Start using the new Kconfig options which are available for these now,
and simply always enable them by selecting them as sunxi builds always
include USB support.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NIan Campbell <ijc@hellion.org.uk>
Reviewed-by: NSimon Glass <sjg@chromium.org>

With certain features being convert to DM now we want sunxi to default
to having DM enabled for ETH/SERIAL and USB in some cases.

Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: NTom Rini <trini@konsulko.com>
[hdegoede@redhat.com: Also select CONFIG_USB for all sunxi builds]
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NIan Campbell <ijc@hellion.org.uk>
Reviewed-by: NSimon Glass <sjg@chromium.org>

This patch does all the board configurations required to use the qspi
controller & attached spi flash memory.
Signed-off-by: NVikas Manocha <vikas.manocha@st.com>
Reviewed-by: NJagannadh Teki <jteki@openedev.com>

This commit moves:
- CONFIG_OF_CONTROL
- SPL_DISABLE_OF_CONTROL

from zynq_*_defconfig files into arch/arm/Kconfig "config ARCH_ZYNQ"
Signed-off-by: NJagan Teki <jteki@openedev.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>

Enabled CONFIG_DM_SPI and CONFIG_DM_SPI_FLASH for zynq soc.
Signed-off-by: NJagan Teki <jteki@openedev.com>
Acked-by: NSimon Glass <sjg@chromium.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Tested-by: NJagan Teki <jteki@openedev.com>

This is the first patch to remove the
CONFIG_SYS_EXTRA_OPTIONS.

This patch implements CPU type selection from Kconfig.
Further Kconfig stuff is added later.
Signed-off-by: NMarkus Niebel <Markus.Niebel@tq-group.com>

Update new naming scheme.
Signed-off-by: NSamuel Egli <samuel.egli@siemens.com>
Acked-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NTom Rini <trini@konsulko.com>

rastaban is a draco version with more flash, more RAM
and faster CPU. Number of partitions is the same but
rootfs partition is different.
Signed-off-by: NSamuel Egli <samuel.egli@siemens.com>
Acked-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NTom Rini <trini@konsulko.com>

Vision Systems's Baltos is based on AM335x SoC
from Texas Instruments. This patch adds support
such Industrial PCs in mainline u-boot.

[ balbi@ti.com: updated original patch to current u-boot ]
Signed-off-by: NYegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

We plan to enable device tree in SPL by default. Before doing this,
explicitly disable it for all boards.
Signed-off-by: NSimon Glass <sjg@chromium.org>

The business for UniPhier Soc family has been transferred from
Panasonic Corporation to Socionext Inc.

Update the SoC select menu in Kconfig.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

add support for imx6dl based aristainetos2 board

U-Boot 2015.04-rc5-00066-g60f6ed4 (Apr 10 2015 - 08:46:27)

CPU:   Freescale i.MX6DL rev1.1 at 792 MHz
Reset cause: WDOG
Board: aristaitenos2
       Watchdog enabled
I2C:   ready
DRAM:  1 GiB
NAND:  1024 MiB
MMC:   FSL_SDHC: 0
SF: Detected N25Q128A with page size 256 Bytes, erase size 64 KiB, total 16 MiB
Display: lg4573 (480x800)
In:    serial
Out:   serial
Err:   serial
Net:   FEC [PRIME]
Hit any key to stop autoboot:  0
=>
Signed-off-by: NHeiko Schocher <hs@denx.de>

Currently we need to build one U-boot image for each of the wandboard
variants: quad, dual-lite and solo.

By switching to SPL we can support all these variants with a single binary,
which is very convenient.

Based on the work from Richard Hu.

Tested kernel booting on the three boards.
Signed-off-by: NRichard Hu <hakahu@gmail.com>
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Tested-by: NVagrant Cascadian <vagrant@aikidev.net>
Reviewed-by: NStefano Babic <sbabic@denx.de>

Hummingboard dual, dual-lite and solo are now supported via SPL mechanism.

