Rename some defines containing FAT in their name to be filesystem generic

Rename some defines containing FAT in their name to be filesystem generic:
MMCSD_MODE_FAT => MMCSD_MODE_FS
CONFIG_SPL_FAT_LOAD_ARGS_NAME => CONFIG_SPL_FS_LOAD_ARGS_NAME
CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME => CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION => CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION
Signed-off-by: NGuillaume GARDET <guillaume.gardet@free.fr>
Cc: Tom Rini <trini@ti.com>

arch/arm/cpu/arm1136/mx35/generic.c

@@ -531,7 +531,7 @@ u32 spl_boot_mode(void)
 	switch (spl_boot_device()) {
 	case BOOT_DEVICE_MMC1:
 #ifdef CONFIG_SPL_FAT_SUPPORT
-		return MMCSD_MODE_FAT;
+		return MMCSD_MODE_FS;
 #else
 		return MMCSD_MODE_RAW;
 #endif

arch/arm/cpu/armv7/omap-common/boot-common.c

@@ -81,8 +81,8 @@ u32 spl_boot_mode(void)
 
 	if (val == MMCSD_MODE_RAW)
 		return MMCSD_MODE_RAW;
-	else if (val == MMCSD_MODE_FAT)
-		return MMCSD_MODE_FAT;
+	else if (val == MMCSD_MODE_FS)
+		return MMCSD_MODE_FS;
 	else
 #ifdef CONFIG_SUPPORT_EMMC_BOOT
 		return MMCSD_MODE_EMMCBOOT;

arch/arm/cpu/armv7/omap3/board.c

@@ -90,7 +90,7 @@ u32 spl_boot_mode(void)
 	case BOOT_DEVICE_MMC2:
 		return MMCSD_MODE_RAW;
 	case BOOT_DEVICE_MMC1:
-		return MMCSD_MODE_FAT;
+		return MMCSD_MODE_FS;
 		break;
 	default:
 		puts("spl: ERROR:  unknown device - can't select boot mode\n");

arch/arm/cpu/armv7/zynq/spl.c

@@ -63,7 +63,7 @@ u32 spl_boot_device(void)
 #ifdef CONFIG_SPL_MMC_SUPPORT
 u32 spl_boot_mode(void)
 {
-	return MMCSD_MODE_FAT;
+	return MMCSD_MODE_FS;
 }
 #endif
 

arch/arm/cpu/at91-common/spl.c

@@ -102,7 +102,7 @@ u32 spl_boot_mode(void)
 	switch (spl_boot_device()) {
 #ifdef CONFIG_SYS_USE_MMC
 	case BOOT_DEVICE_MMC1:
-		return MMCSD_MODE_FAT;
+		return MMCSD_MODE_FS;
 		break;
 #endif
 	case BOOT_DEVICE_NONE:

arch/arm/imx-common/spl.c

@@ -68,7 +68,7 @@ u32 spl_boot_mode(void)
 	case BOOT_DEVICE_MMC1:
 	case BOOT_DEVICE_MMC2:
 #ifdef CONFIG_SPL_FAT_SUPPORT
-		return MMCSD_MODE_FAT;
+		return MMCSD_MODE_FS;
 #else
 		return MMCSD_MODE_RAW;
 #endif

common/spl/spl_fat.c

@@ -106,18 +106,18 @@ int spl_load_image_fat_os(block_dev_desc_t *block_dev, int partition)
 defaults:
 #endif
 
-	err = file_fat_read(CONFIG_SPL_FAT_LOAD_ARGS_NAME,
+	err = file_fat_read(CONFIG_SPL_FS_LOAD_ARGS_NAME,
 			    (void *)CONFIG_SYS_SPL_ARGS_ADDR, 0);
 	if (err <= 0) {
 #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
 		printf("%s: error reading image %s, err - %d\n",
-		       __func__, CONFIG_SPL_FAT_LOAD_ARGS_NAME, err);
+		       __func__, CONFIG_SPL_FS_LOAD_ARGS_NAME, err);
 #endif
 		return -1;
 	}
 
 	return spl_load_image_fat(block_dev, partition,
-			CONFIG_SPL_FAT_LOAD_KERNEL_NAME);
+			CONFIG_SPL_FS_LOAD_KERNEL_NAME);
 }
 #endif
 #endif

common/spl/spl_mmc.c

@@ -101,15 +101,15 @@ void spl_mmc_load_image(void)
 		err = mmc_load_image_raw(mmc,
 			CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR);
 #ifdef CONFIG_SPL_FAT_SUPPORT
-	} else if (boot_mode == MMCSD_MODE_FAT) {
+	} else if (boot_mode == MMCSD_MODE_FS) {
 		debug("boot mode - FAT\n");
 #ifdef CONFIG_SPL_OS_BOOT
 		if (spl_start_uboot() || spl_load_image_fat_os(&mmc->block_dev,
-								CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION))
+								CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION))
 #endif
 		err = spl_load_image_fat(&mmc->block_dev,
-					CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION,
-					CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME);
+					CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION,
+					CONFIG_SPL_FS_LOAD_PAYLOAD_NAME);
 #endif
 #ifdef CONFIG_SUPPORT_EMMC_BOOT
 	} else if (boot_mode == MMCSD_MODE_EMMCBOOT) {

common/spl/spl_sata.c

@@ -42,7 +42,7 @@ void spl_sata_load_image(void)
 #endif
 	err = spl_load_image_fat(stor_dev,
 				CONFIG_SYS_SATA_FAT_BOOT_PARTITION,
-				CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME);
+				CONFIG_SPL_FS_LOAD_PAYLOAD_NAME);
 	if (err) {
 		puts("Error loading sata device\n");
 		hang();

