- 21 8月, 2015 3 次提交
-
-
由 Wu, Josh 提交于
As all sama5 nandflash env configurations are same, so move them to at91-sama5_common.h. Signed-off-by: NJosh Wu <josh.wu@atmel.com>
-
由 Wu, Josh 提交于
Since sama5d3xek boards has different type of dtb blobs, so we need to detect the cpu type in runtime. So we add a new variable $dtb_name. if $dtb_name is not defined, we just use at91-${board_name}.dtb as the $dtb_name. Otherwise, we will just load the dtb with $dtb_name. For sama5d3xek, we will detect cpu type and make up $dtb_name in runtime. Signed-off-by: NJosh Wu <josh.wu@atmel.com>
-
由 Wu, Josh 提交于
As almost all sama5 sd/mmc env configurations are same, so move them to at91-sama5_common.h. Also define CONFIG_ENV_VARS_UBOOT_CONFIG to have the varaible: $board_name. Then we can use 'at91-${board_name}.dtb' as the dtb name. TODO: since sama5d3xek has different dtb name, we need to some extra stuff to make it work on sama5d3xek boards. Signed-off-by: NJosh Wu <josh.wu@atmel.com>
-
- 26 6月, 2015 2 次提交
-
-
由 Joe Hershberger 提交于
This sets the default commands Kconfig to match include/config_cmd_default.h commands in the common/Kconfig and removes them from include/configs. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Joe Hershberger 提交于
Some archs/boards specify their own default by pre-defining the config which causes the Kconfig system to mix up the order of the configs in the defconfigs... This will cause merge pain if allowed to proliferate. Remove the configs that behave this way from the archs. A few configs still remain, but that is because they only exist as defaults and do not have a proper Kconfig entry. Those appear to be: SPIFLASH DISPLAY_BOARDINFO Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates, drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 01 4月, 2015 1 次提交
-
-
由 Wu, Josh 提交于
Create a new configuration file: at91-sama5_common.h. Which includes the configurations that reused by all SAMA5 chips. at91-sama5_common.h includes: - hw macros (clock, text_base and etc.) - default commands. - BOOTARGS - U-Boot common configs. NOTE: NOR flash definition should be put before including the common header. For sama5d3-xplained: - add CMD_SETEXPR For sama5d3xek: - add CMD_SETEXPR - change CONFIG_SYS_MALLOC_LEN to (4*1024*1024) Signed-off-by: NJosh Wu <josh.wu@atmel.com>
-
- 19 3月, 2015 1 次提交
-
-
由 Bo Shen 提交于
As the u-boot-spl.lds is used only for armv7 SoCs (includes sama5d3 and sama5d4), so move it to armv7 directory. Signed-off-by: NBo Shen <voice.shen@atmel.com>
-
- 21 2月, 2015 1 次提交
-
-
由 Masahiro Yamada 提交于
This commit moves source files as follows: arch/arm/cpu/arm920t/at91/* -> arch/arm/mach-at91/arm920t/* arch/arm/cpu/arm926ejs/at91/* -> arch/arm/mach-at91/arm926ejs/* arch/arm/cpu/armv7/at91/* -> arch/arm/mach-at91/armv7/* arch/arm/cpu/at91-common/* -> arch/arm/mach-at91/* Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NAndreas Bießmann <andreas.devel@googlemail.co>
-
- 08 2月, 2015 1 次提交
-
-
由 Wu, Josh 提交于
This patch will save U-Boot environment as a file: uboot.env, in FAT partition instead of in raw sector of MMC card. This make us easier to manage the environment file. Signed-off-by: NJosh Wu <josh.wu@atmel.com> Acked-by: NBo Shen <voice.shen@atmel.com>
-
- 05 12月, 2014 1 次提交
-
-
由 Paul Kocialkowski 提交于
CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION ought to be called CONFIG_SYS_MMCSD_FS_BOOT_PARTITION to keep it consistent with other config options such as: CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR. In addition, it is not related to raw mode booting but to fs mode instead. Signed-off-by: NPaul Kocialkowski <contact@paulk.fr> Reviewed-by: NTom Rini <trini@ti.com>