Remove the previous hummingboard support, which does not use SPL and supported
only the solo variant.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

By making the board selections optional, every defconfig will include
the board selection when running savedefconfig so if a new board is
added to the top of the list of choices the former top's defconfig will
still be correct.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NStephen Warren <swarren@wwwdotorg.org>
Cc: Tom Rini <trini@konsulko.com>

Switch to a more standard way of board select; put the SoC select
into arch/arm/Kconfig and move the board select menu under
arch/arm/mach-socfpga/Kconfig.

Also, consolidate SYS_BOARD, SYS_VENDOR, SYS_SOC, SYS_CONFIG_NAME.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

This patch adds support for the Marvell DB-88F6820-GP Armada A38x
evaluation board.

Supported peripherals are:
- UART
- Ethernet (mvneta)
- I2C
- SPI (including SPI NOR flash)

Please note that this board support right now only supports the
main U-Boot. Without the bin_hdr integration (DDR training etc). This
will be added in a few days / weeks to complete this board port. But
till then this U-Boot version can be run on the target via the
original Marvell U-Boot via this command:

tftpboot 4000000 db-88f6820-gp/u-boot.bin;go 4000000
Signed-off-by: NStefan Roese <sr@denx.de>
Tested-by: NKevin Smith <kevin.smith@elecsyscorp.com>
Tested-by: NDirk Eibach <dirk.eibach@gdsys.cc>

Now that we've everything prepared for it remove the DM settings from the
defconfig(s) and simply always set them for sunxi.

This makes all sunxi boards allways use the driver model for gpios and
ethernet, and allows us to move over more bits to the driver-model without
the need to introduce #ifdef-ery for boards which are not yet using DM.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Acked-by: NIan Campbell <ijc@hellion.org.uk>

Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Move arch/arm/cpu/armv7/zynq/* -> arch/arm/mach-zynq/*
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Enable NAND boot support using SPL framework. To boot from
NAND, either use DIP switches on board, or "qixis_reset nand"
command. Details of forming NAND image can be found in README.
Signed-off-by: NScott Wood <scottwood@freescale.com>
[York Sun: Remove +S from defconfig after commit 252ed872]
Signed-off-by: NYork Sun <yorksun@freescale.com>

This adds NAND boot support for LS2085AQDS, using SPL framework.
Details of forming NAND image can be found in README.
Signed-off-by: NScott Wood <scottwood@freescale.com>
[York Sun: Remove +S from defconfig after commit 252ed872]
Signed-off-by: NYork Sun <yorksun@freescale.com>

This adds initial support for Colibri VF50/VF61 based on Freescale
Vybrid SoC.

- CPU clocked at 396/500 MHz
- DDR3 at 396MHz
  - for VF50, use PLL2 as memory clock (synchronous mode)
  - for VF61, use PLL1 as memory clock (asynchronous mode)
- Console on UART0 (Colibri UART_A)
- Ethernet on FEC1
- PLL5 based RMII clocking (E.g. No external crystal)
- UART_A and UART_C I/O muxing
- Boot from NAND by default

Tested on Colibri VF50/VF61 booting using serial loader over UART.
Signed-off-by: NSanchayan Maity <maitysanchayan@gmail.com>
Acked-by: NStefan Agner <stefan@agner.ch>

The LS2085ARDB is a evaluation platform that supports LS2085A
family SoCs. This patch add sbasic support for the platform.
Signed-off-by: NYork Sun <yorksun@freescale.com>
Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: NBhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: NScott Wood <scottwood@freescale.com>

The LS2085AQDS is an evaluatoin platform that supports the LS2085A
family SoCs. This patch add basic support of the platform.
Signed-off-by: NYork Sun <yorksun@freescale.com>
Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: NBhupesh Sharma <bhupesh.sharma@freescale.com>

The board/SoC select menu in arch/arm/Kconfig is still cluttered.
Add ARCH_INTEGRATOR into arch/arm/Kconfig and move the board select
under arch/arm/mach-integrator.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Cc: Linus Walleij <linus.walleij@linaro.org>

Signed-off-by: NKamil Lulko <rev13@wp.pl>
Reviewed-by: NTom Rini <trini@konsulko.com>

Signed-off-by: NKamil Lulko <rev13@wp.pl>

Add the initial SPL support for HummingBoard-i2eX, which is based on a
MX6 Dual.

