- 17 6月, 2010 1 次提交
-
-
由 Albert Aribaud 提交于
This patch adds support for the LaCie ED Mini V2 product which is based on the Marvell Orion5x SoC. Signed-off-by: NAlbert Aribaud <albert.aribaud@free.fr>
-
- 15 6月, 2010 1 次提交
-
-
由 Minkyu Kang 提交于
This patch adds support for the Samsung Goni board (S5PC110 SoC) Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
- 11 6月, 2010 1 次提交
-
-
由 Sudhakar Rajashekhara 提交于
Provides initial support for TI OMAP-L138/DA850 SoC devices on a Logic PD EVM board. Provides: Initial boot and configuration. Support for i2c. UART support (console). Signed-off-by: NSudhakar Rajashekhara <sudhakar.raj@ti.com> Acked-by: NBen Gardiner <bengardiner@nanometrics.ca> Reviewed-by: NWolfgang Denk <wd@denx.de> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
- 08 6月, 2010 4 次提交
-
-
由 Vaibhav Hiremath 提交于
This patch adds basic support for the AM3517EVM. It includes: - Board files (.c and .h) - Default configuration file - Updates for Makefile Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: NSanjeev Premi <premi@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Cyril Chemparathy 提交于
TNETV107X is a Texas Instruments SoC based on an ARM1176 core, and with a bunch on on-chip integrated peripherals. This patch adds support for the TNETV107X EVM board. Signed-off-by: NCyril Chemparathy <cyril@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Vaibhav Hiremath 提交于
This patch adds basic support for the AM3517EVM. It includes: - Board files (.c and .h) - Default configuration file - Updates for Makefile Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: NSanjeev Premi <premi@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Cyril Chemparathy 提交于
TNETV107X is a Texas Instruments SoC based on an ARM1176 core, and with a bunch on on-chip integrated peripherals. This patch adds support for the TNETV107X EVM board. Signed-off-by: NCyril Chemparathy <cyril@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
- 06 6月, 2010 1 次提交
-
-
由 Asen Dimov 提交于
Add the new board PM9G45 from Ronetix GmbH. * AT91SAM9G45 MCU at 400Mhz. * 128MB DDR2 SDRAM * 256MB NAND * 10/100 MBits Ethernet DP83848 * Serial number chip DS2401 The board is made as SODIMM200 module. For more info www.ronatix.at or info@ronetix.at. Signed-off-by: NAsen Dimov <dimov@ronetix.at>
-
- 28 5月, 2010 1 次提交
-
-
由 Thomas Chou 提交于
The nios-32 arch is obsolete and broken. So it is removed. Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
-
- 30 4月, 2010 2 次提交
-
-
由 Siddarth Gore 提交于
GuruPlug Standard: 1 Gb Ethernet, 2 USB 2.0 GuruPlug Plus: 2 Gb Ethernet, 2 USB 2.0, 1 eSATA, 1 uSD slot References: http://www.globalscaletechnologies.com/t-guruplugdetails.aspx http://plugcomputer.org This patch is for GuruPlug Plus, but it supports Standard version as well. Signed-off-by: NSiddarth Gore <gores@marvell.com>
-
由 Heiko Schocher 提交于
This patch adds support for the magnesium board from projectiondesign. This board uses i.MX27 SoC and has 8MB NOR flash, 128MB NAND flash, FEC ethernet controller integrated into i.MX27. As this port is based on the imx27lite port, common config options are collected in include/configs/imx27lite-common.h Signed-off-by: NHeiko Schocher <hs@denx.de>
-
- 29 4月, 2010 1 次提交
-
-
由 Stefan Roese 提交于
This patch adds support for the Mosaix Technologies, Inc. ICON board, based on the AppliedMicro (AMCC) PPC440SPe. It's equipped with an SODIMM (512MB standard) and 64MByte of NOR FLASH. Support for the onboard SM502 will be added later. Signed-off-by: NStefan Roese <sr@denx.de>
-
- 25 4月, 2010 2 次提交
-
-
由 Thomas Chou 提交于
