sunxi: Move cpu independent code to mach directory

Some of the code in arch/arm/cpu/armv7/sunxi is actually armv7 specific, while
most of it is just generic code that could as well be used on an AArch64 SoC.

Move all files that are not really tied to armv7 into a new mach-sunxi
directory.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>

arch/arm/Makefile

@@ -54,6 +54,7 @@ machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
 # TODO: rename CONFIG_ORION5X -> CONFIG_ARCH_ORION5X
 machine-$(CONFIG_ORION5X)		+= orion5x
 machine-$(CONFIG_ARCH_S5PC1XX)		+= s5pc1xx
+machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
 machine-$(CONFIG_ARCH_SOCFPGA)		+= socfpga
 machine-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip
 machine-$(CONFIG_STM32)			+= stm32

arch/arm/cpu/armv7/sunxi/Makefile

@@ -8,38 +8,10 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 obj-y	+= timer.o
-obj-y	+= board.o
-obj-y	+= clock.o
-obj-y	+= cpu_info.o
-obj-y	+= dram_helpers.o
-obj-y	+= pinmux.o
-ifndef CONFIG_MACH_SUN9I
-obj-y	+= usb_phy.o
-endif
-obj-$(CONFIG_MACH_SUN6I)	+= prcm.o
-obj-$(CONFIG_MACH_SUN8I)	+= prcm.o
-obj-$(CONFIG_MACH_SUN9I)	+= prcm.o
-obj-$(CONFIG_MACH_SUN6I)	+= p2wi.o
-obj-$(CONFIG_MACH_SUN8I)	+= rsb.o
-obj-$(CONFIG_MACH_SUN9I)	+= rsb.o
-obj-$(CONFIG_MACH_SUN4I)	+= clock_sun4i.o
-obj-$(CONFIG_MACH_SUN5I)	+= clock_sun4i.o
-obj-$(CONFIG_MACH_SUN6I)	+= clock_sun6i.o
-obj-$(CONFIG_MACH_SUN7I)	+= clock_sun4i.o
-ifdef CONFIG_MACH_SUN8I_A83T
-obj-y				+= clock_sun8i_a83t.o
-else
-obj-$(CONFIG_MACH_SUN8I)	+= clock_sun6i.o
-endif
-obj-$(CONFIG_MACH_SUN9I)	+= clock_sun9i.o
+
 obj-$(CONFIG_MACH_SUN6I)	+= tzpc.o
 obj-$(CONFIG_MACH_SUN8I_H3)	+= tzpc.o
 
-obj-$(CONFIG_AXP152_POWER)	+= pmic_bus.o
-obj-$(CONFIG_AXP209_POWER)	+= pmic_bus.o
-obj-$(CONFIG_AXP221_POWER)	+= pmic_bus.o
-obj-$(CONFIG_AXP818_POWER)	+= pmic_bus.o
-
 ifndef CONFIG_SPL_BUILD
 ifdef CONFIG_ARMV7_PSCI
 obj-$(CONFIG_MACH_SUN6I)	+= psci_sun6i.o
@@ -49,13 +21,5 @@ endif
 endif
 
 ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_MACH_SUN4I)	+= dram_sun4i.o
-obj-$(CONFIG_MACH_SUN5I)	+= dram_sun4i.o
-obj-$(CONFIG_MACH_SUN6I)	+= dram_sun6i.o
-obj-$(CONFIG_MACH_SUN7I)	+= dram_sun4i.o
-obj-$(CONFIG_MACH_SUN8I_A23)	+= dram_sun8i_a23.o
-obj-$(CONFIG_MACH_SUN8I_A33)	+= dram_sun8i_a33.o
-obj-$(CONFIG_MACH_SUN8I_A83T)	+= dram_sun8i_a83t.o
-obj-$(CONFIG_MACH_SUN8I_H3)	+= dram_sun8i_h3.o
 obj-y	+= fel_utils.o
 endif

arch/arm/mach-sunxi/Makefile

+#
+# (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
+#
+# Based on some other Makefile
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	+= board.o
+obj-y	+= clock.o
+obj-y	+= cpu_info.o
+obj-y	+= dram_helpers.o
+obj-y	+= pinmux.o
+ifndef CONFIG_MACH_SUN9I
+obj-y	+= usb_phy.o
+endif
+obj-$(CONFIG_MACH_SUN6I)	+= prcm.o
+obj-$(CONFIG_MACH_SUN8I)	+= prcm.o
+obj-$(CONFIG_MACH_SUN9I)	+= prcm.o
+obj-$(CONFIG_MACH_SUN6I)	+= p2wi.o
+obj-$(CONFIG_MACH_SUN8I)	+= rsb.o
+obj-$(CONFIG_MACH_SUN9I)	+= rsb.o
+obj-$(CONFIG_MACH_SUN4I)	+= clock_sun4i.o
+obj-$(CONFIG_MACH_SUN5I)	+= clock_sun4i.o
+obj-$(CONFIG_MACH_SUN6I)	+= clock_sun6i.o
+obj-$(CONFIG_MACH_SUN7I)	+= clock_sun4i.o
+ifdef CONFIG_MACH_SUN8I_A83T
+obj-y				+= clock_sun8i_a83t.o
+else
+obj-$(CONFIG_MACH_SUN8I)	+= clock_sun6i.o
+endif
+obj-$(CONFIG_MACH_SUN9I)	+= clock_sun9i.o
+
+obj-$(CONFIG_AXP152_POWER)	+= pmic_bus.o
+obj-$(CONFIG_AXP209_POWER)	+= pmic_bus.o
+obj-$(CONFIG_AXP221_POWER)	+= pmic_bus.o
+obj-$(CONFIG_AXP818_POWER)	+= pmic_bus.o
+
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_MACH_SUN4I)	+= dram_sun4i.o
+obj-$(CONFIG_MACH_SUN5I)	+= dram_sun4i.o
+obj-$(CONFIG_MACH_SUN6I)	+= dram_sun6i.o
+obj-$(CONFIG_MACH_SUN7I)	+= dram_sun4i.o
+obj-$(CONFIG_MACH_SUN8I_A23)	+= dram_sun8i_a23.o
+obj-$(CONFIG_MACH_SUN8I_A33)	+= dram_sun8i_a33.o
+obj-$(CONFIG_MACH_SUN8I_A83T)	+= dram_sun8i_a83t.o
+obj-$(CONFIG_MACH_SUN8I_H3)	+= dram_sun8i_h3.o
+endif