For more information about HummingBoard, please check:
http://www.solid-run.com/products/hummingboard/

Based on the work from Jon Nettleton and Rabeeh Khoury.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NSimon Glass <sjg@chromium.org>

Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NSimon Glass <sjg@chromium.org>

Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NSimon Glass <sjg@chromium.org>

Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NSimon Glass <sjg@chromium.org>

Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NSimon Glass <sjg@chromium.org>

All the Zynq boards have switch to Driver Model.
"select DM" is better than default value in each defconfig.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NSimon Glass <sjg@chromium.org>

All the UniPhier boards have switch to Driver Model.
"select DM" is better than default value in each defconfig.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NSimon Glass <sjg@chromium.org>

As mentioned in the previous commit, adding default values in each
Kconfig causes problems because it does not co-exist with the
"depends on" syntax.  (Please note this is not a bug of Kconfig.)
We should not do so unless we have a special reason.  Actually,
for CONFIG_DM*, we have no good reason to do so.

Generally, CONFIG_DM is not a user-configurable option.  Once we
convert a driver into Driver Model, the board only works with Driver
Model, i.e. CONFIG_DM must be always enabled for that board.
So, using "select DM" is more suitable rather than allowing users to
modify it.  Another good thing is, Kconfig warns unmet dependencies
for "select" syntax, so we easily notice bugs.

Actually, CONFIG_DM and other related options have been added
without consistency: some into arch/*/Kconfig, some into
board/*/Kconfig, and some into configs/*_defconfig.

This commit prefers "select" and cleans up the following issues.

[1] Never use "CONFIG_DM=n" in defconfig files

It is really rare to add "CONFIG_FOO=n" to disable CONFIG options.
It is more common to use "# CONFIG_FOO is not set".  But here, we
do not even have to do it.
Less than half of OMAP3 boards have been converted to Driver Model.
Adding the default values to arch/arm/cpu/armv7/omap3/Kconfig is
weird.  Instead, add "select DM" only to appropriate boards, which
eventually eliminates "CONFIG_DM=n", etc.

[2] Delete redundant CONFIGs

Sandbox sets CONFIG_DM in arch/sandbox/Kconfig and defines it again
in configs/sandbox_defconfig.
Likewise, OMAP3 sets CONFIG_DM arch/arm/cpu/armv7/omap3/Kconfig and
defines it also in omap3_beagle_defconfig and devkit8000_defconfig.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Work_92105 from Work Microwave is an LPC3250-
based board with the following features:
- 64MB or 128MB SDR DRAM
- 1 GB SLC NAND, managed through MLC controller.
- Ethernet
- Ethernet + PHY SMSC8710
- I2C:
  - EEPROM (24M01-compatible)
  - RTC (DS1374-compatible)
  - Temperature sensor (DS620)
  - DACs (2 x MAX518)
- SPI (through SSP interface)
  - Port expander MAX6957
- LCD display (HD44780-compatible), controlled
  through the port expander and DACs

This board has SPL support, and uses the LPC32XX boot
image format.
Signed-off-by: NAlbert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>

Move the MX5 based boards to arch/arm/cpu/armv7/mx5, following the
commit: 89ebc821Signed-off-by: NAndrej Rosano <andrej@inversepath.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Vagrant Cascadian <vagrant@debian.org>
Tested-by: NChris Kuethe <chris.kuethe@gmail.com>

BCM2835 (used on Raspberry Pi) and BCM2836 (used on Raspberry Pi 2)
are similar enough.  One of the biggest differences is the ARM
processor.  It is reasonable to collect the source files into a
single place, arch/arm/mach-bcm283x/.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NStephen Warren <swarren@wwwdotorg.org>