This is a generic approach to port u-boot for nios2 boards. You may find the usage of this approach on the nioswiki, http://nioswiki.com/DasUBoot A fpga parameter file, which contains base address information and drivers declaration, is generated from Altera's hardware system description sopc file using tools. The example fpga parameter file is compatible with EP1C20, EP1S10 and EP1S40 boards. So these boards can be removed after this commit. Though epcs controller is removed to cut the dependency of altera_spi driver. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Signed-off-by: NScott McNutt <smcnutt@psyent.com>
-
由 Anatolij Gustschin 提交于
PDM360NG is a MPC5121E based board by ifm ecomatic gmbh. Signed-off-by: NMichael Weiss <michael.weiss@ifm.com> Signed-off-by: NDetlev Zundel <dzu@denx.de> Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
- 10 4月, 2010 1 次提交
-
-
由 Andre Schwarz 提交于
Signed-off-by: NAndre Schwarz <andre.schwarz@matrix-vision.de>
-
- 07 4月, 2010 1 次提交
-
-
由 Brent Kandetzki 提交于
A low cost 4 port IP-PBX board. Signed-off-by: NBrent Kandetzki <BrentK@teleco.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 04 4月, 2010 2 次提交
-
-
由 Minkyu Kang 提交于
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Vipin KUMAR 提交于
Signed-off-by: NVipin Kumar <vipin.kumar@st.com>
-
- 25 3月, 2010 1 次提交
-
-
由 Wolfgang Wegner 提交于
This patch adds support for ASTRO board(s) based on MCF5373L. Signed-off-by: NWolfgang Wegner <w.wegner@astro-kom.de>
-
- 22 3月, 2010 1 次提交
-
-
由 Detlev Zundel 提交于
We do not support a processor that never reached a real customer. Signed-off-by: NDetlev Zundel <dzu@denx.de>
-
- 12 3月, 2010 1 次提交
-
-
由 Detlev Zundel 提交于
This code has compile problems and the company does not even exist any more. So we take the liberty to drop support for it. Signed-off-by: NDetlev Zundel <dzu@denx.de> CC: Wolfgang Denk <wd@denx.de> CC: Ben Warren <biggerbadderben@gmail.com>
-
- 08 3月, 2010 3 次提交
-
-
由 Heiko Schocher 提交于
Add support for the ARM part of the mgcoge2, named suen3. This board is based on the Marvell Kirkwood (88F6281) SoC. As there come more board variants, common config options are collected in include/configs/km_arm.h. Also, this board use common code for all keymile boards, which is stored in board/keymile/common/common.c Signed-off-by: NHolger Brunck <holger.brunck@keymile.com> Signed-off-by: NStefan Roese <sr@denx.de> Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 John Rigby 提交于
This is an i.MX25 base board with only NAND so it uses nand_spl to boot. Signed-off-by: NJohn Rigby <jcrigby@gmail.com> Tune configuration, add support for (redundant) environment in NAND. Signed-off-by: NWolfgang Denk <wd@denx.de> Acked-by: NWolfgang Denk <wd@denx.de> CC: Fred Fan <fanyefeng@gmail.com> CC: Tom <Tom.Rix@windriver.com>
-
由 Stefano Babic 提交于
The patch adds initial support for the Freescale mx51evk board. Network (FEC) and SD controller (fsl_esdhc) are supported. Signed-off-by: NStefano Babic <sbabic@denx.de> Signed-off-by: NFred Fan <fanyefeng@gmail.com>
-
- 13 2月, 2010 3 次提交
-
-
由 Jens Scharsig 提交于
* new board (eb_cpux9k2) * support for EB+CPUx9K2 board by BuS Elektronik GmbH & Co. KG * select via make eb_cpux9k2_config * this also demonstrates, how to use boards with AT91RM9200 cpu in at91 arch tree Signed-off-by: NJens Scharsig <js_at_ng@scharsoft.de>
-
由 Matthias Kaehlcke 提交于
Added support for the following EDB93xx boards: EDB9301 EDB9302 EDB9302A EDB9307 EDB9307A EDB93012 EDB9315 EDB9315A Signed-off-by: NMatthias Kaehlcke <matthias@kaehlcke.net>
-
由 Daniel Gorsulowski 提交于
This patch adds support for esd gmbh OTC570 board. The OTC570 is based on an Atmel AT91SAM9263 SoC. Signed-off-by: NDaniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
-
- 04 2月, 2010 1 次提交
