Rename bootretry functions and remove #ifdefs

Add a bootretry_ prefix to these two functions, and remove the need for
the #ifdef around everything (it moves to the Makefile).
Signed-off-by: NSimon Glass <sjg@chromium.org>

board/hymod/hymod.c

@@ -415,13 +415,11 @@ last_stage_init (void)
 	hymod_conf_t *cp = &gd->bd->bi_hymod_conf;
 	int rc;
 
-#ifdef CONFIG_BOOT_RETRY_TIME
 	/*
 	 * we use the cli_readline() function, but we also want
 	 * command timeout enabled
 	 */
-	init_cmd_timeout ();
-#endif
+	bootretry_init_cmd_timeout();
 
 	memset ((void *) cp, 0, sizeof (*cp));
 

board/hymod/input.c

@@ -16,9 +16,7 @@ hymod_get_serno (const char *prompt)
 		int n, serno;
 		char *p;
 
-#ifdef CONFIG_BOOT_RETRY_TIME
-		reset_cmd_timeout ();
-#endif
+		bootretry_reset_cmd_timeout();
 
 		n = cli_readline(prompt);
 
@@ -44,9 +42,7 @@ hymod_get_ethaddr (void)
 	for (;;) {
 		int n;
 
-#ifdef CONFIG_BOOT_RETRY_TIME
-		reset_cmd_timeout ();
-#endif
+		bootretry_reset_cmd_timeout();
 
 		n = cli_readline("Enter board ethernet address: ");
 

common/autoboot.c

@@ -113,11 +113,9 @@ static int abortboot_keyed(int bootdelay)
 						delaykey[i].retry ? "delay" :
 						"stop");
 
-#  ifdef CONFIG_BOOT_RETRY_TIME
 				/* don't retry auto boot */
 				if (!delaykey[i].retry)
 					bootretry_dont_retry();
-#  endif
 				abort = 1;
 			}
 		}
@@ -305,9 +303,7 @@ void bootdelay_process(void)
 #if defined(CONFIG_MENU_SHOW)
 	bootdelay = menu_show(bootdelay);
 #endif
-# ifdef CONFIG_BOOT_RETRY_TIME
-	init_cmd_timeout();
-# endif	/* CONFIG_BOOT_RETRY_TIME */
+	bootretry_init_cmd_timeout();
 
 #ifdef CONFIG_POST
 	if (gd->flags & GD_FLG_POSTFAIL) {

common/bootretry.c

@@ -21,7 +21,7 @@ static int      retry_time = -1; /* -1 so can call readline before main_loop */
 /***************************************************************************
  * initialize command line timeout
  */
-void init_cmd_timeout(void)
+void bootretry_init_cmd_timeout(void)
 {
 	char *s = getenv("bootretry");
 
@@ -37,7 +37,7 @@ void init_cmd_timeout(void)
 /***************************************************************************
  * reset command line timeout to retry_time seconds
  */
-void reset_cmd_timeout(void)
+void bootretry_reset_cmd_timeout(void)
 {
 	endtime = endtick(retry_time);
 }

common/cli_hush.c

@@ -1000,12 +1000,7 @@ static void get_user_input(struct in_str *i)
 	int n;
 	static char the_command[CONFIG_SYS_CBSIZE + 1];
 
-#ifdef CONFIG_BOOT_RETRY_TIME
-#  ifndef CONFIG_RESET_TO_RETRY
-#	error "This currently only works with CONFIG_RESET_TO_RETRY enabled"
-#  endif
-	reset_cmd_timeout();
-#endif
+	bootretry_reset_cmd_timeout();
 	i->__promptme = 1;
 	if (i->promptmode == 1) {
 		n = cli_readline(CONFIG_SYS_PROMPT);

common/cli_simple.c

@@ -265,14 +265,12 @@ void cli_loop(void)
 	int rc = 1;
 
 	for (;;) {
-#ifdef CONFIG_BOOT_RETRY_TIME
 		if (rc >= 0) {
 			/* Saw enough of a valid command to
 			 * restart the timeout.
 			 */
-			reset_cmd_timeout();
+			bootretry_reset_cmd_timeout();
 		}
-#endif
 		len = cli_readline(CONFIG_SYS_PROMPT);
 
 		flag = 0;	/* assume no special flags for now */

common/cmd_i2c.c

@@ -564,9 +564,7 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg
 	if (argc != 3)
 		return CMD_RET_USAGE;
 