common/spl/spl_usb.c

@@ -49,7 +49,7 @@ void spl_usb_load_image(void)
 #endif
 		err = spl_load_image_fat(stor_dev,
 				CONFIG_SYS_USB_FAT_BOOT_PARTITION,
-				CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME);
+				CONFIG_SPL_FS_LOAD_PAYLOAD_NAME);
 
 		if (err) {
 			puts("Error loading USB device\n");

include/configs/am3517_crane.h

@@ -304,8 +304,8 @@
 
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
+#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION	1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBDISK_SUPPORT

include/configs/am3517_evm.h

@@ -313,8 +313,8 @@
 
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
+#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION	1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBDISK_SUPPORT

include/configs/cm_t35.h

@@ -321,8 +321,8 @@
 
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
+#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION	1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_LIBCOMMON_SUPPORT

include/configs/devkit8000.h

@@ -298,8 +298,8 @@
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME        "u-boot.img"
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION    1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
+#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION    1
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
 
 #define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/
@@ -341,8 +341,8 @@
 					0x400000)
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
 
-#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME		"uImage"
-#define CONFIG_SPL_FAT_LOAD_ARGS_NAME		"args"
+#define CONFIG_SPL_FS_LOAD_KERNEL_NAME		"uImage"
+#define CONFIG_SPL_FS_LOAD_ARGS_NAME		"args"
 
 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x500 /* address 0xa0000 */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x8   /* address 0x1000 */

include/configs/imx6_spl.h

@@ -46,7 +46,7 @@
 #if defined(CONFIG_SPL_MMC_SUPPORT)
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	138 /* offset 69KB */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	800 /* 400 KB */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
+#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION	1
 #define CONFIG_SYS_MONITOR_LEN  (CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS/2*1024)
 #endif
 
@@ -58,7 +58,7 @@
 
 /* Define the payload for FAT/EXT support */
 #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME  "u-boot.img"
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME  "u-boot.img"
 #define CONFIG_SPL_LIBDISK_SUPPORT
 #endif
 

include/configs/mcx.h

@@ -372,8 +372,8 @@
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
 
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
+#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION	1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 
 /* NAND boot config */
 #define CONFIG_SYS_NAND_PAGE_COUNT	64

include/configs/omap3_evm.h

@@ -75,8 +75,8 @@
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
+#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION	1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 
 /* Partition tables */
 #define CONFIG_EFI_PARTITION

include/configs/omap3_evm_quick_mmc.h

@@ -87,7 +87,7 @@
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
+#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION	1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 
 #endif /* __OMAP3_EVM_QUICK_MMC_H */

include/configs/sama5d3_xplained.h

@@ -230,8 +230,8 @@
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
+#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION	1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_LIBDISK_SUPPORT
 

include/configs/sama5d3xek.h

@@ -276,8 +276,8 @@
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
+#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION	1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_LIBDISK_SUPPORT
 

include/configs/siemens-am33x-common.h

@@ -148,8 +148,8 @@
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
 
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
+#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION	1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_FS_FAT

include/configs/tao3530.h

@@ -305,8 +305,8 @@
 
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
+#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION	1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_LIBCOMMON_SUPPORT

include/configs/ti814x_evm.h

@@ -178,8 +178,8 @@
 
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION    1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME        "u-boot.img"
+#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION    1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SPL_FAT_SUPPORT
 

include/configs/ti816x_evm.h

@@ -144,8 +144,8 @@
 
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION    1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME        "u-boot.img"
+#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION    1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SPL_FAT_SUPPORT
 

include/configs/ti_armv7_common.h

@@ -232,13 +232,13 @@
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
 
 /* FAT sd card locations. */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
+#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION	1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 
 #ifdef CONFIG_SPL_OS_BOOT
 /* FAT */
-#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME		"uImage"
-#define CONFIG_SPL_FAT_LOAD_ARGS_NAME		"args"
+#define CONFIG_SPL_FS_LOAD_KERNEL_NAME		"uImage"
+#define CONFIG_SPL_FS_LOAD_ARGS_NAME		"args"
 
 /* RAW SD card / eMMC */
 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x900	/* address 0x120000 */

include/configs/tricorder.h

@@ -348,8 +348,8 @@
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME        "u-boot.img"
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION    1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
+#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION    1
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
 
 #define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/

include/configs/zynq-common.h

@@ -268,10 +268,10 @@
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION    1
+#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION    1
 #define CONFIG_SPL_LIBDISK_SUPPORT
 #define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME     "u-boot-dtb.img"
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME     "u-boot-dtb.img"
 #endif
 
 /* Disable dcache for SPL just for sure */
@@ -283,8 +283,8 @@
 /* Address in RAM where the parameters must be copied by SPL. */
 #define CONFIG_SYS_SPL_ARGS_ADDR	0x10000000
 
-#define CONFIG_SPL_FAT_LOAD_ARGS_NAME		"system.dtb"
-#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME		"uImage"
+#define CONFIG_SPL_FS_LOAD_ARGS_NAME		"system.dtb"
+#define CONFIG_SPL_FS_LOAD_KERNEL_NAME		"uImage"
 
 /* Not using MMC raw mode - just for compilation purpose */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0

include/spl.h

@@ -15,7 +15,7 @@
 /* Boot type */
 #define MMCSD_MODE_UNDEFINED	0
 #define MMCSD_MODE_RAW		1
-#define MMCSD_MODE_FAT		2
+#define MMCSD_MODE_FS		2
 #define MMCSD_MODE_EMMCBOOT	3
 
 struct spl_image_info {