-
-
由 Wolfgang Denk 提交于
The EXBITGEN board has not been maintained for a long time; it has build problems, but no hardware is available any more for testing. Drop support for this board. Signed-off-by: NWolfgang Denk <wd@denx.de> Acked-by: NStefan Roese <sr@denx.de>
-
- 19 1月, 2010 1 次提交
-
-
由 Alessandro Rubini 提交于
Signed-off-by: NAlessandro Rubini <rubini@unipv.it>
-
- 17 1月, 2010 3 次提交
-
-
由 Harald Krapfenbauer 提交于
Signed-off-by: NHarald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Michael Hennerich 提交于
The new board revision has a different LCD. Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Valentin Yakovenkov 提交于
Signed-off-by: NValentin Yakovenkov <yakovenkov@niistt.ru> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 08 1月, 2010 1 次提交
-
-
由 Reinhard Arlt 提交于
The caddy2 is a variant of the already supported vme8349. So we just add the differences to this board port. To better support those two boards we switched from fixed SDRAM configuration to usage of spd_sdram(). This is done by providing a board specific SPD EEPROM routine with different values for both boards. Signed-off-by: NReinhard Arlt <reinhard.arlt@esd.eu> Signed-off-by: NStefan Roese <sr@denx.de> changed to use mkconfig -t option instead, plus misc codingstyle fixes. Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
- 03 12月, 2009 1 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Becky Bruce <beckyb@kernel.crashing.org>
-
- 28 11月, 2009 2 次提交
-
-
由 Po-Yu Chuang 提交于
This patch adds support for A320 evaluation board from Faraday. This board uses FA526 processor by default and has 512kB and 32MB NOR flash, 64M RAM. FA526 is an ARMv4 processor and uses the ARM920T source in this patch. Signed-off-by: NPo-Yu Chuang <ratbert@faraday-tech.com>
-
由 Sekhar Nori 提交于
Integrate DA830 EVM support into U-Boot. Provides initial support for TI OMAP-L137/DA830 SoC devices on a Spectrum Digital EVM board. See http://www.spectrumdigital.com/Signed-off-by: NNick Thompson <nick.thompson@gefanuc.com>
-
- 31 10月, 2009 1 次提交
-
-
由 Wolfgang Grandegger 提交于
This patch adds support for the board IPEK01 based on the MPC5200. The Futjitsu Lime graphics controller is configured in 16 bpp mode. Signed-off-by: NWolfgang Grandegger <wg@denx.de>
-
- 24 10月, 2009 1 次提交
-
-
由 Tom Rix 提交于
Start of support of Texas Instruments Software Development Platform(SDP) for OMAP3430 - SDP3430 Highlights of this platform are: Flash Memory devices: Sibley NOR, Micron 8bit NAND and OneNAND Connectivity: 3 UARTs and expanded 4 UART ports + IrDA Ethernet, USB Other peripherals: TWL5030 PMIC+Audio+Keypad VGA display Expansion ports: Memory devices plugin boards (PISMO) Connectivity board for GPS,WLAN etc. Completely configurable boot sequence and device mapping etc. Support default jumpering and: - UART1/ttyS0 console(legacy sdp3430 u-boot) - UART3/ttyS2 console (matching other boards, and SDP HW docs) - Ethernet - mmc0 - NOR boot Currently the UART1 is enabled by default. for compatibility with other OMAP3 u-boot platforms, enable the #define of CONSOLE_J9. Conflicts: Makefile Fixed the conflict with smdkc100_config by moving omap_sdp3430_config to it is alphabetically sorted location above zoom1. Signed-off-by: NDavid Brownell <david-b@pacbell.net> Signed-off-by: NNishanth Menon <nm@ti.com> Signed-off-by: NTom Rix <Tom.Rix@windriver.com>
-
- 19 10月, 2009 2 次提交
-
-
由 Sandeep Paulraj 提交于
Adding entries to the MAINTAINERS directory for the DM355 and DM365 EVM. Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Sandeep Paulraj 提交于
This patch adds support for the leopard board which is based on the DM355 SOC. Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-