-
- 27 10月, 2014 1 次提交
-
-
由 Guillaume GARDET 提交于
Rename some defines containing FAT in their name to be filesystem generic: MMCSD_MODE_FAT => MMCSD_MODE_FS CONFIG_SPL_FAT_LOAD_ARGS_NAME => CONFIG_SPL_FS_LOAD_ARGS_NAME CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME => CONFIG_SPL_FS_LOAD_PAYLOAD_NAME CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION => CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION Signed-off-by: NGuillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@ti.com>
-
- 24 9月, 2014 1 次提交
-
-
由 Nikita Kiryanov 提交于
Currently, CONFIG_SPL_SPI_* #defines are used for controlling SPI boot in SPL. These #defines do not allow the user to select SPI mode for the SPI flash (there's no CONFIG_SPL_SPI_MODE, so the SPI mode is hardcoded in spi_spl_load.c), and duplicate information already provided by CONFIG_SF_DEFAULT_* #defines. Kill CONFIG_SPL_SPI_*, and use CONFIG_SF_DEFAULT_* instead. Cc: Tom Rini <trini@ti.com> Cc: Marek Vasut <marex@denx.de> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Vitaly Andrianov <vitalya@ti.com> Cc: Lars Poeschel <poeschel@lemonage.de> Cc: Bo Shen <voice.shen@atmel.com> Cc: Hannes Petermaier <hannes.petermaier@br-automation.com> Cc: Michal Simek <monstr@monstr.eu> Acked-by: NMarek Vasut <marex@denx.de> Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il> Reviewed-by: NJagannadha Sutradharudu Teki <jaganna@xilinx.com>
-
- 19 9月, 2014 1 次提交
-
-
由 Bo Shen 提交于
Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
- 31 7月, 2014 1 次提交
-
-
由 Masahiro Yamada 提交于
Now CONFIG_SPL and CONFIG_TPL are defined in Kconfig. Remove the redundant definition in config headers. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 30 7月, 2014 1 次提交
-
-
由 Masahiro Yamada 提交于
We are about to switch to Kconfig in the next commit. But there are something to get done beforehand. In Kconfig, include/generated/autoconf.h defines boolean CONFIG macros as 1. CONFIG_SPL and CONFIG_TPL, if defined, must be set to 1. Otherwise, when switching to Kconfig, the build log would be sprinkled with warning messages like this: warning: "CONFIG_SPL" redefined [enabled by default] Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 27 5月, 2014 3 次提交
-
-
由 Wu, Josh 提交于
Now the AT91FAMILY is already defined in the at91 SoC header. The at91 board config file will include the SoC header file. So we can remove the redundant AT91FAMILY definition in at91 board config files. Signed-off-by: NJosh Wu <josh.wu@atmel.com> [rebase patch] Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Andreas Bießmann 提交于
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com> Cc: Bo Shen <voice.shen@atmel.com> Tested-by: NBo Shen <voice.shen@atmel.com>
-
由 Bo Shen 提交于
Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following warning on boot: "Warning: Your board does not use generic board. Please read doc/README.generic-board and take action. Boards not upgraded by the late 2014 may break or be removed." Signed-off-by: NBo Shen <voice.shen@atmel.com> Tested-by: NJosh Wu <josh.wu@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
- 10 3月, 2014 2 次提交
-
-
由 Bo Shen 提交于
Add NAND SPL boot support with hardware PMECC. Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Bo Shen 提交于
Add SPI SPL boot support for sama5d3xek board. Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
- 02 12月, 2013 1 次提交
-
-
由 Bo Shen 提交于
Enable Atmel sama5d3xek boart spl boot support, which can load u-boot from SD card with FAT file system. Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
- 05 11月, 2013 2 次提交
-
-
由 Bo Shen 提交于
