Define the MAX_CLUSTSIZE to default of 65536 only if
CONFIG_FS_FAT_MAX_CLUSTSIZE is not defined.
This option has been provided to save memory in some
memory constrained cases.
Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com>
Acked-by: NMichal Simek <monstr@monstr.eu>

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC8xx family is old enough, nobody would pick up
the maintainership on it.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>

The quad100hd has been unmaintained and dead ever since it's been
added some 6 years ago.  Remove it.

Also update README.scrapyard and insert some commit IDs for removed
boards.
Signed-off-by: NWolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Gary Jennejohn <gljennjohn@googlemail.com>

bootdelay_process() never returns in some circumstances, whichs makes the
control flow confusing. Change it so that the decision about how to execute
the boot command is made in the main_loop() code, so it is easier to follow.
Move CLI stuff to cli.c.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Move these details from main (which doesn't care which parser is used) to
cli.c where they belong.
Signed-off-by: NSimon Glass <sjg@chromium.org>

This code seems unnecessarily complex. We really just need to check the
global_data. Now that is it all in one place, and not arch-specific, this
is pretty easy.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Add a bootretry_ prefix to these two functions, and remove the need for
the #ifdef around everything (it moves to the Makefile).
Signed-off-by: NSimon Glass <sjg@chromium.org>

This code is only used by one board, so it seems a shame to clutter up
the readline code with it. Move it into its own file.
Signed-off-by: NSimon Glass <sjg@chromium.org>

The autoboot code is complex and long. It deserves its own file with
a simple interface from main.c.
Signed-off-by: NSimon Glass <sjg@chromium.org>

This makes it clear where the code resides.
Signed-off-by: NSimon Glass <sjg@chromium.org>

It doesn't make sense to have the simple parser and the readline code
all in main. Split them out into separate files.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Move the CLI prototypes from common.h to cli.h as part of an effort to
reduce the size of common.h.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Hush is a command-line interpreter, so rename it to make that clearer.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Development board for headless gateway platform from Abilis Systems.
Initial commit with working UART and DW GMAC.

For now with generic Ethernet PHY due to problems in Realtek PHY driver.
Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>

Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Christian Ruppert <christian.ruppert@abilis.com>
Cc: Pierrick Hascoet <pierrick.hascoet@abilis.com>

using UBI and DM together leads in compiler error, as
both define a "struct device", so rename "struct device"
in include/dm/device.h to "struct udevice", as we use
linux code (MTD/UBI/UBIFS some USB code,...) and cannot
change the linux "struct device"
Signed-off-by: NHeiko Schocher <hs@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Marek Vasut <marex@denx.de>

In this configuration the environment will save in file: uboot.env of
mmc card.
Signed-off-by: NJosh Wu <josh.wu@atmel.com>
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>

Also we enable the mmc command in configuration file.

As both CONFIG_CMD_MMC and CONFIG_CMD_USB use the CONFIG_DOS_PARTITION,
so remove the redundant CONFIG_DOS_PARTITION definition.
Signed-off-by: NJosh Wu <josh.wu@atmel.com>
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>

As at91 board config file will include the SoC header, so we can remove
the ARM926EJS definition in board config files.
Signed-off-by: NJosh Wu <josh.wu@atmel.com>
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>

Now the AT91FAMILY is already defined in the at91 SoC header. The at91
board config file will include the SoC header file.

So we can remove the redundant AT91FAMILY definition in at91 board
config files.
Signed-off-by: NJosh Wu <josh.wu@atmel.com>
[rebase patch]
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>

Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
Cc: Bo Shen <voice.shen@atmel.com>
Tested-by: NBo Shen <voice.shen@atmel.com>

The new atmelimage converts a machine code BLOB to bootable ROM image. Atmel
ROM has no sophisticated image format, it only checks the first 7 ARM vectors.
The vectors can contain valid B or LDR opcodes, the 6'th vector contains the
image size to load.

Additionally the PMECC header can be written by the atmelimage target. The
parameters must be given via the -n switch as a coma separated list. For
example:

mkimage -T atmelimage \
 -n usePmecc=1,sectorPerPage=4,sectorSize=512,spareSize=64,eccBits=4,eccOffset=36 \
 -d spl/u-boot-spl.bin boot.bin

A provided image can be checked for correct header setup. It prints out the
PMECC header parameters if it has one and the 6'th interrupt vector content.

---8<---
Image Type:	ATMEL ROM-Boot Image with PMECC Header
		PMECC header
		====================
		eccOffset:        36
		sectorSize:      512
		eccBitReq:         4
		spareSize:        64
		nbSectorPerPage:   4
		usePmecc:          1
		====================
		6'th vector has 17044 set
--->8---

A SPL binary modified with the atmelimage mkimage target was succesfully
booted on a sama5d34ek via MMC and NAND.
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Heiko Schocher <hs@denx.de>
Tested-by: NBo Shen <voice.shen@atmel.com>

Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
Cc: Heiko Schocher <hs@denx.de>

Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following
warning on boot:

"Warning: Your board does not use generic board. Please read
doc/README.generic-board and take action. Boards not
upgraded by the late 2014 may break or be removed."
Signed-off-by: NBo Shen <voice.shen@atmel.com>
Tested-by: NJosh Wu <josh.wu@atmel.com>
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>

Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following
warning on boot:

"Warning: Your board does not use generic board. Please read
doc/README.generic-board and take action. Boards not
upgraded by the late 2014 may break or be removed."
Signed-off-by: NBo Shen <voice.shen@atmel.com>
Tested-by: NJosh Wu <josh.wu@atmel.com>
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>

Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following
warning on boot:

"Warning: Your board does not use generic board. Please read
doc/README.generic-board and take action. Boards not
upgraded by the late 2014 may break or be removed."
Signed-off-by: NBo Shen <voice.shen@atmel.com>
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>

Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following
warning on boot:

"Warning: Your board does not use generic board. Please read
doc/README.generic-board and take action. Boards not
upgraded by the late 2014 may break or be removed."
Signed-off-by: NBo Shen <voice.shen@atmel.com>
Tested-by: NJosh Wu <josh.wu@atmel.com>
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>

It supports boot from NAND and SD/MMC card.
Signed-off-by: NBo Shen <voice.shen@atmel.com>
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>

Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>

Add support for booting from an MMC card.
Signed-off-by: NStefan Roese <sr@denx.de>
Signed-off-by: NHenrik Nordström <henrik@henriknordstrom.net>
Signed-off-by: NIan Campbell <ijc@hellion.org.uk>
Reviewed-by: NMarek Vasut <marex@denx.de>
Cc: Tom Cubie <Mr.hipboi@gmail.com>
Reviewed-by: NTom Rini <trini@ti.com>

On Mon, 2014-05-05 at 14:18 +0200, Stefan Roese wrote:
> > +	case 1:
> > +#if CONFIG_MMC1_PG

> Are you sure that this is correct and shouldn't be:
>
> +#ifdef CONFIG_MMC1_PG
>
> ?

It's "correct" in so far as it works (the boards.cfg config stuff
#defines things to 1), but I think you are right that it isn't the
preferred style. But...

> A quick scan through this patch series shows that this define
> is not set at all. Perhaps its outdated? Or is it used to support
> some other sunxi SoC? Not sure, perhaps it should be removed for
> now.

...I had thought that it was to support some other board which wasn't
being upstreamed right now, so eventually useful and harmless for now,
but I've just checked and it isn't actually used by any of the boards in
u-boot-sunxi.git. So rather than fix it to use #ifdef lets drop it.
Rather than resend the entire series, here is v5.1 of this patch.

> Other than this please add my:
>
> Reviewed-by: Stefan Roese <sr@denx.de>

Thanks!

8<---------------------------------

>From 20704e35a41664de5f516ed0e02981ac06085102 Mon Sep 17 00:00:00 2001
From: Ian Campbell <ijc@hellion.org.uk>
Date: Fri, 7 Mar 2014 04:29:39 +0000
Subject: [PATCH v5.1 7/8] sunxi: mmc support

This adds support for the MMC controller on the Allwinner A20 (sun7i)
processor.
Signed-off-by: NHenrik Nordstrom <henrik@henriknordstrom.net>
Signed-off-by: NLuke Leighton <lkcl@lkcl.net>
Signed-off-by: NOliver Schinagl <oliver@schinagl.nl>
Signed-off-by: NWills Wang <wills.wang.open@gmail.com>
Signed-off-by: NIan Campbell <ijc@hellion.org.uk>
Reviewed-by: NMarek Vasut <marex@denx.de>
Reviewed-by: NStefan Roese <sr@denx.de>
Cc: Tom Cubie <Mr.hipboi@gmail.com>
Cc: Aaron Maoye <leafy.myeh@allwinnertech.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Reviewed-by: NTom Rini <trini@ti.com>

Add support for the GMAC Ethernet controller on Allwinner A20 (sun7i)
processors. Enable for the Cubietruck.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NJens Kuske <jenskuske@gmail.com>
Signed-off-by: NIan Campbell <ijc@hellion.org.uk>
Reviewed-by: NMarek Vasut <marex@denx.de>
Reviewed-by: NTom Rini <trini@ti.com>

This patch adds generic board, start of day and basic build system support for
the Allwinner A20 (sun7i) processor. This code will not been compiled until the
build is hooked up in a later patch. It has been split out to keep the patches
manageable.
Signed-off-by: NAdam Sampson <ats@offog.org>
Signed-off-by: NAleksei Mamlin <mamlinav@gmail.com>
Signed-off-by: NAlexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NEmilio López <emilio@elopez.com.ar>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NHenrik Nordstrom <henrik@henriknordstrom.net>
Signed-off-by: NJens Kuske <jenskuske@gmail.com>
Signed-off-by: NLuc Verhaegen <libv@skynet.be>
Signed-off-by: NLuke Leighton <lkcl@lkcl.net>
Signed-off-by: NOliver Schinagl <oliver@schinagl.nl>
Signed-off-by: NPatrick Wood <patrickhwood@gmail.com>
Signed-off-by: NStefan Roese <sr@denx.de>
Signed-off-by: NWills Wang <wills.wang.open@gmail.com>
Signed-off-by: NIan Campbell <ijc@hellion.org.uk>
Reviewed-by: NMarek Vasut <marex@denx.de>
Cc: Tom Cubie <Mr.hipboi@gmail.com>
Reviewed-by: NTom Rini <trini@ti.com>