure boot targets. Signed-off-by: NAneesh Bansal <aneesh.bansal@nxp.com> Signed-off-by: NSaksham Jain <saksham.jain@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Saksham Jain 提交于
To unify steps for secure boot for xip (eg. NOR) and non-xip memories (eg. NAND, SD), bootscipts and its header are copied to main memory. Validation and execution are performed from there. For other ARM Platforms (ls1043 and ls1020), to avoid disruption of existing users, this copy step is not used for NOR boot. Signed-off-by: NAneesh Bansal <aneesh.bansal@nxp.com> Signed-off-by: NSaksham Jain <saksham.jain@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-