Get rid of too many ifdeffery in usb ohci driver Add following two configuration for USB clock selecting - CONFIG_USB_ATMEL_CLK_SEL_PLLB: using PLLB as usb ohci input clock - CONFIG_USB_ATMEL_CLK_SEL_UPLL: using UPLL as usb ohci input clock Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Rob Herring 提交于
Remove platform CONFIG_SYS_HZ definition for configs a-z*. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
- 24 9月, 2013 1 次提交
-
-
由 Bo Shen 提交于
Add RNDIS gadget support to test atmel usba udc driver Signed-off-by: NBo Shen <voice.shen@atmel.com>
-
- 04 9月, 2013 1 次提交
-
-
由 Bo Shen 提交于
Drop unused CONFIG_NET_MULTI Signed-off-by: NBo Shen <voice.shen@gmail.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
- 22 8月, 2013 4 次提交
-
-
由 Bo Shen 提交于
fix typo error for CONFIG_ENV_IS_NOWHERE from CONIG_ENV_IS_NOWHERE Signed-off-by: NBo Shen <voice.shen@gmail.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Bo Shen 提交于
The CONFIG_MAX_NAND_CHIPS never used, remove it No where define LCD_TEST_PATTERN, so no need undefine Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Wu, Josh 提交于
Define the galois index table offset in chip head file. So user do not need to set by himself. Driver will set it correctly according to sector_size. Signed-off-by: NJosh Wu <josh.wu@atmel.com> Acked-by: NScott Wood <scottwood@freescale.com> [rebased on master] Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Bo Shen 提交于
add gmac support for sama5d3xek board, the gmac embedded in: - sama5d33, sama5d34, sama5d35 Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
- 24 7月, 2013 1 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: NTom Rini <trini@ti.com>
-
- 21 5月, 2013 1 次提交
-
-
由 Bo Shen 提交于
Add sama5d3xek support with following feature - boot from NAND flash, PMECC support, 4bit ECC @ 512 bytes sector - boot from SPI flash support - boot from SD card support - LCD support - EMAC support - USB OHCI support Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
- 12 3月, 2013 2 次提交
-
-
由 Bo Shen 提交于
Change nand flash partition table according to www.at91.com/linux4sam more information: http://www.at91.com/linux4sam/bin/view/Linux4SAM/GettingStarted#Linux4SAM_NandFlash_demo_MemorySigned-off-by: NBo Shen <voice.shen@atmel.com> [minor commit message changes] Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Nicolas Ferre 提交于
Support to boot zImage Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> [Add bootz for at91rm9200, at91sam9263, at91sam9rl] Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
- 12 1月, 2013 1 次提交
-
-
由 Bo Shen 提交于
Add dataflash boot support on at91sam9x5ek board Signed-off-by: NBo Shen <voice.shen@atmel.com> Acked-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
- 10 12月, 2012 2 次提交
-
-
由 Richard Genoud 提交于
Signed-off-by: NRichard Genoud <richard.genoud@gmail.com> Acked-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Richard Genoud 提交于
Signed-off-by: NRichard Genoud <richard.genoud@gmail.com> Acked-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
- 28 11月, 2012 1 次提交
-
-
由 Wu, Josh 提交于
Signed-off-by: NJosh Wu <josh.wu@atmel.com> Acked-by: NAndreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
- 17 10月, 2012 1 次提交
-
-
由 Wu, Josh 提交于
Signed-off-by: NJosh Wu <josh.wu@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
- 18 9月, 2012 1 次提交
-
-
由 Bo Shen 提交于
The mainline linux kernel is moving to flatten device tree support Add the CONFIG_OF_LIBFDT option to support booting DT linux kernel Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
- 01 9月, 2012 1 次提交
-
-
由 Wu, Josh 提交于
Signed-off-by: NJosh Wu <josh.wu@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-