-#ifdef CONFIG_BOOT_RETRY_TIME
-	reset_cmd_timeout();	/* got a good command to get here */
-#endif
+	bootretry_reset_cmd_timeout();	/* got a good command to get here */
 	/*
 	 * We use the last specified parameters, unless new ones are
 	 * entered.
@@ -623,9 +621,8 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg
 			if (incrflag)
 				addr += size;
 			nbytes = size;
-#ifdef CONFIG_BOOT_RETRY_TIME
-			reset_cmd_timeout(); /* good enough to not time out */
-#endif
+			/* good enough to not time out */
+			bootretry_reset_cmd_timeout();
 		}
 #ifdef CONFIG_BOOT_RETRY_TIME
 		else if (nbytes == -2)
@@ -642,12 +639,10 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg
 			data = be32_to_cpu(data);
 			nbytes = endp - console_buffer;
 			if (nbytes) {
-#ifdef CONFIG_BOOT_RETRY_TIME
 				/*
 				 * good enough to not time out
 				 */
-				reset_cmd_timeout();
-#endif
+				bootretry_reset_cmd_timeout();
 				if (i2c_write(chip, addr, alen, (uchar *)&data, size) != 0)
 					puts ("Error writing the chip.\n");
 #ifdef CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS

common/cmd_mem.c

@@ -1098,9 +1098,7 @@ mod_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const argv[])
 	if (argc != 2)
 		return CMD_RET_USAGE;
 
-#ifdef CONFIG_BOOT_RETRY_TIME
-	reset_cmd_timeout();	/* got a good command to get here */
-#endif
+	bootretry_reset_cmd_timeout();	/* got a good command to get here */
 	/* We use the last specified parameters, unless new ones are
 	 * entered.
 	 */
@@ -1159,9 +1157,8 @@ mod_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const argv[])
 			if (incrflag)
 				addr += nbytes ? -size : size;
 			nbytes = 1;
-#ifdef CONFIG_BOOT_RETRY_TIME
-			reset_cmd_timeout(); /* good enough to not time out */
-#endif
+			/* good enough to not time out */
+			bootretry_reset_cmd_timeout();
 		}
 #ifdef CONFIG_BOOT_RETRY_TIME
 		else if (nbytes == -2) {
@@ -1177,11 +1174,9 @@ mod_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const argv[])
 #endif
 			nbytes = endp - console_buffer;
 			if (nbytes) {
-#ifdef CONFIG_BOOT_RETRY_TIME
 				/* good enough to not time out
 				 */
-				reset_cmd_timeout();
-#endif
+				bootretry_reset_cmd_timeout();
 				if (size == 4)
 					*((u32 *)ptr) = i;
 #ifdef CONFIG_SYS_SUPPORT_64BIT_DATA

common/cmd_pci.c

@@ -355,9 +355,8 @@ pci_cfg_modify (pci_dev_t bdf, ulong addr, ulong size, ulong value, int incrflag
 			if (incrflag)
 				addr += nbytes ? -size : size;
 			nbytes = 1;
-#ifdef CONFIG_BOOT_RETRY_TIME
-			reset_cmd_timeout(); /* good enough to not time out */
-#endif
+			/* good enough to not time out */
+			bootretry_reset_cmd_timeout();
 		}
 #ifdef CONFIG_BOOT_RETRY_TIME
 		else if (nbytes == -2) {
@@ -369,11 +368,9 @@ pci_cfg_modify (pci_dev_t bdf, ulong addr, ulong size, ulong value, int incrflag
 			i = simple_strtoul(console_buffer, &endp, 16);
 			nbytes = endp - console_buffer;
 			if (nbytes) {
-#ifdef CONFIG_BOOT_RETRY_TIME
 				/* good enough to not time out
 				 */
-				reset_cmd_timeout();
-#endif
+				bootretry_reset_cmd_timeout();
 				pci_cfg_write (bdf, addr, size, i);
 				if (incrflag)
 					addr += size;

include/bootretry.h

@@ -5,8 +5,8 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#ifndef __bootretry_h
-#define __bootretry_h
+#ifndef __BOOTRETRY_H
+#define __BOOTRETRY_H
 
 #ifdef CONFIG_BOOT_RETRY_TIME
 /**
@@ -18,14 +18,42 @@
  * @return 0 if a key is received in time, -ETIMEDOUT if not
  */
 int bootretry_tstc_timeout(void);
+
+/**
+ * bootretry_init_cmd_timeout() - set up command timeout
+ *
+ * Get the required command timeout from the environment.
+ */
+void bootretry_init_cmd_timeout(void);
+
+/**
+ * bootretry_reset_cmd_timeout() - reset command timeout
+ *
+ * Reset the command timeout so that the user has a fresh start. This is
+ * typically used when input is received from the user.
+ */
+void bootretry_reset_cmd_timeout(void);
+
+/** bootretry_dont_retry() - Indicate that we should not retry the boot */
+void bootretry_dont_retry(void);
 #else
 static inline int bootretry_tstc_timeout(void)
 {
 	return 0;
 }
-#endif
 
-void init_cmd_timeout(void);
-void reset_cmd_timeout(void);
+static inline void bootretry_init_cmd_timeout(void)
+{
+}
+
+static inline void bootretry_reset_cmd_timeout(void)
+{
+}
+
+static inline void bootretry_dont_retry(void)
+{
+}
+
+#endif
 
 #endif

include/cli.h

@@ -100,9 +100,6 @@ int cli_readline_into_buffer(const char *const prompt, char *buffer,
  */
 int cli_simple_parse_line(char *line, char *argv[]);
 
-/** bootretry_dont_retry() - Indicate that we should not retry the boot */
-void bootretry_dont_retry(void);
-
 #define endtick(seconds) (get_ticks() + (uint64_t)(seconds) * get_tbclk())
 
 #endif